User Guide for DS150E withWin7 - Auto Mart DS150E WIN7 User guide V1.0.pdf · Delphi PSS 1 User Guide for DS150E withWin7. Dangerfield January. 2010 V1.0 Delphi PSS 2 ... The Delphi
128
Dangerfield January. 2010 V1.0 Delphi PSS 1 User Guide for DS150E with Win7
Print and Save…………………………...69 Non-continuous Tests (EOBD)…………..119
Real Time Data (OBD)…………………..76 Control of System (EOBD)………………..122
Adjust Parameters………………………83 Vehicle Information (EOBD)……………...125
Dangerfield January. 2010 V1.0
Delphi PSS 3
MAIN COMPONENTS
Dangerfield January. 2010 V1.0
Delphi PSS 4
Main Components
Vehicle Communication Interface (V.C.I.)
Bluetooth dongle
Dangerfield January. 2010 V1.0
Delphi PSS 5
INSTALLATION INSTRUCTIONS
Dangerfield January. 2010 V1.0
Delphi PSS 6
Laptop/Tablet Specification
• Recommended:• Windows 2000/(XP¹) Win7• Pentium 800 MHz, or similar• USB (optional Bluetooth)• 256 MB internal memory• 250 MB hard disk space (program size)• Resolution: 1024x768, High Colour (16 bits)
(XP¹) Service Pack 2 or later
Dangerfield January. 2010 V1.0
Delphi PSS 7
Introduction: The Rel. 3 software Installation CD1 will load the DS150E diagnostics software.The Belkin Bluetooth software installs from a separate CD
Instructions: Insert the Delphi Installation CD into the CD Rom drive. Select Start >> RUN and browse for the DS150E.exe file from the CD inserted
and select OK.
DS150E Installation Instructions 1
Click OK and the DS150E install will start. Follow the online screen instructions to install the software
Dangerfield January. 2010 V1.0
Delphi PSS 8
DS150E Installation Instructions 2
Select language required
Dangerfield January. 2010 V1.0
Delphi PSS 9
DS150E Installation Instructions 3
View system requirements, tick box, then click next
Dangerfield January. 2010 V1.0
Delphi PSS 10
DS150E Installation Instructions 4
MissingSelect product, select country,
click Next
Dangerfield January. 2010 V1.0
Delphi PSS 11
DS150E Installation Instructions 5
Dangerfield January. 2010 V1.0
Delphi PSS 12
DS150E Installation Instructions 6
Choose location, click install
Dangerfield January. 2010 V1.0
Delphi PSS 13
DS150E Installation Instructions 7
Drivers must be installed, click O.K.
Dangerfield January. 2010 V1.0
Delphi PSS 14
DS150E Installation Instructions 8
Select “Install this driver software anyway”, click next
Dangerfield January. 2010 V1.0
Delphi PSS 15
DS150E Installation Instructions 9
When Installation is complete click next
Dangerfield January. 2010 V1.0
Delphi PSS 16
DS150E Installation Instructions 10
Dangerfield January. 2010 V1.0
Delphi PSS 17
BLUETOOTH INSTALLATION
Dangerfield January. 2010 V1.0
Delphi PSS 18
Bluetooth Installation 1
Insert Belkin installation CD into CD drive
Click on Run BelkinBluetooth.exe
DO NOT insert Belkin Dongle until asked to do so
ATTENTION! If your computer has a Bluetooth facility, please disable it by referring to your hardware manufacturers manual, before
installing the Belkin software.The Delphi software is only verified to work with the dongle supplied.
Dangerfield January. 2010 V1.0
Delphi PSS 19
Bluetooth Installation 2
Click “Install Software” and then click next
Dangerfield January. 2010 V1.0
Delphi PSS 20
Bluetooth Installation 3
If your computer has a previous version of Widcomm software installed, this box will appear, click O.K.
Dangerfield January. 2010 V1.0
Delphi PSS 21
Bluetooth Installation 4
Dangerfield January. 2010 V1.0
Delphi PSS 22
Bluetooth Installation 5
Insert Belkin Dongle into USB port at this point, then click “next”
Dangerfield January. 2010 V1.0
Delphi PSS 23
Bluetooth Installation 6
Dangerfield January. 2010 V1.0
Delphi PSS 24
Bluetooth Installation 7
Dangerfield January. 2010 V1.0
Delphi PSS 25
Bluetooth Installation 8
Click to accept terms, then click “next”
Dangerfield January. 2010 V1.0
Delphi PSS 26
Bluetooth Installation 9
Dangerfield January. 2010 V1.0
Delphi PSS 27
Bluetooth Installation 10
Dangerfield January. 2010 V1.0
Delphi PSS 28
Bluetooth Installation 11
When complete click next
Dangerfield January. 2010 V1.0
Delphi PSS 29
Bluetooth Installation 12
Dangerfield January. 2010 V1.0
Delphi PSS 30
CONFIGURING BLUETOOTH
Dangerfield January. 2010 V1.0
Delphi PSS 31
Configuring the Bluetooth 1
Configuring the BluetoothThe Bluetooth dongle needs to be setup and the DS150E hardware needs to be paired with the Bluetooth dongle, click the arrow icon to open the box, then click the Bluetooth icon.
