upe Inventory update

upe Inventory updateNIS & GRANITE

Contents

1. Gather information about UPE order2. NIS Updatea. Create Locations & Sitesb. Create Circuit Design3. Granite Updatea. Reservationi. Update Containersii. Update Portsiii. Update Pathb. Physical Groupc. Port changes update

1. Gather information about UPE orderCollect the details of the UPE order from ANDs email/NOVA system/etc..Gather the information and keep it in the master list/excel file.

2. NIS Update Login to NIS Clarity System

a. Create Locations & Sites Go to Inventory Tab and click Location/Sites

Input the details similar as the master list. Then SAVE.

Customer Details

Exchange abbrCustomer NameUPE Hostname

Customer Premis

Here is the output when you SAVE the information.

b. Create Circuit Design Click inventory and go to circuits and then click to circuit designMain/Protect

Auto generatedMEM TRKExch abbrUPE hostname

1GBPS

TM INFRA

i. Part of cross connections Seq : 10 Xconnect : PHY

Seq:20Xconnect: PHYii . Part of To Loc: Ne Type: FT[AC or TX] Index : F (FOC template) Card/port : unreserved

Input the details and ensure the information is correct. Click SAVE.

Once saved, copy the NIS BEARER ID for future use in Granite.

3. Granite Update Login to Granite Inventory

a. Reservation

Click resources > Reservation Input service ID in field Name Click begin research Double click result

i. Containers Double click result Go to interface for update device ID and loopback ip. Also change the status to in service. After change the details click SAVE

Loopback IPChange the status to in service

a. Containers & Shelves Double click the result Go to interface for update device ID and loopback ip. Also change the status to in service. After change the details click SAVE The step same with containers

b. Slot/card Select all port > flash > status Change the status to AVAILABLE Find the port need to in service such as G 0/25 or G0/26 Highlight the port and go to flash > status Change the status INSERVICE And then SAVESAVE

Highlight all and port need to inservice Flash

ii. Port Check primary and secondary port Click to TM PORT Click modified and go to lag ID and serial IP Check lad ID and serial IP Change the status to INSERVICEPut the lad ID 1 or 2Change the status

Serial IP

iii. Paths Double click result Go to the TM PORT > Lag ID > Serial IP Change lag ID and serial IP Change the status to the INSERVICE TM BEARER ATTRIBUTE put the (NIS BEARER ID) NIS BEARER ID

b. Physical GroupResources > Physical Group Input Group ID in the field name Click begin research Double click result Go to the TM PORT > Lag ID > Serial IPInput group ID

The step same with the paths

In services parents reservation and physical groupIn service parent

c. Port changes update