ups brochure v02 (9)

8/13/2019 Ups Brochure v02 (9)

1/3

BPL Telecom Private Limited11th KM, Bannerghatta Road, Arakere, Bangalore - 560 076.Ph:+91-80-2648 4314/4348/4350/4388/0209Business Enquiry:[email protected] Service: [email protected]

BPL PFE Series- The on-line UPS with Active Input Power Factor enhancement.

BPL PFE 101 (1/1) 10kVABPL PFE 301 (3/1) 10kVA - 40kVA

BPL PFE 303 (3/3) 10kVA - 40kVA

Applications:IT Majors, Data Centres, Cloud Service Providers, Computer Labs, Browsing & Internet CentresSurveillance Cameras & Equipment, Telecom & Networking Equipment with Fax, POS Devices, Critical & Emergency LightingHealth Care Systems, Operation Theatres, Diagnosis Equipment, Lifesaving Equipment, Treadmill & Gym,Educational Institutions, Printing Machines, Photocopiers, Digital Colour Labs, Recording Studios, Home Theatres.

BPL SCN - The on-line UPS specifically designed for MRI and CT Scanner applications of any make.BPL SCN (3/3) 60kVA - 150kVA

BPL IAN Series- The on-line UPS (with 0.9PF &


2/3

Grid Sharing / HybridSOLAR UPS

Grid Sharing SOLAR UPS Excellent load sharing between Solar and

Grid Ensures 100% utilisation of Solar power

by using a highly efficient built-in MPPTConverter

Rugged Industrial grade IGBT inverter with

complete galvanic isolation ensures highquality power delivery

Higher efciency battery charger ensures

extended battery life by providing temperaturecompensation and float cum boost charging

The primary source of power of the BPL Grid Sharing Solar UPS is Solar Power, the total load is shared between Solar & Grid during the mainsavailability and between solar & Battery during mains power failure. The UPS output gives conditioned power without change over & is ideal forcritical applications. When solar power is adequate to cater to the load demand, no power is drawn from the Grid and the solar power would take careof Battery charging, any short fall in solar power availability, the deficit power is drawn either from Grid or Battery.

BPL Grid Sharing Solar UPS comes with high efficiency of conversion of Solar energy, the output of MPPT is fed to the intelligent power sharing modulewhich ensures maximum power utilization from the solar Panel. 1 KW of Solar Power (Which nee ds a floor space of 3m X 3m) will save approximately5 Units of Electricity per day.

Featured products:Solar INVTS specially designed for irrigation pump sets. Three phase solar INVTS for industrial application, farm hous es, resorts, lifts and emergencylighting systems without battery and grid.

Application-specific solar UPS for: Educational institutions CT, MRI and ultrasound scanners

Solar Panel Grid / Mains Power

MPPT Converter

BATTERY

Temperaturecompensated

Float cum BoostCharger

Power monitoringand Sharing Mode

IGBT Inverter withGalvanic isolation

OUTPUT

Indigenous Design as per international standards ensures value for investment with long product life.

SALIENT FEATURES

BPL power conditioning UPS Systems reduce wear

and tear on expensive equipment connected to your

power supply and prevent break-downs Process losses due to unexpected power stoppagesare eliminated

Our robust products eliminate the need for frequent

maintenance and minimise disruption of work BPL UPS Systems are highly efcient and reduce the

total cost of ownership

BPL Telecom, an early Indian pioneer inCommunications and Power Sector Electronicsnow brings you a range of power conditioningsolutions and on-line UPS systems. Our productsare supported by trained sales and service teamsspread across the country. We can respond toyour needs at short notice to provide you with asolution that meets your specific needs.

BPL IAN Model (60 KVA to 240 KVA)

Input PF 0.9 and 0.9

Power walk in Soft start for 0 - 20 seconds walk-in

Technology Double conversion On-line with the latest MPWM technology using IGBT

Rating 60KVA - 240kVA

DC Bus 360V DC


3/3

MODEL BPL PFE Series BPL SCN (CT & MRI Scanners)

RATING 10 kVA (1 -1) 10 - 40kVA (3-1) 10 - 40kVA (3 - 3) 60 - 150kVA (3 - 3)

DC BUS 192V 360V

TECHNOLOGY Double conversion On-line with the latest MPWM technology using IGBT

INVERTER TYPE IGBT based MPWM with instantaneous sine wave control

POWER FACTOR 0.8 lag

NOMINAL VOLTAGE 220 VAC / 230 VAC 220VAC / 230VAC400 V Ph- Ph :230V

Ph - Neutral200V Ph - Ph : 115V Ph - Neutral

REGULATION ( ) 1% ( ) 1% Balanced & unbalanced load

FREQUENCY 50 Hz 0.1Hz

WAVE FORM True Sine wave

TOTAL HARMONIC LINEAR LOAD < 2%

DISTORTION NON LINEAR LOAD < 6% < 5% < 6%

TRANSIENT RESPONSE Remains within +/- 5 % & recover to normal within 20msec

OVER LOAD CAPACITY

100% Continuous

125% 1 Minute

150% 5 Seconds

NOMINAL OUTPUT CURRENT 34.8A 70A 23A - 35A 140A - 346A

CREST FACTOR 3:1 4:1

MODE OF OPERATION Designed for continuous operation

ISOLATION True online with complete galvanic isolation I/P to O/P galvanic isolation

