u.s. july 2021 list prices

SUBMERSIBLE PUMPS AND PARTS

SUBMERSIBLE MOTORS

U.S. JULY 2021 LIST PRICESB13330BK-P • EFFECTIVE: JULY 5, 2021 • SUPERSESES ALL PREVIOUS PRICE LISTS

COMBINES B10118BK-P, B11459BK-P & B1524BK-P

TABLE OF CONTENTS

DESCRIPTION PAGE

Certified Test Charges for Submersible Pumps 2

Pump Ends Only

5TMH - 75-425 Series 3 - 4

6TMH - 140-450 Series 5 - 6

7TMH - 230-750 Series 7 - 8

8T - 950 Series 9

10TMH - 750-2250 Series 10

10T - 750-1900 Series 11 - 12

6TSP - 50-100 Series 13

6TS - 115-300 Series 14 - 15

6TS Series Kit Component Program 16

Kits & Parts

Assembly Tools - 5, 6, 7 TMH Series 17

Shared Components - 5, 6, 7 TMH Series 18 - 19

5TMH Series 20 - 21

6TMH Series 22 - 23

7TMH Series 24 - 25

10TMH Shared Components 26

10TMH Series 27

10T Series 28 - 29

Pentek XE-6 6" Submersible Motors 30 - 31

Pentek XE-6 8" Submersible Motors 32

Hitachi Submersible Motors 33 - 34

NOTE: PART NUMBERS WITH "NLA" LIST PRICE ARE NO LONGER AVAILABLE

ALL TAXES EXTRA. ALL PRICES F.O.B. FACTORY. LIST PRICES SHOWN IN U.S. DOLLARS.

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. WE RESERVE THE RIGHT TO CORRECT PRICING ERRORS.

293 Wright Street

Delavan, WI 53115

Ph: 888-237-5353

Fax: 800-321-8793 pentair.com

Certified Pump Testing

Part Number Description

CTEST01 Non-Witnessed Performance Test $1,550.00

CTEST02 Customer Witnessed Performance Test $1,850.00

CTEST03 Non-Witnessed Performance with 1 Point NPSH Test $1,800.00

CTEST04 Customer Witnessed Performance with 1 Point NPSH Test $2,100.00

CTEST05 Non-Witnessed Certified Hydrostatic Test $1,875.00

CTEST06 Witnessed Certified Hydrostatic Test $1,975.00

• Power available for testing is 230/1/60, 230/460/3/60, 600/3/60. Customer’s power requirements must

match factory’s power available. Pumps will be tested at synchronous motor speed.

Electric Motor Drive Submersible Pumps

• A copy of the pump tests will be provided to the fax number on the Customer’s Purchase Order. After

Customer has approved test results, pump will be shipped to location specified on Customer Purchase

Order within 24-48 hours from testing completion in Pentair Delavan Lab. Pump(s) will not be held in

Lab after this period.

Performance TestsNet Price

NOTES:

• Certified tests shall be factory laboratory tests conducted in accordance with the edition of

ANSI/HI 14.6 test standards. Test will be evaluated to Level 2B requirements.

• If the measured performance is within -3% to +5% of the published rating point or the customer

specified rating point, the pump will be shipped along with the documentation.

• The factory reserves the right to modify the impeller diameter in order to meet the published or

customer specified rating point.

• Head Capacity at the pump casing discharge and amperage draw by the motor will be provided on the

certified performance curve.

• Requested tests to any other ANSI level requirements will require a special quote. Please Refer to

the Factory for more information.

© 2021 Pentair. All Rights Reserved. 2 B13330BK-P • EFFECTIVE: JULY 5, 2021

Category AGD

6" (nominal) Submersible Pump Ends

5TMH Series – Stainless Steel Impellers, Cast Iron Bowls

Catalog

NumberList Price*

Catalog

NumberList Price*

5TMH5-75 5 4 B86830 $3,147 B86830N $3,432 107 (49)

5TMH7.5-75 7.5 6 B86831 4,038 B86831N 4,463 135 (61)

5TMH10-75 10 8 B86832 4,931 B86832N 5,497 163 (74)

5TMH15-75 15 11 B86545 6,311 B86545N 7,090 205 (93)

5TMH20-75 20 15 B86833 8,219 B86833N 9,281 261 (118)

5TMH25-75 25 19 B86834 10,343 B86834N 11,688 317 (144)

5TMH5-110 5 3 B87185 2,973 B87185N 3,184 71 (33)

5TMH7.5-110 7.5 5 B87187 4,032 B87187N 4,385 102 (47)

5TMH10-110 10 6 B87189 4,564 B87189N 4,988 118 (54)

5TMH15-110 15 10 B87191 6,686 B87191N 7,394 180 (82)

5TMH20-110 20 12 B87193 8,274 B87193N 9,197 212 (96)

5TMH25-110 25 14 B87195 9,870 B87195N 11,001 244 (111)

5TMH30-110 30 17 B87197 10,929 B87197N 12,202 292 (133)

5TMH5-170 5 2 B86588 2,441 B86588N 2,584 76 (35)

5TMH7.5-170 7.5 3 B86589 2,973 B86589N 3,184 96 (44)

5TMH10-170 10 4 B86590 3,502 B86590N 3,786 112 (51)

5TMH15-170 15 6 B86591 4,564 B86591N 4,988 148 (68)

5TMH20-170 20 8 B86592 5,625 B86592N 6,192 206 (94)

5TMH25-170 25 10 B86593 6,686 B86593N 7,394 252 (115)

5TMH30-170 30 12 B86594 7,746 B86594N 8,594 283 (129)

5TMH40-170 40 16 B86595 9,870 B86595N 11,001 364 (166)

5TMH5-250 5 1 B86552 2,051 B86552N 2,123 65 (30)

5TMH7.5-250 7.5 2 B86553 2,689 B86553N 2,829 79 (36)

5TMH10-250 10 2 B86554 2,689 B86554N 2,829 79 (36)

5TMH15-250 15 3 B86555 3,396 B86555N 3,609 93 (42)

5TMH20-250 20 5 B86843 5,094 B86843N 5,447 121 (55)

5TMH25-250 25 6 B86844 5,943 B86844N 6,367 135 (61)

5TMH30-250 30 7 B86845 6,790 B86845N 7,286 149 (68)

5TMH40-250 40 10 B86846 9,337 B86846N 10,045 191 (87)

5TMH50-250 50 12 B86847 11,034 B86847N 11,882 219 (100)

5TMH60-250 60 14 B86848 12,731 B86848N 13,721 247 (112)

Weight Lbs (kg)

416 SS Shaft Ion-Nitride Shaft

3" NPT

Dual

Flanged

4" & 6"

5TMH-75

Flow Pump Model HP Stages Discharge

75 GPM

Dual

Flanged

4" & 6"

250 GPM 4" NPT

Dual

Flanged

4" & 6"

Motor

Diameter

5TMH-110

5TMH-170

110 GPM 3" NPT

Dual

Flanged

4" & 6"

170 GPM 3" NPT

5TMH-250


Category AGD



Catalog

NumberList Price*

Catalog

NumberList Price*

5TMH5-375 5 1 B86522 2,067 B86522N 2,137 58 (27)

5TMH7.5-375 7.5 2 B86523 2,773 B86523N 2,916 75 (35)

5TMH10-375 10 2 B86524 2,773 B86524N 2,916 75 (35)

5TMH15-375 15 4 B87199 3,482 B87199N 3,695 109 (50)

5TMH20-375 20 5 B87201 4,243 B87201N 4,528 126 (57)

5TMH25-375 25 6 B87203 5,009 B87203N 5,363 143 (65)

5TMH30-375 30 7 B87205 5,774 B87205N 6,197 160 (73)

5TMH40-375 40 9 B87207 7,301 B87207N 7,867 194 (88)

5TMH50-375 50 11 B87209 8,828 B87209N 9,535 228 (103)

5TMH60-375 60 13 B87211 10,357 B87211N 11,205 262 (119)

5TMH7.5-425 7.5 1 B86720 2,067 B86720N 2,139 35 (16)

5TMH10-425 10 2 B86721 2,773 B86721N 2,918 51 (23)

5TMH15-425 15 3 B87178 3,482 B87178N 3,700 67 (30)

5TMH20-425 20 4 B86723 4,247 B86723N 4,536 83 (37)

5TMH25-425 25 5 B86724 5,010 B86724N 5,372 99 (45)

5TMH30-425 30 6 B86725 5,775 B86725N 6,206 116 (52)

5TMH40-425 40 7 B86726 6,538 B86726N 7,043 133 (60)

5TMH50-425 50 9 B86727 8,067 B86727N 8,715 167 (75)

5TMH60-425 60 10 B86728 8,832 B86728N 9,553 184 (83)

NOTE: 5TMH Series diameter = 5.625". For use in 6" and larger well casing.

