us epa, pesticide product label, bio-protect am …...2011/08/04 · c krk consulting llc 5807...

PLEASE NOTE

9

This image contains more than one labelapproved for this product on this date.

UNITf^STATES iNVJROrtMEHtAL PROTECTION AGENCY

Kevin KutcelAgent for PureShield, Inc.KRK Consulting, LLC5807 Churchill WayMedina, OH 44256

SUBJECT: Bio-Protect AM 50EPA Registration Number: 87583-3Application Date: July 1, 2011Receipt Date: July 5, 2011

? ' It AU6 -4 2015 I

Dear Mr. Kutcel:

This letter acknowledges receipt of the notification identified above submitted underprovisions of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) as amended andPR Notice 98-10.

• Propose the additional brand name: Bio-Protect RTU.

Based on a review of the submitted information, this notification is acceptable. Yourproposed additional brand name will be made part of the record for this file.

General Comments

Should you have any questions concerning this letter, please contact Emilia Oiguenblikat (703) 347-0109 or Velma Noble at (703) 308,6233.

Sincerely,

Velma NobleProduct Manager (3 1 )Regulatory Management Branch IAntimicrobials Division (751 OP)

CONCURRENCES

SYMBOL. ^

SURNAME )

SATE }

ER* Form 1320-1A (1/90) Printed on Recycled Paper OFFICIAL FILE COPY

Hernia nud Irutrvctfont on revene kffon compi form. form Approved. No. 2070-0060Print Form

&EPAUnited States

Environmental Protection AgencyWashington, DC 20460

X

RegistrationAmendmentOther

OPP Identifier Number

Application for Pesticide - Section I1. Company/Product NumberPureShield Inc. 787583-3

4. Company/Product (Name)PureShield Inc. / Bio-Protect AM50

2. EPA Product ManagerVelma Noble

PM*31

3. Proposed Classification

X None Restricted

5. Name and Address of Applicant (Include ZIP Code!

PureShield Inc.1445 Jupiter Park Drive, #11Jupiter, FL 33458

6. Expedited Review. In accordance with FIFRA Section 3(c)(3)(b)(i), my product is similar or identical in composition and labelingto:EPA Rep. No. • •

DCheck if this is a new address Product Name

Section - II

I I Amendment - Explain below.

I I Resubmission in response to Agency letter dated.

|X I Notification - Explain below.

n Final printed labels in response toAgency letter dated"Me Too" Application.

Other - Explain below.

Explanation: Use additional page(s) if necessary. (For section I and Section II.)Please accept the alternate brand name for Reg. No. 87583-3 of "Bio-Protect RTU" per PR Notice 98-10. Please see attached cover letterfor required compliance statement regarding this PR Notice. "V

Section - III1. Material This Product Win Be Packaged In:

Child-Resistant Packaging

SYes'

No

* Certification mustbe submitted

If "Yes" No. perUnit Packaging wot. container

Water Soluble Packaging

Yes

NoX

If "Yes"Package wgt

No. percontainer

X

2. Type of Container

MetalPlasticGlassPaperOther (Specify)

3. Location of Net Contents Information

|X| Label I I Container

S. Location of Label DirectionsOn LabelOn Labeling accompanying product

6. Manner in Which Label is Affixed to ProductPaper gluedStenciled

Section - IV1. Contact Point (Complete items directly below for identification of individual to be contacted, if necessary, to process this application.)

NameKevin Kutcel

TitleConsultant

Telephone No. (Include Area Code)440-263-7305" t

Certification I *I certify that the statements I have made on this form and all attachments thereto are true, accurate and correlate.I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonment or c 'both under applicable law. . c '

2. Signatu

4. Typed Name

Kevin Kutcel

3. Title

Consultant

5. Data

7/1/2011

6. Date ApplicationReceived

(Stamped)r C I.

<• I. C

EPA Form 8570-1 (Rev. 8-94) Previous editions are obsolete. White - EPA File Copy (original) Yellow - Applicant Copy

cKRK Consulting LLC

5807 Churchill WayMedina, OH 44256Tel: 440-263-7305

E-mail: [email protected]

July 1,2011

US EPA (NOTIF)Office of Pesticide Programs ARoom S-4900, One Potomac Yard :

2777 South Crystal DriveArlington, VA 22202-4501 ,.,.

Subject: PR Notice 1998-10 Notification for ABN (EPA No. 87583-3)

Please accept the attached 3 copies of the revised label for Reg. No. 87583-3 with the alternatebrand name "Bio-Protect RTU" per PR Notice 1998-10.

Attached is EPA Form 8570-1 regarding this notification as required in PR Notice 1998-10.This notification is consistent with the guidance in PR Notice 1998-10 and the requirements ofEPA's regulations at 40 CFR 156.46,156.140,156.144, 156,146 and 156.156 and no otherchanges have been made to the labeling or the Confidential Statement of Formula for thisproduct. I understand this it is a violation of 18 U.S.C. Sec. 1001 to willfully make any falsestatement to EPA. I further understand that if the amended label is not consistent with therequirements of PR Notice 98-10 and CFR 156.46, this product may be in violation of FIFRAand I may be subject to enforcement action and penalties under sections 12 and 14 of FIFRA.

Please note that KRK Consulting LLC is the authorized agent handling all correspondence forPureShield Inc. and therefore all responses should be directed to the contact information on theletterhead above.

Best Regards

Levin R. Kutcel,Agent for PureShield Inc.

Bio-ProteGlRIUActive Ingredient: 3-(trimethoxysilyl)propyldimethyloctadecyl ammonium chloride 0.50%Other Ingredients: 99.50%TOTALINGREDIENTS: ../.. 100.00%

KEEP OUT OF REACH OF CHILDREN

CAUTIONEPA Reg. No. 87583-3 EPA EST. No. xxxxx-xx-xxx

NET CONTENTS: 2,4,6,8,12,16,32 oz or 1,5,30,55,275 Gallons

FIRST AID

Hold eye open and rinse slowly and gently with water for 15-20 minutes.Remove contact lenses, if present, after the first 5 minutes, then continuerinsing.Call poison control center or doctor for treatment advice.

IF IN EYES:

IF INHALED: • Move person to fresh air.• If person is not breathing, call 911 or an ambulance, and then give

artificial respiration, preferably mouth-to-mouth, if possible.• Call a poison control center or doctor for further treatment advice.

IF ON SKIN: Take off contaminated clothing.Rinse skin immediately with plenty of water for 15-20 minutes.Call a poison control center or doctor for treatment advice.

IFSWALLOWED:

Call a poison control center or doctor immediately for treatment advice.Have person sip a glass of water if able to swallow.Do not induce vomiting unless told to do so by a poison control center ordoctor.Do not give anything by mouth to an unconscious person.

