user guide · 2) proceed to “peel” cover away from ipad. 3) take ipad out. 4) take ipad out...

1
Congratulations! Thank you for choosing our iPad 11 inch keyboard case. Before using it, please read this manual. 1. iPad 11 inch Keyboard Case 2. User Manual iPad Pro 11 inch Keyboard case 2018 (Model Number: A1980 /A2013/ A1934) Fit for: Note: Please note that our keyboard must be charged with your ipad Pro 11 inch charging cable. Contact us: email: [email protected] website: www.greenlawus.com (Not via Amazon) battery capacity 500mah charging time 2 hours 8 hours continuous using time when the backlit is on 200 days Stand by time Working distance 33 feet (10 meters) Operating Current <5 MA 3.7 V DC Operating Voltage Standby Current 1.0 MA Dimensions 9. 7x7x0.6 inches 2 hours Charging time 60 hours continuous using time when the backlit is off Greenlaw Keyboard Case USER GUIDE Get Start Trouble shooting Installation and removal Specifications How to get the keyboard sync with iPad LED indicator Charging Package Contents Function key description 360 °Rotate There are several reasons that can cause this problem: 1. there's a 'KEY REPEAT' in the ipad settings (settings- general-key repeat-off) 2. didn't choose the right language 3. Wireless connection is unstable (maybe caused by lack of power) 4. If you do not press any key for a long time, the keyboard will enter sleep mode and the first key you press will wake up it. Step 1: Make sure your iPad is fully charged Step 2: Delete the keyboard connection on iPad (suggest to update iPad system to latest version) Charging light (Red LED on: Charging); Battery light (Green LED on: Full battery charge, RED LED blinking: Low battery) Step 3: Reboot your iPad and keyboard Step 4: Reconnect it again In your iPad, there are some smart settings and it impacts to the typing experience and sensitivity of the typing, it sometimes cause the keyboard too sensitive and easily to mistype, you could toggle off the settings in Keyboard(Auto-Correction, Enable Caps Lock, Shortcuts, Smart Punctuation, Split, Key repeat...) Any question please email us at once. Email: [email protected] 1) Removing back protective piece: hold iPad on both sides and use thumbs to gently push off the back cover (see photo.) Cover is held in place by two tabs. 2) Proceed to “peel” cover away from iPad. 3) Take iPad out. 4) Take iPad out upwards. or Find out an expired card Insert the card into the gap and push the card to the cover side a little bit Slid the card from one side to another Separate the iPad from the cover easily 1. Power on the keyboard by sliding the On/Off to On position. Then press ‘fn’ and ‘c’ button together, the blue led light flash, the B-tooth of the keyboard is opened. 2.Turn on the B-tooth of your iPad. 3.Open the iPad B-tooth Search when the B-tooh pair lights twinkling. 4.Then there will be "B-tooth Keyboard" comes up in the searching page. Just select it. If still can not connect, please contact us by e-mail, we will try our best to solve it. Blue LED, will flash when searching paring device, will be extinguished after successful pairing. Red LED will always be on when charging, and will be off when full of charge. Green LED will flash when it is powered off, and it will always be on when it is fully charged. When you turn on the keyboard, the green and blue LED will shine about 3 seconds. 1. Please charge the keyboard with your iPad's charging cable. 2.Fully charge your keyboard, or charge it for more than 3 hours, before you use it for the first time. The keyboard charging port is TYPE C, the input voltage can not exceed DC-5V, the keyboard will be broken if the voltage exceed the limit. The keys types lagging and need press hard to have the letters, sometimes get doubleletters and double spaces. email: [email protected] website: www.greenlawus.com My keyboard is too sensitive and always mistype. When the battery is below 20%, the connection will be unstable. And the wireless function will turn to sleep if you don't press the keyboard beyond 10 minutes, at this situation, you just need to press any key on the keyboard to wake up the wireless get it to work again. (Don't need to re-connect the iPad) Why is the Wireless connection unstable? Please try to turn OFF the keyboard; delete the Wireless keyboard from search result list on your smart phone/ tablet. Then follow the pairing instructions and try to connect again. I can see the keyboard listed after searching wireless devices, but it says connection failed. red LED does not light after connecting the charging cable: Replace the charging cable and replace the USB power adapter red LED is always on but can't turn on the keyboard/ the red LED of the charging indicator is always on, it can be used normally. After the charging cable is unplugged, it cannot be used: Charge the keyboard for at least 60 minutes, then try again. Can't charge. Blue LED, will flash when searching paring device, will be extinguished after successful pairing. Red LED will always be on when charging, and will be off when full of charge. Green LED shining when it is powered off, and it will always be on when it is fully charged. What does the LED indicator mean? Keyboard features Main screen/Esc Search PrevTrack Play/pause NextTrack Mute Volume - Volume + Lock screen Brightness- Brightness+ Copy Virtual Keyboard Paste = = = = = = = = = = = = = = : the first page : the first line : turn on the B-tooth paring mode : adjust 10 tricolor backlight (mix color) : turn on/off the backlight breathing mode : change the lightness of backlight color 1. No button is pressed within 1 minute, the backlight will go out automatically. 2. Not button is pressed within 10 minutes, the keyboard will be sleep to save power mode. 3. The backlight function will be turned off automatically with low battery. 4. Breathing adjustment is not supported when the breathing mode is turned on, and then press will exit the breathing mode and convert to normal low brightness backlight mode, you can press to adjust the brightness of the backlit. : adjust 7 backlit's color (pure color) + + + + : the last page + + + / / : the last line + + 180 ° 180 °Flip

