upvc wall panal
TRANSCRIPT
-
8/4/2019 Upvc Wall Panal
1/13
Animal Biosafety Level 3 Checklist
The following items fall under the category of secondary barriers pertaining to the laboratory facility
design.
Item
Issue
Y/N
Comment
1
Signage: biohazard sign, agents used, name, and
telephone number.
2
Lab separated from building traffic.
3
Self-closing and self-locking door at entry.
4
Movement of supplies or wastes can be through aseparate double-door access or autoclave.
5
Double-door entry (inward opening) into the animal
room that includes a change room and shower(s).
6
A hands-free or automatically operated hand wash-ing sink is provided in each animal room near the
exit door.
-
8/4/2019 Upvc Wall Panal
2/13
7
Internal building services such as light fixtures, duct-
work, and piping are arranged to minimize horizon-
tal surfaces.
8
Interior of surfaces of walls, floors, and ceilings
where BSL-3 agents are handled are constructed for
easy cleaning and decontamination.Walls, ceilings,
and floors should be smooth, impermeable to liquidsand resistant to chemicals. Seams, if present should
be sealed.
9
Windows are not recommended. Any windows mustbe resistant to breakage and must be sealed.
10
Ventilation should be provided in accordance with
criteria from the Guide for the Care and Use of
Laboratory Animals.
11
A ducted ventilation system is provided to create
directional airflow from clean areas toward contami-nated areas.
12
Exhaust air is not re-circulated to any other area of
the building.
13
-
8/4/2019 Upvc Wall Panal
3/13
The outside exhaust must be dispersed away from
occupied areas and air intakes or must be HEPA-fil-
tered.
14Lab personnel must verify direction of airflow. Providevisual monitoring device at animal room entry.
15
Consideration should be given to installing an HVAC
control system to prevent sustained positive pressur-ization of the animal spaces.
16
Audible alarms to notify personnel of HVAC system
failure.
17
Biological safety cabinets, when connected to the
exhaust system must be done in a manner that avoids
interference with the air balance of the cabinets orbuilding exhaust system.
18
Biological safety cabinets are located away from
doors, room supply louvers, and from heavily-traveled
areas.
19
Vacuum lines are to be protected with disinfectant
traps and HEPA filters.
-
8/4/2019 Upvc Wall Panal
4/13
20
Eyewash station available inside the laboratory?
21
Illumination adequate for all activities?
22
A method for decontaminating all laboratory wastesis available in the facility.
-
8/4/2019 Upvc Wall Panal
5/13
http://www.nicomac.com/contact.html
Cleanroom Partition Walls
Nicomac pharmaceutical cleanroomwalls are a composite construction of two skins of high pressure plastic laminate over an aluminum
framework with a sealed and insulated interior. Standard modular clean room panel dimensions are1250 mm (4') wide with an overall length ranging from 3 to 4,2 mt (10 to 14). Standard panels havean overall thickness of 45 mm (1 3/4"). The assembly is self-supporting. Additional wall heights can be
achieved by using a stacking technique. The self-supporting, insulated walls are assembled with an
interior aluminum framework. The panel seams are sealed by silicone with a perfectly flush finishing.
(UPVC welded seams are also available). Insulation materials are sandwiched between the two skinlayers and sealed from the exterior by the aluminum framework. There is a selection list of materials
for insulation and wall skins according different needs in cleanroom construction. The Nicomac unique
standard wall skin is an anti-scratch high-pressure laminate (impregnated with a special phenolic resinto be fire resistant). The high-pressure laminate can be easily milled to allow flush mounting of all
covings and accessories and guarantees compliance with cGMP rules for room cleaning. The wall
system is flexible thus allowing easy cleanroom installation and accepts changes to design in the fieldand can be reconfigured for use in other locations.Upvc coated and metal powder coated metal panels
are also available.
http://www.nicomac.com/clean_room_partition_upvc.htmlhttp://www.nicomac.com/clean_room_partition_upvc.htmlhttp://www.nicomac.com/clean_room_partition_upvc.htmlhttp://www.nicomac.com/clean_room_partition_upvc.htmlhttp://www.nicomac.com/clean_room_partition_upvc.htmlhttp://www.nicomac.com/clean_room_partition_upvc.htmlhttp://www.nicomac.com/clean_room_partition_upvc.html -
8/4/2019 Upvc Wall Panal
6/13
With Nicomac wall system you can achieve:
CGMP certified cleanroom design
Full compatibility with chemicals used for cleaning and sanitizing
Installed in all major pharmaceutical companies
Easy clean room installation
State-of-the-art cleanroom technology Flush surfaces everywhere!