*List Price includes Pump End only. For motor and control prices, refer to pages 30 - 34.

5TMH-425

425 GPM 4" NPT

Dual

Flanged

4" & 6"

375 GPM 4" NPT

Dual

Flanged

4" & 6"

5TMH-375

Motor

Diameter


Weight Lbs (kg)Flow Pump Model HP Stages Discharge


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

6TMH5-140 5 2 B86319 $2,485 B86319N $2,620 65 (29.6)

6TMH7.5-140 7.5 3 B86320 3,520 B86320N 3,720 66 (30)

6TMH10-140 10 3 B86321 3,520 B86321N 3,720 64 (29.1)

6TMH15-140 15 5 B86322 4,762 B86322N 5,109 77 (35)

6TMH20-140 20 6 B86323 5,593 B86323N 6,012 74 (33.7)

6TMH25-140 25 8 B86324 6,904 B86324N 7,460 123 (56)

6TMH30-140 30 9 B86325 7,862 B86325N 8,489 122 (55.5)

6TMH40-140 40 12 B86326 9,510 B86326N 10,347 163 (74.1)

6TMH50-140 50 16 B86327 12,131 B86327N 13,245 171 (77.8)

6TMH60-140 60 18 B86328 13,437 B86328N 14,692 172 (78.2)

6TMH5-200 5 1 B86374 2,071 B86374N 2,137 60 (27)

6TMH7.5-200 7.5 1 B86375 2,071 B86375N 2,137 60 (27)

6TMH10-200 10 2 B86376 2,485 B86376N 2,620 79 (37)

6TMH15-200 15 3 B86377 3,520 B86377N 3,720 98 (45)

6TMH20-200 20 4 B86855 4,351 B86855N 4,635 117 (53)

6TMH25-200 25 5 B86856 5,013 B86856N 5,368 136 (52)

6TMH30-200 30 6 B86857 5,889 B86857N 6,314 155 (70)

6TMH40-200 40 8 B86858 7,543 B86858N 8,109 193 (88)

6TMH40-200 40 8 8" Flanged B86764 7,957 B86764N 8,533 193 (88)

6TMH50-200 50 10

Dual

Flanged

4" & 6"

B86859 9,003 B86859N 9,711 231 (105)

6TMH50-200 50 10 8" Flanged B86765 9,423 B86765N 10,120 231 (105)

6TMH60-200 60 12

Dual

Flanged

4" & 6"

B86860 10,461 B86860N 11,312 269 (122)

6TMH60-200 60 12 B86766 10,891 B86766N 11,727 269 (122)

6TMH75-200 75 15 B86767 13,091 B86767N 14,138 326 (148)

6TMH100-200 100 19 B86768 13,825 B86768N 15,148 402 (182)

6TMH-200

200 GPM


Weight Lbs (kg)

6TMH-140

140 GPM 4" NPT

Dual

Flanged

4" & 6"

Flow Pump Model HP Stages DischargeMotor

Diameter

4" NPT

Dual

Flanged

4" & 6"

8" Flanged


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

6TMH5-300 5 1 B86199 2,178 B86199N 2,250 60 (27)

6TMH7.5-300 7.5 1 B86200 2,178 B86200N 2,250 60 (27)

6TMH10-300 10 2 B86201 2,616 B86201N 2,758 80 (36)

6TMH15-300 15 2 B86202 2,616 B86202N 2,758 80 (36)

6TMH15-300 15 3 B86203 3,704 B86203N 3,922 100 (45)

6TMH20-300 20 4 B86867 4,351 B86867N 4,635 120 (55)

6TMH25-300 25 5 B86868 5,013 B86868N 5,368 140 (64)

6TMH30-300 30 6 B86869 5,889 B86869N 6,313 160 (73)

6TMH40-300 40 8 B86870 6,586 B86870N 7,080 180 (82)

6TMH40-300 40 8 8" Flanged B86773 7,957 B86773N 8,512 297 (134)

6TMH50-300 50 9

Dual

Flanged

4" & 6"

B86871 8,272 B86871N 8,908 220 (100)

6TMH50-300 50 9 8" Flanged B86774 8,692 B86774N 9,318 319 (144)

6TMH60-300 60 11

Dual

Flanged

4" & 6"

B86872 9,734 B86872N 10,512 260 (101)

6TMH60-300 60 11 B86775 10,157 B86775N 10,923 364 (164)

6TMH75-300 75 13 B86776 11,625 B86776N 12,530 463 (208)

6TMH100-300 100 18 B86777 15,293 B86777N 16,544 575 (259)

6TMH7.5-450 7.5 1 B86260 2,071 B86260N 2,141 58 (26)

6TMH10-450 10 1 B86261 2,071 B86261N 2,141 58 (26)

6TMH15-450 15 2 B86262 2,485 B86262N 2,624 80 (36)

6TMH20-450 20 3 B86878 3,522 B86878N 3,734 102 (46)

6TMH25-450 25 3 B86264 3,520 B86264N 3,734 102 (46)

6TMH30-450 30 4 B86879 4,180 B86879N 4,458 124 (56)

6TMH40-450 40 5 B86880 4,762 B86880N 5,109 146 (66)

6TMH40-450 40 5 8" Flanged B86782 5,180 B86782N 5,527 225 (101)

6TMH50-450 50 6

Dual

Flanged

4" & 6"

B86881 5,583 B86881N 6,002 168 (76)

6TMH50-450 50 6 8" Flanged B86783 6,006 B86783N 6,441 247 (111)

6TMH60-450 60 8

Dual

Flanged

4" & 6"

B86882 6,894 B86882N 7,453 212 (96)

6TMH60-450 60 8 B86784 7,329 B86784N 7,908 290 (131)

6TMH75-450 75 10 B86785 8,655 B86785N 9,374 333 (150)

6TMH100-450 100 13 B86786 10,637 B86786N 11,576 451 (203)

NOTE: 6TMH Series diameter = 6.5". For use in 7" and larger well casing.

*List Price includes Pump End only. For motor prices, refer to pages 30 - 34.