INVERTER PROTECTIONAdvanced Electronic Protection for device safety backed up with MCBs & fast acting fuses, high speed pulse bypulse electronic device protection over voltage / under voltage protection, Electronic over current trip with reset.

MANUAL BYPASS Provided

OVERALL EFFICIENCY @100% LOAD > 87% > 90% >88% > 93%

ALARMS Input / Low / Fail, Output overload, Over temperature, Battery low

LED INDICATIONS Mains on, Charger on, Inverter on, Battery Low, Overload, Inverter Trip

U SE R F RI EN DLY LC D D IS PL AY I np ut Vo lt ag e, Ou tp ut vo lt ag e, Lo ad pe rc en ta ge , O ut pu t f re qu en cy, Ba tt er y v ol ta ge

CHARGER TYPE CVCC CCCV

ENCLOUSER PROTECTION GRADE IP - 20

COOLING Forced air

ACOUSTIC NOISE LEVEL 0.95 >0.9

POWER WALK IN Soft start for 0-20 seconds power walk-in

INPUT

N t S ifi ti i di ti f t d d d l d bj t t h ith t tiN t S ifi ti i di ti f t d d d l d bj t t h ith t ti

MODEL BPL GSS 101 BPL GSS 301 BPL GSS 303

TECHNOLOGY MPPT based Grid sharing solar technology

RATING 1 Input - 1 Output 3 Input - 1 Output 3 Input - 3 Output

CAPACITY 10kW 10kW ~ 40kW 10kW ~ 100kW

DC BUS 192V 192V - 360V 360V

TECHNICAL SPECIFICATIONS - BPL GSS SERIES GRID SHARING SOLAR UPS

UTILITY POWER INPUT

PROTECTIONS

EFFICIENCY AS PER IEC 61683

MUTI-FUNCTIONAL SOLAR LCD ENERGY METER

INVT

INVT

RECTIFIER

TECHNICAL SPECIFICATIONS - BPL PFE & SCN SERIES UPS

BATTERY

SOLAR INPUT

INPUT VOLTAGE 230V -1 415V - 3 - 4 Wire 415V - 3 -4 Wire

INPUT VOLTAGE WINDOW 170 - 270V 330 - 470V 330 - 470V

INDICATES FOLLOWING PARAMETERS Solar Voltage Solar Current Solar Power Solar Energy generated (Generated & delivered to Load)

Input Voltage Output Voltage Battery Voltage Load Current

Under Voltage / Over voltage Over Temperature Battery Low Over Load Short Circuit

ENCLOSURE PROTECTION IP-20

INVERTER TYPE IGBT based MPWM with instantaneous Sine wave Control

POWER FACTOR 0.8 lag

NOMINAL VOLTAGE 230V / 50Hz 230V / 50Hz 400V / 50Hz

REGULATION-BALANCED LOAD ( ) 1% ( ) 1% ( ) 1%

REGULATION-UNBALANCED LOAD NA NA ( ) 1%

UNBALANCED LOAD PHASE SHIFT NA NA 120 0.5

OVER LOAD CAPACITY 125% for 1 Minute : 150% for 10 Seconds

CREST FACTOR 3:1

BATTERY TYPE SMF / TUBULAR

CHARGER TYPE Float cum Boost / CCCV

TEMPERATURE COMPENSATION 5 mv / Cell / C variation

CHARGING CURRENT 0 - 30A 0 - 40A 0 - 50A

OPERATING MPPT VOLTAGE 150V - 180V 180V - 330V 330V

MAXIMUM PANEL CURRENT 50A 100A 250A

REVERSE POLARITY PROTECTION Short Circuit Diode

BACK FEED PROTECTION Protected using reverse diode

MPPT EFFICIENCY 96% ( Peak)

CONFIGURATION Grid Sharing

SHARING METHOD Parallel Operation of Solar and Grid Power

S HA RI NG PE RC ENTA GE 0 - 1 00 % d ep en di ng on th e a va il ab ili ty of so la r p ow er ag ai nst th e p ow er De ma nd of th e lo ad .

OVERALL EFFICIENCY- 100 % LOAD 90% 92% 93%

TESTING STANDARD As per IEC 62040 - 3 / IEC 61683

ups brochure v02 (9)

Documents