Provides an invisible microbiostatic coating to inhibit the growth of odor causing bacteria, bacteriawhich cause staining and discoloration, fungi (mold and mildew), and algae. Thiscj5r«qduct does dotprotect users or others against food-borne or disease-causing bacteria. ' c c c

PureShield, 1445 Jupiter Park Drive, Suite 11, Jupiter, FL 3345 8 e c L

c c c c: t L

c L L

c cc c c c c

PRECAUTIONARY STATEMENTSHAZARDS TO HUMANS AND DOMESTIC ANIMALS

CAUTION: Harmful if swallowed, absorbed through the skin, or inhaled. Causes moderate eyeirritation. Avoid contact with eyes, skin and clothing. Wear protective eyewear (goggles or faceshield) and rubber gloves. Wash thoroughly with soap and water after handling and before eating,drinking, chewing gum, using tobacco or using the toilet.

ENVIRONMENTAL HAZARDS

Commercial and industrial uses: This pesticide is toxic to fish. Do not discharge effluentcontaining this product into lakes, streams, ponds, estuaries, oceans, or other waters unless inaccordance with the requirements of a National Pollutant Discharge Elimination System (NPDES)permit and the permitting authority has been notified in writing prior to discharge. Do not dischargeeffluent containing this product to sewer systems without previously notifying the local sewagetreatment plant authority. For guidance, contact your State Water Board or Regional Office of theEPA. :V

De-activation may be required during clean up if a spill occurs. De-activation of Bio-Protect AM50can be achieved by the addition of anionic surfactant (such as soap, sulfonates, sulfates) in quantityequivalent to that of Bio-Protect AM50.

Residential use: This pesticide is toxic to fish. Do riot apply directly to water. Do not contaminatewater by cleaning of equipment or disposal of pesticide.

DIRECTIONS FOR USE

Approved commercial and Industrial Applications

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Wearprotective eyewear (goggles or face shield) and gloves when using this product. Dry treated areasand articles such as clothing before use. Remove children and pets from treated area until completelydry.

AM-50 can be applied to organic or inorganic substrates by brushing, dipping, padding, soaking,spraying, fogging, or by using foam finishing techniques.

Dry substrates at temperatures from ambient to a maximum of 160° C (320° F) to effect completec

condensation of silanol groups and to remove water, solvents and/or traces of mgtb,a.nQl from c ̂ ;;hydrolysis. Optimum application and drying conditions, such as time and tempelature^ should bedetermined for each application before use. If necessary, reapply AM-50 every tjygejponths or whenodor, staining and discoloration due to bacteria, mold stains, and mildew stains retarni

c C cC C C C C t L C

AM-50 when used as a concrete additive is added directly concrete preparation. Use 60 fluid ouncesper cubic feet of concrete. Addition of AM-50 reduces deterioration of sewer pipes and manjbqle&byinhibiting microbiologically induced corrosion.

Approved commercial and industrial applications

The active ingredient in AM-50 is effective against odor causing bacteria, bacteria which causestaining and discoloration, fungi (mold and mildew) and algae as a static agent. AM-50 can be usedas a final bacteriostatic finish on the following items to impart bacteriostatic/fungistatic (mold andmildew) and algaestatic activity.

- Air Filters for furnaces, air-conditioners, air purification devices, automobiles,recirculating air handling systems. {Air filters/materialsAquarium filter materialBed sheets, blankets, and bedspreads ,Buffer pads (abrasive and polishing)Carpets and draperiesConcrete additive for sewer pipes, manholes^and concrete sewer structures; not to be used intreatment of storm drains j,

- Fiberfill for upholstery, sleeping bags, apparel, where the fiber is cotton, natural down,nylon, polyester, rayon, or wool

- Fiberglass duct board- Fire hose fabric

Humidifier belts- Mattress pads and ticking -;•"'• ' ."-- ' ' , .

Men's underwear and outerwear- Non-woven disposable diapers- Non-woven polyester- Outerwear apparel (jackets, sweaters, sweatshirts, coats, raincoats, overcoats, jerseys,

ponchos)Polyurethane and cellulose foam for household, industrial, and institutional sponges andmops

- Polyurethane and polyethylene foam, when coveredPolyurethane foam for packaging and cushioning in non-food contact applicationsPolyurethane foam used as a growth medium for non-food crops and plantsPre-moistened towelettes and tissue wipes (these do not impart pesticidal properties)Roofing materials - defined as shingles, roofing granules, wood shakes, felt, stone andsynthetic overcoats

- Sand bags, tents, tarpaulins, wood, sails, and ropesAthletic and casual socksShoe insoles

- Shower curtainsc c C c

- Socks comprised of nylon, nylon/orlon, cotton/nylon, linen/Lycra, acrylic/polypropylerfe/cnylon, Lycra, wood/silk/nylon/Lycra and wool/acrylic/nylon/Lyrca <j <

- Throw rugs c c t c

Toweling made of 100 percent cotton, 100 percent polyester, and blends of the two fibers c

Toilet tank and seat covers c c L c c c

c L c c

- Umbrellas C cL<^ c

- Upholstery made of acetates, acrylics, cotton, fiberglass, nylon, polyester, polyethyigng, < t

polyolefins, polyptopylene, rayon, spandex, vinyl, wool

- Vacuum cleaner bags and filtersVinyl paper-wallpaper for non-food contact surfacesDisposable wiping cloths that can be used for multiple purposes such as dusting or washingfurniture, cars, walls, windows, floors, appliances, dishes, counter tops; the wiping cloths donot impart pesticide propertiesWoman's hosieryWomen's intimate apparel

DIRECTIONS FOR USE

Approved commercial appliances used in homes, offices, automobiles and institutions e.g.,schools, hospitals, daycare centers, churches, correctional facilities

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Wearprotective eyewear (goggles and face shield) and gjpyes when using this product. Dry treated areasand articles such as clothing before use. Remove children and pets from treated area until completelydry. Clean surfaces prior to application. ;;,,,..

The active ingredient in AM-50 is effective against odor causing bacteria, bacteria which causestaining and discoloration, fungi (mold and mildew) and algae as a static agent. AM-50 can be usedas a final bacteriostatic finish on the following items to impart bacteriostatic/fungistatic (mold andmildew) and algaestatic activity. *•• . .

- Air Filters for furnaces, air-conditioners, air purification devices, automobiles,recirculating air handling systems.

