Samsung sph-n240, n400, a460, a500, etc Nam Programming :Nam Set: ##SpcTest Mode: 47*869#1235Debug Menu: ##33284,okService Menu: Menu+8+0 (#889)Reset (Life time, Clear Memory, etc): ##786,okA-key: ##2539,okLabel Selection: ##3882,okLabel(Home, Work, etc) : **523,okNGG Setting (Gateway, etc.): ##2769737,okVocoder: ##8626337,okCAI Change: ##7738,okEnable TTY: ##889,ok Samsung a530, a610, a620, a660, a670, etc Nam Programming :Nam Set: Menu, 6, *Nam Set: ##3238, okNam Set: ##SPC (##000000), okService Menu: Menu, 9, *Test Mode: 47*68#13580Test Mode: 47*869#1235 Samsung X, E, V, S-series (korean models), e250, v420, s350, etc Nam Programming :Nam Set: 6548#0**4#6Nam Set: 47*869#08#9Nam Set: 74153697193Test Mode: 5809540*45680 (88 - EFS reset)Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415Debug Menu: Home(top of keypad)+0, 6725 or 9720 or 1973 or 0415 Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :Nam Set: 47*869#08#9Nam Set: Menu+60Test Mode: *759#813580Test Mode: 5809540*45680A-key:  Menu+0, 25##External Audio: Menu+0, ####Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or SpcBrief NAM Programing: Menu+40,626 (not all version)LCD Contrast: Menu+45 (not all version)SIO Mode: Menu+49SIO Mode: Menu+69 Samsung N356 (India version) Nam Programming :Test Mode: Menu, 5, down arrow, *Test Mode: **00## (in some flashes) Samsung i700, etc Nam Programming :Nam Set:  Go to start and select "PHONE" from the drop down menu, dial #83587 Samsung i300, etc Nam Programming :1. Tap on the Phone Icon with stylus2. Press #907*9#0 ENTER LOCK should appear on screen3. Enter OTKSL4. SVC MENU will appear press 15. Enter 10 digit MIN and then press SAVE6. Press SAVE again7. Press 3 and then press SAVE 6 times8. Enter the HOME SID and press SAVE once9. Press END key twice  TEST MODE COMMANDS:n105_test_mode.txta500_test_mode.txta530_test_mode.txt  

 <<KYOCERA>>

Kyocera 2345, 3035, 5135, 6035, Se47, KX, KE - series, etc Nam Programming :Nam Set: 111111+Jog Dial(Ok)CAI Change: ##7738,okEnable TTY: ##889,ok

Life Timer: ##786,okA-key: ##2539,ok Tips:On some kyocera handsets the factory service module has not been disabled and the phone can be programmed without the Spc by inputting:Nam Set: ##333333 menu (service) Qualcomm qcp-800 Nam Pogramming :Nam Set: Menu+3+0+SpcField Test: Menu+7+0+Fsc   

<<SANYO>>

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :Nam Set: ##Spc+Ok+Key Down+OkAdvanced Setup: ##3282+Ok+Key Down+Ok+MslA-key: ##2539+Ok+Key Down+OkVersion: ##**837+Ok+Key Down+OkDebug Menu: ##FSC+Ok+Key Down+OkAirtime menu: ##8463+Ok+Key Down+Ok Change CAI: ##7738+Ok+Key Down+OkVocoder: ##8626337+Ok+Key Down+OkReverse Logistic: ##786+Ok+Key Down+OkSet IP Address: ##2769737+Ok+Key Down+OkTTY On/Off: ##889+Ok+Key Down+OkReady Link: ##4636+Ok+Key Down+OkBrowser Init On/Off: ##4682+Ok+Key Down+OkPicture Token: ##25327+Ok+Key Down+OkUnknown Code: ##5282277+Ok+Key Down+Ok(SPC=000000, FSC=040793) Sanyo scp-A011,  smp-A017, etc Nam Programming :Nam Set: F9(3 beep) + 0*72696#767   