450 GPM 4" NPT

Dual

Flanged

4" & 6"

8" Flanged

300 GPM 4" NPT

Dual

Flanged

4" & 6"

8" Flanged

6TMH-450

Flow Pump Model HP Stages

6TMH-300

DischargeMotor

Diameter


Weight Lbs (kg)


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

7TMH7.5-230 7.5 1 B87034 $3,146 B87034N $3,216 71 (32)

7TMH10-230 10 1 B87035 3,146 B87035N 3,216 71 (32)

7TMH15-230 15 2 B87036 4,097 B87036N 4,242 102 (46)

7TMH20-230 20 3 B87037 5,051 B87037N 5,268 134 (60)

7TMH25-230 25 3 B87038 5,051 B87038N 5,268 135 (61)

7TMH30-230 30 4 B87039 6,114 B87039N 6,406 166 (75)

7TMH40-230 40 6 B87040 8,916 B87040N 9,350 229 (104)

7TMH40-230 40 6 8" Flanged B87045 9,335 B87045N 9,773 236 (106)

7TMH50-230 50 6 6" Flanged B87041 8,916 B87041N 9,350 230 (104)

7TMH50-230 50 6 8" Flanged B87046 9,335 B87046N 9,773 237 (107)

7TMH60-230 60 7 6" Flanged B87044 10,034 B87044N 10,545 262 (118)

7TMH60-230 60 7 B87047 10,456 B87047N 10,965 269 (121)

7TMH75-230 75 9 B87048 12,696 B87048N 13,350 333 (150)

7TMH100-230 100 13 B87049 17,178 B87049N 18,124 460 (207)

7TMH10-350 10 1 B87009 3,146 B87009N 3,216 68 (31)

7TMH20-350 20 2 B87010 4,097 B87010N 4,242 97 (44)

7TMH30-350 30 3 B87011 5,051 B87011N 5,268 127 (57)

7TMH40-350 40 4 B87012 6,114 B87012N 6,406 156 (70)

7TMH40-350 40 4 8" Flanged B87015 6,533 B87015N 6,826 162 (73)

7TMH50-350 50 5 6" Flanged B87013 7,446 B87013N 7,809 186 (84)

7TMH50-350 50 5 8" Flanged B87016 7,865 B87016N 8,227 192 (86)

7TMH60-350 60 6 6" Flanged B87014 8,916 B87014N 9,350 215 (97)

7TMH60-350 60 6 B87017 9,335 B87017N 9,773 222 (100)

7TMH75-350 75 7 B87018 10,456 B87018N 10,965 251 (113)

7TMH100-350 100 10 B87019 13,817 B87019N 14,546 340 (153)

7TMH10-500 10 1 B86932 3,146 B86932N 3,216 88 (40)

7TMH15-500 15 1 B86933 3,146 B86933N 3,216 89 (40)

7TMH25-500 25 2 B86935 4,097 B86935N 4,242 126 (57)

7TMH30-500 30 2 B86936 4,097 B86936N 4,242 127 (57)

7TMH40-500 40 3 B86937 5,051 B86937N 5,268 157 (71)

7TMH40-500 40 3 8" Flanged B86947 5,468 B86947N 5,688 195 (88)

7TMH50-500 50 4 6" Flanged B86938 6,114 B86938N 6,406 205 (92)

7TMH50-500 50 4 8" Flanged B86948 6,533 B86948N 6,826 211 (95)

7TMH60-500 60 5 6" Flanged B86939 7,446 B86939N 7,809 235 (106)

7TMH60-500 60 5 B86949 7,865 B86949N 8,227 255 (115)

7TMH75-500 75 6 B86950 9,335 B86950N 9,773 285 (128)

7TMH100-500 100 8 B86951 11,577 B86951N 12,158 346 (158)


Weight Lbs (kg)

7TMH-230

230 GPM 5/6" NPT

6" Flanged

8" Flanged


Diameter

7TMH-350

350 GPM 5/6" NPT

6" Flanged

8" Flanged

7TMH-500

500 GPM 5/6" NPT

6" Flanged

8" Flanged


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

7TMH30-750 30 2 B86900 4,097 B86900N 4,242 182 (82)

7TMH40-750 40 3 B86901 5,051 B86901N 5,268 142 (64)

7TMH40-750 40 3 8" Flanged B86906 5,468 B86906N 5,688 225 (101)

7TMH50-750 50 3 6" Flanged B86902 5,051 B86902N 5,268 182 (82)

7TMH50-750 50 3 8" Flanged B86908 5,468 B86908N 5,688 225 (101)

7TMH60-750 60 4 6" Flanged B86903 6,114 B86903N 6,406 240 (108)

7TMH60-750 60 4 B86909 6,533 B86909N 6,826 265 (119)

7TMH75-750 75 5 B86910 7,865 B86910N 8,227 305 (137)

7TMH100-750 100 6 B86911 9,335 B86911N 9,773 345 (155)

*List Price includes Pump End only. For motor control prices, refer to pages 30 - 34.

750 GPM 5/6" NPT

6" Flanged

8" Flanged

7TMH-750

Flow


Weight Lbs (kg)Pump Model HP Stages DischargeMotor

Diameter


Category AGD


8T15-950 15 1 6" B86221 $3,149 112

8T20-950 20 1 6" B86222 3,149 112

8T25-950 25 1 6" B86223 3,149 112

8T30-950 30 2 6" B86224 4,194 144

8T40-950 40 2 6" B86225 4,194 144

8T40-950 40 2 8" B86226 4,194 149

8T50-950 50 3 6" B86227 5,244 176

8T50-950 50 3 8" B86228 5,244 181

8T60-950 60 3 6" B86229 5,244 176

8T60-950 60 3 8" B86230 5,244 181

8T75-950 75 4 8" B86231 6,290 213

8T100-950 100 5 8" B86232 7,338 245

8T125-950 125 6 8" B86233 8,384 277

8T150-950 150 7 8" B86234 9,148 304

8T175-950 175 8 8" B86235 10,167 336

8T200-950 200 10 8" B86236 12,207 400


Pump Model HP Stage(s)Discharge

(Female)Motor Diameter

8T – Stainless Steel Impellers, Cast Iron Bowls

Catalog Number

List

Price*Weight (lbs.)

950 GPM 6" F NPT


Category AGD

10" (nominal) Submersible Pump Ends10TMH Series – Stainless Steel Impellers, Cast Iron Bowls

Catalog

NumberList Price*

10TMH60-750 60 1 B87080 $4,139 273

10TMH75-750 75 1 B87164 4,139 273

10TMH100-750 100 2 B87081 5,436 359

10TMH125-750 125 2 B87082 5,436 361

10TMH150-750 150 3 B87083 7,260 429

10TMH175-750 175 3 10" Mtr, "A" Register B87084 7,260 440

10TMH175-750 175 3 10" Mtr, "B" Register B87085 7,260 438



10TMH60-1000 60 1 B87099 4,139 273

10TMH75-1000 75 1 B87100 4,139 274

10TMH125-1000 125 2 B87102 5,969 363

10TMH150-1000 150 2 B87103 5,969 364





10TMH75-1350 75 1 B87116 4,139 274

10TMH100-1350 100 1 B87117 4,139 275

10TMH125-1350 125 2 B87118 5,436 363

10TMH150-1350 150 2 B87119 5,436 364





10TMH75-1750 75 1 B87132 4,098 270

10TMH100-1750 100 1 B87133 4,098 271

10TMH125-1750 125 1 B87134 4,098 271

10TMH150-1750 150 2 B87135 5,969 359





10TMH75-2250 75 1 B87148 4,098 267

10TMH100-2250 100 1 B87149 4,098 268

10TMH125-2250 125 1 B87150 4,098 268

10TMH150-2250 150 2 B87151 5,969 353






Weight Lbs (kg)

10TMH-750

750 GPM

8"

Flow Pump Model HP Stages Discharge Motor Diameter

416 SS Shaft

8" NPT

10TMH-1000

1000 GPM

10TMH-1350

1350 GPM

8"

8" NPT

8" NPT

8"

10TMH-1750

1750 GPM

8"

10TMH-2250

2250 GPM

8"

8" NPT

8" NPT


Category AGB


Flow Pump Model HP Stage(s)Discharge

(Female)

Motor

Diameter

Catalog

Number

List

Price* Weight (lbs.)