- Air filters/materials- Aquarium filter material- Bed sheets, blankets, and bedspreads- Buffer pads (abrasive and polishing)- Carpets and draperies- Fiberfill for upholstery, sleeping bags, apparel, where the fiber is cotton, natural down,

nylon, polyester, rayon, or woolFiberglass duct board

- Fire hose fabric- Humidifier belts- Mattress pads and ticking

Men's underwear and outerwearNon-woven disposable diapers

- Non-woven polyester- Outerwear apparel (jackets, sweaters, sweatshirts, coats, raincoats, overcoats, jerseys^ c

ponchos) G G C 6 C C '' \i|- Polyurethane and cellulose foam for household, industrial, and institutional sponges and

mops t c c c c cPolyurethane and polyethylene foam, when covered c oPolyurethane foam for packaging and cushioning in non-food contact appjjeajtions ° c c ° £

- Polyurethane foam used as a growth medium for non-food crops and plants c c- Pre-moistened towelettes and tissue wipes (these do not impart pesticidat properties^ c c (£ c

c cRoofing materials - defined as shingles, roofing granules, wood shakes, felt, stone andsynthetic overcoats

- Sand bags, tents, tarpaulins, wood, sails, and ropesAthletic and casual socksShoe insolesShower curtains

- Socks comprised of nylon, nylon/orlon, cotton/nylon, linen/Lycra, acrylic/polypropylene,nylon, Lycra, wood/silk/riylon/Lycra and wobl/acrylic/nylon/LyrcaThrow rugs ^ .Toweling made of 100 percent cotton, 100 percent polyester, and blends of the two fibersToilet tank and seat covers . . _,Umbrellas ;

- Upholstery made of acetates, acrylics, cotton, fiberglass, nylon, polyester, polyethyiene,polyolefins, polyptopylene, rayon, spandex, vinyl, wool

- Vacuum cleaner bags and filters s- Vinyl paper-wallpaper for non-food contact surfaces- Disposable wiping cloths that can be used for multiple purposes such as dusting or washing

furniture, cars, walls, windows, floors, appliances, dishes, counter tops; the wiping cloths donot impart pesticide propertiesWoman's hosieryWomen' s intimate apparel -

For Pump Spray Application: Using pump sprayer, spray entire area 4"-6"s from the surfacemaking sure the surface is completely covered. Apply and then let stand until dry or let stand 3minutes and wipe dry with cloth of sponge. If spotting occurs, wipe with moist cloth or sponge. Testfor staining and color-fastness of fabrics and carpets by treating and drying a small, concealed areaprior to application. AM-50 treats approximately 200 square feet per diluted gallon of water. Whentreating coarser substrates, more AM-50 may be required due to absorption. A fan may be used toassist in drying carpet.For Commercial Spray Application: For commercial application equipment (i.e. carpet/upholsterysteamers, rotary jet extraction cleaners, and pressure sprayers) apply and then let stand until dry orlet stand 3 minutes and wipe dry with cloth or sponge. If spotting occurs, wipe with moist cloth orsponge. Test for staining and color-fastness of fabrics and carpets by treating and drying a small,concealed area prior to application. AM-50 treats approximately 200 square feet per diluted gallon ofwater. When treating coarser substrates, more AM-50 may be required due to absorption. Dry carpetareas and surfaces before re-entry and dry articles before use. A fan may be used to assist in dryingcarpet.For Dipping/Soaking Application: Use appropriate sized wash basin or tub for dipping/soaking theitem you are treating. Use enough AM-50 solution to completely submerge item. Completelysubmerge item in solution for 3 minutes. Remove item and dry. Test for staining and color-fastnessof fabrics by treating and drying a small, concealed area prior to application. Dqnpjrguse solutipjiafter dipping/soaking. c c c c

c c c c c c

The substrate can be dried at room temperature or at temperatures to a maximum cf 160°C (320°F),for example in a clothes dryer. Remove excess liquid before attempting to dry iij ̂ cclpthes dry.ei1. £fnecessary, reapply AM-50 every three months or when odor, staining and discoloratidri due to c.bacteria, mold stains, and mildew stains return.

DIRECTIONS FOR USE

For residential applications

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.Wear protective eyewear (goggles or face shield) and gloves when using this product. Drytreated areas and articles such as clothing before use. Remove children and pets from treated areauntil completely dry. Clean surfaces prior to application.

Approved residential uses

The active ingredient in AM-50 is effective against odor-causing bacteria, bacteria which causestaining and discoloration, fungi (mold and mildew), and algae as a static agent.

Pestcontrolled

Bed sheets, blankets,bedspreads, curtains,draperies (washableonly), underwear,socks, intimateapparel, hosiery,throw rugs, toweling,toilet tank covers,shower curtains, shoeinsoles, outerwearapparel (jackets,sweaters, sweatshirts,coats, raincoats,overcoats, jerseys,ponchos). AM-50can be applied tofabrics made ofacetates, acrylics,cotton, fiberglass,linen, Lycra, nylon,orlon, polyester,polyethylene,polyolefin,polypropylene, rayon,silk, spandex, vinyl,and wool.

Odor-causingbacteria,bacteriawhich causestaining anddiscoloration,and fungi(mold andmildew)

Method of Application

DIP/SOAK: Use appropriate sized wash basin or tub fordipping/soaking the item you are treating. Use enough AM-50 solution to completely submerge item. Keep item insolution for 3 minutes. Remove item and wring excess liquidfrom treated item: For larger items (e.g. bedspreads, curtains,draperies), place in washing machine on spin cycle to aid inthe removal of excess liquid. Test staining and color-fastnessof fabric and carpets by treating and drying a smallconcealed area prior to application. Do not reuse solutionafter dipping/soaking. Dry treated articles before use.Substrates can be hang-dried at room temperature or attemperatures to a maximum of 160°C (320°F); (for example,in a clothes dryer). If necessary, reapply AM-50 every threemonths or when odor, staining and discoloration due tobacteria, mold stains, and mildew stains return.

SPRAY: Clean surface prior to application. Using a triggerpump sprayer or pressure sprayer, spray the entire surfacearea 4"-6" from the surface, making sure the surface iscompletely covered. Let stand until dry or let stand 3 minutesand wipe dry with cloth or sponge. If spotting occurs, wipewith moist cloth or sponge. Test staining and color-fastnessof fabric by treating and drying a small copppaied area pfrj.<§rto application. If necessary, reapply AM-SO every three«months or when odor, staining and discoloration due tobacteria, mold stains, and mildew stains return.^

7 * C C C C C L

t. L C C t L

Air filters and airfilter material for:• Furnaces, airconditioners• Air purificationsystems• Automobiles• Recalculating airhandling systems• Vacuum cleanerfilters• Aquariums

Carpeting

Pestcontrolled

Odor-causingbacteria,bacteriawhich causestaining anddiscoloration,fungi (moldand mildew),and algae

Pestcontrolled



SPRAY: When treating filters, remove filter from the unit.Using a trigger pump sprayer or pressure sprayer, spray theentire surface area 4"-6" from the surface, making sure thesurface is completely covered. Apply and then let stand untildry. If necessary, reapply AM-50 every three months orwhen odor, staining and discoloration due to bacteria, moldstains, mildew stains, and algae stains return.


SPRAY: Apply to clean carpet surface. Using a triggerpump sprayer or pressure sprayer, spray the entire surfacearea 4"-6" from the surface, making sure the surface iscompletely covered. For rotary jet extraction cleaners andcarpet steamers, add the diluted AM-50 solution directly tothe cleaning tank, then operate the equipment in accordancewith manufacturer's instructions. Apply and then let standuntil dry. Test staining and color-fastness of carpets bytreating and drying a small concealed area prior toapplication. AM-50 treats approximately 200 square feet pergallon (50 square feet per squart). When treating coarsersubstrates (e.g., wool carpeting), more AM-50 may berequired due to absorption. Dry carpet areas and surfacesbefore re-entry. A fan may be used to assist in dryingcarpeting. Remove children and pets from treated area untilcompletely dried. If necessary, reapply AM-50 every threemonths or when odor, staining and discoloration due tobacteria, mold stains, and mildew stains return.

c c o e c- c-c c. cc c c

c c c c c cc tc c

t, c

C C I. C C

c c c cC (.

