user manua l - cps-telecom.com · roger tone setting, for transmitting end tones. ... ptt鍵 機...
TRANSCRIPT
-
SMARTBWALKIE TALKIE
USER MANUA
CP228 BUSINESS
WALKIE TALKIE USER MANUAL
-
1.1Introduction
The CP228 SMART Business Walkie Talkie combines quality and versatility Into a compact,
light and portable two-way radio with state-of-the-art design and easy-to-use features.
1.2Key Features
53CTCSS and 104 DCS
Volume setting (116)
S.Q. Level control with 5 steps
Voice Operated Transmission ( VOX )
Dual Watch ( DW )
Key Lock
Battery Saving
0.5Watt High Power Speaker Output
3.7V 1100mAh Li-Polymer Battery pack
Channel ScanScans for acvity across different communicaons channels
Monitor funconEnables monitoring for weak radio signals
Busy Channel LockoutPrevents the radio from listening to or transmitting over its channels
RSSIReceiving signal strength indicaon
Battery Level Indicator
Beep sound Setting for using key Tones.
Power Output setting H:L
Roger Tone Setting, for transmitting end Tones.
Standby indicator setting
Intelligent ear-microphone adjustment
Reset setting
1.3Accessories
CB28 Li-Polymer Battery pack
CWC18 (S) Charging adapter including Micro-USB cable
Owners manual
1.4Optional Accessories
External speaker / microphone
CS28 Rapid Charger (4 Slots)
1. GENERAL INFORMATION
EN
GL
ISH
-
2. CONTROLS AND INDICATORS
External Speaker /Mic.Cap
PTT Key
Function key
Belt Clip
Battery pack
Power Switch
Down Key
LCD Display
Up Key
Menu Key
Microphone
Loud Speaker
Charging Contact
USB jack
Down Key
LCD Display
Up Key
Menu Key
Microphone
Loud Speaker
EN
GL
ISH
-
2. CONTROLS AND INDICATORS
RF Power ( H/L ) Beep Sound
Scan lock
Monitor
Vox
Battery condition
Channel number CTCSS/DCS number
CTCSS DCS BCLO
Power Saving
Dual Watch
RSSI
EN
GL
ISH
-
3.1Charging
1. Connect the USB cable to the USB jack of the unit and the
other end of the USB cable to the
2. Plug the AC adaptor into a standard electrical outlet
3. It will take 3 - 3.5 hours for full charging
Or
1. Connect the USB cable to the USB jack of the unit and the
other end of the USB cable to the USB
2. It will take 3 - 3.5 hours for full charging
Or
1. Plug the AC adaptor into a standard electrical outlet
2. Insert the Walkie Talkie into the charging tray for
charging. It will take 2 2.5 hours for full charging
3.2Charging Status
1. Charging Using USB, charging completed will display "FULL" symbol.
2. Using Rapid charger will show green light.
4.1Menu Setting
Press and hold the key longer than 2 sec. to enter Menu mode, press
desired menu and press
If no operation, 10 seconds will automatically exit the menu setting.
3. CHARGING THE BATTERY
4. MENU SETTING
VOL SET STEP 1-16
CH SET TONE SET
DW SET BEEP SET
BLIGHT SETROG SET
CH 1-20 CTCSS / DCS EDIT
OFF / CH OFF / ON
OFF / 1-3 OFF / ON
Connect the USB cable to the USB jack of the unit and the
f the USB cable to the AC adaptor.
Plug the AC adaptor into a standard electrical outlet.
3.5 hours for full charging
Connect the USB cable to the USB jack of the unit and the
other end of the USB cable to the USB port of computer .
3.5 hours for full charging
standard electrical outlet
Insert the Walkie Talkie into the charging tray for
2.5 hours for full charging
harging Using USB, charging completed will display "FULL" symbol.
Using Rapid charger will show green light.
key longer than 2 sec. to enter Menu mode, press
key to select the function then press
If no operation, 10 seconds will automatically exit the menu setting.
SQL SET VOX SET
POWER SET BCLO SET
BLIGHT SET
SQL 1-5 OFF / LOW / HI
RESET SET
OFF / 1-2 OFF / ON
HI / LOW OFF / ON
key to choose
key to save it.
EN
GL
ISH
-
Press and hold the
Press and hold the
the number of Channel.
Press key and the screen will display CTC off , press
desired CTCSS/DCS ( CTCSS 1
Press key to complete this setting or to press
functions , press
key at any time to complete this setting.
SL001 ...............................
Uo off ...............................
dc off ................................
bP on ...............................
bc on ................................
Po Hi ........................................
Rgoff ................................
bL on ................................
rS off ................................
Press key at the side and
after Lock, the unit can only be allowed to adjust volume or transmit and receive.
6.1 Power On / Off
To turn the radio on or off, press and hold the power on
6.2 Volume
Adjust the volume level by using
6.3 Transmission
Press and hold the key while speaking at about 5cm from the microphone
transmission. Release the
6.4 Reception
Listen for activity on the selected channel.
6.5 Monitor
Press key and key simultaneously to select MONITOR ON / OFF.
6.6 Scan
Press key and key simultaneously to select SCAN ON / OFF
6.7 Key Lock
Press key and key simultaneously to select Key Lock ON / OFF
5. CHANNEL SETTING BRIEF NOTE
6. OPERATION
Power out
VOX
Dual
Beep Sound Back
Reset
Busy
Roger
Squelch Level
EN
GL
ISH
key on the top of the unit.
key until the letter CH is blinking, press
key and the screen will display CTC off , press key to select your
CTCSS/DCS ( CTCSS 1 53, DCS 1 104 )
to complete this setting or to press key again to have the
key to select Yes or No of the functions, you may
at any time to complete this setting.
at the side and key at the same time to LOCK /UNLOCK the unit,
Lock, the unit can only be allowed to adjust volume or transmit and receive.
To turn the radio on or off, press and hold the power on key .
key (16 steps, default 8)
key while speaking at about 5cm from the microphone
key to return to standby mode.
Listen for activity on the selected channel.
key simultaneously to select MONITOR ON / OFF.
key simultaneously to select SCAN ON / OFF
key simultaneously to select Key Lock ON / OFF
CHANNEL SETTING BRIEF NOTE
Power out
VOX Voice Activated Transmission
Dual Watch
Beep Sound Back light blinking
Reset
Busy Channel Lock Out
Roger Beep Tone
Squelch Level
key to select
key to select your
again to have the other
key to select Yes or No of the functions, you may press
at the same time to LOCK /UNLOCK the unit,
Lock, the unit can only be allowed to adjust volume or transmit and receive.
key while speaking at about 5cm from the microphone for
key simultaneously to select MONITOR ON / OFF.
key simultaneously to select Key Lock ON / OFF
-
6.8 Channel Selection
Press and hold the key until ** CH is blinking, to select the channel number
key and confirm It by pressing
hold the key.
6.9 CTCSS / DCS
During setting, to press the
number by pressing key and confirm it by pressing
6.10Squelch Level
During setting, to press the
pressing key and confirm it by pressing
6.11VOX Voice Operated Transmission
During setting, to press the
key and confirm it by pressing
6.12DW Dual Watch
During setting, to press and the
numberby pressing key and confirm It by pressin
6.13Beep Sound
During setting, to press the
key and confirm it by pressing
6.14BCLO
During setting, to press the
key and confirm it by pressing
6.15Power Selection
During setting, to press the
pressing key and confirm it by pressing
6.16Roger Tone
During setting, to press the
by pressing key and confirm it by pressing
6.17Stand By Light
During setting, to press the
by Pressing key and confirm it by pressing
6.18RESET
During setting, to press the
Pressing key and confirm it by pressi
default, Select (2) for clearing all setting except the selectedchannel number and CTCSS/
DCS. It is recommended not to usethis function unless and until it is necessary to do so.