10T40-750 40 1 6" B85325 $4,578 163

10T40-750 40 1 8" B82893 4,578 163

10T50-750 50 2 6" B85326 6,098 232

10T50-750 50 2 8" B82894 6,098 232

10T60-750 60 2 6" B85327 6,098 232

10T60-750 60 2 B82895 6,098 232

10T75-750 75 3 B82896 7,616 302

10T100-750 100 3 B82897 7,616 302

10T125-750 125 4 B82898 9,144 371

10T150-750 150 5 B82899 10,666 441

10T175-750 175 5 B85313 10,666 441

10T200-750 200 6 B82900 12,188 510

10T40-900 40 1 6" B85328 4,578 163

10T40-900 40 1 8" B82901 4,578 163

10T50-900 50 1 6" B85329 4,578 163

10T50-900 50 1 B82902 4,578 163

10T75-900 75 2 B82903 6,098 232

10T100-900 100 2 B82904 6,098 232

10T125-900 125 3 B82905 7,616 302

10T150-900 150 3 B82906 7,616 302

10T175-900 175 4 B85314 9,144 371

10T200-900 200 4 B82907 9,144 371

10T50-1200 50 1 6" B85330 4,578 163

10T50-1200 50 1 8" B82908 4,578 163

10T60-1200 60 1 6" B85331 4,578 163

10T60-1200 60 1 B82909 4,578 163

10T75-1200 75 1 B82910 4,578 163

10T100-1200 100 2 B82911 6,098 232

10T125-1200 125 2 B82912 6,098 232

10T150-1200 150 2 B82913 6,098 232

10T175-1200 175 3 B85315 7,616 302

10T200-1200 200 3 B82914 7,616 302

10T50-1600 50 1 B86281 4,555 168

10T60-1600 60 1 B85332 4,673 168

10T60-1600 60 1 B82915 4,673 168

10T75-1600 75 1 B82916 4,673 168

10T100-1600 100 2 B82917 6,290 240

10T125-1600 125 2 B82918 6,290 240

10T150-1600 150 3 B82919 7,905 312

10T175-1600 175 3 B85316 7,905 312

10T200-1600 200 4 B82920 9,521 384


750 GPM 8" F NPT

8"

900 GPM 8" F NPT

8"

1200 GPM 8" F NPT

8"

1600 GPM 8" F NPT

6"

8"


Category AGB



(Female)

Motor

Diameter

Catalog

Number

List


10T60-1900 60 1 B85468 4,872 168

10T75-1900 75 1 B85469 4,872 168

10T100-1900 100 1 B85470 4,872 168

10T125-1900 125 2 B85471 6,682 240

10T150-1900 150 2 B85472 6,682 240

10T175-1900 175 2 B85473 6,682 240

10T200-1900 200 3 B85474 8,491 312

1900 GPM 8" F NPT 8"

*List Price includes Pump End only. For motor prices, refer to pages 30 - 34



Category AGB

6" Submersible Pump Ends

6TSP – Stainless Steel Pump Sleeve, Noryl® Impellers


Diameter

Catalog

NumberList Price* Weight (Lbs)

6TSP1.5-50 1-1/2 3 B86101 $1,519 30

6TSP2-50 2 4 B86102 1,582 31

6TSP3-50 3 5 B86103 1,695 32

6TSP5-50 5 8 B87216 2,120 36

6TSP7.5-50 7-1/2 11 B86105 2,386 40

6TSP10-50 10 15 B86106 2,817 46

6TSP15-50 15 24 B86107 3,466 58

6TSP3-75 3 3 4" B86108 1,684 30

6TSP5-75 5 5 B86109 2,074 32

6TSP7.5-75 7-1/2 7 B86110 2,305 35

6TSP10-75 10 9 B86111 2,505 38

6TSP15-75 15 13 B86112 2,867 43

6TSP20-75 20 17 B86113 3,326 48

6TSP25-75 25 23 B86114 4,053 54

6TSP5-100 5 3 4" B87287 2,330 32

6TSP7.5-100 7-1/2 5 B87288 2,371 32

6TSP10-100 10 6 B86117 2,432 34

6TSP15-100 15 9 B86118 2,993 38

6TSP20-100 20 13 B87291 3,389 43

6TSP25-100 25 16 B86120 3,470 47

3"4" & 6"


3"

4"

4" & 6"

3"4" & 6"

75 GPM

100 GPM

50 GPM


Category AGB


6TS – Stainless Steel Impellers, Stainless Steel Bowls


(Female)

Motor

Diameter

With

Check

Valve

Without

Check

Valve

List


6TS2-115 2 1 4” B85963 B85975 1,609 24

6TS5-115 5 2 4” B85964 B85976 2,009 29

6TS5-115 5 2 6” B85965 B85977 2,009 29

6TS7.5-115 7-1/2 4 4” B85966 B85978 2,831 40

6TS7.5-115 7-1/2 4 6” B85967 B85979 2,831 40

6TS10-115 10 5 4” B85968 B85980 3,275 47

6TS10-115 10 5 B85969 B85981 3,275 47

6TS15-115 15 8 B85970 B85982 4,540 62

6TS20-115 20 11 B85971 B85983 5,403 79

6TS25-115 25 14 B85972 B85984 6,661 90

6TS30-115 30 17 B85973 B85985 7,946 105

6TS40-115 40 23 B85974 B85986 10,054 129

6TS3-155 3 1 4” B85987 B86001 1,787 24

6TS5-155 5 2 4” B85988 B86002 2,248 29

6TS5-155 5 2 6” B85989 B86003 2,248 29

6TS7.5-155 7-1/2 3 4” B85990 B86004 2,714 35

6TS7.5-155 7-1/2 3 6” B85991 B86005 2,714 35

6TS10-155 10 4 4” B85992 B86006 3,175 40

6TS10-155 10 4 B85993 B86007 3,175 40

6TS15-155 15 6 B85994 B86008 4,177 51

6TS20-155 20 8 B85995 B86009 5,165 62

6TS25-155 25 10 B85996 B86010 6,135 73

6TS30-155 30 12 B85997 B86011 7,135 84

6TS40-155 40 16 B85998 B86012 9,100 106

6TS50-155 50 20 B85999 B86013 11,066 128

6TS60-155 60 22 B86000 B86014 12,101 139

6TS3-230 3 1 4” B86015 B86029 1,765 40

6TS5-230 5 1 4” B86016 B86030 1,765 44

6TS5-230 5 1 6” B86017 B86031 1,765 44

6TS7.5-230 7-1/2 2 4” B86018 B86032 2,293 49

6TS7.5-230 7-1/2 2 6” B86019 B86033 2,293 49

6TS10-230 10 3 4” B86020 B86034 2,822 53

6TS10-230 10 3 B86021 B86035 2,822 53

6TS15-230 15 5 B86022 B86036 3,859 62

6TS20-230 20 7 B86023 B86037 4,724 67

6TS25-230 25 8 B86024 B86038 5,469 76

6TS30-230 30 10 B86025 B86039 6,508 89

6TS40-230 40 14 B86026 B86040 8,621 103

6TS50-230 50 17 B86027 B86041 10,233 116

6TS60-230 60 21 B86028 B86042 12,326 129

115 GPM 3”

6”

155 GPM 3”

6”

230 GPM 4”

6”


Category AGB


6TS – Stainless Steel Impellers, Stainless Steel Bowls


(Female)

Motor

Diameter

With

Check

Valve

Without

Check

Valve

List


6TS5-300 5 1 4” B86043 B86056 1,809 40

6TS5-300 5 1 6” B86044 B86057 1,809 40

6TS7.5-300 7-1/2 2 4” B86045 B86058 2,380 44

6TS7.5-300 7-1/2 2 6” B86046 B86059 2,380 44

6TS10-300 10 2 4” B86047 B86060 2,380 44

6TS10-300 10 2 B86048 B86061 2,380 44

6TS15-300 15 4 B86049 B86062 3,526 55

6TS20-300 20 5 B86050 B86063 4,098 60

6TS25-300 25 7 B86051 B86064 4,671 70

6TS30-300 30 8 B86052 B86065 5,816 75

6TS40-300 40 11 B86053 B86066 6,957 90

6TS50-300 50 14 B86054 B86067 8,675 105

6TS60-300 60 17 B86055 B86068 9,821 120


300 GPM 4”

6”


