v show commands - cisco ·...

136
V Show Commands show vdc, page 4 show vdc current-vdc, page 6 show vdc fcoe-vlan-range, page 7 show vdc resource (res_mgr), page 8 show vdc resource (res_mgr), page 9 show vdc resource template, page 11 show version, page 12 show version compatibility, page 14 show version fex, page 15 show version image, page 16 show version module, page 17 show version module epld, page 18 show virtual-service, page 19 show virtual-service storage pool list, page 23 show virtual-service tech-support, page 24 show virtual-service utilization name, page 25 show virtual-service version, page 28 show vlan-mgr errors, page 29 show vlan-mgr event-history, page 30 show vlan, page 31 show vlan access-list, page 34 show vlan access-map, page 44 show vlan all-ports, page 46 show vlan counters, page 48 Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 1

Upload: others

Post on 30-Jan-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

  • V Show Commands

    • show vdc, page 4

    • show vdc current-vdc, page 6

    • show vdc fcoe-vlan-range, page 7

    • show vdc resource (res_mgr), page 8

    • show vdc resource (res_mgr), page 9

    • show vdc resource template, page 11

    • show version, page 12

    • show version compatibility, page 14

    • show version fex, page 15

    • show version image, page 16

    • show version module, page 17

    • show version module epld, page 18

    • show virtual-service, page 19

    • show virtual-service storage pool list, page 23

    • show virtual-service tech-support, page 24

    • show virtual-service utilization name, page 25

    • show virtual-service version, page 28

    • show vlan-mgr errors, page 29

    • show vlan-mgr event-history, page 30

    • show vlan, page 31

    • show vlan access-list, page 34

    • show vlan access-map, page 44

    • show vlan all-ports, page 46

    • show vlan counters, page 48

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 1

  • • show vlan dot1Q tag native, page 50

    • show vlan filter, page 51

    • show vlan id, page 52

    • show vlan id counters, page 55

    • show vlan id vn-segment, page 57

    • show vlan mib private-vlan type, page 58

    • show vlan name, page 60

    • show vlan private-vlan, page 63

    • show vlan private-vlan interface host, page 64

    • show vlan private-vlan interface mapping, page 65

    • show vlan private-vlan interface mode, page 66

    • show vlan private-vlan interface trunk, page 67

    • show vlan private-vlan mapping, page 69

    • show vlan private-vlan type, page 70

    • show vlan reserved, page 72

    • show vlan xbrief, page 74

    • show vlan xsummary, page 76

    • show vpc (mcecm), page 77

    • show vpc (mcecm), page 82

    • show vpc consistency-parameters, page 96

    • show vpc consistency-parameters vlans, page 97

    • show vpc orphan-ports, page 101

    • show vpc peer-keepalive, page 102

    • show vpc role, page 105

    • show vpc statistics, page 108

    • show vpc statistics peer-keepalive, page 109

    • show vrf, page 110

    • show vrf interface, page 112

    • show vrf topology, page 113

    • show vrrp, page 114

    • show vrrp bfd-sessions, page 118

    • show vtp counters, page 120

    • show vtp datafile, page 122

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)2

    V Show Commands

  • • show vtp domain id, page 123

    • show vtp interface, page 125

    • show vtp mibstats, page 126

    • show vtp password, page 127

    • show vtp status, page 128

    • show vtp trunk interface, page 131

    • show vtp vlan, page 133

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 3

    V Show Commands

  • show vdcshow vdc [ e-vdc2 ] [feature-set| detail|membership [all| status|module module]| shared membership][__readonly__ [detail2] [ swmode ] TABLE_vdc vdc_id vdc_name state mac hap sw boot_order [prioprio_per] [ create_time ] [ reload_count ] [ restart_count ] [ restart_time ] [ restart_reason ] vtype lc-support[TABLE_fs fs_id fs_name] [TABLE_port port-list]]

    Syntax Description Show Virtual Device Contextsshow

    Show Virtual Device Contextsvdc

    Type: userdef

    Enter Virtual Device Context

    e-vdc2

    Show detailed vdc informationdetail

    Show vdc interface membership informationmembership

    Show the shared interfaces in a vdcshared

    Show the shared interfaces in a vdcmembership

    Show vdc interface membership information for a specific moduleonly

    module

    Type: integer

    Show vdc interface membership information for a specific moduleonly

    module

    Show vdc related port-statusstatus

    Show vdc feature-set informationfeature-set

    Show offline modules as wellall

    Read Only__readonly__

    detail2

    Type: stringswmode

    TABLE_vdc

    Type: uinteger

    vdc-id

    vdc_id

    TABLE_port

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)4

    V Show Commandsshow vdc

  • Type: interface

    port membership for VDC

    port-list

    Type: string

    vdc-name

    vdc_name

    Type: string

    state

    state

    Type: string

    mac address for VDC

    mac

    Type: string

    hap policy

    hap

    Type: string

    sw policy

    sw

    Type: stringvtype

    Type: stringlc-support

    Type: datecreate_time

    Type: uintegerreload_count

    Type: uintegerrestart_count

    Type: daterestart_time

    Type: stringrestart_reason

    TABLE_fs

    Type: uinteger

    fs id

    fs_id

    Type: stringfs_name

    Type: integerboot_order

    Type: integerprio

    Type: integerprio_per

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 5

    V Show Commandsshow vdc

  • show vdc current-vdcshow vdc current-vdc [__readonly__ mode name]

    Syntax Description Show Virtual Device Contextsshow

    Show Virtual Device Contextsvdc

    Show which vdc you are currently incurrent-vdc

    Read Only__readonly__

    Type: uinteger

    cli mode

    mode

    Type: string

    vdc name

    name

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)6

    V Show Commandsshow vdc current-vdc

  • show vdc fcoe-vlan-rangeshow vdc fcoe-vlan-range [__readonly__ fcoe-vdc [ fcoe-vlans ] [ sharing-vdcs ]]

    Syntax Description Show Virtual Device Contextsshow

    Show Virtual Device Contextsvdc

    vlans reserved for FCoE Not available in this release.fcoe-vlan-range

    Read Only__readonly__

    Type: uintegerfcoe-vdc

    Type: uintegersharing-vdcs

    Type: integer-mrangefcoe-vlans

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 7

    V Show Commandsshow vdc fcoe-vlan-range

  • show vdc resource (res_mgr)show vdc id resource [ res-mgr-res-known-name ] [__readonly__ TABLE_vdc_resource_single_vdcres_name min max used unused free]

    Syntax Description Show running system informationshow

    Show Virtual Device Contextsvdc

    Type: userdef

    Enter Virtual Device Context

    id

    Show resource configuration for VDCresource

    Type: string

    Resource name

    res-mgr-res-known-name

    Read Only__readonly__

    Type: string

    Resource Name

    res_name

    Type: uinteger

    Resource min configuration

    min

    Type: uinteger

    Resource max configuration

    max

    Type: uinteger

    Resource current usage for this VDC

    used

    Type: uinteger

    Resource reserved for this VDC but currently not used

    unused

    Type: uinteger

    Resource current free for this VDC

    free

    TABLE_vdc_resource_single_vdc

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)8

    V Show Commandsshow vdc resource (res_mgr)

  • show vdc resource (res_mgr)show vdc resource [ res-mgr-res-known-name ] [detail| hidden-too| with-flags]+ [__readonly__TABLE_resource resource_name total_used total_unused total_free total_avail total[TABLE_vdc_resource_across_vdcs vdc_name min max used unused free]]