<<AUDIOVOX / UTSTARCOM>>

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :Power the phone ON and wait until the little light on top goes out, then press:Nam Set: 289,Fcn, #,1Service menu: Fcn,0,0, FSC Power the phone ON and press:Test Mode: Hold (2,*,Rcl) + Power Test Mode Commands:99 - download - flash phone124 - inam data write125 - version126 - get ESN127 - get SPC128 - get User lock129 - is WFTV data write137 - get FSC code138 - NPcode (nam program code)139 - dscode141 - restart218 - Read_Addr000 - is cdma mode001 - is fm mode002 - is pcs mode008 - is reg read addr020 - is lna_range Audiovox (Hyundai) cdm-100, 130, 135, 8300, 8500, 8600, 8910, etc Nam Programming :Nam Set: ##20022002, endRead user lock: #5625*, endPort settings: ##7678, endDM baud rate: ##2283, endDM mode enable: **1004, endDS mode enable: **1005, endMisc. Test: ##27752345, endS/W Test1: ##27732726, endS/W Test2: ##2240, end

Debug screen: ##2773, endClear MRU: ##6782, endRfnu_Contents: ##2250, end?????: ##1133, end?????: ##1144, endP_Rev: ##7738, endGPS Test: ##4771, endA-Key: 2538**SMS Eng: ##767364, endBattery_adc: ##2768, endTests: ##1122, end Audiovox 8610, 8910, etc Nam programming :Name Set: ##847446, end, 111111 Audiovox pcx-3500xl Nam Programming :Nam Set: ##2726+Send+1998+1+Spc+1 Audiovox-107 Nam Programming :Nam Set: 45680*47*869#1 Audiovox CMP-3 Nam Programming :Nam Set: 45680*47*869#1Dm Mode: Menu, 6, 6 Audiovox 9950 Nam Programming :Nam Set: ##3282 Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :Nam Set: m + # + envelope key + * + 1 Audiovox Thera (Toshiba 2032) Nam Programming :Thera Nam Programming User Manual - nam_thera.pdf Audiovox (UTStarcom) PPC 6600, 6700, etc Nam Programming :Nam Set: ##SPC + SendNam Set: #*#SPC + SendNam Set: ##SPC#DM mode: ##3424 + SendDM mode: #*#3424 + Send

DM mode: ##3424#Programming User Manual - programming_instructions.pdf   

<<MOTOROLA>>

Motorola 7760, 7860, 2260, 8160, etc Nam Programming :Nam Set: Fcn,0000000000000, RclNam Set: 74663#, Fcn, FcnTest Mode: Fcn, 00**83786633, Sto Motorola v60c, v120c etc Nam Programming :Nam Set: 74663#, Menu, Menu, SpcNam Set: Menu, 073887, * (type quickly)Test Mode: Menu, 073887*, SpcDebug Mode: ##33284 Force the phone into DIGITAL ONLY mode:1) ##33284 (Debug)2) RIGHT Softkey (Next) Twice3) Down arrow 10 times to "PrefMod"4) RIGHT Softkey (Change) until you see "DigOnly"5) LEFT softkey (Exit)6) MENU then LEFT Softkey return to idle screen7) ##33284 (The last 4 will not display if you have done it correctly) Motorola Razr V3C Nam Programming:Nam Set: 74663 # clr clrNam Set: #073887* , then SPC Motorola Q Nam Programming:Nam Set: [Send] + 074663 + [Send] + [Send], Selecct NAM# Motorola t182, c210, etc Nam Programming :Nam Set: ##298645665, endShort Nam: ##073887, stoDebug Menu: ##1111, endService Menu: ##2222, endSound NS/EC on/off switch: ##1113, end

 Motorola v710, v730, v740, ms150, etc Nam Programming :Nam Set: 8378*# + press 3 times NATE (spc - 071082)Test Mode: Menu, 073887*, SpcService Menu: #758353266#646# Motorola StarTac 2004 Nam Programming :Nam Set: 5759789*#, press "Rec" button 3 times, (spc - 915037) Motorola ms200, ms400, ms800, etc Nam Programming :Nam Set: 5759789*#, press "Camera" button 3 times, (spc - 915037)Nam Set: 246791538*#, press "Camera" button 3 times, (spc - 915037) Motorola v6060 Nam Programming :Nam Set:147*369#456*0#  MOTOROLA TEST MODE : v60, c120, c331, etc:1) Turn on the phone. Press MENU 0 7 3 8 8 7 *2) The phone will require you to "Enter a Security Code", press 000000, OK3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"    choose SELECT. Your phone is now in test mode.4) Signal strength is the 3_rd number down on the left hand side of the screen.5) To toggle between regular mode and test mode: Press MODE then    quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.6) To turn off the test mode the phone must be in regular mode, then follow    the above sequence and scroll down to where it says "DISABLE" instead of    "ENABLE" and choose select. Motorola Bible (old models) - bible.txt   