C C c

c \\rt\\\

Mattress pad andmattress ticking andupholstery composedof acetates, acrylics,cotton, fiberglass,nylon, polyester,polyethylene,polyolefin,polypropylene, rayon,spandex, vinyl, wool;fiberfill to be used inupholstery, sleepingbags, apparel, wherethe fiber is cotton,natural down, nylon,rayon, or wool

Tents, tarpaulins,wood, sails, ropes.

[ Pestcontrolled


[ Pestcontrolled


Pest


SPRAY: Clean surfaces prior to application. Using a triggerpump sprayer spray the entire surface area 4"-6" from thesurface, making sure the surface is completely covered.Apply and then let stand until dry or let stand 3 minutes andwipe dry with cloth or sponge. If spotting occurs, wipe withmoist cloth or sponge. Test staining and color-fastness offabric by treating and drying a small concealed area prior toapplication. When applying to mattress pads and ticking donot soak. Remove children and pets from treated area untilcompletely dried. If necessary, reapply AM-50 every threemonths or when odor, staining and discoloration due tobacteria, mold stains, and mildew stains return.


SPRAY: Clean surface prior to application. Using a triggerpump sprayer or pressure sprayer, spray the entire surfacearea 4"-6" from the surface, making sure the surface iscompletely covered. Let stand until dry or let stand 3 minutesand wipe dry with cloth or sponge. If spotting occurs, wipewith moist cloth or sponge. Test staining and color-fastnessof fabric by treating and drying a small concealed area priorto application. If necessary, reapply AM-50 every threemonths or when odor, staining and discoloration due tobacteria, mold stains, mildew stains, and algae stains return.

DIP/SOAK: Use appropriate sized wash basin or tub fordipping/soaking the item you are treating. Use enough AM-50 solution to completely submerge item. Keep item insolution for 3 minutes. Remove item and wring excessliquid. Do not reuse solution after dipping/soaking. Drytreated articles before use. Substrates can be hang-dried atroom temperature or at temperatures to a maximum of 160°C(320°F); (for example, in a clothes dryer). Remove excess c

liquid before attempting to dry in a clothes dryer. If c c cnecessary, reapply AM-50 every three menths pr when ©dor,staining and discoloration due to bacteria; .moid stains,mildew stains, and algae stains return. c

c c * ,c t t

c c t . c c c t. cc cc c c

c c c c ct tt C C C t (.


controlledRoofing materials(such as shingles,roofing granules,wood shakes, felt,stone, syntheticovercoats)

Buffer pads(polishing andabrasive),polyurethane andcellulose forhousehold spongesand mops, vacuumcleaner bags,umbrellas, casualshoes, athletic shoes

Tubs, glazed tiles,vanity tops, showercurtains, showerstalls (areas), sinks,washable walls, wallpaper for non-foodcontact, floors,window sills,cabinets, garbagecans, appliances,refrigerators(exterior), fiberglass,Formica, glazed tiles,glazed porcelain,synthetic marble,plastic, vinyl


Pestcontrolled


Pestcontrolled


SPRAY: Make sure the roof is clean prior to application.Using a pressure sprayer, spray the entire surface area 6"-12"from the surface, making sure the surface is completelycovered. After applying AM-50, let stand until dry. AM-50treats approximately 200 square feet of roofing per gallon(50 square feet per quart). If necessary, reapply AM-50 everythree months or when odor, staining and discoloration due tobacteria, mold stains, mildew stains, and algae stains return.


SPRAY: Clean surface prior to application. Using a triggerpump sprayer, or pressure sprayer, spray the entire surfacearea 4"-6" from.the surface, making sure the surface iscompletely covered. Let stand until dry or let stand 3 minutesand wipe dry with cloth or sponge. If spotting occurs, wipewith moist cloth or sponge. If necessary, reapply AM-50every three months or when odor, staining and discolorationdue to bacteria, mold stains, and mildew stains return.


SPRAY: Using a trigger pump sprayer, spray the entiresurface area 4"-6" from the surface, making sure the surfaceis completely covered. Let stand until dry or let stand 3minutes and wipe dry with cloth or sponge. If spottingoccurs, wipe with moist cloth or sponge. If necessary,reapply AM-50 every three months or when odor, stainingand discoloration due to bacteria, mold stains, and mildewstains return.

c q G t c- C

C t tt C €-

C C C C C

C Cr, c

'. C C C (- t

Imparts microbiostatic properties.Use on carpet and upholstery to inhibit odor causing bacteria, bacteria which cause staining anddiscoloration, and fungi (mold and mildew).Unscented.Use on carpet and upholstery to inhibit the growth of odor causing bacteria.Use on carpet and upholstery to inhibit the growth of bacteria which cause staining anddiscoloration.Use on carpet and upholstery to inhibit the growth of fungi (mold and mildew).Use on carpet and upholstery to inhibit the growth: of odor causing bacteria, bacteria which causestaining and discoloration, and fungi (mold and mildew).Provides an invisible microbiostatic coating to inhibit the growth of odor causing bacteria.Provides an invisible microbiostatic coating to inhibit the growth of bacteria which cause stainingand discoloration.Provides an invisible microbiostatic coating to inhibit the growth of fungi (mold and mildew).Provides an invisible microbiostatic coating to inhibit the growth of algae.Provides an invisible microbiostatic coating to inhibit^the growth of odor causing bacteria, bacteriawhich cause staining and discoloration, fungi (mold and mildew), and algae.Prevents deterioration caused by bacteria and fungi (mold and mildew).Inhibits deterioration caused by bacteria.Resists development of microbial odors.Resists development of stains and discoloration due to bacteria.Resists development of stains due to fungi (mold and mildew).Resists stains due to algae.Resists development of microbial odors, stains and discoloration due to bacteria, fungi (mold andmildew), and algae.Provides/creates an invisible barrier to inhibit the growth of odor causing bacteria.Provides/creates an invisible barrier to inhibit the growth of bacteria which cause staining anddiscoloration.Provides/creates an invisible barrier to inhibit the growth of fungi (mold and mildew).Provides/creates an invisible barrier to inhibit the growth of algae.Provides/creates an invisible barrier to inhibit the growth of odor causing bacteria, bacteria whichcause staining and discoloration, fungi (mold and mildew), and algae.Inhibits the growth of odor causing bacteria between cleanings.Inhibits the growth of bacteria which cause staining and discoloration between cleanings.Inhibits the growth of fungi (mold and mildew) between cleanings.Inhibits the growth of algae between cleanings.Inhibits the growth of odor causing bacteria which cause staining and discoloration, fungi (mold andmildew), and algae between cleanings.Mold, mildew, odor protector and inhibitor.AM-50 is an antimicrobial agent effective against odor causing bacteria. c. e c c_ t e

c t j

AM-50 is an antimicrobial agent effective against bacteria which cause staining£an<5 discoloration.AM-50 is an antimicrobial agent effective against fungi (mold and mildew). It c c c ̂AM-50 is an antimicrobial agent effective against algae. c SAM-50, an antimicrobial agent, controls the source of odors on surfaces in the hqmV, in the^ l ^ L [bathroom, in the kitchen. c c cBacteriostatic, fungistatic (mold and mildew), algaestatic.