6.19Intelligent ear-mic adjustmen
When plug in ear microphone, the device will automatically reset the volume to comfort level
( originally set by factory or by user whichever the lower )
6. OPERATION
key until ** CH is blinking, to select the channel number
key and confirm It by pressing key . To select channel qui
key until CTCSS / DCS*** is blinking, to select the CTCSS /DCS
key and confirm it by pressing key.
key until the SL***is blinking, to select the squelch level by
key and confirm it by pressing key. .
VOX Voice Operated Transmission
key until Vo*** is blinking,to select VOX Hi/Low/OFF by
key and confirm it by pressing key.
key until dc*** is blinking, to select DW
key and confirm It by pressing key.
key until bP*** is blinking, to select on/oFF by pressing
key and confirm it by pressing Key.
key until bc*** is blinking, to select on/oFF by pressing
key and confirm it by pressing Key.
key until Po*** is blinking, to select Power Hi/Low by
key and confirm it by pressing Key.
key until RG*** is blinking, to select Roger
key and confirm it by pressing key.
key until bL*** is blinking, to select Stand By Light on/oFF
key and confirm it by pressing key.
key until rS*** is blinking, to select RESET oFF/1
key and confirm it by pressing key. To select (1) for factory
Select (2) for clearing all setting except the selectedchannel number and CTCSS/
DCS. It is recommended not to usethis function unless and until it is necessary to do so.
mic adjustment
When plug in ear microphone, the device will automatically reset the volume to comfort level
( originally set by factory or by user whichever the lower )
key until ** CH is blinking, to select the channel number by pressing
key . To select channel quickly, press and
key until CTCSS / DCS*** is blinking, to select the CTCSS /DCS
key until the SL***is blinking, to select the squelch level by
king,to select VOX Hi/Low/OFF by
elect DW channel
elect on/oFF by pressing
o select on/oFF by pressing
key until Po*** is blinking, to select Power Hi/Low by
Roger Tone oFF/1-3
nking, to select Stand By Light on/oFF
key until rS*** is blinking, to select RESET oFF/1 - 2 by
key. To select (1) for factory
Select (2) for clearing all setting except the selectedchannel number and CTCSS/
DCS. It is recommended not to usethis function unless and until it is necessary to do so.
When plug in ear microphone, the device will automatically reset the volume to comfort level
EN
GL
ISH
-
1.1
CP228
1.2
53 CTCSS 104 DCS DCS(CTCSS DCS)
(16 )
5
PTT (VOX)
(DW)
0.5W
3.7V 1100mAh
,
(RSSI)
,/
()
1.3
CB28
USB CWC18 (S)
1.4
CS28
1.
CH
INE
SE
-
2.
PTT
LCD
USB
CH
INE
SE
-
2.
VO
X
RF
H
:
L :
DC
S
CTC
SS
CH
INE
SE
-
3.1
1. USB
2. AC AC
3. : 3-3.5
1. USB
2. : 3-3.5
1. DC
2.
: 2-2.5
3.2
USB ,FULL
4.1
2
3.
4.
VOL SET STEP 1-16
CH SET TONE SET
DW SET BEEP SET
BLIGHT SETROG SET
CH 1-20 CTCSS / DCS EDIT
OFF / CH OFF / ON
OFF / 1-3
---- ----
---- ----
---- ----
---- ----
OFF / ON
USB
AC
FULL,, .
SQL SET VOX SET
POWER SET BCLO SET
BLIGHT SET
SQL 1-5 OFF / LOW / HI
RESET SET
OFF / 1-2
---- ----
---- ----
-- ----
HI / LOW OFF / ON
,
10
CH
INE
SE
-
, LCD
LCD
(CTCSS 153,DCS 1-104)
SL001 .................................
Uo off ................................
dc off .................................
bP on ................................
bc on .................................
Po Hi .........................................
Rgoff .................................
bL on .................................
rS off .................................
6.1 /
6.2
(
6.3
6.4
,
6.5
6.6
6.7
6.8
** CH
6.
5.
CH
INE
SE
LCD
LCD CTC oFF
.................................
....................
.................................
................................
.................................
.........................................
.................................
...................
.................................
16 , 8 )
5cm
** CH
,
/
-
6.9 CTCSS / DCS /
,
CTCSS / DCS )
6.10
,
(
6.11VOX
, Vo***
6.12DW
,
/
6.13
, bP***
(
6.14BCLO
,
6.15
,
/ L
6.16
,
6.17BLIGHT
,
6.18
,
: 1.
2.
6.19
,
6.
/
CTC/DCS***/
(
)
SL***
1)
Vo***
dc***DW LCD
bP*** /
)
bc***
Po***
L
RG***
bL***
rS***
oFF
(
1-5
/
/
H
1-3
/
1-2
)
CH
INE
SE
-
1.1Introduction
Le talkie-walkie CP228 SMART Business allie qualit et souplesse dans une radio bidirectionnelle
compacte, lgre avec un design de pointe et des caractristiques faciles utiliser.
1.2Caractristiques cls
53CTCSS et 104 DCS
Rglage du volume (116)
S.Q. Niveau de contrle 5 tapes
Transmission commande vocale ( VOX )
Montre double ( DW )
Serrure cl
conomie de batterie
Sortie haut-parleur dune puissance de 0,5 Watt
Batterie Li-Polymre de 3,7V 1100mAh
Balayage de chanesBalayages pour acvit travers diffrentes chanes de communicaon
Foncon de surveillancePermet la surveillance pour les signaux de radio faibles
Verrouillage de chane occupeEmpche la radio dcouter ou de transmere sur ses chanes
RSSIRcepon de lindicaon de force du signal
Indicateur du niveau de batterie
Rglage du son du bip pour lutilisation de tonalits cls.
Rglage de sortie dalimentation H:L
Rglage de la tonalit Roger, pour la transmission de tonalits finales.
Rglage de lindicateur de veille
Rglage intelligent du micro
Rglage de rinitialisation
1.3Accessoires
Pack de batterie Li-polymre CB28
Adaptateur de charge CWC18 (S) incluant le cble micro-USB
Manuel du propritaire
1.4Accessoires en option
Micro/haut-parleur externe
Chargeur rapide CS28 (4 emplacements)
1. INFORMATIONS GENERALES
FR
EN
CH
-
Haut-parleur externe /Cap. Mic
2. CONTRLES ET INDICATEURS
Cl PTT
Cl fonction
Attache pour ceinture
Interrupteur
Pack de batterie
Cl vers le bas
cran LCD
Cl vers le haut
Cl menu
Micro
Haut
Contact de charge
Prise USB
Cl vers le bas
ran LCD
Cl vers le haut
Cl menu
Micro
Haut-parleur
Contact de charge
FR
EN
CH
-
2. CONTRLES ET INDICATEURS
Alimentation RF ( H/L )
Son de bip
Balayage
Verrouillage
Surveillance
Vox
tat de la batterie
Numro de chane
Numro CTCSS/DCS
CTCSS DCS BCLO
conomie dnergie
Montre
double
RSSI
FR
EN
CH
-
3.1Charge
1. Brancher le cble USB la prise USB de lunit et
lautre extrmit du cble USB ladaptateur AC.
2. Brancher ladaptateur AC dans la prise lectriqu
3. La charge complte prendra de 3 3,5 heures
Ou
1. Brancher le cble USB la prise USB de lunit et
lautre extrmit du cble USB au port USB de lordinateur.
2. La charge complte prendra de 3 3,5 heures
Ou
1. Brancher ladaptateur AC dans la prise lectrique standard
2. Insrer le Talkie-Walkie dans le bac de chargement pour
tre charg. La charge complte prendra de 2 2,5 heures
3.2tat de charge
1. Charge En utilisant lUSB, lors de la fin de la charge, le symbole
2. En utilisant le chargeur rapide, un tmoin lumineux vert apparatra.
4.1Rglage du menu
Appuyer et maintenir la touche
pour choisir le menu dsir et appuyer sur la touche
puis appuyer sur la touche
Si aucune opration n'est effectue aprs 10 sec
du menu.