Antiscratch materials
Easy to modify during wall installation
Wall system suitable for ISO 5 (Class 100) to ISO 8 (Class 100,000) cleanrooms
Cleanroom Doors
-
8/4/2019 Upvc Wall Panal
7/13
Nicomac cleanroom doors can be configured assingle/double swing-out or as horizontal sliding either manual, automatic or semiautomatic. Nicomac
Pharmaceutical door panels are assembled with the same panels of the wall system. Swing out doors
are designed to fit flush with both sides of the wall panel system and are supplied in several
dimensions. The internal framework is constructed of welded extruded aluminum profiles. Theexternal frames are manufactured with rounded anodized or epoxy coated aluminum profiles with air
tight dual gaskets. All fasteners for the hinges and latches can be recessed into the door frame.
Standard hinges allow doors to swing 180 degrees from full open to full closed position.
Nicomac pharmaceutical clean room doors are available also with interfacing profile for a flush and
easy installation on existing walls.
Fully flush surfaces with wall system
A large variety of swing out pharmaceutical doors
Manual, semiautomatic and fully automatic sliding doors
Door hardware by world market leading manufacturers
Custom dimensions available
PLC controlled interlocking system for GMP compliance.
Heavy-duty structure for high durability
Full compatibility with chemicals used for cleaning and sanitizing
-
8/4/2019 Upvc Wall Panal
8/13
Clean Room Ceilings Walk On & Standard
Suspended False Ceilings
Nicomac T grid type
Our unique T-grid walks on clean room suspended ceilings consist of a load-bearing structure made of
aluminum suitable to support ceiling panels, lights and filter units. The T-grid is supported by threadedtension bars with adjustable turnbuckles that are fastened to the overhead support at 4 intervals. There
is a selection of two standard panel sizes: 2' x 2' (605 x 605 mm) or 2' x 4' (605 x 1210 mm).
Tiles for our clean room ceilings can be designed to be flush to the grid. Depending on the type of tile
used the entire ceiling system can be certified as walk on (single load of 160 Kg (352 Lb) in a square
meter of false ceiling and situated in the most unfavorable static position).
Our pharmaceutical T grid false ceilings can be used when ceiling maintenance is provided for the
room and walk on ceilings are not necessary. Dedicated less expensive pharmaceutical grade tiles areused in this case.
(Click image to enlarge) (Click image to enlarge) (Click image to enlarge) (Click image to enlarge)
Advantages of Nicomac unique walk on T grid system
T grid system requires not cut outs for filters and light fixtures
Flexibility while positioning filters and light fixtures
Flush to the grid walk on system!1250 mm x 3000 mm (4' x 10') false ceiling
This is a hermetic false suspended ceiling. Flexible and easy to assemble, it can be installed before orafter wall location. This kind of false ceiling is made by means of polystyrene or polyurethane panels
sandwiched between two layers of aluminum plates. Both sides are pre-painted with epoxy powder
coating. All sides are closed by aluminum frame. The result is a perfectly smooth and coplanar surfacethat is very easy to clean. The bearing aluminum profile is housed by clicking-in between panels.
There is a threaded tension bar, with an adjustment ring, to be fastened to the existing ceiling.
-
8/4/2019 Upvc Wall Panal
9/13
Filter, light and other filter accessories can be accessed from the top of the clean room ceiling. Holes
for filters, light and utilities are prepared at our site with HI tech Numeric Control Pantograph.
Cleanroom Windows
All window units for the Nicomacmodular cleanroom system are double glazed, and fit flush with both surfaces of the wall panel system
(45mm). Each unit is constructed of two panels of 3+3 mm double layered and laminated safety glass.
Each panel includes a layer of PVB (polyvinyl butyral) film laminated between two layers of glass. The
two panels sit within a structured framework, and air fills the space between the two panels.