    Syntax Description Show running system informationshow

    Show Virtual Device Contextsvdc

    Show resource configuration across VDCsresource

    Type: string

    Resource name

    res-mgr-res-known-name

    Show detail resource configurationdetail

    Also show hidden resourceshidden-too

    Also show resource flagswith-flags

    Read Only__readonly__

    TABLE_resource

    Type: string

    Resource Name

    resource_name

    Type: uinteger

    Resource current usage for all VDC

    total_used

    Type: uinteger

    Resources currently reserved but not used across all VDC

    total_unused

    Type: uinteger

    Resource current free for all VDC

    total_free

    Type: uinteger

    Resource current available across all VDC

    total_avail

    Type: uinteger

    Resources grand total

    total

    TABLE_vdc_resource_across_vdcs

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 9

    V Show Commandsshow vdc resource (res_mgr)

  • Type: string

    VDC name

    vdc_name

    Type: uinteger

    Resource min configuration

    min

    Type: uinteger

    Resource max configuration

    max

    Type: uinteger

    Resource current usage for this VDC

    used

    Type: uinteger

    Resource reserved for this VDC but currently not used

    unused

    Type: uinteger

    Resource current free for this VDC

    free

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)10

    V Show Commandsshow vdc resource (res_mgr)

  • show vdc resource templateshow vdc resource template [ res-mgr-template-known-name-all ] [__readonly__ TABLE_templatetemplate_name TABLE_resource resource_name min max]

    Syntax Description Show running system informationshow

    Show Virtual Device Contextsvdc

    Show resource configuration for VDCresource

    Resource template configurationtemplate

    Type: string

    pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

    length: 100

    Resource template name

    res-mgr-template-known-name-all

    Read Only__readonly__

    TABLE_template

    Type: string

    Resource Template Name

    template_name

    TABLE_resource

    Type: string

    Resource Name

    resource_name

    Type: uinteger

    Resource min configuration

    min

    Type: uinteger

    Resource max configuration

    max

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 11

    V Show Commandsshow vdc resource template

  • show versionshow version [__readonly__ header_str bios_ver_str [ loader_ver_str ] kickstart_ver_str [ sys_ver_str ]bios_cmpl_time kick_file_name kick_cmpl_time kick_tmstmp [ isan_file_name ] [ isan_cmpl_time ][ isan_tmstmp ] chassis_id module_id cpu_name memory mem_type proc_board_id host_name bootflash_size[ slot0_size ] kern_uptm_days kern_uptm_hrs kern_uptm_mins kern_uptm_secs [ rr_usecs ] [ rr_ctime ]rr_reason rr_sys_ver rr_service [TABLE_smu_list install_smu_id+] manufacturer]

    Syntax Description Show the software versionversion

    __readonly__

    Type: stringheader_str

    Type: stringbios_ver_str

    Type: stringloader_ver_str

    Type: stringkickstart_ver_str

    Type: stringsys_ver_str

    Type: stringbios_cmpl_time

    Type: stringkick_file_name

    Type: stringkick_cmpl_time

    Type: stringkick_tmstmp

    Type: stringisan_file_name

    Type: stringisan_cmpl_time

    Type: stringisan_tmstmp

    Type: stringchassis_id

    Type: stringmodule_id

    Type: stringcpu_name

    Type: integermemory

    Type: stringmem_type

    Type: stringproc_board_id

    Type: stringhost_name

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)12

    V Show Commandsshow version

  • Type: integerbootflash_size

    Type: integerslot0_size

    Type: integerkern_uptm_days

    Type: integerkern_uptm_hrs

    Type: integerkern_uptm_mins

    Type: integerkern_uptm_secs

    Type: integerrr_usecs

    Type: daterr_ctime

    Type: stringrr_reason

    Type: stringrr_sys_ver

    Type: stringrr_service

    TABLE_smu_list

    Type: stringinstall_smu_id

    Type: stringmanufacturer

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 13

    V Show Commandsshow version

  • show version compatibilityshow version compatibility uri0

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software compatibility matrix with given imagecompatibility

    Type: uri

    Enter URI

    uri0

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)14

    V Show Commandsshow version compatibility

  • show version fexshow version fex i

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show fex software versionfex

    Type: integer

    min: 100 max: 199

    Enter FEX identifier

    i

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 15

    V Show Commandsshow version fex

  • show version imageshow version image uri0

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software version of a given imageimage

    Type: uri

    Enter URI

    uri0

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)16

    V Show Commandsshow version image

  • show version moduleshow version module module [__readonly__ TABLE_version slot type sw interim bios]

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software version of a Modulemodule

    Type: integer

    Enter module number

    module

    __readonly__

    Show version infoTABLE_version

    Type: uinteger

    Slot

    slot

    Type: string

    image type

    type

    Type: string

    SW version

    sw

    Type: string

    SW interim version

    interim

    Type: string

    BIOS version

    bios

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 17

    V Show Commandsshow version module

  • show version module epldshow version module module epld

    Syntax Description Show running system informationshow

    Show the software versionversion

    Show the software version of a Modulemodule

    Type: integer

    Enter module number

    module

    Show a module's current EPLD versionsepld

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)18

    V Show Commandsshow version module epld

  • show virtual-serviceshow virtual-service [list| global| detail [name virt_serv_name]| core [name virt_serv_name_core]][__readonly__ [infrastructure_major_version infrastructure_minor_version total_virtual_services_installedtotal_virtual_services_activated maximum_vcpus_per_virtual_service machine_types_supportedmachine_types_disabled TABLE_resource_limits media_name quota committed available] [TABLE_listname status package_name] [TABLE_detail name package_name application_name application_versionapplication_description key_type signing_method licensing_name licensing_version ova_path statedisk_reservation memory_reservation cpu_reservation TABLE_attached_devices type name alias][TABLE_core name name_core]]

    Syntax Description Show running system informationshow

    Display virtualization service informationvirtual-service

    Virtual service global informationglobal

    List virtual serviceslist

    Detailed informationdetail

    Core informationcore

    Information for a specific virtual servicename

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name_core

    Read Only__readonly__

    Type: uinteger

    Infrastructure major version

    infrastructure_major_version

    Type: uinteger

    Infrastructure minor version

    infrastructure_minor_version

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 19

    V Show Commandsshow virtual-service

  • Type: uinteger

    Total virtual services installed

    total_virtual_services_installed

    Type: uinteger

    Total virtual services activated

    total_virtual_services_activated

    Type: uinteger

    Maximum VCPUs per virtual service

    maximum_vcpus_per_virtual_service

    Type: string

    Machine types supported

    machine_types_supported

    Type: string

    Machine types disabled

    machine_types_disabled

    Virtual service global resource limitsTABLE_resource_limits

    Type: string

    Resource name

    media_name

    Type: uinteger

    Resource Virtualization quota

    quota

    Type: uinteger

    Resource Virtualization committed

    committed

    Type: uinteger

    Resource Virtualization available

    available

    Virtual service list tableTABLE_list

    Type: string

    Virtual service name

    name

    Type: string

    Virtual service status

    status

    Type: string

    Virtual service package name

    package_name

    Virtual service detail tableTABLE_detail

    Type: string

    Virtual service name

    name

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)20

    V Show Commandsshow virtual-service

  • Type: string

    Virtual service package name

    package_name

    Type: string

    Name of the application

    application_name

    Type: string

    Version of the application

    application_version

    Type: string

    Description of the application

    application_description

    Type: string

    Virtual service key type

    key_type

    Type: string

    Method used to sign the package

    signing_method

    Type: string

    Name of the license

    licensing_name

    Type: string

    Version of the license

    licensing_version

    Type: string

    Virtual service OVA path

    ova_path

    Type: string

    Virtual service state

    state

    Type: uinteger

    Virtual service disk reservation

    disk_reservation

    Type: uinteger

    Virtual service memory reservation

    memory_reservation

    Type: uinteger

    Virtual service CPU reservation

    cpu_reservation

    Attached devices tableTABLE_attached_devices

    Type: string

    Type of the attached device

    type

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 21

    V Show Commandsshow virtual-service

  • Type: string

    Name of the attached device

    name

    Type: string

    Alias for the attached device

    alias

    Virtual service core tableTABLE_core

    Type: string

    Virtual service name

    name

    Type: string

    Name of core

    name_core

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)22

    V Show Commandsshow virtual-service

  • show virtual-service storage pool listshow virtual-service storage pool list [__readonly__ [TABLE_storage pool_name pool_type pool_path]]