3. CHARGER LA BATTERIE
4. RGLAGE DU MENU
RG VOL TAPE 1-16
RG CH RG TONALIT
RG DW RG BIP
RG BLIGHTRG ROG
CH 1-20 CTCSS / DITER DCS
ARRT/CH 1-20
ARRT/MARCHE
ARRT
ARRT/1-3 ARRT/MARCH
1. Brancher le cble USB la prise USB de lunit et
lautre extrmit du cble USB ladaptateur AC.
2. Brancher ladaptateur AC dans la prise lectrique standard.
3. La charge complte prendra de 3 3,5 heures
1. Brancher le cble USB la prise USB de lunit et
lautre extrmit du cble USB au port USB de lordinateur.
2. La charge complte prendra de 3 3,5 heures
adaptateur AC dans la prise lectrique standard
Walkie dans le bac de chargement pour
tre charg. La charge complte prendra de 2 2,5 heures
1. Charge En utilisant lUSB, lors de la fin de la charge, le symbole PLEIN saffichera.
2. En utilisant le chargeur rapide, un tmoin lumineux vert apparatra.
plus de 2 sec. pour entrer en mode Menu, appuyer sur la touche
e menu dsir et appuyer sur la touche pour slectionner la fonction,
pour la sauvegarder.
Si aucune opration n'est effectue aprs 10 secondes, cela quittera automatiquement le rglage
RG TONALIT RG SQL RG VOX
RG
PUISSANCE RG BCLO
RG BLIGHT
DITER DCS SQL 1-5 ARRT/FAIBLE/LEV
ARRT/MARCHE
RG RINITIALISTAION
ARRT/1-2 ARRT/MARCH
LEV/FAIBLE
ARRT ARRT/MARCHE
ARRT
saffichera.
ec. pour entrer en mode Menu, appuyer sur la touche
pour slectionner la fonction,
ondes, cela quittera automatiquement le rglage
ARRT/FAIBLE/LEV
FR
EN
CH
-
Appuyer et maintenir la touche
Appuyer et maintenir la touche
touche pour slectionner le
Appuyer sur la touche
pour slectionner votre CTCSS/DCS ( CTCSS 1
Appuyer sur la touche
touche pour obtenir les autres fonctions, appuyer sur la touche
slectionner Oui ou Non des fonctions, vous pouvez appuyer sur la touche
moment pour terminer ce rglage.
SL001 ............................
Uo teint ......................
dc teint .......................
bP allum .....................
bc allum ......................
Po lev ..............................
RG teint ........................
bL allum ......................
rS teint ........................
Appuyer sur la touche
VERROUILLER/DVERROUILLER lunit, aprs
Autorise pour rgler le volume ou transmettre et recevoir.
6.1 Mise sous tension/hors tension
Pour allumer la radio ou lteindre, appuyer et maintenir la tension sur la touche
6.2 Volume
Rgler le niveau du volume en utilisant la touche
6.3 Transmission
Appuyer et maintenir la touche
la transmission. Relcher la touche
6.4 Rception
couter lactivit sur la chaine slectionne.
6.5 cran
Appuyer en mme temps sur la touche
ECRAN MARCHE/ARRT.
6.6 Balayage
Appuyer en mme temps sur la touche
MARCHE /ARRT
5. BRVE NOTE DE RGLAGE DE CHANE
6. FONCTIONNEMENT
Mise hors
Transmission
Montre double
Son de bip
Clignotement du tmoin lumineux arrire
Rinitialisation
Verrouillage
Tonalit
Roger
Niveau
FR
EN
CH
Appuyer et maintenir la touche sur le haut de lunit.
Appuyer et maintenir la touche jusqu ce que la lettre CH clignote, appuyer sur a
pour slectionner le numro de chane.
et lcran affichera arrt CTC, appuyer sur la touche
CTCSS/DCS ( CTCSS 1 53, DCS 1 104 ) souhait
pour terminer ce rglage ou appuyer nouveau sur la
pour obtenir les autres fonctions, appuyer sur la touche
slectionner Oui ou Non des fonctions, vous pouvez appuyer sur la touche
terminer ce rglage.
sur le ct et en mme temps sur la touche
VERROUILLER/DVERROUILLER lunit, aprs Verrouillage, lunit peut uniquement tre
pour rgler le volume ou transmettre et recevoir.
Mise sous tension/hors tension
umer la radio ou lteindre, appuyer et maintenir la tension sur la touche
Rgler le niveau du volume en utilisant la touche (16 tapes, dfaut 8)
tout en parlant environ 5cm du micro pour
la transmission. Relcher la touche pour revenir au mode veille.
couter lactivit sur la chaine slectionne.
Appuyer en mme temps sur la touche et la touche pour slectionner
Appuyer en mme temps sur la touche et la touche pour slectionner BALAYAGE
BRVE NOTE DE RGLAGE DE CHANE
Mise hors
Transmission VOX par commande vocale active
Montre double
Son de bip
Clignotement du tmoin lumineux arrire
Rinitialisation
Verrouillage de la chane en cours
Tonalit du bip
Roger
Niveau
gnote, appuyer sur a
et lcran affichera arrt CTC, appuyer sur la touche
104 ) souhait
pour terminer ce rglage ou appuyer nouveau sur la
pour
slectionner Oui ou Non des fonctions, vous pouvez appuyer sur la touche tout
sur le ct et en mme temps sur la touche pour
Verrouillage, lunit peut uniquement tre
umer la radio ou lteindre, appuyer et maintenir la tension sur la touche .
(16 tapes, dfaut 8)
n 5cm du micro pour
pour slectionner
pour slectionner BALAYAGE
par commande vocale active
-
6.7 Serrure cl
Appuyer en mme temps sur la touche
cl MARCHE/ARRT
6.8 Slection de chanes
Appuyer et maintenir la touche
chane en appuyant sur la touche
Slectionner rapidement la chane, app
6.9 CTCSS / DCS
Pendant le rglage, appuyer sur la touche
slectionner le numro CTCSS /DCS
sur la touche .
6.10Niveau daccord
Pendant le rglage, appuyer sur la touche
daccord en appuyant sur la touche
6.11Transmission commande voc
Pendant le rglage, appuyer sur la touche
VOX leve/faible/OFF en appuyant sur la touche
touche .
6.12Montre double DW
Pendant le rglage, appuyer sur la touche
le numro de chane DW en appuyant sur la touche
touche .
6.13Bip sonore
Pendant le rglage, appuyer sur la touche
slectionner on/oFF en appuyant sur
touche .
6.14BCLO
Pendant le rglage, appuyer sur la touche
slectionner marche/ARRT en appuyant sur
touche .
6.15Slection de la puissance
Pendant le rglage, appuyer sur la touche
slectionner la puissance leve/faible en
appuyant sur la touche
6.16Tonalit Roger
Pendant le rglage, appuyer sur la touche
slectionner la tonalit Roger ARRT/1
appuyant sur la touche
6. FONCTIONNEMENT
Appuyer en mme temps sur la touche et la touche pour slectionner Serrure
jusqu ce que ** CH clignote, slectionner le numro de
et confirmer en appuyant sur la touche
Slectionner rapidement la chane, appuyer et maintenir la touche
Pendant le rglage, appuyer sur la touche jusqu ce que CTCSS / DCS***
slectionner le numro CTCSS /DCS en appuyant sur la touche et confirmer en appuyant
Pendant le rglage, appuyer sur la touche jusqu ce que SL*** , slectionner le niveau
appuyant sur la touche et confirmer en appuyant sur la touche
Transmission commande vocale VOX
Pendant le rglage, appuyer sur la touche jusqu ce que Vo*** clignote, slectionner
appuyant sur la touche et confirmer en appuyant sur la
, appuyer sur la touche jusqu ce que dc*** clignote, s
en appuyant sur la touche et confirmer en appuyant sur la
Pendant le rglage, appuyer sur la touche jusqu' ce que bP *** clignote, pour
slectionner on/oFF en appuyant sur la touche et confirmer en appuyant sur la
Pendant le rglage, appuyer sur la touche jusqu' ce que bc *** clignote, pour
ner marche/ARRT en appuyant sur la touche et confirmer en appuyant sur la
Pendant le rglage, appuyer sur la touche jusqu' ce que Po *** clignote, pour
e/faible en appuyant sur la touche
.