10

AM-50, and antimicrobial agent, inhibits smelly odors caused by mold and mildew that can grow ineven the cleanest of homes.AM-50, an antimicrobial agent, inhibits the growth of odor causing bacteria.Effective on hard non-porous washable bathroom and kitchen surfaces and fixtures around the home.Effective on modern hard non-porous washable surfaces made of fiberglass, glazed porcelain,Formica, stainless steel, synthetic marble.

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage and disposal.

Pesticide Storage: Store in original, tightly closed containers below 30°C (86°F) and above 0°C(32°F) in a secure area inaccessible to children and away from food or feed.

For 5 gallons or less: -srContainer Disposal: Nonrefillable container. Do not reuse or refill this container. Securelywrap original container in several layers of newspaper and discard in trash or offer for recyclingif available.

Containers larger than 5 gallonsContainer Disposal: Nonrefillable container. Do not reuse or refill this container. Triple rinse(or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contentsinto application equipment or a mix tank. Then offer for recycling if available or puncture anddispose of in a sanitary landfill, or by incineration. .

FOR MORE INFORMATION CONCERNING THIS PRODUCT, PLEASE CONSULT THEMATERIAL SAFETY DATA SHEET (MSDS). THE MSDS CAN BE OBTAINED BY WRITINGINTERNATIONAL DISTRIBUTION ALLIANCE AT 1445 JUPITER PARK DRIVE, SUITE 11,JUPITER, FL 33458.

IMPORTANT: WARRANTY AND DISCLAIMER INFORMATIONInternational Distribution Alliance warrants that the product conforms to its chemical descriptionand is reasonably fit for the purposes stated in this bulletin when in accordance with directions undernormal conditions of use; but this warranty of fitness for a particular purpose does not extend to theuse of this product contrary to bulletin instructions, or under abnormal conditions, or underconditions not reasonably foreseeable to the seller, and buyer assumes the risk of any such use.INTERNATIONAL DISTRIBUTION ALLIANCE DA SPECIFICALLY DISCLAIMS ANYOTHER EXPRESSED OR IMPLIED WARRANTY, INCLUDING THE WARM.NJY OFMERCHANTABILITY. t e c

<

C C C C C LC I- C

J C t. C C C C I.t. cc c c

c c tec

11

NEXT

LABEL

UNJTE^TATES EJwRONMENTAL PROTECTION-AGENCY

Kevin KutcelAgent for PureShield, Inc.KRK Consulting, LLC5807 Churchill WayMedina, OH 44256

SUBJECT: Bio-Protect AM 50EPA Registration Number: 87583-3Application Date: July 12,2011Receipt Date: July 15, 2011 J'

Dear Mr. Kutcel:

This letter acknowledges receipt of the notification identified above submitted underprovisions of the Federal Insecticide, Fungicide, arid Rodenticide Act (FIFRA) as amended andPR Notice 98-10. :.

• Propose the additional brand name: Black by Trophy Quest.

Based on a review of the submitted information, this notification is acceptable. "GearGuard" and "Microbiostatic Agent" are acceptable claims for this product. In future notificationsclearly highlight all new changes made on the label.

General Comments

Should you have any questions concerning this letter, please contact Emilia Oiguenblikat (703) 347-0109 or VelmaNoble at (703) 308-6233.

Sincerely,

VelmaNobleProduct Manager (31)Regulatory Management Branch IAntimicrobials Division (751 OP)

eOHCURREHOK

SYMBOL }

SURNAME )

OATE )

ERA Form 1320-1A (1/90) Printed on Recycled Paper OFFICIAL FILE COPY

Ptetse md instruction* on reverse before compfef' form. Form Approved. No. 2070-OO60Print Form,.

&EPAUK—/d States

Environmental Protection AgencyWashington, DC 20460

V.,yistrationAmendmentOther

OPP Identifier Number

Application for Pesticide - Section I1. Company/Product NumberPureShield Inc./87583-3

4. Company/Product (Name)PureShiefd Inc. / Bio-Protect AM50

2. EPA Product ManagerVelma Noble

PM*31

3. Proposed Classification

X None Restricted

5. Name and Address of Applicant llnclude ZIP Code)

PureShield Inc.1445 Jupiter Park Drive, #11Jupiter, FL 33458

6. Expedited Review. In accordance with FIFRA Section 3(c)(3)(b)(i), my product is similar or identical in composition and labelingto:

EPA Reg. No.

DCheck if this is a new address Product Name

Section - II

I I Amendment - Explain below.

I I Resubmission in response to Agency letter dated.

X I Notification - Explain below.€3

Final printed labels in response toAgency letter dated"Me Too" Application.

Other - Explain below.

Explanation: Use additional page(s) if necessary. (For section I and Section II.)Please accept the alternate brand name for Reg. No. 87583-3 of "Black by Trophy Quest" per PR Notice 98-10. Please see attached coverletter for required compliance statement regarding this PR Notice. .f

Section - III1. Material This Product Will Be Packaged In:

Child-Resistant Packaging

Yes*

No

* Certification mustbe submitted

Unit Packaging

Yes

No

If -Yes" No. perUnit Packaging wgt. container

Water Soluble Packaging

Yes

No

If "Yes*Package wgt

No. percontainer

2. Type of Container

MetalPlasticGlassPaperOther (Specify) _

3. Location of Net Contents Information

|Xj Label \ \ Container

4. Size(s) Retail Container 5. Location of Label DirectionsOn LabelOn Labeling accompanying product

6. Manner in Which Label is Affixed to Product LithographPaper gluedStenciled

LJ OthM

Section - IV1. Contact Point (Complete items directly below for identification of individual to be contacted, if necessary, to process this application.)

NameKevin Kutcel

TitleConsultant

e No. (Inctude Area Code)44&-163-7305 t-

Certrfication c c c o c jI certify that the statements I have made on this form and all attachments thereto are true, accurate and compie*e.c

I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonmen^c", c c

both under applicable law. '; %

2. Signature

4. Typed Name

Kevin Kutcel

3. Title

Consultant

5. Date

7/12/2011

6. jOefe" Application

c c c0 'JStamped)

v. v

KRK Consulting LLC5807 Churchill WayMedina, OH 44256Tel: 440-263-7305

E-mail: [email protected]

July 12, 2011

US EPA (NOTIF)Office of Pesticide Programs ^:

Room S-4900, One Potomac Yard , •2777 South Crystal DriveArlington, VA 22202-4501 -,,

Subject: PR Notice 1998-10 Notification for ABN (EPA No. 87583-3)

Please accept the attached 3 copies of the revised label for Reg. No. 87583-3 with the alternatebrand name "Black by Trophy Quest" per PR Notice 1998-10.

