u.s. department of labor mine safety and health...
TRANSCRIPT
U.S. Department of Labor Mine Safety and Health Administration
PO Box 25367
Denver, Colorado 80225
ROCKY MOUNTAIN DISTRICT
METAL AND NONMETAL MINE SAFETY AND HEALTH
September 19, 2013
Mr. Paul Te Prieto
Arnold Machinery Co.
2975 West 2100 South
Salt Lake City, UT 84119
Dear Mr. Te Prieto:
Re: Part 48 B Training Plan
Contractor ID FN4
The training plan that you recently submitted per the
requirements of 30 CFR Part 48, Subpart B (Surface) has
been reviewed and approved as of the date stamped on the
enclosed copy.
Any future changes or revisions to your approved training
plan must be submitted to and approved by the District
manager.
If you have any questions, please contact the Educational
Field Services office at (303)231-5434.
Sincerely,
District Manager
Enclosure
cc: EFS
Optional Training Plan Format - General Information
Part 48 Training Program
Optional Training Plan Format Independent Contractors
Metal/Nonmetal Surface Mines 9/19/2013 3:07:32 PM
General Information
1. Company and mine names
Page 1 of 1
MSHA ID#:
Company Name:
Address:
Mine Name:
FN4
Arnold Machinery Company
2975 West 2100 Salt Lake City, UT 84119
N/A
2. Person responsible for health and safety training at the mine
Name:
Position/Title:
Phone Number:
E-Mail:
Dan Bletzacker
Director: Environmental Health & Safety
(801) 972-4000
3. MSHA approved instructors and courses each is qualified to teach
Name(s)
Dan Bletzacker
MIIN
M61608253
Course Code(s)
IS
4. Location(s) where training will be given
New Miner:
Experienced Miner:
Task Training:
Annual Refresher Training:
Hazard Training:
mine site/offsite
mine site/offsite
mine site/offsite
mine site/offsite
mine site/offsite
5. Number of miners and trainees
Approximate number of miners employed:
Maximum number of trainees per training session:
50
50
APPROVED
SEP 1 9 2013
USDOL MSHA-MNM ROCKY MTN DIST. MGR
http://www.dol.gov/elaws/msha/training/report.asp?program=ge&mine_id=FN4&mine_type=MS&user_t... 9/19/2013
New Miner Training Program
Part 48 Training Program Optional Training Plan Format
Independent Contractors Metal/Nonmetal Surface Mines
ID#FN4 7/31/2013 11:26:53 PM
Page 1 of 2
New Miner Training Program
Each new miner will. receive no less than 24 hours of training as prescribed in this section.
New Miner Training Request
Request that part of training be given after work assignment? No
Subjects
Section 48.25
1. Statutory rights of miners and their representatives under the Act; authority and responsibility of supervisors (§ 48.25(b)
(1))
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, computer, discussion, lecture
1977 Mine Act, applicable regulations, company, company rules, MSHA
oral feedback, written feedback
2. Self-rescue and respiratory devices rs 48.25(b)(2))
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture
applicable regulations, company, MSHA, training devices, vendor/manufacturer fit
test, observation, oral feedback, written feedback
3. Transportation controls and communication systerns g 48.25(b)(3))
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture
applicable regulations, company, mine communication systems, MSHA, vendor/manufacturer,
warning signals/directional signs
observation, oral feedback, written feedback
4. Introduction to work envlronrnent g 48.25(b)(4))
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture, site tour
applicable regulations, company, MSHA, vendor/manufacturer
observation, oral feedback, written feedback
file :///C:/Users/schroeder. william/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/C... 8/28/2013
u U
New Miner Training Program
5. Escape and emergency evacuation plans; fire warning and firefighting(§ 48.25(b)(5)1
Page 2 of 2
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture, site tour
applicable regulations, company, escape and emergency evacuation plans, fire warning signals
and firefighting procedures, mine escape system, MSHA, vendor/manufacturer
observation, oral feedback, written feedback
6. Ground control; working in areas of highwalls, water hazards, pits and spoil banks; illumination and night work (§ 48.25
(b)(6)1
Teaching Methods:
Course Materials:
Evaluation Methods:
7. Health [§ 48.25(b)(7)J
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture, site tour
applicable regulations, company high wall and ground control plans, MSHA
oral feedback, written feedback audio/video, demonstration, discussion, lecture
1977 Mine Act, applicable regulations, company, dosimeters, dust control plan, health control
plans, MSDS, MSHA, protective equipment, warning labels
oral feedback, written feedback
8. Hazard recognition [§ 48.25(b)(B)J
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture
applicable regulations, company, MSHA, vendor/manufacturer
oral feedback, written feedback
9. Electrical hazards [§ 48.25(b)(9)1
Teaching Methods:
Course Materials:
Evaluation Methods:
10. First aid [§ 48.25(b)(1D)J
Teaching Methods:
Course Materials:
Evaluation Methods:
11. Explosives (§ 8.25(b)(11)J
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture
applicable regulations, company, lockout devices, MSHA, vendor/manufacturer oral