Pendant le rglage, appuyer sur la touche jusqu' ce que RG *** clignote, pour
slectionner la tonalit Roger ARRT/1-3 en appuyant sur la touche
.
pour slectionner Serrure
clignote, slectionner le numro de
et confirmer en appuyant sur la touche .
.
CTCSS / DCS*** clignote,
et confirmer en appuyant
, slectionner le niveau
et confirmer en appuyant sur la touche .
clignote, slectionner
et confirmer en appuyant sur la
clignote, slectionner
et confirmer en appuyant sur la
clignote, pour
et confirmer en appuyant sur la
clignote, pour
et confirmer en appuyant sur la
clignote, pour
et confirmer en
clignote, pour
et confirmer en
FR
EN
CH
-
6.17Tmoin de veille
Pendant le rglage, appuyer sur la touche
slectionner le tmoin de veille marche/arrt
en appuyant sur la touche
6.18REINITIALISATION
Pendant le rglage, appuyer sur la touche
slectionner REINITIALISATION ARRT/1
en appuyant sur la touche
effacer tous les rglages except le numro de chane slectionne et le CTCSS/DCS. Il est
recommand de ne pas utiliser cette fonction tant que
6.19Rglage intelligent du micro
Lorsque le microphone est branch, l'appareil rtablit automatiquement le volume au niveau confort
(rgl l'origine par l'usine ou par l'utilisateur selon la valeur la plus basse)
6. FONCTIONNEMENT
FR
EN
CH
Pendant le rglage, appuyer sur la touche jusqu' ce que bL *** clignote, pour
slectionner le tmoin de veille marche/arrt en appuyant sur la touche
.
Pendant le rglage, appuyer sur la touche jusqu' ce que rS *** clignote, pour
slectionner REINITIALISATION ARRT/1 - 2 en appuyant sur la touche
. Slectionner (1) par dfaut dusine Slectionner (2) pour
effacer tous les rglages except le numro de chane slectionne et le CTCSS/DCS. Il est
recommand de ne pas utiliser cette fonction tant que cela n'est pas ncessaire.
Rglage intelligent du micro-casque
Lorsque le microphone est branch, l'appareil rtablit automatiquement le volume au niveau confort
(rgl l'origine par l'usine ou par l'utilisateur selon la valeur la plus basse)
clignote, pour
et confirmer
clignote, pour
et confirmer
. Slectionner (1) par dfaut dusine Slectionner (2) pour
effacer tous les rglages except le numro de chane slectionne et le CTCSS/DCS. Il est
cela n'est pas ncessaire.
Lorsque le microphone est branch, l'appareil rtablit automatiquement le volume au niveau confort
-
1.1Einfhrung
Das CP228 SMART Business Walkie Talkie verbindet die Qualitt und Vielseitigkeit eines kompakten,
leichten, tragbaren Zwei-Wege-Funkgertes mit einem modernen Design und
benutzerfreundlichen Features.
1. 2Hauptmerkmale
53CTCSS und 104 DCS
Lautstrkeneinstellung (1 16)
S.Q. Pegelsteuerung mit 5 Stufen
Voice Operated Transmission ( VOX )
Dual Watch (DW)
Tastensperre
Batterie-Schonung
0,5 Watt Hochleistungs- Lautsprecher-Ausgang
3,7V 1100mAh Li-Polymer-Batterie
Channel ScanScans fr die Akvitt ber verschiedene Kommunikaonskanle
berwachungsfunktion - ermglicht das berwachen schwacher Funksignale
Busy Channel-SperreVerhindert das Mithren oder bertragen ber seine Kanle
RSSIReceiving signal strengte indication (= Anzeige der Signalstrke)
Batteriestandsanzeiger
Piepser-Ton- Einstellung der Tastentne.
Einstellung der Ausgangsleistung H:L
Einstellung des Roger Tones zur bertragung der Endtne.
Einstellung der Standby-Anzeige
Intelligente Ohr-Mikrofon-Einstellung
Zurcksetzen der Einstellungen
1. 3Zubehr
CB28-Li-Polymer-Batterie
CWC18 (S) Auflade-Adapter einschlielich Micro-USB-Kabel
Handbuch des Besitzers
1.4Optionaler Zubehr
Externer Lautsprecher/Mikrofon
CS28 Schnellladegert (4 Schlitze)
1. ALLGEMEINE INFORMATION G
ER
MA
N
-
Externer Lautsprecher
/Mic.Cap
2. STEUERUNGEN UND ANZEIGEN
PTT-Taste
Funktionstaste
Grtel-Clip
Netzschalter
Batterie
GE
RM
AN
STEUERUNGEN UND ANZEIGEN
LCD-
Men
Mikrofon
Lautsprecher
Auflade- Kontakt
USB-Buchse
Nach unten
Nach oben
-Display
Men-Taste
Mikrofon
Lautsprecher
Kontakt
Nach unten -Taste
Nach oben-Taste
-
2. STEUERUNGEN UND ANZEIGEN
HF-Leistung (H/L) Piepser-Ton
Scannen Sperren
Monitor
Vox
Ladezustand der Batterie
Kanal CTCSS-/DCS
CTCSS DCS BCLO
Stromsparen
Dual Watch
RSSI
GE
RM
AN
-
3.1Aufladen
1. Schlieen Sie das USB-Kabel an die USB
andere Ende des USB-Kabels an den Wechselstrom
2. Stecken Sie den Wechselstrom
3. Eine Vollladung dauert 3 bis 3,5 Stunden
Oder
1. Schlieen Sie das USB-Kabel an die USB
andere Ende des USB-Kabels an den USB
2. Eine Vollladung dauert 3 bis 3,5 Stunden
Oder
1. Stecken Sie den Wechselstrom
2. Stellen Sie das Walkie Talkie zum Aufladen
Eine Vollladung dauert 2 bis 2,5 Stunden
3.2Aufladestatus
1. Aufladen mit USB-Kabel; ist der Aufladevorgang abgeschlossen,
wird das FULL-Symbol angezeigt.
2. Auf dem Schnellladegert wird grnes Licht angezeigt.
4.1Meneinstellungen
Drcken Sie die Taste und halten Sie sie ln
Men-Modus zu gelangen, drcken Sie die
und drcken Sie die Taste, um die Funktion auszuwhlen, drcken Sie dann die
Taste, um sie zu speichern. Wenn
Meneinstellung automatisch beendet.
3. AUFLADEN DER BATTERIE
4. MENEINSTELLUNGEN
LAUTST
RKENEI
SCHRITT
1-16
CH-SATZ TONSATZ
DW-SATZ PIEPSER-SATZ
BLIGHT-SATZ ROG-SATZ
CH 1-20 CTCSS DCS EDIT
OFF / CH 1-20
OFF / ON
OFF / 1-3 OFF / ON
GE
RM
AN
Kabel an die USB-Buchse und das
Kabels an den Wechselstrom-Adapter an.
2. Stecken Sie den Wechselstrom-Adapter in eine Standardsteckdose.
3. Eine Vollladung dauert 3 bis 3,5 Stunden
Kabel an die USB-Buchse und das
Kabels an den USB-Port des Computers an.
2. Eine Vollladung dauert 3 bis 3,5 Stunden
Stecken Sie den Wechselstrom-Adapter in eine Standardsteckdose.
Stellen Sie das Walkie Talkie zum Aufladen auf das Aufladegert.
Eine Vollladung dauert 2 bis 2,5 Stunden
Kabel; ist der Aufladevorgang abgeschlossen,
Symbol angezeigt.
