user/installation manual of led-illuminated mirror with ... woodenfram… · on the wall are the...
TRANSCRIPT
1
User/installation manual of LED-illuminatedmirror with Wodden Frame
2
Thank you that you decided to buy our product. We made all our products taking care of each detail and we subject them to multiple tests. We are convinced that you made a purchase that will serve you for a long time.
Read the manual carefully before proceeding to assembly.
NECCESSARY TOOLS
A encil.
A measuring tape or a ruler.
A level.
You may also need help of another person.
A drill bit of 10 mm.
A drill and a screwdriver.
A wall plug of 10 mm (included).
Bolts L-hooks (included).
SAFETY
3
Warning glass! Place the mirror only on a soft surface. The corners are particu-larly susceptible to mechanical damage.
Do not hang the frame on movable interior fittings.Do not hang the frame on a wall made of plasterboard.Do not stick the frame to the wall with mounting tape
Warning crumble!
Warning!
The mirror with frame weights approximately 20 - 30 kg.
PREPARATIO FOR INSTALLATION
4
Do not place the mirror on a hard surface, since it can cause a damage to the product.
Content:
1.
2.
3.
4.5.
Open the packing first. Remember not to place the mirror on a hard surface, since it can cause a damage to the product.Then, take out the mirror from the packing and put it on a soft surface (you can use e.g. a folded towel for this purpose).Check whether the packing contains all components, according to the list at the bottom of the page.Remove the protective foil, but remember not to use metal tools. Make sure that the product does not bear any traces of scratches or damage.
1. WoodenFrame Mirror 2. A wall plug of 10 mm - 2 pcs 3. Bolts L-hooks – 2 pcs
Correct Wrong
INSTRUCTION FOR MOUNTING ON THE WALL
1. In order to determine the mounting place on the wall, measure the distance between two holes for hooks mounted on the mirror
2. Using the measurements, mark two points on the wall that will serve you to drill holes
5
6
INSTRUCTION FOR MOUNTING ON THE WALL
3. Make sure that the distances between the hook holes and between points marked on the wall are the same
9. In order to ensure that the mirror is fixed stably, check whether L-hooks are mounted correctly in hole hooks
4.
5.
6.
Check whether there are no pipes or electric wires in the places where the holes will be made.
If there are pipes or electric wires in the wall, choose another place to mount the mirror.
Once you determine mounting places on the wall, drill holes there.
7.8.
Put wall plugs in the holes.Then screw “L-hooks” in the wall plugs situated about 5-10 mm from the wall.
7
INSTRUCTION FOR MOUNTING ON THE WALL
10. Then, suspend the mirror on L-hooks.
8
INSTRUCTION FOR CLEANINGAND MAINTENANCE
In order to remove the residues of the protective film from the surface of the mirror, use a solvent, acetone or nail polish remover
For daily maintenance of the mirror, use only agents for cleaning of glass surfaces and a dry microfibre cloth
Avoid cleaning of the glass with silicone or acid-based agents. Cleaning agents of this kind may damage the surface of the mirror and cause its corrosion in the future.
FORAMA Sp. z o.o. sp. k.Karpicko, ul. Podgórna 16, 64-200 Wolsztyn
NIP 923-172-93-78, REGON 381749814Mail EU: [email protected]; Mail PL: [email protected]
+48 68 422 73 65
We work from Monday to Friday from: 9: 00 AM to 3. 00 PM