    Syntax Description Show running system informationshow

    Display virtualization service storage pool informationvirtual-service

    Storage information about virtual servicestorage

    Storage pool information about virtual servicepool

    List storage pool for virtual servicelist

    Read Only__readonly__

    Virtual service storage pool list tableTABLE_storage

    Type: string

    Virtual service storage pool name

    pool_name

    Type: string

    Virtual service storage pool type

    pool_type

    Type: string

    Virtual service storage pool path

    pool_path

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 23

    V Show Commandsshow virtual-service storage pool list

  • show virtual-service tech-supportshow virtual-service tech-support

    Syntax Description Show running system informationshow

    Gather information for virtualization services trouble shootingvirtual-service

    Gather information for trouble shootingtech-support

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)24

    V Show Commandsshow virtual-service tech-support

  • show virtual-service utilization nameshow virtual-service utilization name virt_serv_name [__readonly__ [TABLE_storage name alias rd_byteswr_bytes rd_requests wr_requests errors capacity used available usage] [TABLE_network name aliasrx_packets tx_packets rx_bytes tx_bytes rx_drops tx_drops rx_errors tx_errors] [TABLE_memory allocationused] [TABLE_cpu request actual state]]

    Syntax Description Show running system informationshow

    Display virtualization service utilization informationvirtual-service

    Utilization information about virtual serviceutilization

    Utilization of a virtual servicename

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name

    Read Only__readonly__

    Virtual service storage utilizationTABLE_storage

    Type: string

    storage device name

    name

    Type: string

    storage device alias

    alias

    Type: uinteger

    Read Bytes

    rd_bytes

    Type: uinteger

    Write Bytes

    wr_bytes

    Type: uinteger

    Read requests

    rd_requests

    Type: uinteger

    Write requests

    wr_requests

    Type: uinteger

    errors

    errors

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 25

    V Show Commandsshow virtual-service utilization name

  • Type: uinteger

    Capacity 1k blocks

    capacity

    Type: uinteger

    Used 1k blocks

    used

    Type: uinteger

    Available 1k blocks

    available

    Type: uinteger

    Usage

    usage

    Virtual service network utilizationTABLE_network

    Type: string

    network device name

    name

    Type: string

    network device alias

    alias

    Type: uinteger

    Received packets

    rx_packets

    Type: uinteger

    Transmitted packets

    tx_packets

    Type: uinteger

    Received bytes

    rx_bytes

    Type: uinteger

    Transmitted bytes

    tx_bytes

    Type: uinteger

    Received drops

    rx_drops

    Type: uinteger

    Transmitted drops

    tx_drops

    Type: uinteger

    Received errors

    rx_errors

    Type: uinteger

    Trnasmitted errors

    tx_errors

    Virtual service memory utilizationTABLE_memory

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)26

    V Show Commandsshow virtual-service utilization name

  • Type: uinteger

    Memory allocation

    allocation

    Type: uinteger

    Memory used

    used

    Virtual service cpu utilizationTABLE_cpu

    Type: uinteger

    Requested Application Utilization

    request

    Type: uinteger

    Actual Application Utilization

    actual

    Type: string

    CPU state

    state

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 27

    V Show Commandsshow virtual-service utilization name

  • show virtual-service versionshow virtual-service version {installed| name virt_serv_name installed} [__readonly__ virt_service_nameapplication_name application_version]

    Syntax Description Show running system informationshow

    Display virtualization service version informationvirtual-service

    Version information about virtual serviceversion

    Installed versioninstalled

    Version of a virtual servicename

    Type: string

    pattern: [a-zA-Z0-9_]+

    length: 20

    Name of a virtual service

    virt_serv_name

    Read Only__readonly__

    Type: string

    Virtual service name

    virt_service_name

    Type: string

    Application name

    application_name

    Type: string

    Application version

    application_version

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)28

    V Show Commandsshow virtual-service version

  • show vlan-mgr errorsshow vlan-mgr errors

    Syntax Description Show running system informationshow

    Show vlan manager event historyvlan-mgr

    Show vlan manager errorserrors

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 29

    V Show Commandsshow vlan-mgr errors

  • show vlan-mgr event-historyshow vlan-mgr event-history

    Syntax Description Show running system informationshow

    Show vlan manager event historyvlan-mgr

    Show vlan manager event historyevent-history

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)30

    V Show Commandsshow vlan-mgr event-history

  • show vlanshow vlan [__readonly__ vlanshowbr-hdr TABLE_vlanbrief vlanshowbr-vlanid vlanshowbr-vlanid-utfvlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ] vlanshowinfo-mtu-hdrTABLE_mtuinfo vlanshowinfo-vlanid vlanshowinfo-media-type vlanshowinfo-vlanmode[ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ] [ vlanshowrspan-hdr2 ] [ vlanshowrspan-vlanbitmap ][ pvlan-hdr ] [ pvlan-section ] [ pvlan-stby ] show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbrief

    MTU information table formatTABLE_mtuinfo

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 31

    V Show Commandsshow vlan

  • Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Vlan info mtu header

    vlanshowinfo-mtu-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-vlanid

    Select media type

    enet value: 1

    Vlan type Ethernet

    vlanshowinfo-media-type

    VLAN brief VLAN mode

    ce-vlan value: 0

    Classical Ethernet VLAN mode

    fabricpath-vlan value: 1

    Fabricpath VLAN mode

    vlanshowinfo-vlanmode

    Type: uinteger

    RSPAN VLAN header for one VLAN

    vlanshowrspan-hdr1

    Type: uinteger

    RSPAN VLAN header for multiple VLANs

    vlanshowrspan-hdr2

    RSPAN VLAN one VLAN rspan or non-rspan

    rspan value: 2

    VLAN is RSPAN VLAN

    notrspan value: 1

    VLAN is not RSPAN VLAN

    vlanshowrspan-vlantype

    Type: bitmap

    RSPAN VLAN multiple VLANs

    vlanshowrspan-vlanbitmap

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)32

    V Show Commandsshow vlan

  • Type: uinteger

    private vlan section

    pvlan-hdr

    Type: uinteger

    private vlan section

    pvlan-section

    Type: uinteger

    private vlan section on standby

    pvlan-stby

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 33

    V Show Commandsshow vlan

  • show vlan access-listshow vlan access-list name [ inp_seqno ] [__readonly__ TABLE_vacl vacl_name [ vacl_seqno ] [TABLE_listip_ipv6_mac acl_name [TABLE_seqno seqno {permitdeny [proto_str| proto| ip| ipv6] {src_any| src_ip_prefix|src_ip_addr src_ip_mask| src_ipv6_prefix| src_ipv6_addr src_ipv6_mask|mac_src mac_src_wild| src_addrgrp}[src_port_op [ src_port1_str ] src_port1_num [src_port2_str| src_port2_num]| src_portgrp] {dest_any|dest_ip_prefix| dest_ip_addr dest_ip_mask| dest_ipv6_prefix| dest_ipv6_addr dest_ipv6_mask| mac_destmac_dest_wild| dest_addrgrp} [dest_port_op [ dest_port1_str ] dest_port1_num [dest_port2_str|dest_port2_num]| dest_portgrp] [{icmp_type [ icmp_code ]| icmp_str}| {icmpv6_type [ icmpv6_code ]|icmpv6_str}] [igmp_type| igmp_type_str] [[precedence| precedence_str] [tos| tos_str]| [dscp| dscp_str]] [ log ][ capture_session ] [ fragments ] [plen_op plen1 [ plen2 ]] [ urg ] [ ack ] [ psh ] [ rst ] [ syn ] [ fin ] [ established ][ flow_label ] [ timerange ] [eth_proto| eth_proto_str] [ vlan ] [ cos ] [ match_count ]| remark}]]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    Vlan access listaccess-list