2. Auf dem Schnellladegert wird grnes Licht angezeigt.
Taste und halten Sie sie lnger als 2 Sekunden gedrckt, um in den
zu gelangen, drcken Sie die Taste, um das gewnschte Men auszuwhlen,
Taste, um die Funktion auszuwhlen, drcken Sie dann die
Taste, um sie zu speichern. Wenn 10 Sekunden nicht in Betrieb, wird die
Meneinstellung automatisch beendet.
SQL-SATZ VOX-SATZ
POWER-SATZ BCLO-SATZ
SQL 1-5 OFF / LOW / HI
RESET-SATZ
OFF / 1-2
HI / LOW OFF / ON
ger als 2 Sekunden gedrckt, um in den
Taste, um das gewnschte Men auszuwhlen,
Taste, um die Funktion auszuwhlen, drcken Sie dann die
10 Sekunden nicht in Betrieb, wird die
-
Drcken Sie die Taste oben auf dem Gert und halten Sie sie gedrckt.
Drcken Sie die Taste und hal
drcken Sie die Taste, um den Kanal auszuwhlen.
Drcken Sie die Taste, und auf dem Bildschirm wird CTC angezeigt, drcken Sie die
Taste, um Ihre gewnschte
Drcken Sie die
Taste erneut, um zu anderen Funktion
Ja oder Nein der Funktionen, Sie knnen jederzeit di
Einstellung abzuschlieen.
SL001 ....................................
Uo aus ..................................
dc aus ...................................
bP an ....................................
Bc an .....................................
Po Hi .............................................
Rgoff ....................................
BL an ....................................
rS aus ...................................
Drcken Sie die Taste an der Sei
SPERREN/ENTSPERREN, nach dem Sperren knnen nur noch die Lautstrke des Gertes oder
die bertragung und der Empfang des Gertes eingestellt werden.
6.1Ein- / Ausschalten
Um das Gert ein- oder auszuschalten, drcken Sie die
6.2 Lautstrke
Stellen Sie die Lautstrke mit der
6.3bertragung
Drcken Sie die Taste und halten Sie sie gedrckt, whrend Si
einem Abstand von 5 cm vom Mikrofon sprechen. Lassen Sie die
den Standby-Modus zurckzukehren.
6.4 Empfang
Hren Sie der Aktivitt auf dem ausgewhlten Kanal zu.
6.5 Bildschirm
Drcken Sie die Taste und die
6.6 Scan
Drcken Sie die Taste und die
6.7 Tastensperre
Drcken Sie die Taste und die
5. KANALEINSTELLUNG KURZER HINWEIS
6. BETRIEB
Taste oben auf dem Gert und halten Sie sie gedrckt.
Taste und halten Sie sie gedrckt, bis der Buchstabe CH blinkt
Taste, um den Kanal auszuwhlen.
Taste, und auf dem Bildschirm wird CTC angezeigt, drcken Sie die
Taste, um Ihre gewnschte CTCSS / DCS (CTCSS 1-53, DCS 1-104) auszuwhlen
Taste, um diese Einstellung abzuschlieen, oder drcken Sie die
Taste erneut, um zu anderen Funktionen zu gelangen, drcken Sie die
Ja oder Nein der Funktionen, Sie knnen jederzeit die Taste drcken, u
....................................
..................................
...................................
....................................
..........................
.............................................
....................................
...................................
Taste an der Seite und gleichzeitig die Taste, um das Gert zu
SPERREN/ENTSPERREN, nach dem Sperren knnen nur noch die Lautstrke des Gertes oder
die bertragung und der Empfang des Gertes eingestellt werden.
uszuschalten, drcken Sie die Taste und halten Sie sie gedrckt.
Taste ein (16 Stufen, Standard 8) ein.
Taste und halten Sie sie gedrckt, whrend Sie zur bertragung mit
einem Abstand von 5 cm vom Mikrofon sprechen. Lassen Sie die Taste los, um in
Modus zurckzukehren.
Hren Sie der Aktivitt auf dem ausgewhlten Kanal zu.
te und die Taste gleichzeitig, um MONITOR ON / OFF auszuwhlen.
Taste und die Taste gleichzeitig, um SCAN ON / OFF auszuwhlen.
Taste und die Taste gleichzeitig, um Tastensperre ON / OFF auszuwhlen.
KANALEINSTELLUNG KURZER HINWEIS
Power aus
VOX Voice Aktivierte bertragung
Dual Watch
Piepser-Ton
Hintergrundlicht blinkt
Zurcksetzen
Busy ChannelSperre
Roger Piepser-Ton
Squelchpegel
Taste oben auf dem Gert und halten Sie sie gedrckt.
ten Sie sie gedrckt, bis der Buchstabe CH blinkt,
Taste, und auf dem Bildschirm wird CTC angezeigt, drcken Sie die
104) auszuwhlen
um diese Einstellung abzuschlieen, oder drcken Sie die
en zu gelangen, drcken Sie die Taste
Taste drcken, um diese
Taste, um das Gert zu
SPERREN/ENTSPERREN, nach dem Sperren knnen nur noch die Lautstrke des Gertes oder
Taste und halten Sie sie gedrckt.
e zur bertragung mit
Taste los, um in
Taste gleichzeitig, um MONITOR ON / OFF auszuwhlen.
Taste gleichzeitig, um SCAN ON / OFF auszuwhlen.
stensperre ON / OFF auszuwhlen.
GE
RM
AN
-
6.8 Kanalauswahl
Drcken Sie die Taste und halten Sie sie gedrckt, bis ** CH blinkt, um den Kanal ber
die Taste auszuwhlen, und besttigen Sie mit der
schnell auszuwhlen, drcken Sie die
6.9 CTCSS / DCS
Drcken Sie beim Einstellen die
auszuwhlen, drcken Sie die
6.10Squelchpegel
Drcken Sie beim Einstellen die
indem Sie die Taste drcken und besttigen Sie mit der
6.11VOX Voice Operated Transmission
Drcken Sie beim Einstellen die
der Taste auszuwhlen, und besttigen Sie mit der
6.12DW Dual Watch
Drcken Sie beim Einstellen die
Taste auszuwhlen, und besttigen Sie mit der
6.13Piepser-Ton
Drcken Sie beim Einstellen die
Taste ON/OFF auszuwhlen, und besttigen Sie mit der
6.14BCLO
Drcken Sie beim Einstellen die
ON/OFF auszuwhlen, und besttigen Sie mit der
6.15Power-Auswahl
Drcken beim Einstellen die
Power Hi/Low auszuwhlen, und besttigen Sie mit der
6.16Roger-Ton
Drcken Sie beim Einstellen die
Roger Tone oFF/1-3 auszuwhlen, und besttigen Sie mit der
6.17Standby-Licht
Drcken Sie beim Einstellen die
Taste Standby Light on/oFF, und besttigen Sie mit der
6.18RESET
Drcken Sie beim Einstellen die
RESET Tone oFF/12 auszuwhlen und besttigen
die Werkseinstellung auszuwhlen, whlen Sie (2) fr alle Einstellungen mit Ausnahme der Nummer
und CTCSS Clearing/DCS. Wir empfehlen, die
6.19Intelligente Einstellung des Ohr
Wenn Sie das Ohrmikrofon einstecken, setzt das Gert die Lautstrke automatisch auf
die Komfort-Lautstrke zurck (Ursprngliche Werkseinstellung oder die Benutz
welche auch immer niedriger ist)
6. BETRIEB
GE
RM
AN
Taste und halten Sie sie gedrckt, bis ** CH blinkt, um den Kanal ber
len, und besttigen Sie mit der Taste. Um den Kanal
n, drcken Sie die Taste und halten Sie sie gedrckt.
Taste, bis CTCSS / DCS *** blinkt, um die CTCSS / DCS
Taste und besttigen Sie mit der
Taste, bis SL***blinkt, um den Selch-
Taste drcken und besttigen Sie mit der
VOX Voice Operated Transmission
Taste, bis Vo*** blinkt, um VOX Hi/Low/OFF mit
Taste auszuwhlen, und besttigen Sie mit der Taste.