Category AGB

Pentair Berkeley® 6TS Series Kit Component Program

Part Number Description List Price MPQ*

KIT 6TS-BKT4 6TS COMP KIT 4 INCH MTR BRKT KIT A 4/CS $711 4

KIT 6TS-BKT6 6TS COMP KIT 6 INCH MTR BRKT KIT B 4/CS 711 4

KIT 6TS-115FST 6TS COMP KIT 6TS-115FST KIT E 5/CASE 412 5

KIT 6TS-155FST 6TS COMP KIT 6TS-155FST KIT F 5/CASE 412 5

KIT 6TS-230FST 6TS COMP KIT 6TS-230FST KIT G 5/CASE 490 5

KIT 6TS-300FST 6TS COMP KIT 6TS-300FST KIT H 5/CASE 530 5

KIT 6TS-115MID 6TS COMP KIT 6TS-115MID KIT L 5/CASE 240 5

KIT 6TS-155MID 6TS COMP KIT 6TS-155MID KIT M 5/CASE 240 5

KIT 6TS-230MID 6TS COMP KIT 6TS-230MID KIT N 5/CASE 370 5

KIT 6TS-300MID 6TS COMP KIT 6TS-300MID KIT P 5/CASE 406 5

KIT 6TS-D3NPT 6TS COMP KIT 6TS-D3NPT KIT Y 6/CASE 358 6

KIT 6TS-D4NPT 6TS COMP KIT 6TS-D4NPT KIT Z 6/CASE 412 6

LK-BK BRANDING KIT NAMEPLATE LABELS DECALS BK 16 1

KIT 6TS115-300-1-4 6TS115-300 SHAFT STRAP LD GUARD KIT 1ST 534 1





KIT 6TS-115-300-1 6TS115-300 SHAFT STRAP LD GUARD KIT 1ST 534 1







KIT 6TS-115-300-8 6TS115-300 SHAFT STRAP LD GUARD KIT 8st 651 1










Shaft/Strap/Cable-Guard KIT (Cut to length) For Use with 4" Motor Bracket

*MPQ = Master Pack Quantities. Must purchase in multiples of Master Pack Quantities. Prices subject to change without notice.

Suction Bracket KIT

First-Stage KIT

Intermediate-Stage KIT

Discharge KIT

Label KIT

Shaft/Strap/Cable-Guard KIT (Cut to length) For Use with 6" Motor Bracket


Category AGE

Assembly Tools

TMH Series Assembly Tools

Catalog Number

List

Price

M16666 Tool, Assembly Rubber Bearing For 1.00 Dia Shafts $413

M16667 1,072

M17163 1,193

M16669 1,272

M16670 62

M16671 70

M16672 79

M16788 736

M16789 713

M16790 749

M16791 788

M16676 513

M16677 516

M16678 516

M16679 517

M17063 516

75 110/170 250 375 425 140 200 300 450 230 350 500 750

M16676 X X X

M17063 X

M16677 X X X X X

M16678 X

M16679 X X X

Fixture .100 Shortened TMH 10" Motor

Bowl Wrench Table

7TMH6TMH5TMH

Laterial Inspection Tools

Collet Drivers

Diffuser Wrenches

Tool, Inspection TMH 4" & 6" Motor Full LG Shaft

Tool, Inspection TMH 8" Motor Full LG Shaft

Tool, Inspection TMH 10" Motor Full LG Shaft

Collet Driver 1.00 Shaft




Description

Bowl Bearing Insert Tool


Assembly Fixtures


Wrench, Diffuser TMH Sub-Turbine






Category AGE

Shared Components

Catalog

NumberDescription

List

Price

S05301 1" collet $32.00

S13636 1" bowl bearing 22.30

S10708 BEARING,BOWL 1"SFT BRZ 1-3/4 LG VTP 27.00

308666000 CABLE GUARD 1-1/2" 302SS CHANNEL 12' LNG 243.00

M15882 Upthrust Screw 87.00

M15881 Upthrust Nut 72.00

M15847 4" motor coupling adapter 85.00

B86966 6" motor coupling with O-Ring 83.00

B87061 8" motor coupling with O-Ring 617.00

B76087 Bolt Kit, 4" Motor 45.00



M15937 Screen Screw SCREW 8-32X.375 PAN HEAD TYPE F 2.06

B87175 Package Documentation-TMH Submersibles 24.43

M10172 Pop Rivet, 5/32" x 3/8" lg. 6.17

M12165PNR Nameplate 10.98

BE972 Owner’s Manual 9.25

M09970 Upthrust adj tag 7.54

M15886 VESCONITE BEARING 43.00

M10252 GUARD,WIRE 1.88" WIDTH 302SS 185.00

L07935 SHAFT 1"DIA 416SS SPLINEDBOTH ENDS 532.00

B86420 DISCHARGE BEARING ASM 5TMH 3IN NPT 344.00

M16054 DISCHARGE 5IN MACH CI TMH SERIES 3" NPT 164.00

B86418 DISCHARGE BEARING ASM 5TMH 4IN NPT 383.00

M16055 DISCHARGE 5IN MACH CI TMH SERIES 4" NPT 195.00

M16053 5TMH 4/6" Mtr Bracket 305.00

M16056 SCREEN SUCTION 5IN SS TMH SERIES 36.00

M16057 DISCHARGE 5TMH SUBTURBINE 3" BSPT MACH RTF

M16058 DISCHARGE 5TMH SUBTURBINE 4" BSPT MACH RTF

M15878 CLAMP 5" CABLE GUARD 9.95

Catalog

NumberDescription

List

Price

B86185 DISCHARGE BEARING ASM 6TMH 4" IN NPT 411.00

M15868 6TMH Discharge 181.00

M15869 6TMH 4/6" Mtr Bracket 350.00

M16428 6TMH 8" Mtr Bracket 382.00

M15870 Suction Screen, 6" Intake 40.00

M16429 Suction Screen, 8" Intake 93.00

M15885 DISCHARGE 6TMH MACH 4" BSPT CI RTF

M15879 CLAMP 6" CABLE GUARD 9.95

5, 6, 7TMH Shared Components

5TMH Series Shared Components



Category AGE

Shared Components


Catalog

NumberDescription

List

Price

B86886 DISCHARGE BEARING ASM 7TMH 5"/6" NPT 447.00

M16386 BRAKET SUCTION 7TMH MACH CI 350.00

M16573 BRACKET SUCTION 7TMH 8IN MTR FLG MACH CI 382.00

M16565 SCREEN SUCTION 7TMH SS 80.00

M16578 SCREEN SUCTION 7TMH 8" MOTOR SS 95.00

M15880 CLAMP 7" 1-1/2" CABLE GUARD 10.30

M10192 CLAMP 7" 1-3/4" CABLE GUARD 24.35

5, 6, 7TMH Shared Components


Category AGE

5TMH Series

5TMH Flow Specific Components

Catalog Number Description List Price

M16029 IMPELLER 5TMH-75 MACH SS 4.275-OD $226

M16030 IMPELLER 5TMH-75 MACH SS 3.793-OD 226

B86446 BOWL, W/BEARING ASSY, 5TMH-75 225

M16272 INSERT SUCTION 5TMH-75 69

B86445 SUCTION INSERT ASM 5TMH-75 370



B86615 BOWL, W/BEARING ASSY, 5TMH-110/170 225

M16273 INSERT SUCTION 5TMH-110/170 69

B86614 SUCTION INSERT ASM 5TMH-110/170 381

M16037 IMPELLER 5TMH-170 MACH SS 4.370 OD 301




M16273 INSERT SUCTION 5TMH-110/170 69






M16274 INSERT SUCTION 5THM-250 64


M16045 IMPELLER 5TMH-375 MACH SS 4.370 376

M16046 IMPELLER 5TMH-375 MACH SS 4.110 376






5TMH-425

5TMH-75

5TMH-110

5TMH-170

5TMH-250

5TMH-375


Category AGE

5TMH Series

5TMH Series Shafts

416SS Shaft

Catalog Number

List

Price

Ion-Nitride Shaft

Catalog Number

List

PriceStages

Length

(IN)