Upload: others

Post on 14-Jul-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: USER GUIDE · 2) Proceed to “peel” cover away from iPad. 3) Take iPad out. 4) Take iPad out upwards. or Find out an expired card Insert the card into the gap and push the card

Congratulations! Thank you for choosing our iPad 11 inch keyboard case. Before using it, please read this manual.

1. iPad 11 inch Keyboard Case2. User Manual

iPad Pro 11 inch Keyboard case 2018 (Model Number: A1980 /A2013/ A1934)

Fit for:

Note: Please note that our keyboard must be charged with your ipad Pro 11 inch charging cable.

Contact us: email: [email protected]

website: www.greenlawus.com(Not via Amazon)

battery capacity 500mah

charging time 2 hours

8 hours continuous using time when the backlit is on

200 daysStand by time

Working distance 33 feet (10 meters)

Operating Current <5 MA

3.7 V DCOperating Voltage

Standby Current 1.0 MA

Dimensions 9. 7x7x0.6 inches

2 hoursCharging time

60 hours continuous using time when the backlit is off

Greenlaw Keyboard Case

USER GUIDE Get Start

Trouble shooting

Installation and removal

Specifications

How to get the keyboard sync with iPad

LED indicator

Charging

Package Contents

Function key description

360 °Rotate

There are several reasons that can cause this problem:

1. there's a 'KEY REPEAT' in the ipad settings (settings- general-key repeat-off )

2. didn't choose the right language

3. Wireless connection is unstable (maybe caused by lack of power)

4. If you do not press any key for a long time, the keyboard will enter sleep mode and

the first key you press will wake up it.

Step 1: Make sure your iPad is fully charged

Step 2: Delete the keyboard connection on iPad (suggest to update iPad system to

latest version) Charging light (Red LED on: Charging); Battery light (Green

LED on: Full battery charge, RED LED blinking: Low battery)

Step 3: Reboot your iPad and keyboard

Step 4: Reconnect it again

In your iPad, there are some smart settings and it impacts to the typing experience and

sensitivity of the typing, it sometimes cause the keyboard too sensitive and easily to

mistype, you could toggle off the settings in Keyboard(Auto-Correction, Enable Caps

Lock, Shortcuts, Smart Punctuation, Split, Key repeat...)