Taste, bis dc*** blinkt, um den DW-Kana
len, und besttigen Sie mit der Taste.
Taste, bis bP*** blinkt, um mit der
Taste ON/OFF auszuwhlen, und besttigen Sie mit der Taste.
Taste, bis bc*** blinkt, um mit der
und besttigen Sie mit der Taste.
Taste, bis Po*** blinkt, um mit der
Power Hi/Low auszuwhlen, und besttigen Sie mit der Taste.
Taste, bis RG*** blinkt, um mit der
3 auszuwhlen, und besttigen Sie mit der Taste.
Taste, bis bL*** blinkt, whlen Sie mit der
oFF, und besttigen Sie mit der Taste.
Taste, bis rS*** blinkt, um mit der
RESET Tone oFF/12 auszuwhlen und besttigen Sie mit der Taste. Um (1)
die Werkseinstellung auszuwhlen, whlen Sie (2) fr alle Einstellungen mit Ausnahme der Nummer
und CTCSS Clearing/DCS. Wir empfehlen, diese nicht zu benutzen, es sei denn es ist notwendig.
Intelligente Einstellung des Ohr-Mic
Wenn Sie das Ohrmikrofon einstecken, setzt das Gert die Lautstrke automatisch auf
Lautstrke zurck (Ursprngliche Werkseinstellung oder die Benutz
Taste und halten Sie sie gedrckt, bis ** CH blinkt, um den Kanal ber
Taste. Um den Kanal
Taste und halten Sie sie gedrckt.
Taste, bis CTCSS / DCS *** blinkt, um die CTCSS / DCS-Kanal
Taste.
-Pegel auszuwhlen,
Taste.
Taste, bis Vo*** blinkt, um VOX Hi/Low/OFF mit
Taste.
Kanal mit der
Taste
Taste
Taste
Taste, bis bL*** blinkt, whlen Sie mit der
Taste
. Um (1)
die Werkseinstellung auszuwhlen, whlen Sie (2) fr alle Einstellungen mit Ausnahme der Nummer
se nicht zu benutzen, es sei denn es ist notwendig.
Wenn Sie das Ohrmikrofon einstecken, setzt das Gert die Lautstrke automatisch auf
Lautstrke zurck (Ursprngliche Werkseinstellung oder die Benutzereinstellung,
-
1.1Introduccin
El walkie-talkie CP228 SMART Business combina calidad y flexibilidad en una radio de dos vas
compacta, ligera y porttil con un diseo vanguardista y caractersticas de uso fcil.
1.2Caractersticas clave
53CTCSS y 104 DCS
Ajuste de volumen (116)
S.Q. Control de nivel en 5 pasos
Transmisin activada por voz ( VOX )
Doble escucha ( DW )
Cerradura con llave
Ahorro de batera
Salida de altavoz de potencia de 0.5Watt
Batera de polmero de litio de 3.7V 1100mAh
Escaneo de canales Escaneos de actividad por diferentes canales de comunicacin
Funcin de monitoreo Permite monitoreo para las seales de radio dbiles
Cierre de canal ocupadoImpide la radio escuchar o transmitir en sus canales
RSSIIndicador de fuerza de la seal recibida
Indicador del nivel de batera
Ajuste del sonido de pitido para el uso de los tonos de teclas.
Ajuste de salida de potencia H:L
Ajuste del tono Roger, para la transmisin de tonos finales.
Ajuste del indicador de espera
Ajuste inteligente del micrfono
Ajuste de restablecimiento
1.3Accesorios
CB28 Paquete de batera de polmero de litio
Adaptador de carga CWC18 (S), incluso cable Micro-USB
Manual de propietario
1.4Accesorios opcionales
Micrfono/ Altavoz externo
Cargador rpido CS28 (4 tomas)
1. INFORMACIN GENERAL
SP
AN
ISH
-
Altavoz externo /Mic.Cap
2. MANDOS E INDICADORES
Tecla PTT
Tecla de funcin
Pinza de
cinturn
Interruptor
Paquete de bateras
SP
AN
ISH
Tecla abajo
Pantalla
Tecla arriba
Tecla de men
Micr
Altavoz
Enchufe de carga
Toma USB
Tecla abajo
Pantalla LCD
Tecla arriba
Tecla de men
Micrfono
Altavoz
-
2. MANDOS E INDICADORES
Alimentacin RF ( H/L )
Sonido de pitido
Escaneo
Cierre
Monitoreo
Vox
Estado de la batera
Nmero de canal
CTCSS DCS BCLO
Ahorro de energa
Doble escucha
RSSI
Nmero CTCSS/DCS
SP
AN
ISH
-
3.1Carga
1. Conectar el cable USB a la toma USB de la unidad y la otra extremidad del cable
USB al adaptador CA.
2. Conectar el adaptador CA a un
3. La carga completa se efectuar de
O
1. Conectar el cable USB a la toma USB de la unid
otra extremidad del cable USB al
2. La carga completa se efectuar de
O
1. Enchufar el adaptador CA a un enchufe
2. Insertar el walkie-talkie en el soporte de carga para
cargar. La carga completa se efectuar de
3.2Estado de carga
1. En caso de carga va USB, una vez completada la carga, el smbolo
2. Usando el cargador rpido, aparecer una luz verde
4.1Ajuste del men
Pulsar y mantener pulsada la tecla
pulsar la tecla para elegir el men deseado y pulsar la tecla
funcin, luego pulsar la tecla
de 10 segundos, el ajuste del men
3. CARGAR LA BATERA
4. AJUSTE DEL MEN
AJ VOL PASO 1-16
AJ CH AJ TONO
AJ DW AJ PITIDO
AJ BLIGHT AJ ROG
CH 1-20 CTCSS / REVISAR DCS
APAGADO/ CH 1-20
APAGADO / ENCENDIDO
APAGADO / 1-3 APAGADO / ENCENDIDO
SP
AN
ISH
a la toma USB de la unidad y la otra extremidad del cable
un enchufe elctrico estndar.
se efectuar de 3 a 3.5 horas
Conectar el cable USB a la toma USB de la unidad y la
tra extremidad del cable USB al puerto USB del ordenador.
se efectuar de 3 a 3.5 horas
a un enchufe elctrico estndar
alkie en el soporte de carga para
se efectuar de 2 a 2.5 horas
, una vez completada la carga, el smbolo "COMPLETO" se visualizar.
2. Usando el cargador rpido, aparecer una luz verde.
mantener pulsada la tecla durante ms de 2 segundos para entrar en el modo Men,
l men deseado y pulsar la tecla para seleccionar la
para guardarla. Si ninguna operacin se ha efectuado dentro
segundos, el ajuste del men se abandonar automticamente.
AJ SQL AJ VOX
AJ POTENCIA AJ BCLO
SQL 1-5 APAGADO / BAJA/ ALTA
AJ RESTABLECIMIENTO
APAGADO / 1-2 / ENCENDIDO
ALTO/ BAJO APAGADO / ENCENDIDO
a la toma USB de la unidad y la otra extremidad del cable
"COMPLETO" se visualizar.
durante ms de 2 segundos para entrar en el modo Men,
para seleccionar la
racin se ha efectuado dentro
-
Pulsar y mantener pulsada la tecla
Pulsar y mantener pulsada la
pulsar la tecla para seleccionar el nmero del canal.
Pulsar la tecla y la pantalla visualizar apagado CTC, pulsar la tecla
seleccionarsu CTCSS/DCS ( CTCSS 1
Pulsar la tecla
obtener las otras funciones, pulsar la tecla
funciones, usted puede pulsar la tecla
ajuste.
SL001 ..............................................
Uo off ..............................................
dc off ...............................................
bP on ...............................................
bc on ...............................................
Po Hi ..........................................................
RG off .............................................
bL on ..............................................
rS off .........................................................