Length

(mm)75 110/170/250 375 425

M16218 $66 M16232 $428 1 12.5 [317.5] X

M16003 69 M16015 435 1 12.75 [323.9]

M16220 135 M16233 454 2 19 [482.6] X

M16191 104 M16199 459 2 19.5 [495.3]

M16277 117 M16328 469 3 21.5 {546.1] X

M16220 135 M16234 488 3 25.5 [647.7] X

M16192 138 M16200 495 3 26.25 [666.8]

M16603 142 M16607 555 4 26.75 [679.5] X

M16221 169 M16235 NLA 4 32 [812.8] X

M16193 176 M16201 523 4 33 [838.2]

M16604 197 M16610 531 6 37.25 [946.2] X

M16222 204 M16236 548 5 38.5 [977.9] X

M16194 212 M16202 553 5 39.75 [1009.7]

M16279 224 M16330 559 7 42.5 [1079.5] X

M16223 238 M16237 579 6 45 [1143.0] X

M16195 245 M16203 586 6 46.5 [1181.1]

M16280 251 M16331 591 8 47.75 [1212.9] X

M16224 272 M16238 603 7 51.5 [1308.1] X

M16317 281 M16543 602 7 53.25 [1352.6]

M16225 307 M16239 632 8 58 [1473.2] X

M16196 315 M16204 639 8 60 [1524.0]

M16281 334 M16332 654 11 63.5 [1612.9] X

M16226 339 M16240 670 9 64.5 [1638.3] X

M16318 353 M16544 655 9 66.75 [1695.5]

M16227 373 M16241 691 10 71 [1803.4] X

M16197 384 M16205 698 10 73.5 [1866.9]

M16282 418 M16333 707 14 79.25 [2013] X

M16228 443 M16242 725 12 84 [2133.6] X

M16606 445 M16612 715 15 84.5 [2146.3] X

M16198 459 M16206 730 12 87 [2209.8] X

M16229 475 M16243 736 13 90.5 [2298.7] X

M16283 502 M16334 742 17 95 [2413] X

M16284 528 M16335 752 18 100.25 [2546.4] X

M16357 546 M16358 762 15 103.5 [2628.9] X

M16607 555 M16613 960 19 105.5 [2679.7] X

M16230 579 M16244 778 16 110 [2794.0] X

M16285 610 M16336 788 21 116 [2946.4] X

M16383 648 M16384 805 18 123 [3124.2] X

X

X

X

X

X

X

X

X

X

X


Category AGE

6TMH Series






M15876 INSERT 6TMH 140/200 76





M15876 INSERT 6TMH 140/200 76



M15861 IMPELLER 6-300 MACH SS 5.00-OD 399

M15862 IMPELLER 6-300 MACH SS 4.75-OD 399


M15877 INSERT 6TMH-300 SUCTION 42






6TMH-140

6TMH-200

6TMH-300 series specific components

6TMH-450 series specific components


Category AGE

6TMH Series

416 SS Shaft Catalog

NumberList Price

Ion-Nitride Shaft

Catalog NumberList Price Stages

Length

(IN)

Length

(mm)140/200 300 450

M16093 $62 M16126 NLA 1 11.50 [292.1] X

M15916 63 M15947 NLA 1 11.75 [298.5] X

M16003 69 M16015 435 1 12.75 [323.8] X

M16094 96 M16127 NLA 2 17.75 [450.9] X

M15917 98 M15948 NLA 2 18.25 [463.6] X

M16004 106 M16016 NLA 2 20.25 [514.4] X

M16095 128 M16128 NLA 3 24.00 [609.6] X

M15918 131 M15949 NLA 3 24.75 [628.7] X

M16005 148 M16017 NLA 3 27.75 [704.9] X

M16096 162 M16129 NLA 4 30.25 [768.4] X

M15919 167 M15950 NLA 4 31.25 [793.8] X

M16006 186 M16018 NLA 4 35.25 [895.4] X

M16097 192 M16130 537 5 36.50 [927.1] X

M15920 201 M15951 NLA 5 37.75 [958.9] X

M16098 225 M16131 565 6 42.75 [1085.9] X

M16007 225 M16019 NLA 5 42.75 [1085.9] X

M15921 235 M15952 NLA 6 44.25 [1124.0] X

M16008 267 M16020 NLA 6 50.25 [1276.4] X

M16099 291 M16132 NLA 8 55.25 [1403.4] X

M15923 305 M15954 NLA 8 57.25 [1454.2] X

M16100 326 M16133 NLA 9 61.50 [1562.1] X

M15924 336 M15955 NLA 9 63.75 [1619.3] X

M16496 344 M16531 NLA 8 65.25 [1657.4] X

M16101 358 M16134 NLA 10 67.75 [1720.9] X

M16620 403 M16621 877 11 76.75 1949.5 X

M16102 423 M16135 NLA 12/10 80.25 [2038.4] X X

M16167 481 M16665 762 13 89.75 [2279.7] X

M16497 511 M16250 NLA 15 99.00 [2514.6] X

M16500 538 M16534 767 13 102.75 [2609.9] X

M16103 553 M16136 NLA 16 105.25 [2673.4] X

M16104 620 M16300 NLA 18 117.75 [2990.9] X

M16503 633 M16521 818 18 122.25 [3102.5] X

M16504 654 M16538 816 18 124.00 [3149.6] X

6TMH Series Shafts


Category AGE

7TMH Series






B86883 BOWL 7TMH-230 BEARING ASM 597

B86884 INTAKE WITH INSERT ASSEMBLY 7TMH-230 6" 476


M16596 INSERT, INTAKE (MACHINING) 7TMH-230 GPM 130

M16624 IMPELLER 7TMH-350 MACH SS TRIM A 592

B86969 BOWL 7TMH-350 BEARING ASM 592



M16627 INSERT 7TMH-350 SUCTION BRACKET 130




B86796 SUCTION INSERT ASM 7TMH 6IN-500 455

B86797 SUCTION INSERT ASM 7TMH 8IN-500 RTF

M16586 INSERT SUCTION 7THM-500 130








7TMH-230

7TMH-350

7TMH-500

7TMH-750


Category AGE

7TMH Series

416 SS Shaft

Catalog Number

List

Price

Ion-Nitride

Shaft Catalog

Number

List

PriceStages Length (IN)