feedback, written feedback
audio/video, demonstration, discussion, lecture, CPR/AED
applicable regulations, company, first aid supplies, MSHA, vendor/manufacturer
observation, oral feedback, written feedback
audio/video, discussion, lecture
applicable regulations, company, MSHA, vendor/manufacturer oral
feedback, written feedback
12. Health and safety aspects of the tasks to which the new miner will be assigned [§ 48.25(b} (12) J
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture, site tour
applicable regulations, company, Wacom Program, MSDS, MSHA, protective equipment, safe work procedures, vendor/manufacturer ( ffe F ,� · , -:..\� t: ,- � observation, oral feedback, written feedback { �,u'::!J , J 1� [L,
1.. I, ._i
file :///C :/U sers/schroeder. william/AppData/Local/Microsoft/Windows/Temporary%20Internet%20 F iles/C... 8/28/2013
Experienced Miner Training Program
Part 48 Training Program
Page 1 of 2
Optional Training Plan Format Independent Contractors
Metal/Nonmetal Surface Mines ID#FN4
7/31/2013 11:26:54 PM
Experienced Miner Training Program Section 48.26
Each experienced miner will receive the training prescribed in this section before beginning work duties. When an experienced miner
returns to mining after an absence of 5 years or more, the miner will receive at least 8 hours of training.
Subjects
1. Introduction to work environment js 48.26(b)(1)1
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture, site tour
applicable regulations, company, mine equipment, MSHA, vendor/manufacturer
observation, oral feedback, written feedback
2. Mandatory health and safety standards js 48.26(b)(2)]
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture
applicable regulations, company mine act,, MSHA, vendor/manufacturer oral
feedback, written feedback
3. Authority and responsibility of supervisors and miners' representatives [§ 48.26(b)(3)]
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture
applicable regulations, company organization chart, company reporting procedures for hazards,
mine act, MSHA
oral feedback, written feedback
4. Transportation controls and communication systems [§ 48.26(b)(4)1
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture
applicable regulations, company, mine communication systems, MSHA, vendor/manufacturer,
warning signals/directional signs
observation, oral feedback, written feedback
5. Escape and emergency evacuation plans; fire warning and firefighting [§ 48.26(b)(5)]
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture
applicable regulations, company, escape and emergency evacuation plans, fire warning signals
and firefighting procedures, mine escape system, MSHA, vendor/manufacturer
observation, oral feedback, written feedback
file:///C:/Users/schroeder. william/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/C... 8/28/2013
L I
J
Experienced Miner Training Program Page 2 of 2
6. Ground control; working in areas of high walls, water hazards, pits and spoil banks; illumination and night work [§ 48.26
(b)(6)]
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture, site tour
applicable regulations, c company, high wall and ground control plans, MSHA
oral feedback, written feedback
7. Hazard recognition (§ 48.26(b)(7)]
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture, site tour
applicable regulations, blasting procedures, company, MSHA, vendor/manufacturer
oral feedback, written feedback
8. Prevention of accidents js 48.26(b)(8)J
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture
accident reports, applicable regulations, company, MSHA, vendor/manufacturer, oral
feedback, written feedback
9. Emergency medical procedures g 48.26(b)(9)]
Teaching Methods:
Course Materials:
Evaluation Methods:
10. Health [§ 48.26(b)(1 on Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, llecture
applicable regulations, company, emergency medical arrangements, MSHA, vendor/manufacturer
observation, oral feedback, written feedback audio/video, demonstration, discussion, lecture
1977 Mine Act, applicable regulations, company, dosimeters, dust control plan, health control
plans, MSDS, MSHA, protective equipment, warning labels
observation, oral feedback, written feedback
11. Health and safety aspects of the tasks to which the experienced miner is assigned [§ 48.26(b)(11)J
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, demonstration, discussion, lecture, site tour
applicable regulations, company, HazCom Program, MSDS, MSHA, protective equipment, safe
work procedures, vendor/manufacturer
observation, oral feedback, written feedback
,I
j I
'--"'' I �I�
�
file :///C:/U sers/schroeder. william/AppData/Local/Microsoft/Windows/Temporary%20Intemet%20Files/C... 8/28/2013
Task Training Pro gram
Task Training Program
Part 48 Training Program Optional Training Plan Format
Independent Contractors
Metal/Nonmetal Surface Mines
ID#FN4
7/31/2013 11:26:56 PM
Page 1 of 2
Section 48.27
All training and supervised practice and operation required by this section will be given by a qualified trainer, or a supervisor
experienced in the assigned tasks, or other person experienced in the assigned task.