<<NOKIA>>

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :

Nam Set: *3001#12345#Software Version: *#837#Software Version: *#9999#Esn Number: *#92772689#Restart Phone: *#75681#Restart Phone: *#75682# Nokia 8887 Nam Programming :Nam Set: *3001#12345#Version: *#0000#Evrc: *#8378#Esn/Data/Timer: *#92772689#SID: *#743# Nokia 8587 Nam Programming :Nam Set: *#626#7764726#A-Key: #8159357022#4579# (26 digits)A-Key: #8159357022#4547# (20 digits)Version: *#0000#Version: *#837#Vocoder: *#3872#Change language: Menu 5, 3, 1Change DM mode: *#7678#Debug Screen: *#8378#Debug: *#8380#Field Test Menu: *#83788# SPC Unlock, Factory Reset :Full Factory Reset: *#7370#Resets all settings including non-user changeable items (like SPC)  NOKIA TEST MODE: 51xx, 61xx, 71xx, 3285, 63xx, etc :1) Turn on the phone. Press *3001#12345#2) Scroll up to where it says "Field Test" and choose SELECT3) Highlight "Enable" and choose OK. Turn the phone off then back on.4) If the test mode screen does not show up press MENU and scroll     down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.6) To turn off the test mode press MENU and scroll down to where it says    "Field Test" choose SELECT. Press 0 0 and then choose OK. 3360, 6360, etc :1) Turn on the phone. Press *3001#12345#2) Scroll up to where it says "Field Test" and choose SELECT3) Highlight "Enable" and choose OK. Turn the phone off then back on.4) If the test mode screen does not show up press MENU and scroll     down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.5) Lower left or upper left number is the signal strength.6) To turn off the test mode press MENU and scroll down to where it says    "Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.   

<<LG>>

Lg LX,VX-series, VX4400, VX6000, etc Nam Programming :Nam Set: ##Spc(#)Nam Set: Menu, 0Advanced Settings: ##2342(#)Vocoder: ##8626337,ok(#)CAI Change: ##7738,ok(#)Enable TTY: ##889,ok(#)A-key: ##2539,ok(#)Reset (Life time, Clear Memory, etc): ##786,ok(#) lgc-300, etc Nam Programming :Nam Set: Menu, 9, SpcA-key: Press "Sto" 3sec, 2539** lgc-330w, etc Nam Programming :Nam Set: Menu, 4, 0, SpcA-key: 2539** lgc-510, v111, etc Nam Programming :Nam Set: Menu, 3, 0, SpcA-key: 2539** 

lgc-500, 800w, etc Nam Programming :Nam Set: Menu, 9 , 0, SpcDebug Mode: Menu, 7, 0, FscDebug Mode: Menu, 8, 0, FscA-key: 2539**   

<<ERICSSON / SONY-ERICSSON>>

SonyEricsson T608, etc Nam Programming :Nam Set: 923885, joystick >, 111111Nam Set shot: 987, joystick >, 111111Nam Set long: 222652, joystick >, 111111Vocoder: ##8626337, joystick >, 111111Debug screen: ##33284, joystick >Life Timer: ##786, joystick >SW ver: 9#4#3#, joystick >Edit Profile: ##3282, joystick >Service menu: *#06* Ericsson A1228c, T61, etc Nam Programming :Short NAM: 987+MenuLong NAM: 923885+Menu+SpcCDMA Mode: 904093+MenuAnalog Mode: 904095+MenuQNC: 904097+MenuDebug Screen: 904090+MenuDM Mode: 904050+Menu   

<<EPSILON / COMPAL>>

Epsilon vc-5x, Compal 1100, etc Nam Programming :Nam Set:: **321456987##Short Nam: **147258963##Service Menu 1: **1232580##Service Menu 2: **078987##Service Menu 3: **1234756##

Show SPC: **3214569871472365##Version: **1470963##Debug: **000000##A-key: 2539**Reset: **14789##   

<<SK TELETECH>>

Sky All Models Nam Programming :Nam Set: #7583538324#626#Nam Set: *759#364*7388464#Min simple mode: #758353266#646#Irm simple mode #758353266#476#Voice memo: #8767#277#Test Mode: #7583538324#8378#A-key: #758353266#2539#Service Menu: Menu+4+0+SpcService Menu: Menu+5+0+Spc