Pulsar la tecla en la parte y al mismo tiempo la tecla
la unidad, despus Cierre, la unidad puede autorizarse solo para ajustar el volumen o
transmitir y recibir.
6.1 Encender/ Apagar
Para encender o apagar la radio, pulsar y mantener pulsado la tecla
6.2 Volumen
Ajustar el nivel del volumen usando la tecla
6.3 Transmisin
Pulsar y mantener pulsada la tecla
la transmisin. Liberar la tecla
6.4 Recepcin
Escuchar la actividad en el canal seleccionado.
6.5 Pantalla
Pulsar simultneamente la tecla
ENCENDIDA/ APAGADA.
6.6 Escaneo
Pulsar simultneamente la tecla
APAGADO
6.7 Cierre con llave
Pulsar simultneamente la tecla
ENCENDIDO/ APAGADO
5. NOTAS BREVES DEL AJUSTE DE CANAL
6. FUNCIONAMIENTO
Pulsar y mantener pulsada la tecla en la parte superior de la unidad.
Pulsar y mantener pulsada la tecla hasta que la letra CH empiece a parpadear,
para seleccionar el nmero del canal.
y la pantalla visualizar apagado CTC, pulsar la tecla
seleccionarsu CTCSS/DCS ( CTCSS 1 53, DCS 1 104 ) deseado.
para completar este ajuste o volver a pulsar la tecla
obtener las otras funciones, pulsar la tecla para seleccionar S o No de las
usted puede pulsar la tecla en cualquier momento para completar el
..............................................
off ..............................................
off ...............................................
on .........................................................
on ...............................................
..........................................................
off .............................................
on ..............................................
.................................................
en la parte y al mismo tiempo la tecla para CERRAR/ ABRIR
Cierre, la unidad puede autorizarse solo para ajustar el volumen o
Para encender o apagar la radio, pulsar y mantener pulsado la tecla .
Ajustar el nivel del volumen usando la tecla (16 pasos, 8 preestablecidos
hablando a una distancia de 5 cm del micrfono para
para volver al modo de espera.
Escuchar la actividad en el canal seleccionado.
y la tecla para seleccionar PANTALLA
y la tecla para seleccionar ESCANEO
y la tecla para seleccionar CIE
NOTAS BREVES DEL AJUSTE DE CANAL
Apagar
Transmisin activada por voz VOX
Doble escucha
Sonido de pitido Parpadeo de la luz trasera
Restablecimiento
Cierre de canal ocupado
Sonido de pitido Roger
Nivel de Silenciador
en la parte superior de la unidad.
hasta que la letra CH empiece a parpadear,
y la pantalla visualizar apagado CTC, pulsar la tecla para
para completar este ajuste o volver a pulsar la tecla para
para seleccionar S o No de las
momento para completar el
para CERRAR/ ABRIR
Cierre, la unidad puede autorizarse solo para ajustar el volumen o
preestablecidos)
ando a una distancia de 5 cm del micrfono para
ara seleccionar PANTALLA
para seleccionar ESCANEO ENCENDIDO/
para seleccionar CIERRE CON LLAVE
Transmisin activada por voz VOX
SP
AN
ISH
-
6.8 Seleccin de canal
Pulsar y mantener pulsada la tecla
nmero de canal pulsando la tecla
seleccionar rpidamente el canal, pulsar y
6.9 CTCSS / DCS
Durante el ajuste, pulsar la tecla
el nmero CTCSS /DCS pulsando la tecla
6.10Nivel de silenciador
Durante el ajuste, pulsar la tecla
de silenciador pulsando la tecla
6.11Transmisin activada par voz
Durante el ajuste, pulsar la tecla
Alta/Baja/Apagado pulsando la tecla
6.12Escucha doble DW
Durante el ajuste, pulsar la tecla
canal DW pulsando la tecla
6.13Sonido de pitido
Durante el ajuste, pulsar la tecla
on/oFF pulsando la tecla
6.14BCLO
Durante el ajuste, pulsar la tecla
on/oFF pulsando la tecla
6.15Seleccin de potencia
Durante el ajuste, pulsar la tecla
potencia alta/ baja pulsando la tecla
6.16Tono Roger
Durante el ajuste, pulsar la tecla
Roger APAGADO/1-3 pulsando la tecla
6.17Luz de espera
Durante el ajuste, pulsar la tecla
Espera Encendido/ Apagado pulsando la tecla
6.18RESTABLECIMIENTO
Durante el ajuste, pulsar la tecla
RESTABLECIMIENTO Apagado/1 - 2 pulsando la tecla
. Seleccionar (1) para preestablecimiento de fbrica,
los ajustes excepto el nmero de canal seleccionado y CTCSS/DCS. Se recomienda no u
funcin excepto si es necesario.
6.19Ajuste inteligente del auricular con micrfono
Cuando el micrfono est conecta
nivel de confort (ajustado originariamente en la fbrica o par
6. FUNCIONAMIENTO
SP
AN
ISH
hasta que ** CH empiece a parpadear, seleccionar el
nmero de canal pulsando la tecla y confirmar pulsando la tecla
nar rpidamente el canal, pulsar y mantener pulsada la tecla
hasta que CTCSS / DCS*** empiece a parpadear, seleccionar
pulsando la tecla y confirmar pulsando la tecla
hasta que SL***empiece a parpadear, seleccionar el nivel
y confirmar pulsando la tecla
a par voz VOX
Durante el ajuste, pulsar la tecla hasta que Vo*** empiece a parpadear, seleccionar VOX
pulsando la tecla y confirmar pulsando la tecla
hasta que dc*** empiece a parpadear, seleccionar el nmero de
y confirmar pulsando la tecla
hasta que bP*** empiece a parpadear, selec
y confirmar pulsando la tecla
hasta que bc*** empiece a parpadear, seleccionar
y confirmar pulsando la tecla
hasta que Po*** empiece a parpadear, seleccionar la
potencia alta/ baja pulsando la tecla y confirmar pulsando la tecla
hasta que RG*** empiece a parpadear, seleccionar
pulsando la tecla y confirmar pulsando la tecla
hasta que bL*** empiece a parpadear, seleccionar Luz de
pulsando la tecla y confirmar pulsando la tecla
hasta que rS*** empiece a parpadear, seleccionar
2 pulsando la tecla y confirmar pulsando la tecla
. Seleccionar (1) para preestablecimiento de fbrica, seleccionar (2) para borrar todos
el nmero de canal seleccionado y CTCSS/DCS. Se recomienda no u
auricular con micrfono
do, el dispositivo restablecer automticamente el volumen en el
(ajustado originariamente en la fbrica o par el usuario segn el valor ms bajo)
hasta que ** CH empiece a parpadear, seleccionar el
. Para
.
hasta que CTCSS / DCS*** empiece a parpadear, seleccionar
sando la tecla .
hasta que SL***empiece a parpadear, seleccionar el nivel
.
hasta que Vo*** empiece a parpadear, seleccionar VOX
y confirmar pulsando la tecla .
hasta que dc*** empiece a parpadear, seleccionar el nmero de
.
hasta que bP*** empiece a parpadear, seleccionar
.
hasta que bc*** empiece a parpadear, seleccionar
.
hasta que Po*** empiece a parpadear, seleccionar la
y confirmar pulsando la tecla .
hasta que RG*** empiece a parpadear, seleccionar Tono
y confirmar pulsando la tecla .
parpadear, seleccionar Luz de
y confirmar pulsando la tecla .
hasta que rS*** empiece a parpadear, seleccionar
y confirmar pulsando la tecla
eleccionar (2) para borrar todos
el nmero de canal seleccionado y CTCSS/DCS. Se recomienda no usar esta
automticamente el volumen en el
el usuario segn el valor ms bajo)
-
1.1
CP228 SMART
.
1.2
53CTCSS 104 DCS
(116)
S.Q. 5
(Voice Operated Transmission, VOX )
Dual Watch ( DW )
0.5Watt
3.7V 1100mAh
.
