usb3740 evaluation board user manualww1.microchip.com/downloads/en/devicedoc/evb3740user.pdf ·...

6
SMSC USB3740 EVB USER MANUAL Revision 1.1 (12-07-12) Copyright © 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders. The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. USB3740 Evaluation Board User Manual

Upload: others

Post on 30-Jan-2020

14 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: USB3740 Evaluation Board User Manualww1.microchip.com/downloads/en/DeviceDoc/evb3740user.pdf · 2013-12-04 · USB3740 Evaluation Board User Manual SMSC USB3740 EVB 3 Revision 1.1

USB3740 Evaluation Board User Manual

Copyright © 2012 SMSC or its subsidiaries. All rights reserved.

Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete informationsufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumedfor inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales officeto obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductordevices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the termsand conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement").The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomalysheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where productfailure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and furthertesting and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may beobtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”). Product names andcompany names are the trademarks of their respective holders.

The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIESARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT,SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THEFORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OROTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SMSC USB3740 EVB USER MANUAL Revision 1.1 (12-07-12)

Page 2: USB3740 Evaluation Board User Manualww1.microchip.com/downloads/en/DeviceDoc/evb3740user.pdf · 2013-12-04 · USB3740 Evaluation Board User Manual SMSC USB3740 EVB 3 Revision 1.1

USB3740 Evaluation Board User Manual

1 Introduction

The USB3740 EVB demonstrates the capabilities of the USB3740. The board consists of the upstreamand downstream ports, manual switches to control the OE_N and S pins, and a second USB3740 thatcan be evaluated with SMA connectors instead of USB (SMA connectors not installed).

2 Hardware

2.1 USB Ports

The USB ports are mounted on the edges of the USB3740 EVB. The downstream ports use thestandard USB Type A receptacle. The label for the port is located next to the receptacle. The upstreamport can be a standard USB Type B, mini-B or micro-B receptacle, the default connector is a USB mini-B connector.

2.2 Test Points and Resistors

The USB3740 EVB provides access to the OE_N, S, VDD and GND pins. TP2 connects to GND, TP1connects to the VDD pin. R1 (On the back of the PCB) connects the upstream VBUS to the VDD ofthe USB3740. R2 and R3 connect the upstream VBUS to the VBUS pins of the dowstream ports. SW1and SW2 control the operation of the switch. SW1 controls the Output Enable (OE_N) pin. To enablethe switch, OE_N should be set to 0. SW2 selects which downstream port is connected to the upstreamport.

Figure 2.1 Upstream and Downstream Ports

Upstream

Downstream1 Downstream2

SMSC USB3740 EVB 2 Revision 1.1 (12-07-12)USER MANUAL

Page 3: USB3740 Evaluation Board User Manualww1.microchip.com/downloads/en/DeviceDoc/evb3740user.pdf · 2013-12-04 · USB3740 Evaluation Board User Manual SMSC USB3740 EVB 3 Revision 1.1

USB3740 Evaluation Board User Manual

2.3 SMA Evaluation (Not Installed)

The USB3740 EVB also contains a section to evaluate the USB3740 without the standard USBconnectors. Because the switch can be used in many different applications, a second USB3740 isplaced on the board with the pins routed out to right angle SMA connectors. The connectors are notpopulated by default. R5 is used to supply VDD to the second USB3740.

Figure 2.2 Test points, Resistors and Switches

Figure 2.3 USB3740 EVB with the SMAs populated

TP2

TP2SW1 SW2

R3

R2

R5

SMSC USB3740 EVB 3 Revision 1.1 (12-07-12)USER MANUAL

Page 4: USB3740 Evaluation Board User Manualww1.microchip.com/downloads/en/DeviceDoc/evb3740user.pdf · 2013-12-04 · USB3740 Evaluation Board User Manual SMSC USB3740 EVB 3 Revision 1.1

