user guide of drivers installation and settings of modem

7/31/2019 User Guide of Drivers Installation and Settings of Modem

1/14


2/14

Qingdao Haier Telecom Co. Ltd. D1200P modem settings User Guide

Figure 24. Click the Install button to install the USB driver.

Figure 35. The USB Installation Status Message dialog box will then appear indicating what

percentage of the file copying task is complete.

2


3/14


Figure 4The Windows Hardware Installation Wizard will notify you for three times that the softwarepackage has not passed Windows Logo testing to verify its compatibility with Windows XPas illustrated by the dialog box shown in Figure 5.

Click the Continue Anyway button, indicating that you wish to continue with the softwarepackage installation process.

Figure 5

6. The following dialog indicates that the USB driver has successfully installed, click theFinish button to exit the wizard.

3


4/14


Figure 6Upon successful completion of the installation process, the following files will be located inthe specified directories folders:

C:\Program Files\VIA Telecom\VIA USB Driver\ViaUsbEts:ViaTelecomFile.catViaUsbEts.inf

ViaUsbEts.sysC:\Program Files\VIA Telecom\VIA USB Driver\ViaUsbHub:

ViaTelecomFile.catViaUsbHub.inf

C:\Program Files\VIA Telecom\VIA USB Driver\ViaUsbModem:ViaTelecomFile.catViaUsbModem.inf

ViaUsbModem.sys

2. USB device identification

1. Connect the PC and the phone using the USB cable that we supplied to trigger the Plug-N-Play mechanism to complete the discovery, installation, and registration of the USBdevice driver components into the Windows Operation System.The following device manager dialog will appear, indicating each USB device as it isdiscovered. You need only follow the instructions outlined in these dialog and message

4


5/14


boxes as they appear to complete this part of the installation process.

Figure 7The message box illustrated in Figure 7 will only appear for a very short period of time,followed by the Windows Hardware Installation Wizards Device-Found Notification of theVIA Telecom USB HUB, as seen in Figure 8.Click the Continue Anyway button, indicating that you wish to continue with theinstallation of the VIA Telecom USB HUB device.

Figure 8Next the USB Plug-N-Play process will discover and attempt to install the USB Modemdevice as indicated by the following message boxes (Figure 9).Click the Continue Anyway button, indicating that you wish to continue with theinstallation of the VIA Telecom USB Modem device.

5


6/14


Figure 9 At this point, the USB Plug-N-Play process will discover and attempt to install the USB ETSdevice as indicated by the following message boxes (Figure 10).Click the Continue Anyway button, the installation of the VIA Telecom USB ETS device

will occur automatically.

Figure 10

6


7/14


The USB device installation will then complete by the following message box (Figure 11).

Figure 112. An examination of the Windows Device Managers device list (as seen Figure 12) willevidence the successful installation of the USB devices, namely:

VIA Telecom USB ModemVIA Telecom USB ETSVIA Telecom USB HUB

Figure 12

3. Modem settings

Your D1200P contains a complete CDMA modem, so you can use it to connect your PC to

7


8/14


the internet.The following wizard will help you configure dial-up networking entries on your PC.

Parameter Setting Data Call Smart TelecomUser Name smartPassword smartDial Up Number #777

3.1 Modem configuration

1. Connect the PC and the handset using the cable that we supplied.2. From windows system menu Start ->Programs ->Accessories ->Communications->New Connection Wizard, as seen Figure 13.

Figure 133. Click the Next button.

Figure 14

8


9/14


4. Select the Connect to the Internet option, click the Next button.

Figure 155. Select the Set up my connection manually option, click the Next button.

Figure 16

6. Select the Connect using a dial-up modem option, click the Next button.

9


10/14


Figure 177. Type the ISP Name: SMART, click the Next button.

Figure 188. Type the ISPs phone number: #777, click the Next button.

10


11/14


Figure 199. Type the ISP account name: smart, password: smart, click the Next button.

Figure 2010. Click the Finish button, completing the new connection wizard.

11


12/14


Figure 21

3.2 Dial-up to the network

1. From windows system menu Start ->Settings ->Network Connections ->SMART,

as seen Figure 22

Figure 222. Click the Dial button to dial-up network, as seen Figure 23.(User name: smart; Password: smart; Dial-up number: #777)

12


13/14


Figure 233. The following dialog boxes will appear, indicating dialing, verifying username and

password, registering process (Figure 24, Figure 25, Figure 26, Figure 27).

Figure 24

Figure 25

13


14/14


Figure 26

Figure 274. To disconnect the dial-up networking, select the SMART connection icon in the statusbar. Select Disconnect from the pop-up dialog.

Figure 28

14

user guide of drivers installation and settings of modem

Documents