.
RSSIReceiving signal strength indication,
.
H:L
, .
-
1.3
CB28
CWC18 (S) , Micro-USB
1.4
/
CS28 (4 )
1. K
OR
EA
N
-
/Mic.Cap
2.
PTT
KO
RE
AN
LCD
USB
LCD
-
2.
RF ( H/L )
Vox
CTCSS/DCS
CTCSS DCS BCLO
RSSI
KO
RE
AN
-
3.1
1. USB USB
AC
2. AC
3. 3 - 3.5
1. USB USB
USB
2. 3 - 3.5
1. AC
2.
2 2.5
3.2
1. USB
2.
4.1
2 Menu
10
3.
4.
VOL SET STEP 1-16
CH SET TONE SET
DW SET BEEP SET
BLIGHT SET ROG SET
CH 1-20 CTCSS / DCS EDIT
OFF / CH OFF / ON
OFF / 1-3 OFF / ON
KO
RE
AN
USB USB
.
.
.
USB USB
.
.
.
.
.
"FULL"
.
Menu ,
.
SQL SET VOX SET
POWER SET BCLO SET
SQL 1-5 OFF / LOW / HI
RESET SET
OFF / 1-2
HI / LOW OFF / ON
.
.
-
CH
.
CTCSS/DCS ( CTCSS 1
SL001 ....................................................
Uo off ........................................
dc off .........................................
bP on ........................................
bc on ..........................................
Po Hi ...................................................
Rgoff ..........................................
bL on ..........................................
rS off ..........................................
6.1 /
,
6.2
6.3
6.4
6.5
6.6
6.7
5.
6.
.
,
CTC off ,
CTCSS/DCS ( CTCSS 1 53, DCS 1 104 ) .
Yes No
.
....................................................
........................................
.........................................
........................................
................................
...................................................
..........................................
..........................................
..........................................
.
(16 , 8)
5cm
.
.
ON / OFF
ON / OFF
ON / OFF
VOX
,
/
.
.
.
.
.
KO
RE
AN
-
6.8
** CH
6.9 CTCSS / DCS
CTCSS / DCS***
CTCSS /DCS
6.10
SL***
6.11VOX,
Vo***
VOX Hi/Low/OFF
6.12DW,
dc***
6.13
bP***
6.14BCLO
bc***
6.15
Po***
Hi/Low
6.16
RG***
oFF/1-3
6.17
bL***
on/oFF
6.18
rS***
oFF/1 2
(2) .
.
6.19 -
6.
KO
RE
AN
.
.
,
. .
,
.
,
.
.
.
.
.
.
.
CTCSS/DCS
(
) ).
.
DW
on/oFF
on/oFF
(1)
-
Features & Specifications are subject to change without notice
General
Battery type Li-Polymer
Battery capacity 1100mAh
Stand by time 15hours
Stand by time+back light 12hours
Temperature range 20-+55
Frequency stability 2.5ppm
Size (HxWxD) 88x47x21mm
Weight Incl. battery 100g
Sub tones CTCSS/DCS
CP228A Ausralia Frequency range 476.425 477.4125 MHz
Channels 80 CHs
CP228B British
Malaysia Singapore
Frequency range 446.00625 446.09375MHz
Channels 8 CHs
CP228C China Frequency range 409.7500 409.9875MHz
Channels 20 CHs
CP228E E U Frequency range
446.00625446.09375MHz 433.07500434.77500MHz
Channels 8 CHs
CP228H Hong Kong,
Macau
Frequency range 409.7500 409.9875MHz
Channels 20 CHs
CP228J Japan
Frequency range 422.05 422.30 MHz
Channels 20 CHs
Frequency range Tx 440.025 440.3625 MHz Rx 421.575 421.9125 MHz
Channels 27 CHs
CP228K Korea Frequency range 448.750 449.2625MHz
Channels 25 CHs
CP228T Taiwan Frequency range 467.5125 467.6750MHz
Channels 14 CHs
CP228R Russia
Frequency range 433.07500434.77500MHz
Channels 69 CHs
Frequency range 446.00625446.09375MHz
Channels 8 CHs
CP228U USA Frequency range 462.5500 467.7125MHz
Channels 22 CHs
TECHNICAL SPECIFICATIONS
-
CTCSS
DCS
CH Frequency CH Frequency CH Frequency CH Frequency
1 67.0 14 107.2 27 167.9 40 159.8
2 71.9 15 110.9 28 173.8 41 183.5
3 74.4 16 114.8 29 179.9 42 189.9
4 77.0 17 118.8 30 186.2 43 196.6
5 79.7 18 123.0 31 192.8 44 199.5
6 82.5 19 127.3 32 203.5 45 206.5
7 85.4 20 131.8 33 210.7 46 229.1
8 88.5 21 136.5 34 218.1 47 254.1
9 91.5 22 141.3 35 225.7 48 165.5
10 94.8 23 146.2 36 233.6 49 171.3
11 97.4 24 151.4 37 241.8 50 177.3
12 100.0 25 156.7 38 250.3 51 60.7
13 103.5 26 162.2 39 69.3 52 62.5
53 64.7
CH DCS Code CH DCS Code CH DCS Code CH DCS Code
1 023 28 172 55 431 82 743
2 025 29 174 56 432 83 754
3 026 30 205 57 445 84 036
4 031 31 223 58 464 85 053
5 032 32 226 59 465 86 122
6 043 33 243 60 466 87 145
7 047 34 244 61 503 88 212
8 051 35 245 62 506 89 225
9 054 36 251 63 516 90 246
10 065 37 261 64 532 91 252
11 071 38 263 65 546 92 255
12 072 39 265 66 565 93 266
13 073 40 271 67 606 94 274
14 074 41 306 68 612 95 325
15 114 42 311 69 624 96 332
16 115 43 315 70 627 97 356
17 116 44 331 71 631 98 446
18 125 45 343 72 632 99 452
19 131 46 346 73 654 100 454
20 132 47 351 74 662 101 455
21 134 48 364 75 664 102 462
22 143 49 365 76 703 103 523
23 152 50 371 77 712 104 526
24 155 51 411 78 723
25 156 52 412 79 731
26 162 53 413 80 732
27 165 54 423 81 734
-
WARRANTY
CPS Telecom will give 12 months warranty against failure made by the manufacturer from the
date of purchase. The warranty will not cover damage made by the user, the user opening the
equipment, moist, dirt, heat or cold. The warranty will not cover lightning/overvoltage.
Please contact your dealer if a problem with the equipment arises.
WASTE DISPOSAL
Electrical and electronic products can contain materials, parts and units that can be dangerous
for the environment and human health. Products marked with the WEEEmark (shown below),
shall not be disposed together with your normal household waste. Please
inform yourself about the local rules and disposal collection system for
electrical and electronic products. The correct disposal of your old product
will help to prevent negative consequences for the environment and
human health.
(WEEE = Waste of Electrical & Electronic Equipment).
EU DECLARATION OF CONFORMITY
We, CPS Telecom Limited ( 15B/F., 55 King Yip Street, Kowloon, Hong Kong ) hereby declare
that CP228 satisfies all the technical regulations applicable to the product within the
scope of Council Directives 2014/53/EU :
Product Description :
Model Number :
Brand :
Hardware Version :
Software Version :
Power Adaptor :
Applicable Standards :
Safety : EN 60950:2006-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN60566:2013/AC:2014, EN62209-1:2006, EN62209-2:2010
IEC62209-1:2005, IEC62209-2:2010
EMC : Draft ETSI EN 301 489-1 / -5
Radio : ETSI EN 300 296 v2.1.1(2016-03)
CPS Telecom Limited
www.cps-telecom.com
Walkie Talkie CP228
CPS
V2.2
V60E
K-T50501000E1
-
http:// www.cps-telecom.com
is the registered trademark of CPS Telecom Limited, Hong Kong
2017 CPS Telecom Limited CPS2017010228V.1.2