IP Gateway - Part# C156.305

USE

R M

ANU

AL

INSTRUCTION PROGRAMMINGIPG - IP Gateway

IP B

IP A

5VDCInput*

I/O Network

*Required only when not connected to a powered I/O network

BACK VIEW

NDC Connection

Device

Network

NDC Connection Switch

Section 1 - Overview

INSTRUCTION PROGRAMMINGIPG - IP Gateway

Section 2 - I/O Network Wiring

Section 3 - IP Network Wiring

IP Gateways can be wired as a standalone network or as part of a building network. Please Note: Maximum wiring distance between IPGs and/or CNC is 328’ (100M).

Network Into Shade Network

NDC

IP GATEWAY

I/O Network WiringNetwork Mode I/O

Network

NDC Connection

Device

Network

Device In

NDC

IP GATEWAY

I/O Network WiringDevice Mode

I/O Network

to Shade Network

NDC Connection

Device

Network

Network In

IP A

to Shade Network

IP Wiring Building Network

NDC

IP GATEWAY

I/O Network

to BuildingNetwork

Network In

Network InNDC

to Shade Network

Network In

I/O Network

NDCto Shade Network

I/O Network

NDC

IP B

IP A

IP A IP A

to I/O Network

IP GATEWAY IP GATEWAYIP GATEWAY

IP WiringStandalone

I/O Network

INSTRUCTION PROGRAMMINGIPG - IP Gateway

Section 3 - Screen Navigation

DEVICE LIST Device List is used to verify the devices on the connected I/O network. The quantity of each type of device is shown.

This section allows for the configuration of a static IP address for the IP gateway.

CONFIGURATION IP Mode DHCP (Static)

IP Address 192.168.1.90 (Read Only if DHCP)

Subnet Mask 255.255.255.0 (Read Only if DHCP)

Default Gateway 192.168.1.1 (Read Only if DHCP)

MAC Address AABBCCDDEEFF (read only)

This function resets the IP Gateway configuration to the default settings.

CONFIGURATION Factory Reset Do you want to restore factory settings? YES

NO

Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999

© 2021 All Rights Reserved | FORM: C156.305_IPG_IO_Inst21