Attached is EPA Form 8570-1 regarding this notification as required in PR Notice 1998-10.This notification is consistent with the guidance in PR Notice 1998-10 and the requirements ofEPA's regulations at 40 CFR 156.46, 156.140, 156.144, 156,146 and 156.156 and no otherchanges have been made to the labeling or the Confidential Statement of Formula for thisproduct. I understand this it is a violation of 18 U.S.C. Sec. 1001 to willfully make any falsestatement to EPA. I further understand that if the amended label is not consistent with therequirements of PR Notice 98-10 and CFR 156.46, this product may be in violation of FIFRAand I may be subject to enforcement action and penalties under sections 12 and 14 of FIFRA.

Please note that KRK Consulting LLC is the authorized agent handling all correspondence forPureShield Inc. and therefore all responses should be directed to the contact information on theletterhead above.

Best Regards,

Kevin R. Kutcel,Agent for PureShield Inc.

c c c c « «c c cc c e

c c c c; c t

CO C

3LMCIK:BY TROPHYQUEST

E AMIGROBIOSTATIC AGENT *A Silicone Quaternary Ammonium Salt

Active Ingredient: Octadecylaminodimethyltrihydroxysilyl propyl ammonium chloride 05%Other Ingredients: .". .99.95%TOTALINGREDIENTS:.. ..,::... 100%

KEEP OUT OF REACH OF CHILDREN

CautionEPA Reg. No.87583-3 , EPA EST.

NET CONTENTS: 2,4, 8, 16, 20, 22, or 36 fluid oz.; 1, 5,55, 150, or 300 gal.Lot No. -:7v

FIRST AIDIF IN EYES:

• Hold eye open and rinse slowly and gently with water for 15-20 minutes.• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing.• Call poison control center or doctor for treatment advice.

IF INHALED:• Move person to fresh air.• If person is not breathing, call 911 or an ambulance, and then give artificial

respiration, preferably mouth-to-mouth, if possible.• Call a poison control center or doctor for further treatment advice.

IF ON SKIN:• Take off contaminated clothing.• Rinse skin immediately with plenty of water for 15-20 minutes.• Call a poison control center or doctor for treatment advice.

IF SWALLOWED:• Call a poison control center or doctor immediately for treatment advice• Have person sip a glass of water if able to swallow.• Do not induce vomiting unless told to do so by a poison control center• Do not give anything by mouth to an unconscious person.

•f x r*v»»" ;>•

gsssB?**c c

c c

C I C CL U

CO I.

*A microbiostatic agent is an agent that inhibits the growth of odor causing bacte§ac 'bacteria °which cause staining and discoloration, fungi (mold and mildew), and algae. " c c c t .This product does not protect users or others against food-borne or disease-causing bacteria. c

PRECAUTIONARY STATEMENTSHAZARDS TO HUMANS AND DOMESTIC ANIMALS

Harmful if swallowed, absorbed through the skin, or inhaled. Causes moderate eye irritation.Avoid contact with eyes, skin and clothing. Wear protective eyewear (goggles or face shield)and rubber gloves. Wash thoroughly with soap and water after handling and before eating,drinking, chewing gum, using tobacco or using the toilet.

ENVIRONMENTAL HAZARDS

Commercial and industrial uses: This pesticide js toxic to fish. Do not discharge effluentcontaining this product into lakes, streams, ponds,estuaries, oceans, or other waters unless inaccordance with the requirements of a National Pollutant DischargeElimination System (NPDES) permit and the permitting authority has been notified in writingprior to discharge. Do not discharge effluent containing this product to sewer systems withoutpreviously notifying the local sewage treatment plar&authority. For guidance, contact yourState Water Board or Regional Office of the EPA. T

De-activation may be required during clean up if a spill occurs. De-activation of Black can beachieved by the addition of anionic surfactant (such as soap, suifonates, sulfates) in quantityequivalent to that of Black. •*

Homeowner use: This pesticide is toxic to fish. Do'nbt apply directly to water. Do notcontaminate water by cleaning of equipment or disposal of pesticide.

DIRECTIONS FOR USE

Approved commercial and Industrial Applications

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.Wear protective eyewear (goggles or face shield) and gloves when using this product. Drytreated areas and articles such as clothing before use. Remove children and pets from treated areauntil completely dry.

BLACK can be applied to organic or inorganic substrates by brushing, dipping, padding,soaking, spraying, fogging, or by using foam finishing techniques.

Dry substrates at temperatures from ambient to a maximum of 160° C (320° F) to effect completecondensation of silanol groups and to remove water, solvents and/or traces of methanol from,hydrolysis. Optimum application and drying conditions, such as time and tempe^actuye, should'hidetermined for each application before use. If necessary, reapply BLACK everyl three months <orwhen odor, staining and discoloration due to bacteria, mold stains, and mildew 5t3io?creturru L c L c

C <- C

c. Cc L c. c «. i,

BLACK when used as a concrete additive is added directly concrete preparatioiKUcSS 60 fluid1 ^ounces per cubic feet of concrete. Addition of BLACK reduces deterioration of server- pipes aridmanholes by inhibiting microbiologically induced corrosion.

Approved commercial and industrial applications

The active ingredient in BLACK is effective against odor causing bacteria, bacteria which causestaining and discoloration, fungi (mold and mildew) and algae as a static agent. BLACK can beused as a final bacteriostatic finish on the following items to impart bacteriostatic/fungistatic(mold and mildew) and algaestatic activity.

- Air Filters for furnaces, air-conditioners, air .purification devices, automobiles,recirculating air handling systems.

- Air filters/materials r:-- Aquarium filter material- Bed sheets, blankets, and bedspreads •"* •

Buffer pads (abrasive and polishing)Carpets and draperiesConcrete additive for sewer pipes, manholefeand concrete sewer structures; not to be usedin treatment of storm drains ;:Fiberfill for upholstery, sleeping bags, apparel, where the fiber is cotton, natural down,nylon, polyester, rayon, or wool

- Fiberglass duct boardFire hose fabric .,,/„Humidifier belts "•• I ,Mattress pads and ticking r/Men's underwear and outerwearNon-woven disposable diapersNon-woven polyesterOuterwear apparel (jackets, sweaters, sweatshirts, coats, raincoats, overcoats, jerseys,ponchos)Polyurethane and cellulose foam for household, industrial, and institutional sponges andmops

- Polyurethane and polyethylene foam, when coveredPolyurethane foam for packaging and cushioning in non-food contact applications

- Polyurethane foam used as a growth medium for non-food crops and plantsPre-moistened towelettes and tissue wipes (these do not impart pesticidal properties)Roofing materials — defined as shingles, roofing granules, wood shakes, felt, stone andsynthetic overcoatsSand bags, tents, tarpaulins, wood, sails, and ropesAthletic and casual socksShoe insolesShower curtains ' " ' , ' ' ,Socks comprised of nylon, nylon/orlon, cotton/nylon, linen/Lycra, acryl£c/pol;ypropyleae,nylon, Lycra, wood/silk/nylon/Lycra and wool/acrylic/nylon/Lyrca ' '_ ' , , , , ' . ,Throw rugs ;Toweling made of 100 percent cotton, 100 percent polyester, and blends of'theToilet tank and seat covers ',Umbrellas

