using osm, qgis, and inasafe for contingency plan in indonesia

29
USING OSM, QGIS AND INASAFE FOR CONTINGENCY PLAN Ateneo de Manila University, December 14th, 2013 Dewi Sulistioningrum [email protected] om

Upload: esambale

Post on 01-Nov-2014

1.352 views

Category:

Technology


1 download

DESCRIPTION

Presented by Dewi Sulistioningrum - OSM-ID during the State of the Map Philippines 2013.

TRANSCRIPT

Page 1: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

USING OSM, QGIS AND INASAFE

FOR CONTINGENCY

PLAN Ateneo de Manila University, December 14th, 2013

Dewi [email protected]

Page 2: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

INTRODUCTION TO CONTINGENCY PLAN

Page 3: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

What is Contingency Plan ??

Contingency is a condition that is expected to happen, but it probably will not happen.

Contingency PlanA process of identification and planning that is based on contingency. A contingency plan may not always been turned on, if the situation is not expected to occur.

Page 4: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Prevention and

Mitigation

Preparedness

(Contingency Plan)

Emergency Response

Rehabilitation and

Reconstruction

Disaster Incident

DISASTER MANAGEMENT CYCLE

Page 5: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

How to Utilize Open Source Technology for Contingency Plan

Spatial Data

Mapping

Data Collection1. Digitized Imagery2. Global Positioning System (GPS)3. Walking/Field Papers

OpenStreetMap

QuantumGIS

InaSAFE

Tools used to collect exposure data

Tools used to process and analysis spatial data

Additional tools in QGIS used to calculate the impact

Page 6: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

HOW TO DEVELOP SCENARIO FOR CONTINGENCY PLAN

Impact

Hazard Exposure

Page 7: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

BENGAWAN SOLOCONTINGENCY PLAN

Page 8: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Step By StepPreparation• Scouts Training• Preparing Survey Form• Preparing Preset FileData Collection• Field Survey• Digitizing + Input Attribute DataAnalysis • InaSAFE Modelling

Page 9: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Scouts Training• 3 Days training• 40 Participants• Beginner & Intermediate Training alumni and

some BPBD staff was involved, either as trainer / co – trainer

Page 10: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Preparing Survey Form & Preset File

Page 11: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Survey

Data Collection

Ngawi

Bojonegoro

Tuban

Lamongan

Gresik

Fieldpapers + Talking with the

Headman

GPS :@ District 2 – 3 GPS

Residential

Road & Bridge

Health Service

POI (Affected)

POI (Not Affected)

Digitizing (Continue) +

Validation

Input Attribute Data

@ 10 Scouts

@ District : 6 – 10 villages

5 Days survey

Priority :most

affected villages

Digitizing imagery + Validation

Disable people

Pregnant Woman

Page 12: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Digitizing + Input Attribute Data

Page 13: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Mapping Results

• + 35.000’s buildings have been mapped• Not all buildings have complete attribute data

Page 14: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

InaSAFE Result 1 : Map of Buildings Might Be Flooded

Page 15: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

InaSAFE Result 2 : Statistics of Buildings Might Be Flooded

Page 16: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

PEOPLE AFFECTED MAP

Result... (4) InaSAFE Simulation

Page 17: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

InaSAFE Result 3 : Statistics of People Might be affected, and need to be evacuated

Page 18: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia
Page 19: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

DKI JAKARTA CONTINGENCY PLAN

Page 20: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

ACTIVITIES

Provide data and flood affected maps to support Jakarta Flood Contingency Plan

Provide InaSAFE simulation results Help UNICEF to prepare Jakarta Flood Contingency Plan for Education Sector

Page 21: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Open link webGIS DKI Jakarta Contingency Plan http://openstreetmap.or.id/renkonbanjirdki/

Page 22: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

MAKASSAR MAPPING TO SUPPORT FLOOD CONTINGENCY PLAN

Page 23: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia
Page 24: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia
Page 25: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

SCENARIO (BUILDINGS AFFECTED)

Hazard Data =

Banjir_Update.shp

Exposure Data =

bangunan.shp

Page 26: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

BUILDINGS AFFECTED

Page 27: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia
Page 28: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

Lesson Learned• Hazard map must be ready since the beginning • Fieldpaper making must involve local people or its

representatives

• Make a clear index map for all of the fieldpapers• Daily monitoring during field survey must be done

strictly• Focus/priority to collect important building data

(such as school, public health service, government office, place of worship)

• Involving volunteer (not official BPBD staff) is a good choice for collecting data ➔ scouts, university students

• Everything must be legal & is supported by all stakeholders ➔ mainly related to data availability

Page 29: Using OSM, QGIS, and InaSAFE for Contingency Plan in Indonesia

THANK YOU

OSM-ID