Dangerfield January. 2010 V1.0
Delphi PSS 32
Configuring the Bluetooth 2
Click “Open Settings”
Dangerfield January. 2010 V1.0
Delphi PSS 33
Configuring the Bluetooth 3
UNTICK this box
Click options
Dangerfield January. 2010 V1.0
Delphi PSS 34
Configuring the Bluetooth 4
Click “add a device”
Dangerfield January. 2010 V1.0
Delphi PSS 35
Configuring the Bluetooth 5Dongle will search all devices in range NOTE if device has already been loaded it will NOT be displayed below
Select Delphi device, click “next”
Dangerfield January. 2010 V1.0
Delphi PSS 36
Configuring the Bluetooth 6
Click “Enter the device’s pairing code”,then click”next”
Dangerfield January. 2010 V1.0
Delphi PSS 37
Configuring the Bluetooth 7
Enter 0, then click next
Dangerfield January. 2010 V1.0
Delphi PSS 38
Configuring the Bluetooth 8
To verify comport click on “Devices and Printers
Dangerfield January. 2010 V1.0
Delphi PSS 39
Configuring the Bluetooth 9
Select hardware
Note comport
Dangerfield January. 2010 V1.0
Delphi PSS 40
Configuring the Bluetooth 10
1 Click on toolbox icon
2 Click on gearwheel icon
Open Delphi DS150E software, click on settings, then hardware setup
Select Automatic then click Search Icon, if automatic search fails select “manually”
Dangerfield January. 2010 V1.0
Delphi PSS 41
Configuring the Bluetooth 11Ensure that com port is identical to the port quoted in page 39, if not select the correct port from the drop down menu.Bluetooth configuration is then complete.Click “OK”, or update to update firmware .
Dangerfield January. 2010 V1.0
Delphi PSS 42
DIAGNOSTIC PROGRAM
Dangerfield January. 2010 V1.0
Delphi PSS 43
Main Diagnostic screen
Dangerfield January. 2010 V1.0
Delphi PSS 44
FILE
Dangerfield January. 2010 V1.0
Delphi PSS 45
Opens any saved documents in report folder
Dangerfield January. 2010 V1.0
Delphi PSS 46
SETTINGS
Dangerfield January. 2010 V1.0
Delphi PSS 47
Alternative access to Language and Hardware set up
Dangerfield January. 2010 V1.0
Delphi PSS 48
Alternative access to Workshop and Hardware set up
Dangerfield January. 2010 V1.0
Delphi PSS 49
Alternative access to Workshop and Language set up
Click search to find VCI
Dangerfield January. 2010 V1.0
Delphi PSS 50
Dangerfield January. 2010 V1.0
Delphi PSS 51
A successful connection will result
in the comport number, serial number of the VCI
and firmware version being displayed
Dangerfield January. 2010 V1.0
Delphi PSS 52
After connection for the first time the firmware
should be updated, follow the on-screen
instructions
Dangerfield January. 2010 V1.0
Delphi PSS 53
When completed click O.K.
Dangerfield January. 2010 V1.0
Delphi PSS 54
DOCUMENTS
Dangerfield January. 2010 V1.0
Delphi PSS 55
Connects to application file
Opens notepad
Shows release news
Specifies Computer system requirements
Dangerfield January. 2010 V1.0
Delphi PSS 56
HELP
Dangerfield January. 2010 V1.0
Delphi PSS 57
Sets hardware to demo mode
Opens hardware key box
Dangerfield January. 2010 V1.0
Delphi PSS 58
Dangerfield January. 2010 V1.0
Delphi PSS 59
OBD COMMUNICATION
Dangerfield January. 2010 V1.0
Delphi PSS 60
Select Brand, Model and model year
Dangerfield January. 2010 V1.0
Delphi PSS 61
Select type of system and engine code
Dangerfield January. 2010 V1.0
Delphi PSS 62
Select Gearbox option then click OBD engine icon
Dangerfield January. 2010 V1.0
Delphi PSS 63
Dangerfield January. 2010 V1.0
Delphi PSS 64
Read Fault Codes
Dangerfield January. 2010 V1.0
Delphi PSS 65
Dangerfield January. 2010 V1.0
Delphi PSS 66
Erase fault codes
Dangerfield January. 2010 V1.0
Delphi PSS 67
Dangerfield January. 2010 V1.0
Delphi PSS 68
Return to main screen or select another option
Dangerfield January. 2010 V1.0
Delphi PSS 69
PRINT AND SAVE
Dangerfield January. 2010 V1.0
Delphi PSS 70
Click print /save icon
Dangerfield January. 2010 V1.0
Delphi PSS 71
Add any information required
Click print icon
Dangerfield January. 2010 V1.0
Delphi PSS 72
Select printer
Click Print
Dangerfield January. 2010 V1.0
Delphi PSS 73
To save information click save icon
Dangerfield January. 2010 V1.0
Delphi PSS 74
Add title
Click save
Dangerfield January. 2010 V1.0
Delphi PSS 75
Return to main screen
Print and save function
Dangerfield January. 2010 V1.0
Delphi PSS 76
REAL TIME DATA
Dangerfield January. 2010 V1.0
Delphi PSS 77
Real Time Data
Dangerfield January. 2010 V1.0
Delphi PSS 78
Screen Navigation
List Mode
Dangerfield January. 2010 V1.0
Delphi PSS 79
Graph Mode
Dangerfield January. 2010 V1.0
Delphi PSS 80
Return to list mode
Use scroll bar to view all items on data list
Dangerfield January. 2010 V1.0
Delphi PSS 81
Custom data list
Dangerfield January. 2010 V1.0
Delphi PSS 82
Select item, click arrow to transfer to selected list