Length

(mm)230 350 500 750

M16687 $79 M16687N $470 1 15.25 (387.35) X X X

M16688 125 M16688N 495 2 23.25 (590.55) X X X

M16096 162 M16331 591 2 30.25 (769) X

M15919 167 M15950 NLA 3 31.25 (793.75) X X X

M16689 212 M16689N 564 4 39.25 (996.95) X X X

M16635 221 M16640 570 3 41.75 (1061) X

M16690 251 M16690N 597 5 47.25 (1200.15) X X

M16636 286 M16642 617 4 53.25 (1353) X

M16099 291 M16132 NLA 6 55.25 (1403.35) X X X

M16841 333 M16843 659 7 63.25 (1606.55) X X

M16637 347 M16642 617 5 64.75 (1645) X

M16691 380 M16691N 705 8 71.25 (1809.75) X

M16638 396 M16643 713 6 76.25 (1937) X

M16282 418 M16333 707 9 79.25 (2012.95) X

M16842 464 M16844 739 10 87.25 (2216.15) X

M16854 587 M16854N 789 13 111.25 (2825.75) X

7TMH Series Shafts


RTF for Multplier



M16146 Bearing, Rubber $38.00

M17017 BEARING SLEEVE 1 1/2x2x2.4 VESCONITE 185.00

M16144 BEARING SLEEVE 1 1/2 X2 x2.4 BRONZE 25.28

M16764 Coupling, 8" motor (Inc key) 1,137.00

M16765 Coupling, 10", "A" Register (Inc key) 1,335.00

M16766 Coupling, 10", "B" Register (Inc key) 1,192.00

M16762 8" Motor Adapter 207.00

M16763 10" Motor Adapter 244.00

LV2275004 3080F Collet 92.00

M16720N Discharge 201.00

M16761 Suction Screen 790.00

HYD6E136 9923F O-Ring 3.47

M14791 Thrust Washers 12.35

S23623 CAPSCREW,HEX HD 1/2-13NC X 1-1/2L 303SS 12.35

11F7A0113 0005F Bowl Capscrews 1/2-13X1-1/2 UNC HEX 18-8 SST 9.19

M09653PNR Nameplate 4.81

M10199 Rivet 6.17

11F7A0203 0005F SCREW-CAP 3/4-10X 2-1/4 UNC HEX 18-8 SST 8.49

11F25A10008 0005F NUT-HEX 3/4-10 UNC REGULAR 18-8 SST 6.80

11FM8C0112 0005F CAP SCREW 1/2-13 X 1-1/4 UNC S OCKET HEA 5.55

M16730 SAND SLINGER 10TMH 316SS 290.00

S23982 Sand Collar setscrews 13.99

M13517 Direction Arrow RTF

B87157 KIT FASTENERS 10TMH-SERIES 8" SUB MOTOR 26.01

B87158 KIT FASTENERS 10TMH-SERIES 10" SUB MOTOR 79.00

Cable Guards

8" Motors


M17035 1 Stg, 750, 1000, 1350, 1750, 2250 Series 69.00

M17037 2 Stg, 750, 1000, 1350, 1750, 2250 Series 88.00

M17039 3 Stg, 750 Series 104.00

M17044 2 Stg, 1350, 1750, 2250 Series 147.00

M17046 3 Stg, 750, 1000 Series 175.00

M17047 3 Stg, 1350 Series 177.00

M17048 4 Stg, 750 Series 195.00


M17028 1 Stg, 750, 1000, 1350, 1750, 2250 Series 314.00

M17030 2 Stg, 750, 1000 Series 394.00

M17029 2 Stg, 1350, 1750, 2250 Series 374.00

M17033 3 Stg, 750, 1000 Series 434.00

M17031 3 Stg, 1350, 1750, 2250 Series 423.00

M17034 4 Stg, 750 Series 469.00

Pump Shafts

Shafts fit both 8" and 10" Motors

10" Motors


RTF for Multplier

10TMH Series Specific Components


M17058 10TMH-750 "A" Impeller 8.00" Trim A 602.00

M17004 10TMH-750 "B" Impeller 7.77" Trim B 683.00

M17005 10TMH-750 "C" Impeller 7.44" Trim C 683.00

M17006 10TMH-750 "D" Impeller 7.25" Trim D 683.00

B87064 Bowl Assy, rubber 491.00

M17057 Bowl, less bearing 405.00

M16759 Suction Insert, 10TMH-750 82.00

M16734 IMPELLER 10VT550/10TMH1000 MACH SS 8.00 Trim A 572.00

M17011 IMPELLER 10TMH-1000 MACH SS 7.51-OD Trim B 647.00

M17012 IMPELLER 10TMH-1000 MACH SS 7.24-OD Trim C 647.00



M16760 Suction Insert, 10TMH-1000/1350 58.00










M17020 IMPELLER 10TMH-1750 MACH SS 7.23-OD Trim D 683.00







M17009 IMPELLER 10TMH-2250 MACH SS 7.26-OD Trim D 683.00




10TMH-2250

10TMH-1350

10TMH-1750

10TMH-750

10TMH-1000


Category AGE

10T Series

Description ITEM NO. Catalog Number LIST PRICE

BRACKET,10T-750,900,1200 W/6" MOTOR 71A M14612 $1,511.00

BRACKET FOR 10T W/1.5"SHAFT,8"MTR 71B M14090 1215.00

WEAR RING 10T FM# LV6775149208 9649 213 M14164 106.00

BEARING, BRACKET FOR SUB TURBINE W/1-1/2 39C M08375 135.00

COLLAR,SAND 10O4 1-1/2 ID 932BRZ 1-1/2 I 40 S34223 305.00

Screw, 3/8-16 x 1/2" Lg Set Hex-Socket C 800C S24289 6.17

SCREEN, SUCTION 1/2 IN NO. 18 X 12 IN X 209 M06684 215.00

COUPLING-1" SHAFT 70 387630500 74.00

Coupling splined 1.5" shaft Franklin 70 L06905 548.00

GUARD,WIRE 1.88" WIDTH 302SS 17 M10252 185.00

CLAMP,SCREEN 2-13/16 ID - 3-3/4 ID SS 801A S14661 12.35

CLAMP,LEAD GUARD 10SUB TRIDON 620-188 801B M10193 24.35

WASHER, LOCK, SPRING 5/8 S23093 6.17

NAMEPLATE BERKELEY ORANGE M12165PNR 10.98

RIVET,POP 0.093 DIA. X 0.22 LG. M10199 6.17

TAG, SUB TURBINE UPTHRUST ADJUSTMENT M09970 7.54

OWNERS MANUAL REV 6-28-006T SUBS BE215 8.91

DISCHARGE 8"NPR 10T-750,900,1200 197 M14092 469.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 6.17


WASHER,THRUST,3.25OD x 1.5IDx.14T 18-8SS 801C M14791 12.35

BOWL 750, 900, 1200 FM# LV1055075 02 199 M14163 708.00

WEAR RING 10T FM# LV6775149208 9649 213 M14164 106.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 6.17

BEARING 10T FM# LV0695065208 9649 F 39B M14167 35.00

COLLET 10T FM# LV2275004107 3080 F 84 M14168 106.00

SHAFT 10T-750,900,1200 1STG 17.25" 6"MTR 5 M14669 158.00

PUMP SHAFT 16.88"LG 1.5"DIA 1STG 5 M14120 310.00

SHAFT 10T-750,900,1200 2STG 24.69" 6"MTR 5 M14670 224.00






IMPELLER 750 FM# LV4455274104 2660 F 8 M14159 652.00

IMPELLER 7.25"DIA 10T-750 8 M14137 1343.00

IMPELLER 6.75"DIA 10T-750 8 M14138 1343.00

IMPELLER 900 FM# LV4455275104 2660 F 8 M14160 652.00

IMPELLER 7.32"DIA 10T-900 8 M14139 1343.00

IMPELLER 7.00"DIA 10T-900 8 M14140 1343.00

IMPELLER 1200 FM# LV4455276104 2660 8 M14161 652.00

IMPELLER 7.32"DIA 10T-1200 8 M14141 852.00

IMPELLER 6.94"DIA 10T-1200 8 M14142 800.00

Impellers

10T-750, 10T-900, 10T-1200

Suction & Misc. Components

Discharge Components

Intermediate Components (Bowl Assembly)