Outenvear apparel (jackets, sweaters, sweatshirts, coats, raincoats, overcoats, jerseys,ponchos)Polyurethane and cellulose foam for household, industrial, and institutional sponges andmopsPolyurethane and polyethylene foam, when coveredPolyurethane foam for packaging and cushioning in non-food contact applicationsPolyurethane foam used as a growth medium for non-food crops and plantsPre-moistened towelettes and tissue wipes (these do not impart pesticidal properties)Roofing materials — defined as shingles, roofing granules, wood shakes, felt, stone andsynthetic overcoatsSand bags, tents, tarpaulins, wood, sails, and ropesAthletic and casual socksShoe insolesShower curtainsSocks comprised of nylon, nylon/orlon, cotton/nylon, linen/Lycra, acrylic/polypropylene,nylon, Lycra, wood/silk/nylon/Lycra and wool/acrylic/nylon/LyrcaThrow rugsToweling made of 100 percent cotton, 100 percent polyester, and blends of the two fibersToilet tank and seat coversUmbrellasUpholstery made of acetates, acrylics, cotton, fiberglass, nylon, polyester, polyethylene,polyolefin's, polypropylene, rayon, spandex, vinyl, woolVacuum cleaner bags and filtersVinyl paper-wallpaper for non-food contact surfacesDisposable wiping cloths that can be used for multiple purposes such as dusting orwashing furniture, cars, walls, windows, floors, appliances, dishes, counter tops; thewiping cloths do not impart pesticide propertiesWomen's hosieryWomen's intimate apparel

For Pump Spray Application: Using pump sprayer, spray entire area 4"-6"s from the surfacemaking sure the surface is completely covered. Apply and then let stand until dry or let stand 3minutes and wipe dry with cloth of sponge. If spotting occurs, wipe with moist cloth or sponge.Test for staining and color-fastness of fabrics and carpets by treating and drying a small,concealed area prior to application. BLACK treats approximately 200 square feet per dilutedgallon of water. When treating coarser substrates, more BLACK may be required due toabsorption. A fan may be used to assist in drying carpet.For Commercial Spray Application: For commercial application equipment (i.e. 'carpet/upholstery steamers, rotary jet extraction cleaners, and pressure sprayers) apply and thenlet stand until dry or let stand 3 minutes and wipe dry with cloth or sponge. If spotting occurs,wipe with moist cloth or sponge. Test for staining and color-fastness of fabrics and carpets bytreating and drying a small, concealed area prior to application. BLACK treats approximately-" ;200 square feet per diluted gallon of water. When treating coarser substrates, mor^ B;LACK maybe required due to absorption. Dry carpet areas and surfaces before re-entry and''dry articlea ;,,before use. A fan may be used to assist in drying carpet.

For Dipping/Soaking Application: Use appropriate sized wash basin or tub for dipping/soakingthe item you are treating. Use enough BLACK solution to completely submerge item.Completely submerge item in solution for 3 minutes. Remove item and dry. Test for staining andcolor-fastness of fabrics by treating and drying a small, concealed area prior to application. Donot reuse solution after dipping/soaking.

The substrate can be dried at room temperature or at temperatures to a maximum of 160° C(320°F), for example in a clothes dryer. Remove excess liquid before attempting to dry in aclothes dryer. If necessary, reapply BLACK every three months or when odor, staining anddiscoloration due to bacteria, mold stains, and mildew stains return.

DIRECTIONS FOR USE

For Residential Applications

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.Wear protective eyewear (goggles or face shield) and gloves when using this product. Drytreated areas and articles such as clothing before use. Remove children and pets from treatedarea until completely dry. Clean surfaces prior to application.

Approved Residential Uses

The active ingredient in BLACK is effective against odor-causing bacteria, bacteria whichcause staining and discoloration, fungi (mold and mildew), and algae as a static agent.

Bed sheets,blankets,bedspreads,curtains, draperies(washable only),underwear, socks,intimate apparel,hosiery, throwrugs, toweling,toilet tank covers,shower curtains,shoe insoles,outerwear apparel(jackets, sweaters,sweatshirts, coats,raincoats,overcoats,jerseys, ponchos).

Pestcontrolled



DIP/SOAK: Use appropriate sized washbasin or tub for dipping/soaking the itemyou are treating. Use enough BLACKsolution to completely submerge item.Keep item in solution for 3 minutes.Remove item and wring excess liquidfrom treated item. For larger items (e.g.bedspreads, curtains, draperies), place inwashing machine on spin cycle to aid inthe removal of excess liquid. Test stainingand color-fastness of fabric and carpets bytreating and drying a small concealed area.0

prior to application. Do not reuse solutidnafter dipping/soaking. Dry treated articles \before use. Substrates can be hang-dried

° tecat room temperature or at temperatures to [a maximum of 160°C (320°F); (forexample, in a clothes dryer). If necessary,

1c c

c c

c c c cC C fc

c. c c

c cBLACK can beapplied to fabricsmade of acetates,acrylics, cotton,fiberglass, linen,Lycra, nylon,orlon, polyester,polyethylene,polyolefin,polypropylene,rayon, silk,spandex, vinyl,and wool.

Air filters and airfilter material for:• Furnaces, airconditioners• Air purificationsystems• Automobiles• Recalculatingair handlingsystems• Vacuumcleaner filters• Aquariums

Pestcontrolled


reapply BLACK every three months orwhen odor, staining and discoloration dueto bacteria, mold stains, and mildew stainsreturn.

SPRAY: Clean surface prior toapplication. Using a trigger pump sprayeror pressureisprayer, spray the entiresurface areai4"-6" from the surface,making sure!the surface is completelycovered. Let stand until dry or let stand 3minutes and wipe .dry with cloth orsponge. If spotting occurs, wipe withmoist cloth; or sponge. Test staining andcolor-fastness of fabric by treating anddrying a small concealed area prior toapplication,.ff necessary, reapply BLACKevery three months or when odor, stainingand discoloration due to bacteria, moldstains, and roildew stains return.


SPRAY: When treating filters, removefilter from the unit. Using a trigger pumpsprayer or pressure sprayer, spray theentire surface area 4"-6" from the surface,making sure the surface is completelycovered. Apply and then let stand untildry. If necessary, reapply BLACK everythree months or when odor, staining anddiscoloration due to bacteria, mold stains,mildew stains, and algae stains return.