    Type: string

    length: 64

    List name

    name

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    inp_seqno

    Type: string

    length: 64

    List name

    vacl_name

    __readonly__

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    vacl_seqno

    TABLE_vacl

    TABLE_list

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)34

    V Show Commandsshow vlan access-list

  • IP/iIPV6/MAC

    ip value: 9

    Display IP information

    mac value: 11

    MAC configuration commands

    ipv6 value: 10

    Configure IPv6 features

    ip_ipv6_mac

    Type: string

    length: 64

    Access list name

    acl_name

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    Permit/deny

    permit value: 2

    Specify packets to forward

    deny value: 3

    Specify packets to reject

    permitdeny

    Type: uinteger

    min: 0 max: 255

    A protocol number

    proto

    TABLE_seqno

    Type: string

    Protocol name

    proto_str

    IP

    ip value: 1

    IP Protocol

    ip

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 35

    V Show Commandsshow vlan access-list

  • IPV6

    ipv6 value: 1

    IPv6 Protocol

    ipv6

    SRCAny

    any value: 1

    Any IP address

    src_any

    DESTAny

    any value: 1

    Any IP address

    dest_any

    Type: ipprefix

    Source IP prefix

    src_ip_prefix

    Type: ipaddr

    Source IP address

    src_ip_addr

    Type: ipaddr

    Source IP mask

    src_ip_mask

    Type: ipv6prefix

    Source IPv6 prefix

    src_ipv6_prefix

    Type: ipv6addr

    Source IP address

    src_ipv6_addr

    Type: ipv6addr

    Source IP mask

    src_ipv6_mask

    Type: ethernet

    Source MAC address

    mac_src

    Type: ethernet

    Source MAC mask

    mac_src_wild

    Type: ipprefix

    Destination IP prefix

    dest_ip_prefix

    Type: ipaddr

    Destination IP address

    dest_ip_addr

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)36

    V Show Commandsshow vlan access-list

  • Type: ipaddr

    Destination IP mask

    dest_ip_mask

    Type: ipv6prefix

    Destination IPv6 prefix

    dest_ipv6_prefix

    Type: ipv6addr

    Destination IP address

    dest_ipv6_addr

    Type: ipv6addr

    Destination IP mask

    dest_ipv6_mask

    Type: ethernet

    Destination MAC address

    mac_dest

    Type: ethernet

    Destination MAC mask

    mac_dest_wild

    Source Port operator

    lt value: 4

    Match only packets with a lower port number

    gt value: 5

    Match only packets with a greater port number

    eq value: 6

    Match only packets on a given port number

    neq value: 7

    Match only packets not on a given port number

    range value: 8

    Match only packets in the range of port numbers

    src_port_op

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 37

    V Show Commandsshow vlan access-list

  • Destination Port operator

    lt value: 4

    Match only packets with a lower port number

    gt value: 5

    Match only packets with a greater port number

    eq value: 6

    Match only packets on a given port number

    neq value: 7

    Match only packets not on a given port number

    range value: 8

    Match only packets in the range of port numbers

    dest_port_op

    Type: string

    Source port name

    src_port1_str

    Type: uinteger

    Source port number

    src_port1_num

    Type: string

    Source port name

    src_port2_str

    Type: uinteger

    Source port number

    src_port2_num

    Type: string

    Destination port name

    dest_port1_str

    Type: uinteger

    Destination port number

    dest_port1_num

    Type: string

    Destination port name

    dest_port2_str

    Type: uinteger

    Destination port number

    dest_port2_num

    Type: uinteger

    ICMP type

    icmp_type

    Type: uinteger

    ICMP code

    icmp_code

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)38

    V Show Commandsshow vlan access-list

  • Type: string

    ICMP message

    icmp_str

    Type: uinteger

    ICMP type

    icmpv6_type

    Type: uinteger

    ICMP code

    icmpv6_code

    Type: string

    ICMP message

    icmpv6_str

    Type: uinteger

    IGMP type

    igmp_type

    Type: string

    IGMP type String

    igmp_type_str

    Type: uinteger

    precedence

    precedence

    Type: string

    precedence string

    precedence_str

    Type: uinteger

    tos

    tos

    Type: string

    tos string

    tos_str

    Type: uinteger

    dscp

    dscp

    Type: string

    dscp string

    dscp_str

    Type: uinteger

    min: 1 max: 48

    capture session

    capture_session

    Type: uinteger

    min: 1 max: 48

    capture session

    global_capture_session

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 39

    V Show Commandsshow vlan access-list

  • Log

    enable value: 1

    Log the packet

    disable value: 2

    Packet loging disabled

    log

    Fragments

    enable value: 1

    Match on fragments

    disable value: 2

    No fragment match

    fragments

    URG

    enable value: 1

    TCP urg flag set

    disable value: 2

    TCP urg flag clear

    urg

    ACK

    enable value: 1

    TCP ack flag set

    disable value: 2

    TCP ack flag clear

    ack

    PSH

    enable value: 1

    TCP psh flag set

    disable value: 2

    TCP psh flag clear

    psh

    RST

    enable value: 1

    TCP rst flag set

    disable value: 2

    TCP rst flag clear

    rst

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)40

    V Show Commandsshow vlan access-list

  • SYN

    enable value: 1

    TCP syn flag set

    disable value: 2

    TCP syn flag clear

    syn

    FIN

    enable value: 1

    TCP fin flag set

    disable value: 2

    TCP fin flag clear

    fin

    ESTABLISHED

    enable value: 1

    TCP established connection

    disable value: 2

    TCP not established connection

    established

    Type: uinteger

    IPv6 flow label

    flow_label

    Type: string

    Time-range

    timerange

    Type: hex

    MAC protocol number

    eth_proto

    Type: string

    MAC protocol name

    eth_proto_str

    Type: integer

    min: 0 max: 4095

    VLAN number

    vlan

    Type: integer

    min: 0 max: 7

    CoS value

    cos

    Type: longlong

    Number of packets matching the ACL

    match_count

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 41

    V Show Commandsshow vlan access-list

  • Type: string

    Remark String

    remark

    STATISTICS

    enable value: 1

    Statistics enabled for ACL

    disable value: 2

    Statistics not enabled for ACL

    statistics

    Type: string

    Source address group

    src_addrgrp

    Type: string

    Destination address group

    dest_addrgrp

    Type: string

    Source port group

    src_portgrp

    Type: string

    Destination port group

    dest_portgrp

    Source Port operator

    lt value: 4

    Match only packets with a lower packet length

    gt value: 5

    Match only packets with a greater packet length

    eq value: 6

    Match only packets on a given packet length

    neq value: 7

    Match only packets not on a given packet length

    range value: 8

    Match only packets in the range of packet lengths

    plen_op

    Type: uinteger

    Packet length minimum

    plen1

    Type: uinteger

    packet length maximum

    plen2

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)42

    V Show Commandsshow vlan access-list

  • Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 43

    V Show Commandsshow vlan access-list

  • show vlan access-mapshow vlan access-map [ name ] [__readonly__ [TABLE_vacl vacl_name [TABLE_seqno [ seqno ][ip_ipv6_mac match_name+ [ action_drop ] [ action_log ] [ action_fwd ] [ action_capture ] [action_redirectintf]] [ statistics ]]]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    List VLAN access mapsaccess-map