USB3740 Evaluation Board User Manual

3 USB3740 EVB Schematic

Figure 3.1 USB3740 EVB Schematic

5 5

4 4

3 3

2 2

1 1

DD

CC

BB

AA

USB3

740

10-p

in 0

.4m

m P

itch

QFN

Eva

luat

ion

Boar

dTh

is p

orti

on o

f th

e sc

hema

tic

show

s th

e re

quir

ed c

ompo

nent

s fo

rth

e Sw

itch

to

oper

ate

prop

erly

DN

P

DN

P

DN

P

This

por

tion

of

the

sche

mati

c is

for

test

ing

of t

he s

witc

h in

appl

icat

ions

tha

t ar

e no

t US

B

DN

PD

NP

DN

PD

NP

DN

PD

NP

DM

_2

VBU

SD

P_1

DP_

2

DP

DM

VBU

S

VDD

DM

_1

VBU

S

VDD

VDD

VDD

Title

Size

Doc

umen

t Num

ber

Rev

Dat

e:Sh

eet

of

3930

Eas

t Ray

Roa

dSu

ite 2

00Ph

oeni

x, A

rizon

a 85

044

480-

759-

0200

SCH

-724

0AZ-

A00

A

USB

3740

10-

pin

0.4m

m P

itch

QFN

Eva

luat

ion

Boar

d

B

11

Wed

nesd

ay, D

ecem

ber 0

8, 2

010

Title

Size

Doc

umen

t Num

ber

Rev

Dat

e:Sh

eet

of

3930

Eas

t Ray

Roa

dSu

ite 2

00Ph

oeni

x, A

rizon

a 85

044

480-

759-

0200

SCH

-724

0AZ-

A00

A

USB

3740

10-

pin

0.4m

m P

itch

QFN

Eva

luat

ion

Boar

d

B

11

Wed

nesd

ay, D

ecem

ber 0

8, 2

010

Title

Size

Doc

umen

t Num

ber

Rev

Dat

e:Sh

eet

of

3930

Eas

t Ray

Roa

dSu

ite 2

00Ph

oeni

x, A

rizon

a 85

044

480-

759-

0200

SCH

-724

0AZ-

A00

A

USB

3740

10-

pin

0.4m

m P

itch

QFN

Eva

luat

ion

Boar

d

B

11

Wed

nesd

ay, D

ecem

ber 0

8, 2

010

J2

1 2 3 4 5

U2

USB

3740

_4__

10D

FN

DM

_11

DP_

12

OE_

N3

S4

DM

_27

DP_

26

VDD

5

VSS

8

DM

9D

P10

J3

1 2 3 4 5

P1

USB

min

i AB

SMD

VBU

S1

D+

3D

-2

ID4

GN

D5

SHIE

LD1

6

SHIE

LD2

7

SHIE

LD3

8

SHIE

LD4

9

SW2

1

2

3

SW1

1

2

3

J4

1 2 3 4 5

J5

1 2 3 4 5

R4

ZER

O

TP2

Blac

k

R1

ZER

O

R/ANGLE USB A CON

P2

USB

-A

VCC

1

D-

2D

+3

SHLD

15

GN

D4

SHLD

26

R5

ZER

O

P5

USB

MIC

RO

-AB

VBU

S1

D-

2

D+

3

ID4

GN

D5

SHLD

16

SHLD

27

SHLD

38

SHLD

49

SHLD

510

SHLD

611

J6

1 2 3 4 5

C1

0.01

uF

TP1

R/ANGLE USB A CON

P4

USB

-A

VCC

1

D-

2D

+3

SHLD

15

GN

D4

SHLD

26

P3 USB

-B

VCC

1

D-

2D

+3

GN

D4

SHLD

15

SHLD

26

R3

ZER

O

R2

ZER

O

C3

0.01

uF

J1

1 2 3 4 5

U1

USB

3740

_4__

10D

FN

DM

_11

DP_

12

OE_

N3

S4

DM

_27

DP_

26

VDD

5

VSS

8

DM

9D

P10

C2

1.0u

F

SMSC USB3740 EVB 4 Revision 1.1 (12-07-12)USER MANUAL

Page 5: USB3740 Evaluation Board User Manualww1.microchip.com/downloads/en/DeviceDoc/evb3740user.pdf · 2013-12-04 · USB3740 Evaluation Board User Manual SMSC USB3740 EVB 3 Revision 1.1