Any question please email us at once.

Email: [email protected]

1) Removing back protective piece: hold iPad on both sides and use

thumbs to gently push off the back cover (see photo.) Cover is held

in place by two tabs.

2) Proceed to “peel” cover away from iPad.

3) Take iPad out.

4) Take iPad out upwards.

or

Find out an expired card

Insert the card into the gap and push the card to the cover side a little bit

Slid the card from one side to another

Separate the iPad from the cover easily

1. Power on the keyboard by sliding the On/Off to On position.

Then press ‘fn’ and ‘c’ button together, the blue led light flash,

the B-tooth of the keyboard is opened.

2.Turn on the B-tooth of your iPad.

3.Open the iPad B-tooth Search when the B-tooh pair lights twinkling.

4.Then there will be "B-tooth Keyboard" comes up in the searching page.

Just select it.

If still can not connect, please contact us by e-mail, we will try our best

to solve it.

Blue LED, will flash when searching paring device, will be extinguished

after successful pairing.

Red LED will always be on when charging, and will be off when full of charge.

Green LED will flash when it is powered off, and it will always be on when it

is fully charged.

When you turn on the keyboard, the green and blue LED will shine

about 3 seconds.

1. Please charge the keyboard with your iPad's charging cable.

2.Fully charge your keyboard, or charge it for more than 3 hours, before

you use it for the first time.

The keyboard charging port is TYPE C, the input voltage can not exceed

DC-5V, the keyboard will be broken if the voltage exceed the limit.

The keys types lagging and need press hard to have the letters, sometimes get doubleletters and double spaces.

email: [email protected]

website: www.greenlawus.com

My keyboard is too sensitive and always mistype.When the battery is below 20%, the connection will be unstable. And the wireless

function will turn to sleep if you don't press the keyboard beyond 10 minutes, at this

situation, you just need to press any key on the keyboard to wake up the wireless

get it to work again. (Don't need to re-connect the iPad)

Why is the Wireless connection unstable?

Please try to turn OFF the keyboard; delete the Wireless keyboard from search

result list on your smart phone/ tablet. Then follow the pairing instructions and try

to connect again.

I can see the keyboard listed after searching wireless devices, but it says connection failed.

red LED does not light after connecting the charging cable: Replace the charging

cable and replace the USB power adapter red LED is always on but can't turn on

the keyboard/ the red LED of the charging indicator is always on, it can be used

normally. After the charging cable is unplugged, it cannot be used: Charge the

keyboard for at least 60 minutes, then try again.

Can't charge.

Blue LED, will flash when searching paring device, will be extinguished after

successful pairing.

Red LED will always be on when charging, and will be off when full of charge.

Green LED shining when it is powered off, and it will always be on when it is

fully charged.

What does the LED indicator mean?

Keyboard features

Main screen/Esc

Search

PrevTrack Play/pause

NextTrack Mute Volume -

Volume + Lock screen

Brightness- Brightness+

CopyVirtual Keyboard

Paste

=

=

=

=

=

=

=

=

=

=

=

=

=

=

: the first page

: the first line

: turn on the B-tooth paring mode

: adjust 10 tricolor backlight (mix color)

: turn on/off the backlight breathing mode

: change the lightness of backlight color

1. No button is pressed within 1 minute, the backlight will go out automatically.

2. Not button is pressed within 10 minutes, the keyboard will be sleep to save

power mode.

3. The backlight function will be turned off automatically with low battery.

4. Breathing adjustment is not supported when the breathing mode is turned

on, and then press will exit the breathing mode and convert to normal

low brightness backlight mode, you can press to adjust the brightness

of the backlit.

: adjust 7 backlit's color (pure color)

+

+

+

+

: the last page+

+

+

/

/

: the last line+

+

180 °180 °Flip