    Type: string

    length: 64

    List name

    name

    Type: string

    length: 64

    List name

    vacl_name

    __readonly__

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    TABLE_vacl

    TABLE_seqno

    Type: uinteger

    min: 1 max: 4294967295

    Sequence number

    seqno

    IP/iIPV6/MAC

    ip value: 9

    Display IP information

    mac value: 11

    MAC configuration commands

    ipv6 value: 10

    Display IPv6 information

    ip_ipv6_mac

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)44

    V Show Commandsshow vlan access-map

  • Type: string

    length: 64

    Access list name

    match_name

    DROP

    drop value: 1

    DROP action

    action_drop

    LOG

    log value: 1

    Log the packet

    action_log

    FWD

    forward value: 1

    FWD the packet

    action_fwd

    CAPTURE

    capture value: 1

    Capture the packet

    action_capture

    REDIRECT

    redirect value: 1

    Redirect the packet

    action_redirect

    Type: interface

    Interface traffic is redirected to

    intf

    STATISTICS

    enable value: 1

    Statistics enabled for Vlan access-list

    disable value: 2

    Statistics not enabled for vlan access-list

    statistics

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 45

    V Show Commandsshow vlan access-map

  • show vlan all-portsshow vlan all-ports [__readonly__ vlanshowbr-hdr TABLE_vlanbriefallports vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Show all ports on VLANall-ports

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefallports

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)46

    V Show Commandsshow vlan all-ports

  • Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 47

    V Show Commandsshow vlan all-ports

  • show vlan countersshow vlan counters [__readonly__ TABLE_vlancounters vlanshowbr-vlanid [ l2_ing_ucast_b ][ l2_ing_ucast_p ] [ l2_ing_mcast_b ] [ l2_ing_mcast_p ] [ l2_ing_bcast_b ] [ l2_ing_bcast_p ][ l2_egr_ucast_b ] [ l2_egr_ucast_p ] [ l3_ucast_rcv_b ] [ l3_ucast_rcv_p ]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    display counterscounters

    Read Only__readonly__

    vlan counters table formatTABLE_vlancounters

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: longlong

    L2 Ingress unicast octets

    l2_ing_ucast_b

    Type: longlong

    L2 Ingress unicast packets

    l2_ing_ucast_p

    Type: longlong

    L2 Ingress multicast octets

    l2_ing_mcast_b

    Type: longlong

    L2 Ingress multicast packets

    l2_ing_mcast_p

    Type: longlong

    L2 Ingress broadcast octets

    l2_ing_bcast_b

    Type: longlong

    L2 Ingress broadcast packets

    l2_ing_bcast_p

    Type: longlong

    L2 Egress unicast octets

    l2_egr_ucast_b

    Type: longlong

    L2 Egress unicast packets

    l2_egr_ucast_p

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)48

    V Show Commandsshow vlan counters

  • Type: longlong

    L3 unicast octets in

    l3_ucast_rcv_b

    Type: longlong

    L3 unicast packets in

    l3_ucast_rcv_p

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 49

    V Show Commandsshow vlan counters

  • show vlan dot1Q tag nativeshow vlan dot1Q tag native [__readonly__ tag_native_mode]

    Syntax Description Show running system informationshow

    VTP VLAN statusvlan

    Display dot1q parametersdot1Q

    Display tag parameterstag

    Display native vlan taggingnative

    Read Only__readonly__

    Native vlan tagging mode

    disabled value: 0

    Vlan dot1Q tag native is disabled

    enabled value: 1

    Vlan dot1Q tag native is enabled

    tag_native_mode

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)50

    V Show Commandsshow vlan dot1Q tag native

  • show vlan filtershow vlan filter [access-map name| vlan vlan] [__readonly__ TABLE_vlan_filter name configured_vlans]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    Information about VLAN filtersfilter

    Show the VLANs where an access-map is appliedaccess-map

    Type: string

    length: 64

    List name

    name

    Show the access-map applied to a VLANvlan

    Type: vlan

    VLAN number

    vlan

    __readonly__

    TABLE_vlan_filter

    Type: integer-mrange

    VLAN numbers

    configured_vlans

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 51

    V Show Commandsshow vlan filter

  • show vlan idshow vlan id vlan-id [__readonly__ vlanshowbr-hdr TABLE_vlanbriefid vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]vlanshowinfo-mtu-hdr TABLE_mtuinfoid vlanshowinfo-vlanid vlanshowinfo-media-typevlanshowinfo-vlanmode [ vlanshow-vlanerrbitmap ] [ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ][ vlanshowrspan-hdr2 ] [ vlanshowrspan-vlanbitmap ] [ pvlan-hdr ] [ pvlan-id-section ] [ pvlan-stby ][ is-vtp-manageable ] [ is-internal ] [ is-reserved ] [ is-rspan ] [ is-dynamic-gvrp ] show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefid

    MTU information table formatTABLE_mtuinfoid

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)52

    V Show Commandsshow vlan id

  • VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Vlan info mtu header

    vlanshowinfo-mtu-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-vlanid

    Select media type

    enet value: 1

    Vlan type Ethernet

    vlanshowinfo-media-type

    VLAN brief VLAN mode

    ce-vlan value: 0

    Classical Ethernet VLAN mode

    fabricpath-vlan value: 1

    Fabricpath VLAN mode

    vlanshowinfo-vlanmode

    Type: bitmap

    VLAN error bitmap

    vlanshow-vlanerrbitmap

    Type: uinteger

    RSPAN VLAN header for one VLAN

    vlanshowrspan-hdr1

    Type: uinteger

    RSPAN VLAN header for multiple VLANs

    vlanshowrspan-hdr2

    RSPAN VLAN one VLAN rspan or non-rspan

    rspan value: 2

    VLAN is RSPAN VLAN

    notrspan value: 1

    VLAN is not RSPAN VLAN

    vlanshowrspan-vlantype

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 53

    V Show Commandsshow vlan id

  • Type: bitmap

    RSPAN VLAN multiple VLANs

    vlanshowrspan-vlanbitmap

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Type: uinteger

    private vlan section

    pvlan-hdr

    Type: uinteger

    private id vlan section

    pvlan-id-section

    Type: uinteger

    private vlan section on standby

    pvlan-stby

    Type: bool

    VTP Manageable VLAN flag

    is-vtp-manageable

    Type: bool

    Internal VLAN flag

    is-internal

    Type: bool

    Reserved VLAN flag

    is-reserved

    Type: bool

    RSPAN VLAN flag

    is-rspan

    Type: bool

    Dynamic GVRP VLAN flag

    is-dynamic-gvrp

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)54

    V Show Commandsshow vlan id

  • show vlan id countersshow vlan id vlan-id counters [__readonly__ TABLE_vlancounters vlanshowbr-vlanid [ l2_ing_ucast_b ][ l2_ing_ucast_p ] [ l2_ing_mcast_b ] [ l2_ing_mcast_p ] [ l2_ing_bcast_b ] [ l2_ing_bcast_p ][ l2_egr_ucast_b ] [ l2_egr_ucast_p ]]

    Syntax Description Show running system informationshow

    Vlan commandsvlan

    VLAN status by VLAN idid

    display counterscounters

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Read Only__readonly__

    vlan counters table formatTABLE_vlancounters

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: longlong

    L2 Ingress unicast octets

    l2_ing_ucast_b

    Type: longlong

    L2 Ingress unicast packets

    l2_ing_ucast_p

    Type: longlong

    L2 Ingress multicast octets

    l2_ing_mcast_b

    Type: longlong

    L2 Ingress multicast packets

    l2_ing_mcast_p

    Type: longlong

    L2 Ingress broadcast octets

    l2_ing_bcast_b

    Type: longlong

    L2 Ingress broadcast packets

    l2_ing_bcast_p

    Type: longlong

    L2 Egress unicast octets

    l2_egr_ucast_b

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 55

    V Show Commandsshow vlan id counters

  • Type: longlong

    L2 Egress unicast packets

    l2_egr_ucast_p

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)56

    V Show Commandsshow vlan id counters

  • show vlan id vn-segmentshow vlan id vlan-id vn-segment [__readonly__ vlanshowinfo-segid-hdr TABLE_seginfoidvlanshowinfo-seg-vlanid vlanshowinfo-segment-id show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Show vn-segment mappingvn-segment