Shafts


Category AGE

10T Series

10T-1600, 10T-1900

Description ITEM NO. Catalog Number LIST PRICE

BRACKET,10T-750,900,1200 W/6" MOTOR 71A M14612 $1,511.00

BRACKET FOR 10T W/1.5"SHAFT,8"MTR 71B M14090 1,215.00

WEAR RING 10T FM# LV6775170208 9649 213 M14166 87.00

BEARING, BRACKET FOR SUB TURBINE W/1-1/2 39C M08375 135.00

COLLAR,SAND 10O4 1-1/2 ID 932BRZ 1-1/2 I 40 S34223 305.00


SCREEN, SUCTION 1/2 IN NO. 18 X 12 IN X 209 M06684 215.00

COUPLING-1" SHAFT 70 387630500 74.00

Coupling splined 1.5" shaft Franklin 70 L06905 548.00

GUARD,WIRE 1.88" WIDTH 302SS 17 M10252 185.00

CLAMP,SCREEN 2-13/16 ID - 3-3/4 ID SS 801A S14661 12.35

CLAMP,LEAD GUARD 10SUB TRIDON 620-188 801B M10193 24.35

WASHER, LOCK, SPRING 5/8 S23093 6.17

NAMEPLATE BERKELEY ORANGE M12165PNR 10.98

RIVET,POP 0.093 DIA. X 0.22 LG. M10199 6.17

TAG, SUB TURBINE UPTHRUST ADJUSTMENT M09970 7.54

OWNERS MANUAL REV 6-28-006T SUBS BE215 8.91

DISCHARGE 8"NPT 10T-1600 197 M14094 469.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 6.17


WASHER,THRUST,3.25OD x 1.5IDx.14T 18-8SS 801C M14791 12.35

BOWL 10T-1600 FM# LV1055077 0221 F 199 M14165 459.00

WEAR RING 10T FM# LV6775170208 9649 213 M14166 87.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 6.17

BEARING 10T FM# LV0695065208 9649 F 39B M14167 35.00

COLLET 10T FM# LV2275004107 3080 F 84 M14168 106.00

SHAFT 10T-1600 1STG 18.25" 6"MTR 5 M14671 167.00





IMPELLER 1600 FM# LV4455277104 2660 8 M14162 1,002.00

IMPELLER 7.66"DIA 10T-1600 8 M14143 1,391.00

IMPELLER 7.26"DIA 10T-1600 8 M14144 1,391.00

IMPELLER,10T-1900 FM#LV4455278104 26 8 M14759 1,002.00

IMPELLER, 10T-1900 B-TRIM 7.60" 8 M14760 1,002.00

IMPELLER, 10T-1900 C-TRIM 7.22" 8 M14782 1,002.00

Impellers

Discharge Components

Suction & Misc. Components

Intermediate Components (Bowl Assembly)

Shafts


Motor AGF

Motors

6" Submersible Motors

Pentek® XE-6 6" Submersible Motors

6", Three Phase, 2 pole, 3450 RPM

Catalog Number DescriptionWT. LBS.

Motor Only

WT. LBS.

Motor +

Crate

List

Price

P60A0050A8 PENTEK XE-6 6" 5HP 200V 3PH 60HZ MOTOR 87 115 $2,540

P60A0075A8 PENTEK XE-6 6" 7.5HP 200V 3PH 60HZ MOTOR 97 127 2,930

P60A0100A8 PENTEK XE-6 6" 10HP 200V 3PH 60HZ MOTOR 104 134 3,463







P60A0100A3 PENTEK XE-6 6" 10HP 230V 3PH 60HZ MOTOC 104 134 3,463























Motor AGF

Control Box WSM

Replacement Motor Leads AGH

Motors




Motor Only

WT. LBS.

Motor +

Crate

List

Price






Control Box

WT. LBS.

Control Box

& Package

List

Price

PTKX-5SCB PENTEK CONTROL BOX 6IN 1PH 5HP 30 32 783

PTKX-7SCB PENTEK CONTROL BOX 6IN 1PH 7.5HP 31 33 982

PTKX-10SCB PENTEK CONTROL BOX 6IN 1PH 10HP 32 34 1,433

PTKX-15SCB PENTEK CONTROL BOX 6IN 1PH 15HP 33.5 36 2,012

Replacement Motor Leads

Catalog Number WT. LBS. List

Price

PTKXE6-RMLD-10 6 295

PTKXE6-RMLD-8 10 410

PKG 4x6 670

4" Submersible Accessory

Catalog Number Description List

Price

FMB6006892B03 4X6 MOTOR/PUMP ADAPTER

PENTEK XE MTR LEAD 30-50HP

6", Single Phase, 2 pole, 3450 RPM

NOTE: Pentek XE-6 single phase motors must use the corresponding Pentek control box. Use of any other control box will

void the warranty.

Control Box

Description

PENTEK XE MTR LEAD 5-25HP


Motor AGF

Motors



8", Three Phase, 2 pole, 3450 RPM


Motor Only

WT. LBS.

Motor +

Crate

List Price

P86A0500A4 PENTEK XE-8 8X6 50HP 460V 3PH 60HZ MTR 344 382 $12,315

P86A0600A4 PENTEK XE-8 8X6 60HP 460V 3PH 60HZ MTR 373 423 15,143

P80A0500A4 PENTEK XE-8 8 50HP 460V 3PH 60HZ MOTOR 344 396 14,019













Motor AGF

Control Box AGF

Motors

Hitachi® 6" Submersible Motors

Catalog Number Description WT. LBS. List Price

6HIT2-5-1 HITACHI 6" 5HP 230V 1PH MOTOR 121 $3,062

6HIT2-7-1 HITACHI 6" 7.5HP 230V 1PH MOTOR 134 3,599

6HIT2-10-1 HITACHI 6" 10HP 230V 1PH MOTOR 139 4,034


HIT-5CBD HITACHI CONTROL BOX 5HP 1PH DELUXE 14 1,248

HIT-7.5CBD HITACHI CONTROL BOX 7.5HP 1PH DELUXE 14 1,467



























86HIT2-50-4 HITACHI 8" X 6" 50HP 460V 3PH MOTOR** 231 13,062

86HIT2-60-4 HITACHI 8" X 6" 60HP 460V 3PH MOTOR** 238 16,066

** Models are 8" diameter motors with 6" pump connection.

6", Single Phase, 230 Volt, 2 pole, 3600 RPM

Deluxe Control Box*

* Includes magnetic contactor. NOTE: Hitachi single phase motors must use a Hitachi control box. Use of any

other control box will void the warranty.

6", Three Phase, 200, 230 & 460 Volt, 2 pole, 3600 RPM


Motor AGF

Control Box AGF

Replacement Motor Leads AGH

Motors


8HIT2-40-4 HITACHI 8" 40HP 460V 3PH MOTOR 331 $12,968










8HIT4-7-4 HITACHI 8" 1800RPM 7.5HP 460V 3PH 360 RTF

8HIT4-10-4 HITACHI 8" 1800RPM 10HP 460V 3PH 360 RTF



8HIT4-25-4 HITACHI 8" 1800RPM 25HP 460V 3PH 410 36,887











** Models are 8" diameter motors with 6" pump connection.

All other brand or product names are trademarks or registered trademarks of Pentair.

Hitachi® 6" Submersible Motors


S33591 138

S33592 138

HIT-RMLD-10 608

HIT-RMLD-8 735

All other brand or product names are trademarks or registered trademarks of Pentair.

Voltage Plug for converting between 230 and 460 Volts.

HITACHI MTR LEAD 5-25 HP AND 40 HP

HITACHI MTR LEAD 30, 50, 60 HP

Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.

For 30 HP and lower 6" motors only.

VOLTAGE PLUG 5-30HP 230 VOLT HITACHI

VOLTAGE PLUG 5-30HP 460 VOLT HITACHI

Replacement Motor Leads

6" Canned motors only. 150" Lead Lengths

Hitachi® 8"-14" Submersible Motors

8" – 12", Three Phase, 460 Volt, 2 pole, 3600 rpm

8" – 14", Three Phase, 460 Volt, 4 pole, 1800 rpm

Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.


293 Wright Street | Delavan, WI 53115 | Ph: 888.237.5353 | Orders Fax: 800.321.8793 | pentair.com

B13330BK-P (06-24-2021) ©2021 Pentair. All Rights Reserved.

All indicated Pentair trademarks and logos are property of Pentair. Third party registered and unregistered trademarks and logos are the property of their respective owners. Because we

are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.

u.s. july 2021 list prices

Documents