v15 ball valve gachot® - pvi valves
TRANSCRIPT
PICARDIEVALVESINDUSTRIES
-196 °C 700 °C
100 bar
DN250
-40°C
0
DN8
100
280 °C
DN50
P V IFRENCH MANUFACTURER OF INDUSTRIAL VALVES2 Rue du Marais 80400 Ham, FRANCE +33 (0)3 23 81 43 00 [email protected] w w w. p v i - v a l v e s . c o m
PVI-0015-ENG-2011
This document is the exclusive property of Picardie Valves Industries. The use, reproduction, communication to third parties of this document must be subject to prior written authorization from us. The information contained in this document is given for information purposes only.
V15V15 BALL VALVEGACHOT®
Performance
The maximum pressures and temperatures depend on the pressure / temperature ratio and the type of fluid.
Technology 3-Piece Technology and Floating Sphere
Face to Face EN 12982 / EN 558 Series 1
Design standard EN 13445 / DIN 3840 / EN 12516.3
Tightness standard NF EN 12266 / ISO 5208
Flange standard EN 1092-1 / EN 1759-1 / ISO 7005
Cable gland Anti-ejection and anti-loosening system with force resumption guaranteeing a perfect seal with a series of gaskets.
Base Built-in ISO base for simplified motorization.
Body Sealing maintenance eased by the accessibility of the central part.
Flanges Trapezoidal shape for maintenance without disassembling the fastening elements.
End caps
Available in weld (BW and SW), threaded gas / conical gas / NPT, with flanges (PN, Class), or other on request
Ball• Built-in relief system as standard.• Reduced pressure drop due to its design.• Specific finish on request.
Tightness Two lip seats coupled with two body seals guarantee tightness.
End fittings and flanges
360° orientation of the valve on the pipework thanks to the rotating flange system.
Lockable lever
Lockable lever with stainless steel trigger as standard.
Approvals
Temperature,°C
Pressure, bar
Diameter, mm
Kv OPTIMUM
FOLLOW-UP & ADVICE
100%TESTED VALVES
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
0 20 40 60 80 100
120
140
160
180
200
220
240
260
280
PRES
SION
EN
BAR
TEMPERATURE °C
PEEKDN15 - DN25 et/and DN8I*- DN20* DN32 et/and DN25 DN40 - DN50 et/and DN32*- DN40*
9
6
3
8
2
1
5
4
7
0
10
20
30
40
50
60
70
80
90
100
110
-100 -8
0
-60
-40
-20 0 20 40 60 80 100
120
140
160
180
200
PRES
SION
EN
BAR
TEMPERATURE °C
PTFE + 15% verreDN15 - DN32 et/and DN8I*- DN25* DN40 - DN50 et/and DN32*- DN40*
0
10
20
30
40
50
60
70
80
90
100
110
-196
-160
-120 -8
0
-40 0 40 80 100
120
140
160
180
200
220
240
250
PRES
SION
EN
BAR
TEMPERATURE °C
PTFE + 25% carboneDN15 - DN32 et/and DN8I*- DN25* DN40 - DN50 et/and DN32*- DN40*
0
10
20
30
40
50
60
70
80
90
100
110
-100 -8
0
-60
-40
-20 0 20 40 60 80 100
120
140
160
180
200
PRES
SION
EN
BAR
TEMPERATURE °C
PTFEDN15 - DN32 et/and DN8I*- DN25* DN40 - DN50 et/and DN32*- DN40*
This document is the exclusive property of Picardie Valves Industries. The use, reproduction, communication to third parties of this document must be subject to prior written authorization from us. The information contained in this document is given for information purposes only.
PVI-0015-ENG-2011
Part List
Designation Materials
1 BodyCarbon steel 1.0619 / A216 WCB
Stainless steel 1.4408 / CF8M
2 Ball Stainless steel 1.4408
3 Stem Stainless steel 1.4404 / 316L
4 Body gasketsPTFE / TFM / PTFE stainless steel / PTFE carbon / Graphite / PEEK /
5 Seats (1)
PTFE / TFM / PTFE stainless steel / PTFE carbon / PTFE glass / PEEK /
6 Trim (1)PTFE / TFM / PTFE Stain-less Steel / PTFE Carbon / Graphite / PEEK /
7 End pieces Carbon steel 1.0619 / WCB
Stainless steel 1.4408 / CF8M
8 Flanges Stainless steel 1.4408 / CF8M
9 Lever Stainless steel 1.4301 / 304
(1) Others on request
Seat Pressure / Temperature curves **
(*) Full bore(**) Other pressure / temperature curves available on our website www.pvi-valves.comPlease always check the maximum values for the characteristics of the body, as the curves above only show the characteristics according to the seat material
PRES
SURE
IN B
AR
PRES
SURE
IN B
AR
PRES
SURE
IN B
AR
PRES
SURE
IN B
AR
PTFE PTFE + 15% GLASS
PEEKPTFE + 25% CARBON