USB3740 Evaluation Board User Manual

4 USB3740 EVB Bill of Materials

Figure 4.1 USB3740 EVB Bill of Materials

Part

Num

berQ

uant

ityPa

rt Re

fere

nce

Desc

riptio

nDi

gike

y_Nu

mbe

rM

anuf

Man

uf_P

NRo

HSDN

P1

2C1

C3

CAPA

CITO

R CE

RAM

IC 0

.01U

F 6.

3V X

5R 0

201

PCC2

136C

T-ND

PANA

SONI

CEC

J-ZE

B0J1

03K

Yes

21

C2CA

PACI

TOR

CERA

MIC

1.0

UF 5

0V Y

5V 0

805

445-

1364

-1-N

DTD

KC2

012Y

5V1H

105Z

Yes

36

J1 J2

J3 J4

J5 J6

RECE

PTAC

LE, S

MA,

END

_LAU

NCH

J658

-ND

EMER

SON

142-

0701

-851

Yes

J1 J2

J3 J4

J5 J6

41

P1CO

NNEC

TOR

RECE

PT U

SB M

INI A

B 5P

OS R

T AN

GW

M17

122C

T-ND

MOL

EX56

579-

0576

Yes

52

P2 P

4RE

CEPT

ACLE

, USB

, STY

LE A

, RIG

HT A

NGLE

609-

1045

-ND

FCI

8752

0-00

10BL

FYe

s6

1P3

RECE

PTAC

LE, U

SB, S

TYLE

B, R

IGHT

ANG

LEA3

1725

-ND

TYCO

ELE

CTRO

NICS

2923

04-1

Yes

P37

1P5

CONN

ECTO

R RE

CEPT

MIC

RO U

SB T

YPE

AB S

MT

A977

99CT

-ND

TYCO

ELE

CTRO

NICS

1981

584-

1Ye

sP5

84

R1 R

2 R3

R5

RESI

STOR

ZER

O OH

M 1

/4W

5%

120

631

1-0.

0ERC

T-ND

YAGE

ORC

1206

JR-0

70RL

Yes

91

R4RE

SIST

OR Z

ERO

OHM

1/1

0W 5

% 0

603

311-

0.0G

RCT-

NDYA

GEO

RC06

03JR

-070

RLYe

s10

2SW

1 SW

2SW

ITCH

SLI

DE S

PDT

SMD

GULL

563-

1022

-1-N

DCO

PAL

ELEC

TRON

ICS

CJS-

1200

TBYe

s11

1TP

1TE

ST P

OINT

LOO

P CO

MPA

CT R

ED50

05K-

NDKE

YSTO

NE50

05Ye

s12

1TP

2TE

ST P

OINT

LOO

P CO

MPA

CT B

LACK

5006

K-ND

KEYS

TONE

5006

Yes

131

U1US

B374

0SM

SCYe

s14

1U2

USB3

740

SMSC

Yes

SMSC USB3740 EVB 5 Revision 1.1 (12-07-12)USER MANUAL

Page 6: USB3740 Evaluation Board User Manualww1.microchip.com/downloads/en/DeviceDoc/evb3740user.pdf · 2013-12-04 · USB3740 Evaluation Board User Manual SMSC USB3740 EVB 3 Revision 1.1

USB3740 Evaluation Board User Manual

5 Revision History

Table 5.1 Customer Revision History

REVISION LEVEL & DATE SECTION/FIGURE/ENTRY CORRECTION

Rev. 1.1(12-07-12)

Modified Section 2.2, Section 2.3.

Document co-branded: Microchip logo added, modification to legal disclaimer.

Rev. 1.0(12-09-11)

Initial Release

SMSC USB3740 EVB 6 Revision 1.1 (12-07-12)USER MANUAL