Section 48.27(a) Miners
These miners will not be allowed to perform new tasks without direction and immediate supervision until they have demonstrated
safe work procedures to the operator or the operator's agent.
List of Task Assignments
Mobile Equipment Operators, Drilling, Haulage, Ground Control, and Blasting Operations
Tasks/Jobs/Occupations:
Subjects
Forklift operator
These miners will be trained as specified below before performing the new task:
1. Health and safety aspects and safe operating procedures for work tasks, equipment or machinery is 48.27(a)(1)J
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture
company, HazCom Program, JSAs, MSHA, operating manuals, protective equipment
observation, oral feedback, written feedback
2. Supervised practice during nonproduction or supervised operation during production js 48.27(a)(2)(i) or 48.27(a)(2)(ii)J
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture, supervised practice or operation
company, JSAs, MSHA
observation, oral feedback, written feedback (, r
\ '=u u
3. New or modified machines and equipment 48.27(a)(3)J
file :///C:/U sers/schroeder. william/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/C... 8/28/2013
3
Task Training Program
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture
company, JSAs, MSHA, operating manuals
observation, oral feedback, written feedback
Page 2 of2
Section 48.27(c) Miners
Miners assigned a new task not covered in Section 48.27(a) will be instructed in the safety and health aspects and safe work
procedures of the task, prior to performing such task.
List of Task Assignments
Other Miners
Tasks/Jobs/Occupations:
Subjects
I inspector/presh ifter
These miners will be trained as specified below before performing the new task:
1. Safety and health aspects and safe work procedures of the task rs 4B.27(c)J
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture
company, HazCom Program, JSAs, MSDS, MSHA, operating manuals, protective equipment
observation, oral feedback, written feedback
, r: I , I
• i I , 'L'-. '....
file://IC :/U sers/schroeder. william/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/C... 8/28/2013
--
Annual Refresher Training Program
Part 48 Training Program
Page 1 of 3
Optional Training Plan Format Independent Contractors
Metal/Nonmetal Surface Mines
ID#FN4
9/19/2013 3:08:35 PM
Annual Refresher Training Program Section 48.28
Each miner will receive a minimum of 8 hours of annual refresher training. However, the time spent for each course may vary to
meet specific needs, such as changes in mining conditions, accident history or other safety and health problems.
-- --- ---------- --- ------------
Predicted time of each session of refresher training is October, As needed.
Predicted length of each session of refresher training is One 8-hour session.
Subjects
---------- --- ----------- ---------
1. Mandatory health and safety standards rs 48.28(b)(1)]
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
From 0:10 to 2:00 [hrs/:mins]
audio/video, demonstration, discussion, lecture
applicable regulations, company, MSHA, vendor/manufacturer
oral feedback, written feedback
2. Transportation controls and communication systems rs 48.28(b)(2)]
-------------------------------- -- --
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
From 0:10 to 2:00 [hrs/: mins]
audio/video, demonstration, discussion, lecture
applicable regulations, company, mine communication systems, MSHA, vendor/manufacturer,
warning signals/directional signs
observation, oral feedback, written feedback
3. Escape and emergency evacuation plans; fire warning and firefighting [§ 48.28(b)(3)J
-----------------------
Approximate Time:
Teaching Methods:
From 0:10 to 2:00 [hrs/mins]
audio/video, discussion, lecture, site tour
I t-
Course Materials:
Evaluation Methods:
applicable regulations, company, escape and emergency evacuation plans, fire warning signals
and firefighting procedures, mine escape system, MSHA vendor/manufacturer
observation, oral feedback, written feedback
4. Ground control; working in areas of high walls, water hazards, pits and spoil banks; illumination and night work [§ 48.28
(b)(4)]
http://www.dol.gov/elaws/msha/training/rep01t.asp?program=ar&mine_id=FN4&mine_type=MS&user_t... 9/19/2013
Annual Refresher Training Program Page 2 of 3
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
From 0:10 to 2:00 [hrs/mins]
audio/video, discussion, lecture, site tour
applicable regulations, company, high wall and ground control plans, MSHA
oral feedback, written feedback
5. First aid [§ 4B.2B(b)(5)J
- - - -- -- ----------
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
From 0:10 to 2:00 [hrs/:mins]
audio/video, demonstration, discussion, lecture, CPR/AED
applicable regulations, company, first aid supplies, MSHA, vendor/manufacturer
observation, oral feedback, written feedback