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Read Only__readonly__

    Segment id information table formatTABLE_seginfoid

    Type: uinteger

    Vlan info segment id header

    vlanshowinfo-segid-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-seg-vlanid

    Type: uinteger

    Vlan info SEGMENT ID

    vlanshowinfo-segment-id

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 57

    V Show Commandsshow vlan id vn-segment

  • show vlan mib private-vlan typeshow vlan [id vlan-id] mib private-vlan type [__readonly__ start vlan pvlan-type primary]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    Private VLAN type informationtype

    mibmib

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    vlan

    vlan

    normal value: 1

    normal

    primary value: 2

    Primary PVLAN

    isolated value: 3

    Isolated PVLAN

    community value: 4

    Community PVLAN

    pvlan-type

    Type: uinteger

    associated to primary

    primary

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)58

    V Show Commandsshow vlan mib private-vlan type

  • Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 59

    V Show Commandsshow vlan mib private-vlan type

  • show vlan nameshow vlan name vname [__readonly__ vlanshowbr-hdr TABLE_vlanbriefname vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]vlanshowinfo-mtu-hdr TABLE_mtuinfoname vlanshowinfo-vlanid vlanshowinfo-media-typevlanshowinfo-vlanmode [ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ] [ vlanshowrspan-hdr2 ][ vlanshowrspan-vlanbitmap ] show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN namename

    Type: string

    length: 128

    A VLAN name

    vname

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefname

    MTU information table formatTABLE_mtuinfoname

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)60

    V Show Commandsshow vlan name

  • VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Vlan info mtu header

    vlanshowinfo-mtu-hdr

    Type: uinteger

    Vlan info VLAN ID

    vlanshowinfo-vlanid

    Select media type

    enet value: 1

    Vlan type Ethernet

    vlanshowinfo-media-type

    VLAN brief VLAN mode

    ce-vlan value: 0

    Classical Ethernet VLAN mode

    fabricpath-vlan value: 1

    Fabricpath VLAN mode

    vlanshowinfo-vlanmode

    Type: uinteger

    RSPAN VLAN header for one VLAN

    vlanshowrspan-hdr1

    Type: uinteger

    RSPAN VLAN header for multiple VLANs

    vlanshowrspan-hdr2

    RSPAN VLAN one VLAN rspan or non-rspan

    rspan value: 2

    VLAN is RSPAN VLAN

    notrspan value: 1

    VLAN is not RSPAN VLAN

    vlanshowrspan-vlantype

    Type: bitmap

    RSPAN VLAN multiple VLANs

    vlanshowrspan-vlanbitmap

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 61

    V Show Commandsshow vlan name

  • Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)62

    V Show Commandsshow vlan name

  • show vlan private-vlanshow vlan [id vlan-id] private-vlan [__readonly__ start primary secondary pvlan-type ports]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    Primary VLAN

    primary

    Type: uinteger

    Secondary VLAN

    secondary

    isolated value: 1

    Isolated PVLAN

    community value: 2

    Community PVLAN

    primary value: 3

    Primary PVLAN

    non-operational value: 4

    Non-operational PVLAN

    pvlan-type

    Type: uinteger

    Port list

    ports

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 63

    V Show Commandsshow vlan private-vlan

  • show vlan private-vlan interface hostshow vlan private-vlan interface [ if ] host [next data] [__readonly__ start interface-id secondary-vlan]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    private-vlan hosthost

    next-entrynext

    Type: uinteger

    ignore junk value

    data

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    Type: uinteger

    Secondary Vlan

    secondary-vlan

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)64

    V Show Commandsshow vlan private-vlan interface host

  • show vlan private-vlan interface mappingshow vlan private-vlan interface [ if ]mapping [__readonly__ start interface-idmulti-primary secondary-vlantwo-way]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    private-vlan mappingmapping

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    Type: bool

    multiple primay capable

    multi-primary

    Type: bitmap

    seconadry vlans bitmap

    secondary-vlan

    Type: bool

    multiple primay capable

    two-way

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 65

    V Show Commandsshow vlan private-vlan interface mapping

  • show vlan private-vlan interface modeshow vlan private-vlan interface [ if ] mode [next data] [__readonly__ start interface-id port-mode]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    private-vlan port modemode

    next-entrynext

    Type: uinteger

    ignore junk value

    data

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    not-private-vlan value: 1

    private-vlan-host value: 2

    private-vlan-promiscuous value: 3

    private-vlan-trunk value: 4

    port-mode

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)66

    V Show Commandsshow vlan private-vlan interface mode

  • show vlan private-vlan interface trunkshow vlan private-vlan interface [ if ] trunk [__readonly__ start interface-id dynamic-state encap-typenative-vlan secondary-vlans normal-vlans dynamic-status encap-oper-type]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Private VLAN informationprivate-vlan

    Show interface status and informationinterface

    Type: interface-mrange

    Interface id

    if

    pvlan trunktrunk

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: interface

    Interface

    interface-id

    Type: uinteger

    dynamic state

    dynamic-state

    Type: uinteger

    encapsulation type

    encap-type

    Type: uinteger

    native vlan

    native-vlan

    Type: bitmap

    secondary vlans

    secondary-vlans

    Type: bitmap

    normal vlans

    normal-vlans

    Type: uinteger

    dynamic status

    dynamic-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 67

    V Show Commandsshow vlan private-vlan interface trunk

  • Type: uinteger

    encap oper type

    encap-oper-type

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)68

    V Show Commandsshow vlan private-vlan interface trunk

  • show vlan private-vlan mappingshow vlan [id vlan-id] private-vlan mapping [next data] [__readonly__ start vlan-id primary]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    private-vlan mappingmapping

    next-entrynext

    Type: uinteger

    ignore junk value

    data

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    secondary

    vlan-id

    Type: uinteger

    primary-vlan

    primary

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 69

    V Show Commandsshow vlan private-vlan mapping

  • show vlan private-vlan typeshow vlan [id vlan-id] private-vlan type [__readonly__ start vlan pvlan-type primary]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN status by VLAN idid

    Type: vlan-mrange

    VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

    vlan-id

    Private VLAN informationprivate-vlan

    Private VLAN type informationtype

    Read Only__readonly__

    Type: uinteger

    Start

    start

    Type: uinteger

    vlan

    vlan

    isolated value: 1

    Isolated PVLAN

    community value: 2

    Community PVLAN

    primary value: 3

    Primary PVLAN

    non-operational value: 4

    Non-operational PVLAN

    normal value: 5

    normal

    pvlan-type

    Type: uinteger

    associated to primary

    primary

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)70

    V Show Commandsshow vlan private-vlan type

  • Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 71

    V Show Commandsshow vlan private-vlan type

  • show vlan reservedshow vlan reserved [__readonly__ TABLE_reserved ivusage-vlanid ivusage-desc show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    Internal reserved VLANsreserved

    Read Only__readonly__

    Internal reserved VLAN table formatTABLE_reserved

    Type: uinteger

    internal vlan usage VLAN id

    ivusage-vlanid

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)72

    V Show Commandsshow vlan reserved

  • Multicast VLAN start value: 1

    Multicast VLAN start

    Multicast VLAN end value: 2

    Multicast VLAN end

    Online diagnostics vlan1 value: 3

    online diagnostics vlan1

    Online diagnostics vlan2 value: 4

    online diagnostics vlan2

    Online diagnostics vlan3 value: 5

    online diagnostics vlan3

    Online diagnostics vlan4 value: 6

    online diagnostics vlan4

    Unused reserved VLAN lower start value: 7

    Unused VLAN lower start

    Unused reserved VLAN lower end value: 8

    Unused VLAN lower end

    Satellite VLAN value: 9

    Satellite VLAN

    Unused reserved VLAN upper start value: 10

    Unused VLAN upper start

    Unused reserved VLAN upper end value: 11

    Unused VLAN upper end

    Reserved value: 12

    Reserved

    ivusage-desc

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 73

    V Show Commandsshow vlan reserved

  • show vlan xbriefshow vlan xbrief [__readonly__ vlanshowbr-hdr TABLE_vlanbriefxbrief vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    All VLAN status in briefxbrief