Roofing materials(such as shingles,roofing granules,wood shakes, felt,stone, syntheticovercoats)

Buffer pads(polishing andabrasive),polyurethane andcellulose forhouseholdsponges andmops, vacuumcleaner bags,umbrellas, casualshoes, athleticshoes

Tubs, glazed tiles,vanity tops,shower curtains,shower stalls(areas), sinks,washable walls,wall paper fornon-food contact,floors, window

Pestcontrolled


Pestcontrolled


Pestcontrolled



SPRAY: Make sure the roof is cleanprior to application. Using a pressuresprayer, spray the entire surface area 6"-12" from the surface, making sure thesurface is completely covered. Afterapplying BLACK, let stand until dry.BLACK treats approximately 200 squarefeet of roofing per gallon (50 square feetper quart). If necessary, reapply BLACKevery three-months or when odor, stainingand discoloration due to bacteria, moldstains, mildew stains, and algae stainsreturn. "X


SPRAY: Clean surface prior toapplication. Using a trigger pump sprayeror pressure sprayer, spray the entiresurface area 4"-6" from the surface,making sure the surface is completelycovered. Let stand until dry or let stand 3minutes and wipe dry with cloth orsponge. If spotting occurs, wipe withmoist cloth or sponge. If necessary,reapply BLACK every three months orwhen odor, staining and discoloration dueto bacteria, mold stains, and mildew stainsreturn.


SPRAY: Using a trigger pump sprayer,spray the entire surface area 4"-6" fromc c

the surface, making sure the surface is ' Scompletely covered. Let stand until dry orc Jlet stand 3 minutes and wipe dry with ' |cloth or sponge. If spotting occurs, wipecc

with moist cloth or sponge. If necessary,reapply BLACK every three months orwhen odor, staining and discoloration due

c c c ce «

t cc

c ct

sills, cabinets,garbage cans,appliances,refrigerators(exterior),fiberglass,Formica, glazedtiles, glazedporcelain,synthetic marble,plastic, vinyl

to bacteria, mold stains, and mildew stainsreturn.

Imparts microbiostatic properties.Use on carpet and upholstery to inhibit odor causing bacteria, bacteria which cause staining anddiscoloration, and fungi (mold and mildew). "iUnscented. "1Use on carpet and upholstery to inhibit the growth of odor causing bacteria.Use on carpet and upholstery to inhibit the growth of bacteria which cause staining anddiscoloration.Use on carpet and upholstery to inhibit the growth of fungi (mold and mildew).Use on carpet and upholstery to inhibit the growth of pdor,causing bacteria, bacteria which causestaining and discoloration, and fungi (mold and mildew).Provides an invisible microbiostatic coating to inhibit the growth of odor causing bacteria.Provides an invisible microbiostatic coating to inhibit the growth of bacteria which causestaining and discoloration.Provides an invisible microbiostatic coating to inhibit the growth of fungi (mold and mildew).Provides an invisible microbiostatic coating to inhibit the growth of algae.Provides an invisible microbiostatic coating to inhibit the growth of odor causing bacteria,bacteria which cause staining and discoloration, fungi (mold and mildew), and algae.Prevents deterioration caused by bacteria and fungi (mold and mildew).Inhibits deterioration caused by bacteria.Resists development of microbial odors.Resists development of stains and discoloration due to bacteria.Resists development of stains due to fungi (mold and mildew).Resists stains due to algae.Resists development of microbial odors, stains and discoloration due to bacteria, fungi (mold andmildew), and algae.Provides/creates an invisible barrier to inhibit the growth of odor causing bacteria. c c c * «

c c c t e f *Provides/creates an invisible barrier to inhibit the growth of bacteria which cause s;ta|ning and6

discoloration. c e < , f tt C < C C S CtlK.1

Provides/creates an invisible barrier to inhibit the growth of fungi (mold and mildjsw). c

Provides/creates an invisible barrier to inhibit the growth of algae. c « c « t '^" *Provides/creates an invisible barrier to inhibit the growth of odor causing bacteria!; bacteria cwhich cause staining and discoloration, fungi (mold and mildew), and algae. c °c £ ° ^ c (. c c cInhibits the growth of odor causing bacteria between cleanings.

r

Inhibits the growth of bacteria which cause staining and discoloration between cleanings.Inhibits the growth of fungi (mold and mildew) between cleanings.Inhibits the growth of algae between cleanings.Inhibits the growth of odor causing bacteria which cause staining and discoloration, fungi (moldand mildew), and algae between cleanings.Mold, mildew, odor protector and inhibitor.BLACK is an antimicrobial agent effective against odor causing bacteria.BLACK is an antimicrobial agent effective against bacteria which cause staining anddiscoloration.BLACK is an antimicrobial agent effective against fungi (mold and mildew).BLACK is an antimicrobial agent effective against algae.BLACK, an antimicrobial agent, controls the source of odors on surfaces in the home, in thebathroom, in the kitchen.Bacteriostatic, fungistatic (mold and mildew), algaestatic.BLACK, and antimicrobial agent, inhibits smelly ddors caused by mold and mildew that cangrow in even the cleanest of homes. " :

BLACK, an antimicrobial agent, inhibits the growth pf odor causing bacteria.Effective on hard non-porous washable bathroom and kitchen surfaces and fixtures around thehome.Effective on modern hard non-porous washable surfaces made of fiberglass, glazed porcelain,Formica, stainless steel, synthetic marble.

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage and disposal.

Pesticide Storage: Store in original, tightly closed containers below 30°C (86°F) and above 0°C(32°F) in a secure area inaccessible to children and away from food or feed.

Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site orat an approved waste disposal facility. [For homeowner use the statement will read: "PesticideDisposal: Wastes resulting from the use of this product may be disposed of on site."]

Non-Residential Use Container Disposal for containers larger than 5 gallons: Non-refillablecontainer. Do not refill or reuse this container. Triple rinse (or equivalent) promptly afteremptying. Then offer for recycling if available or puncture and dispose of in a sanitary landfill,or by incineration.[For residential use statement will read: "Container Disposal for containers 5 gallons or'less:^Securely wrap original container in several layers of newspaper and discard inctrasfit'] c

(, C C C C C

FOR MORE INFORMATION CONCERNING THIS PRODUCT, PLEASE CONSULT THF •-MATERIAL SAFETY DATA SHEET (MSDS). THE MSDS CAN BE OBTAINED BY '""„ 'WRITING INTERNATIONAL DISTRIBUTION ALLIANCE AT 1445 JUPlTEfTPARK c c t c t

DRIVE, SUITE 11, JUPITER, FL 33458. 'L"""""

IMPORTANT: WARRANTY AND DISCLAIMER INFORMATIONInternational Distribution Alliance warrants that the product conforms to its chemical descriptionand is reasonably fit for the purposes stated in this bulletin when in accordance with directionsunder normal conditions of use; but this warranty of fitness for a particular purpose does notextend to the use of this product contrary to bulletin instructions, or under abnormal conditions,or under conditions not reasonably foreseeable to the seller, and buyer assumes the risk of anysuch use. INTERNATIONAL DISTRIBUTION ALLIANCE DA SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSED OR IMPLIED WARRANTY, INCLUDING THEWARRANTY OF MERCHANTABILITY.

ccc cc c

e c c c c c c ic c cc c c c

c ca c t C C C c C C C C C

I C ^C I

C 1. ^ C C CC (. C.

c c c c c c c c

c cC »', C C L C

us epa, pesticide product label, bio-protect am …...2011/08/04 · c krk consulting llc 5807...

Documents