6. Electrical hazards js 48.2B(b)(6)J
Approximate Time:
From 0:10 to 2:00 (hrs/mins]
------
Teaching Methods:
Course Materials:
Evaluation Methods:
audio/video, discussion, lecture
applicable regulations, company lockout devices, MSHA, vendor/manufacturer
oral feedback, written feedback
7. Prevention of accidents js 4B.2B(b)(7)J
--------- -- ----------- -
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
From 0:10 to 2:00 [hrs/mins]
audio/video, discussion, lecture
accident reports, applicable regulations, company, MSHA, vendor/manufacturer
oral feedback, written feedback
8. Health [§ 4B.2B(b)(B)]
--- ---------------------- -- - ---------------
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
From 0: 10 to 2:00 [hrs/mins]
audio/video, demonstration, discussion, lecture
1977 Mine Act, applicable regulations, company, dosimeters, dust control plan, health control
plans, MSDS, MSHA, protective equipment, warning labels
oral feedback, written feedback
9. Explosives [§ 4B.2B(b)(9)J
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
- --- ------ --- --- ---- -- ----
From 0:1 Oto 2:00 [hrs/mins]
audio/video, discussion, lecture
applicable regulations, company, MSHA, vendor/manufacturer
oral feedback, written feedback
10. Self-rescue and respiratory devices js 4B.2B(b)(10)J------ ----
Approximate Time:
Teaching Methods:
Course Materials:
Evaluation Methods:
---------
From 0:10 to 2:00 [hrs/mins]
audio/video, demonstration, discussion, lecture
applicable regulations, company, MSHA, training devices, vendor/manufacturer
fit test, observation, oral feedback, written feedback
Total Minimum and Maximum Time
Total Minimum: 1 :40 [hrs/mins]
http://www.dol.gov/elaws/msha/training/repo
rt.asp?program=ar&mine_id=FN4&mine_ty
pe=MS&user_t... 9/19/2013
Annual Refresher Training Program
Total Maximum: 20:00 [hrs/mins]
Page 3 of 3
http://www.dol.gov/elaws/msha/training/report.asp?program=ar&mine_id=FN4&mine_type=MS&user_t... 9/19/2013
8/16/13 Task Trainlng Program
Part 48 Training Program
Optional Training Plan Format Independent Contractors
Coal Surface Mines ID#
FN4 7/31/2013 6:46:41 PM
Task Training Program Section 48.27
All training and supervised practice and operation required by this section will be given by a qualified trainer, or a
supervisor experienced in the assigned tasks, or other person experienced in the assigned task.
Section 48.27(a) Miners
These miners will not be allowed to perform new tasks without direction and immediate supervision until they have
demonstrated safe work procedures to the operator or the operator's agent.
List of Task Assignments
Mobile Equipment Operators, Drilling, Haulage, Ground Control, and Blasting Operations
Tasks/Jobs/Occupations: Forklift operator
Subjects
These miners will be trained as specified below before performing the new task:
1. Health and safety aspects and safe operating procedures for work tasks, equipment or machinery [§ 48.27(a)(1 )]
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture
company, HazCom Program, JSAs, MSDS, MSHA, operating manuals, protective
equipment
observation, oral feedback, written feedback--------·--- --- ------------------
2. Supervised practice during nonproduction or supervised operation during production[§ 48.27(a)(2)(i) or
48.27( a)(2)(ii)]
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture, supervised practice or operation
company, JSAs, MSHA, operating manuals
observation, oral feedback, written feedback1")
8/16/13 TaskTrainlng Program
3. New or modified machines and equipment [§ 48.27(a)(3)]
·---·------·---·-- ------------------------------·-- ----·--·--· ----------------· - --------·-------·-···------
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture, company
JSAs, MSHA, operating manuals
observation, oral feedback, written feedback
Section 48.27{c) Miners
Miners assigned a new task not covered in Section 48.27(a) will be instructed in the safety and health aspects and
safe work procedures of the task, prior to performing such task.
List of Task Assignments
----�-�-- "..,--·--------------------,-----�---- ------------- ----------·- --- ------�--------·-·�"··· ····----·-·
Other Miners
Tasks/Jobs/Occupations:
Subjects
lnspector/preshifter
These miners will be trained as specified below before performing the new task:
1. Safety and health aspects and safe work procedures of the task [§ 48.27(c)J
Teaching Methods:
Course Materials:
Evaluation Methods:
demonstration, discussion, lecture
company, HazCom Program, JSAs, MSDS, MSHA, operating manuals, protective
equipment
observation, oral feedback, written feedback
fil,...,ll/r,,111 ............. ,.......... :,... ..... tt» ......... 11'"""'"' ......... Aft.lr'\DV/I\ACU/\ 11\ICAll!.ACUA TDl\lf\llf\10- DI 1\1\1 /\1\ln DAI II C' 11\ITDI 1/"'Tno In I\II IPi.AOCD/I IDnATCn TD/\lt\Jlf\lr::! DJ /\1\Jrr,..� ')/")