    Read Only__readonly__

    VLAN brief table formatTABLE_vlanbriefxbrief

    Type: uinteger

    VLAN brief header

    vlanshowbr-hdr

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid

    Type: uinteger

    VLAN brief VLAN ID

    vlanshowbr-vlanid-utf

    Type: string

    VLAN brief VLAN name

    vlanshowbr-vlanname

    VLAN brief VLAN state

    active value: 1

    VLAN Active State

    suspend value: 2

    VLAN Suspended State

    vlanshowbr-vlanstate

    VLAN brief shutdown state

    shutdown value: 1

    VLAN shut state

    noshutdown value: 2

    VLAN no shut state

    vlanshowbr-shutstate

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)74

    V Show Commandsshow vlan xbrief

  • Type: interface-mrange

    Port list ifindex

    vlanshowplist-ifidx

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 75

    V Show Commandsshow vlan xbrief

  • show vlan xsummaryshow vlan xsummary [__readonly__ vlansum-vtp-vlan vlansum-ext-vlan vlansum-all-vlanvlansum-max-supported-vlan show-end [ true-end ]]

    Syntax Description Show running system informationshow

    VLAN statusvlan

    VLAN summary informationxsummary

    Read Only__readonly__

    Type: uinteger

    Show vlan summary Number of normal vlans

    vlansum-vtp-vlan

    Type: uinteger

    Show vlan summary Number of extended vlans

    vlansum-ext-vlan

    Type: uinteger

    Show vlan summary Total

    vlansum-all-vlan

    Type: uinteger

    Show vlan summary Max supported vlans

    vlansum-max-supported-vlan

    Type: uinteger

    Show vlan end marker

    show-end

    Type: uinteger

    Show vlan end marker

    true-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)76

    V Show Commandsshow vlan xsummary

  • show vpc (mcecm)show vpc {vpc-number| brief vpc vpc-number} [__readonly__ [ vpc-hdr ] [ vpc-is-es ] [ vpc-not-es ][TABLE_vpc vpc-id vpc-ifindex vpc-port-state vpc-thru-peerlink vpc-consistency [ vpc-consistency-reason ][ vpc-consistency-status ] up-vlan-bitset es-attr] vpc-end]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Brief display of vPC statusbrief

    Type: integer

    min: 1 max: 4096

    Enter a Virtual Port Channel number

    vpc-number

    Read Only__readonly__

    Type: string

    Start of vPC table

    vpc-hdr

    Type: string

    Flag to indicate vPC+ complex

    vpc-is-es

    Type: string

    Flag to indicate vPC complex

    vpc-not-es

    vPC tableTABLE_vpc

    Type: uinteger

    vPC id

    vpc-id

    Type: string

    vPC ifindex

    vpc-ifindex

    Type: integer

    vPC port state

    vpc-port-state

    Type: integer

    vPC Routing through peerlink

    vpc-thru-peerlink

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 77

    V Show Commandsshow vpc (mcecm)

  • vPC global configuration consistency

    consistent value: 1

    vPC global configuration consistent

    inconsistent value: 2

    vPC global configuration inconsistent

    not-applicable value: 3

    vPC configuration not applicable

    vpc-consistency

    Type: string

    vPC consistency reason

    vpc-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)78

    V Show Commandsshow vpc (mcecm)

  • vpc-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 79

    V Show Commandsshow vpc (mcecm)

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)80

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    Type: string

    vPC UP VLAN bitset

    up-vlan-bitset

    Type: string

    vPC+ attributes

    es-attr

    Type: string

    End of table

    vpc-end

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 81

    V Show Commandsshow vpc (mcecm)

  • show vpc (mcecm)show vpc [brief] [__readonly__ vpc-domain-id [ vpc-l2mp-switch-id ] vpc-peer-status vpc-peer-status-reasonvpc-peer-keepalive-status [ vpc-peer-l2mp-status ] vpc-peer-consistency [ vpc-peer-consistency-reason ][ vpc-per-vlan-peer-consistency ] vpc-peer-consistency-status vpc-type-2-consistency[ vpc-type-2-consistency-reason ] vpc-type-2-consistency-status vpc-role num-of-vpcs [ track-obj ][ peer-gateway ] [ peer-gateway-excluded-vlans ] dual-active-excluded-vlansvpc-graceful-consistency-check-status [ vpc-auto-recovery-status ] [ vpc-scale-high-status ][ fp-enhanced-load-balancing ] [ vpc-per-vlan-peer-consistency ] vpc-peer-link-hdr [TABLE_peerlinkpeer-link-id peerlink-ifindex peer-link-port-state peer-up-vlan-bitset] vpc-end vpc-hdr [ vpc-is-es ] [ vpc-not-es ][TABLE_vpc vpc-id vpc-ifindex vpc-port-state vpc-thru-peerlink vpc-consistency [ vpc-consistency-reason ][ vpc-consistency-status ] up-vlan-bitset es-attr] vpc-end]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Brief display of vPC statusbrief

    Read Only__readonly__

    vPC peerlink tableTABLE_peerlink

    vPC tableTABLE_vpc

    Type: string

    vPC domain id

    vpc-domain-id

    Type: uinteger

    vPC+ switch ID

    vpc-l2mp-switch-id

    vPC peer status

    peer-not-configured value: 1

    vPC peer-link not configured

    peer-not-found value: 2

    vPC peer not found

    peer-ok value: 3

    vPC peer adjacency ok

    peer-link-down value: 4

    vPC peer link down

    vpc-peer-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)82

    V Show Commandsshow vpc (mcecm)

  • vPC peer status reason

    SUCCESS value: 0x00000000

    SUCCESS

    SYSERR_MCECM_PEER_UNRCH value: 0x41B70034

    SYSERR_MCECM_PEER_UNRCH

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_ELECTION_ERROR value: 0x41B70037

    SYSERR_MCECM_ELECTION_ERROR

    SYSERR_MCECM_OOB_NOT_OPERATIONAL value: 0x41B7004D

    SYSERR_MCECM_OOB_NOT_OPERATIONAL

    vpc-peer-status-reason

    vpc peer keepalive status

    disabled value: 1

    vpc peer keepalive disabled

    peer-alive value: 2

    vpc peer keepalive received

    peer-not-alive value: 3

    vpc peer keepalive not received

    peer-alive-domain-mismatch value: 4

    vpc peer keepalive received,domainID mismatch

    suspended value: 5

    vpc peer keepalive suspended for ISSU

    not-operational value: 6

    vpc peer keepalive not operational

    suspended-vrf value: 7

    vpc peer keepalive suspended: invalid vrf

    misconfigured value: 8

    vpc peer keepalive misconfigured

    vpc-peer-keepalive-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 83

    V Show Commandsshow vpc (mcecm)