The window system is especially designed for the cleaning needs of the pharmaceutical cleanroom. It iscompletely silicone sealed, and includes a micro-perforation profile with an integral silica gel moisture
absorption system, designed to eliminate fogging. Rounded corners add to the strength of the
cleanroom window unit and enhance their appearance.
Tempered glass (6mm) in place of the laminated glass is available upon request.
Nicomac windows can be installed in existing clean rooms.
Fully flush to the wall
Unique rounded corners available
Double glass and safety film
Full glass panels available
-
8/4/2019 Upvc Wall Panal
10/13
Bioasset Technologies Private Limited, Maharastra
Contact Person : Mrs. Manjiri Ashtekar(Director)
Designation: Director
Address : 213, Shree Siddhi Manora, Agashi Road, Virar (W)
Thane, Maharashtra - 401 303 (India) Tel. : +91-250-3058380 / 32987345
E-mail :[email protected]
mailto:[email protected]?subject=Enquiry%20from%20Maharashtra%20Industries%20Directory.mailto:[email protected]?subject=Enquiry%20from%20Maharashtra%20Industries%20Directory.mailto:[email protected]?subject=Enquiry%20from%20Maharashtra%20Industries%20Directory. -
8/4/2019 Upvc Wall Panal
11/13
Contact
Address:Corporate Headquarters
Dyna House
98/A5, Hadapsar Industrial
Estate,Behind Kirloskar Pneumatic,
Pune - 411 013. INDIA.
Phn : +91 - 20 - 26872772 / 26873705 / 26811288 /
26814076Fax : +91 - 020- 26877955
Product Help and SupportProduct support options and contact information.
Mr. Ramesh Yemul, Director - Research & Projects
Mobile: +91 9822192665
Sales and Marketing
Get more information about purchasing Dyna Filter products. [email protected]
Corporate Information
Corporate contact information and communication.
Clean Room Contains
Partition wall Panels
1. Plane panels
2. view panel3. Inbuilt Riser Panel
Ceiling Panels
Clean Room Doors
Coving
Risers
Hepa filter housing
Hepa filters Clean Room Equipment
1A) Partition Wall Panels-(plane)
MOC -1. P.C.G.I. ( Pre Coated Galvanize Iron)
2. Aluminum
3. Stainless Steel (304)
Construction- Factory Fabricated Double Skin Sandwich panels.
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected] -
8/4/2019 Upvc Wall Panal
12/13
Insulation - Polyurethane Insulation
Density - 40 kg/ m3
Installation - Male Female attachment.
Size -
1. 1200x2400 , 1200x3000 , 1200x4000 mm
2. Or 1200x size required by customer up to 4 mt.
1B) Partition Wall Panels-(Inbuilt Riser)
Moc, Construction, Insulation , Installation & Size ( Same as 1A)
Inbuilt Riser Duct ( 400x 80, 600x80) MOC of duct - G.I. 14 Swg.
M.S. Powder coated Grill.
1C) Partition Wall Panels-(View Window)
Moc, Construction, Insulation , Installation & Size ( Same as 1A)
View window of size 900 (w) x 900(H) MM Toughen Glass
Silica Gel for create vacuum between two glass.
2) Ceiling Panel - Moc, Construction, Insulation , Installation & Size ( Same as 1A)
MS Suspension rod with accessories for ceiling panels.
Cut outs for Hepa , Tube light & Return ( if required)
3) Clean Room Doors-
Moc, Construction, Insulation ( Same as 1A)
With Accessories1. Door closer ( Dorma Make)
2. Ball bearing Hinges 5
3. Door seal4. Door Handle ( 10)
5. Tower Bolt ( for Double Door)
6. Door Frame
7. View Window ( 700 x 500mm)8. Gasket
9. Door Lock
Types of Door
1. Single Door
2. Double Door
SIZES-1. 750 x 2100(h) mm
2. 900 x 2100 (h) mm
3. 1000 x 2100(h)mm4. 1200x 2100 (h) mm
5. 1500x 2100 (h) mm
4) Coving- : Aluminum / PVC Extruded covings .
5) Grills -: M.S. Powder coated
Physical Properties
-
8/4/2019 Upvc Wall Panal
13/13
Sheer strength - 2.0 kg/ cm2
Bending strength - 2.0~5.0 kg/ cm2
Tensile strength - 3.0~5.0 kg/ cm2
Temp Range - -196 0c/ +230 0c