upshine up-dl105-8-25w triac dimmable led downlights€¦ · technical specifications model voltage...
TRANSCRIPT
Technical ApplicationGuide for UP-SHINELED DownlightUP-DL105-8-25W
Introduction It's an ultra thin integrated anti-glare grilling lens downlight. The height is less than 40mm with built-in driver, suitable for various applications. Grilling design effectively reduce the UGR index. Luminous efficiency 110lm/w. Equipped with push button looping connection terminal (LL-NN-EE), the simple structure provides easy access to installation and high security.
● Up to 70% energy saving compared to standard CFL● Long lifetime of 40,000 hours ● Triac dim● 90°wide beam angle●200-210mm cutout● CCT: 3000K 4000K 5000K 5700K● No UV/IR light● Environment friendly, without Mercury or any other hazardous substances
Application notes● IP54 at room side for indoor use only● Professional electrician for installation only ● Switch off before installation● Do not touch when in use● Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
www.upshine.com [email protected]
SAA
Technical SpecificationsModel Voltage Power Power
FactorLumen(±5%)
Beamangle CCT Lifespan CRI Dimmable Dimension
UP-DL105-8-25W AC100-277V 25W ≥0.9 2870 90o 3000K 40000h ≥80 No 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W AC100-277V 25W ≥0.9 2950 90o 4000K 40000h ≥80 No 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W AC100-277V 25W ≥0.9 3000 90o 5000K 40000h ≥80 No 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W AC100-277V 25W ≥0.9 2970 90o 5700K 40000h ≥80 No 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W-D AC230V 25W ≥0.9 2870 90o 3000K 40000h ≥80 Yes 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W-D AC230V 25W ≥0.9 2950 90o 4000K 40000h ≥80 Yes 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W-D AC230V 25W ≥0.9 3000 90o 5000K 40000h ≥80 Yes 228*228*43.5mm cutout 200-210mm
UP-DL105-8-25W-D AC230V 25W ≥0.9 2970 90o 5700K 40000h ≥80 Yes 228*228*43.5mm cutout 200-210mm
Product Information
Driver data SheetDriver data DIM Non dim
Input rated Voltage AC230V AC100-277V
Frequency 50Hz 50/60Hz
Input Voltage AC200-240V AC90-305V
Efficiency ≥85% ≥88%
Total load Wattage 25W±5% 25W±5%
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.14A ≤0.28A
Full load output Voltage DC40-50V DC40-58V
Rated output current 470mA 470mA
Output current range 470mA±5% 470mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100% —
Dimmer Triac dimmers —
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
THD ≤20% ≤20% (@230V)
Flick free No Yes
Withstand voltage — —
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
25W Ⅰ IP54 -20oC~45oC 0~90% -20oC~65oC
www.upshine.com [email protected]
228
228
43.5
Ø19
6
www.upshine.com [email protected]
Photometric Diagram
Spectral Distribution
Polar intensity diagram
Polar intensity diagram Polar intensity diagram
Polar intensity diagramBeam diagram
Beam diagram Beam diagram
Beam diagramCartesian intensity diagram
Cartesian intensity diagram Cartesian intensity diagram
Cartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 83.8 DEG
-/+180
-120
-90
-30
120
90
30
0
400
800
1200
1600
2000
0
UNIT: cdAVERAGE BEAM ANGLE(50%): 83.8 DEG
-/+180
-120
-90
-30
120
90
30
0
400
800
1200
1600
2000
0
UNIT: cdAVERAGE BEAM ANGLE(50%): 84.4 DEG
-/+180
-120
-90
-30
120
90
30
0
400
800
1200
1600
2000
0
UNIT: cdAVERAGE BEAM ANGLE(50%): 80.9 DEG
-/+180
-120
-90
-30
120
90
30
0
400
800
1200
1600
2000
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)20
18
16
14
12
10
8
6
4
2
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)20
18
16
14
12
10
8
6
4
2
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)20
18
16
14
12
10
8
6
4
2
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)20
18
16
14
12
10
8
6
4
2
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 69.08deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1908 lm
Height Eavg, Emax Angle: 66.00deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1795 lm
Height Eavg, Emax Angle: 72.29deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 2176 lm
Height Eavg, Emax Angle: 65.18deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1800 lm
3000K
3000K
4000K
4000K
5700K
5700K
5000K
5000K
380 500 600 700 800 380 500 600 700 800
380 500 600 700 800380 500 600 700 800
Wavelength(nm) Wavelength(nm)
Wavelength(nm)Wavelength(nm)
Max=9791 [1.0=20000] Max=8688 [1.0=20000]
Max=6381 [1.0=20000]Max=10151 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
2.96 SDCM F4000K
x=0.3863 y=0.3845
5.51 SDCM F5700K
x=0.3347 y=0.3589
1.69 SDCM F3000K
x=0.4428 y=0.4032
5.68 SDCM F5000K
x=0.3583 y=0.3744
90
80
70
60
50
40
30
20
10
0
11:1
3:13
11:2
5:10
11:3
7:10
11:4
9:10
12:0
1:10
12:1
3:10
12:2
5:10
12:3
7:10
12:4
9:10
13:0
1:10
13:1
3:10
13:2
5:10
13:3
7:10
13:4
9:10
14:0
1:10
14:1
3:10
14:2
5:10
14:3
7:10
14:4
9:10
15:0
1:10
15:1
3:10
15:2
5:10
15:3
7:10
15:4
9:10
16:0
1:10
16:1
3:10
16:2
5:10
16:3
7:10
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 84.4DEG
UNIT: cd
C0/180, 83.8 deg
C30/210, 85.1 deg
C60/240, 85.0 deg
C90/270, 83.8 deg
400
800
1200
1600
2000
0O
180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C.
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
www.upshine.com [email protected]
Packaging Information
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 53*49*35 0.78 20 20
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 304 6080 28
40'' standardcontainer 608 12160 56
www.upshine.com [email protected] Phone: +86 755 2919 7389Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
Installation Procedure
WARNING1.Switch off before installation.2.Switch on only after complete installation and examination of the circuit.3.Professional electrician for installation and maintenance only.
Turn Off power supply before starting any installation. Read instructions & check you have all the tools & accessories to complete the installation correctly.
6. Make sure the downlight fixed tightly in ceiling, turn on the power.
1. Open a hole according to the cutout size of led downlight.
3 . F e e d t h e m a i n A C w i r e L .N to the f a s t connection terminal block respectively.
2. Open the driver cover.
BrownL =
BlueN =
EARTH=
4. Fix the cover back.
5. Hold back spring clips then push downlight into the hole.