  • vPC fabricpath status

    unknown value: 0

    vpc fabricpath peer is unknown

    alive value: 1

    vpc peer is reachable through fabricpath network

    dead value: 2

    vpc peer is unreachable through fabricpath network

    vpc-peer-l2mp-status

    vPC role

    none-established value: 0

    no role established

    primary value: 2

    vPC primary primary

    primary-secondary value: 1

    vPC primary secondary

    secondary-primary value: 3

    vPC secondary primary

    secondary value: 4

    vPC secondary secondary

    vpc-role

    Type: integer

    Peer gateway status

    peer-gateway

    Type: string

    peer-gateway excluded VLANs

    peer-gateway-excluded-vlans

    Type: string

    dual-active excluded VLANs

    dual-active-excluded-vlans

    Type: integer

    Fabricpath enhanced load balancing status

    fp-enhanced-load-balancing

    Type: string

    Number of vPCs configured

    num-of-vpcs

    Type: string

    Track object for vPC

    track-obj

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)84

    V Show Commandsshow vpc (mcecm)

  • vPC graceful consistency check

    enabled value: 1

    vPC graceful consistency check enabled

    disabled-user value: 2

    vPC graceful check user disabled

    disabled-peer value: 3

    vPC graceful check peer disabled

    vpc-graceful-consistency-check-status

    vPC global configuration consistency

    consistent value: 1

    vPC global configuration consistent

    inconsistent value: 2

    vPC global configuration inconsistent

    not-applicable value: 3

    vPC configuration not applicable

    vpc-consistency

    Type: string

    vPC consistency reason

    vpc-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 85

    V Show Commandsshow vpc (mcecm)

  • vpc-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)86

    V Show Commandsshow vpc (mcecm)

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 87

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    vPC global configuration consistency

    consistent value: 1

    vPC global configuration consistent

    inconsistent value: 2

    vPC global configuration inconsistent

    not-applicable value: 3

    vPC configuration not applicable

    vpc-peer-consistency

    Type: string

    vPC consistency reason

    vpc-peer-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)88

    V Show Commandsshow vpc (mcecm)

  • vpc-peer-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 89

    V Show Commandsshow vpc (mcecm)

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)90

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    vPC per-vlan global configuration consistency

    consistent value: 1

    vPC per-vlan global configuration consistent

    inconsistent value: 2

    vPC per-vlan global configuration inconsistent

    vpc-per-vlan-peer-consistency

    vPC type-2 configuration consistency status

    consistent value: 1

    vPC type-2 compat check succeeded

    inconsistent value: 2

    vPC type-2 compat check failed

    vpc-type-2-consistency

    Type: string

    vPC type-2 configuration consistency reason

    vpc-type-2-consistency-reason

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 91

    V Show Commandsshow vpc (mcecm)

  • vpc-type-2-consistency-status

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)92

    V Show Commandsshow vpc (mcecm)

  • vPC type-2 configuration consistency status

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 93

    V Show Commandsshow vpc (mcecm)

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    vPC scale high status

    enabled value: 1

    vPC scale high status enabled

    disabled-user value: 2

    vPC scale high status user disabled

    disabled-peer value: 3

    vPC scale high status peer disabled

    vpc-scale-high-status

    Type: string

    Start of vPC table

    vpc-hdr

    Type: string

    Flag to indicate vPC+ complex

    vpc-is-es

    Type: string

    Flag to indicate vPC complex

    vpc-not-es

    Type: string

    Start of vPC peer-link table

    vpc-peer-link-hdr

    Type: integer

    vPC Routing through peerlink

    vpc-thru-peerlink

    Type: integer

    vPC port state

    vpc-port-state

    Type: string

    End of table

    vpc-end

    Type: uinteger

    vPC id

    vpc-id

    Type: string

    vPC ifindex

    vpc-ifindex

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)94

    V Show Commandsshow vpc (mcecm)

  • Type: uinteger

    peer link id

    peer-link-id

    Type: string

    peer link ifindex

    peerlink-ifindex

    Type: integer

    peer-link port state

    peer-link-port-state

    Type: string

    peer link UP VLAN bitset

    peer-up-vlan-bitset

    Type: string

    vPC UP VLAN bitset

    up-vlan-bitset

    Type: string

    vPC+ attributes

    es-attr

    Type: string

    Auto-recovery status

    vpc-auto-recovery-status

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 95

    V Show Commandsshow vpc (mcecm)

  • show vpc consistency-parametersshow vpc consistency-parameters {global| interface if| vpc vpc-num} [__readonly__TABLE_vpc_consistency vpc-param-name vpc-param-type vpc-param-local-val vpc-param-peer-val]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Show vPC Consistency Parametersconsistency-parameters

    Global Parametersglobal

    Specify interfaceinterface

    Type: integer

    min: 1 max: 4096

    Enter a Virtual Port Channel number

    vpc-num

    Read Only__readonly__

    vPC tableTABLE_vpc_consistency

    Type: stringvpc-param-name

    Type: stringvpc-param-type

    Type: stringvpc-param-local-val

    Type: stringvpc-param-peer-val

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)96

    V Show Commandsshow vpc consistency-parameters

  • show vpc consistency-parameters vlansshow vpc consistency-parameters vlans [__readonly__ TABLE_vpc_consistency vpc-param-namevpc-param-type [ reason_code ] [ syserr ] vpc-pass-vlans [ reason_code ]]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Show vPC Consistency Parametersconsistency-parameters

    vlansvlans

    Read Only__readonly__

    vPC tableTABLE_vpc_consistency

    Type: stringvpc-param-name

    Type: stringvpc-param-type

    Type: stringvpc-pass-vlans

    Type: string

    vPC consistency reason

    syserr

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 97

    V Show Commandsshow vpc consistency-parameters vlans

  • reason_code

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)98

    V Show Commandsshow vpc consistency-parameters vlans

  • vPC consistency reason

    SUCCESS value: 0x00000000

    SUCCESS

    INVALID value: 0x00000001

    INVALID

    SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F

    SYSERR_MCECM_COMPAT_FAILED

    SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025

    SYSERR_MCECM_PEER_NOT_CFG

    SYSERR_MCECM_MCT_DOWN value: 0x41B7002A

    SYSERR_MCECM_MCT_DOWN

    SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035

    SYSERR_MCECM_MCT_NOT_UP

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A

    SYSERR_MCECM_MCT_DOES_NOT_EXISTS

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B

    SYSERR_MCECM_MCEC_DOES_NOT_EXISTS

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042

    SYSERR_MCECM_COMPAT_CHK_NOT_DONE

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F

    SYSERR_MCECM_DOMAIN_COMPAT_FAILED

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044

    SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027

    SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029

    SYSERR_PCM_MCEC_LAG_ID_MISMATCH

    SYSERR_PCM_INVALID value: 0x402B0004

    SYSERR_PCM_INVALID

    SYSERR_PCM_INTERNAL value: 0x402B0003

    SYSERR_PCM_INTERNAL

    SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A

    SYSERR_STP_COMPAT_CHECK_FAILURE

    SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 99

    V Show Commandsshow vpc consistency-parameters vlans

  • SYSERR_SVI_COMPAT_CHECK_FAILURE

    SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050

    SYSERR_MCECM_TYPE_CHECK_BYPASSED

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062

    SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)100

    V Show Commandsshow vpc consistency-parameters vlans

  • show vpc orphan-portsshow vpc orphan-ports [__readonly__ TABLE_orphan_ports vpc-vlan vpc-orphan-ports]

    Syntax Description Show running system informationshow

    Virtual Port Channel configurationvpc

    Show ports that are not part of vPC but have common VLANsorphan-ports

    Read Only__readonly__

    vPC orphan ports tableTABLE_orphan_ports

    Type: stringvpc-vlan

    Type: stringvpc-orphan-ports

    Command Modes• /exec

    Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 101

    V Show Commandsshow vpc orphan-ports

  • show vpc peer-keepaliveshow vpc peer-keepalive [__readonly__ vpc-peer-keepalive-status vpc-keepalive-destvpc-keepalive-send-interface vpc-keepalive-receive-interface vpc-keepalive-send-tstampvpc-keepalive-receive-tstamp vpc-peer-keepalive-up-time vpc-keepalive-send-status v