   

<<WITHUS / MODOTTEL>>

Withus wce-100, 200, 300, etc Nam Programming :Nam Set: ##948487+SaveNam Set: ##948482+SaveESN write: ##66835+Save (wce200 only)SMS Settings: ##76766NVM Rebuild: ##777464

   

<<GTRAN>>

Gtran gcp-2000 Nam Programming :Nam Set: 01#737+SpcDebug Menu: 01#324+SpcDebug Mode: 01#727

Test Mode: 01#764+SpcSystem Test Mode: 01#768+Spc Gtran gcp-5000 Nam Programming :Debug Mode: 01#727+SpcTest Mode: 01#765

   

<<HYUNDAI>>

Hyundai hwp-110 Nam Programming :Nam Set: #86904**89397#DM Mode: ##2740*(Open phone, inter code, close phone) Hyundai hgc-120, 130, 200 Nam Programming :Nam Set: #86904**89397# Hyundai hgc-310, 600, 610 Nam Programming :Nam Set: ##20022002, end, 1, Spc CodeField Test: ##20022002, end, 1, Master Code Hyundai Curitel h100, 150,  hx510b, 520, etc Nam Programming :Nam Set: ##20022002, end, 1, Spc CodeField Test: ##20022002, end, 1, Master CodeA-key: 2539**Debug Menu: ##27732726, endSar Test: ##27752345, endBaud Rate: ##36**, endDM mode enable: **1004, endDS mode enable: **1005, endTest Bell/Voice/Led/Dot: ##1122, endRF Mode: ##2240, endRas Ram: ##2774, endCmux1: **0481, endCmux2: **0482, endRX Mode Fax: **0492, endRX Mode Data: **0491, endRX Mode Reset: **0490, end

   

<<HUAWEI>>

Huawei ETS-668, 678, 688, etc Nam Programming :Debug Mode: ##44+MenuDebug Screen: ##33+MenuCDG2 Test enable: ##234+MenuCDG2 Test disable: ##432+MenuChina Lang Select: ##123+MenuBlocking Debug Code: ###888+MenuHome System Only On: ##461+MenuHome System Only Off: ##460+MenuMaster Code for all Huawei models is  -  309296   

<<PANTECH / CURITEL>>

Pantech hx-525b, 550, 570, 575, etc Nam Programming:Nam Set: ##13*92*#62* + PwrDebug Mode: ##*193*762534#* + Pwr (R-UIM mode disable)Debug Mode: ##27732726 (R-UIM mode enable)DM Mode Enable: ***18*#826*Full Reset: ##03*934#9367*192#397#7412569746 + PwrMultiTest: ##22635*262* + PwrCmux1: ***12*#811# + PwrCmux1: ***37*#922* + PwrRX Mode Data: ***83*#247 + PwrRX Mode Reset: ***64*#133# + PwrDS Mode On: ***12045#*# + PwrRF NV Init: ##0*#*63861829372# + PwrRAS_RAM: ##3*13091#1279#* + Pwr   

<<TREO>>

Palm One Treo 600, 650, 700, etc Nam Programming :

Nam Set: ##SPC + SendNam Set: #*#SPC + SendNam Set: ##SPC#DM mode: ##3424 + SendDM mode: #*#3424 + SendDM mode: ##3424#Debug: ##33284Programming User Manual - programming_instructions.pdfResetting Treo - resetting_treo650.doc   

<<AXESSTEL>>

P800, T800, P1900, T1900, etc Nam Programming :Nam Set: 47*68#47*869#DM mode: ##9* + SendData cable select: menu + 7 + 1 + #Data Manager: **##11Data (Internet): **##13Data USB: **##32   

<<VK MOBILE>>

VK-100C, 110C, 200C, etc Nam Programming :Nam Set: 153147539741593Test Mode: 153147539123258 (88 - clear efs (set language to korean before))   

<<GIGA TELECOM>>

Z510, Z710i(gcd-456) Nam Programming :Nam Set: Menu+0+Spc   

<<AnyDATA>>

AMC450 Nam Programming :Nam Set: *74269#*748#96148063+SEL   

<<ZTE>>

ZTE C150, C160, C170, C180, C220, etc Nam Programming:Nam Set: *983*3641#  (R-UIM mode)Nam Set: #1463*389* ZTE C201 Nam Programming:Nam Set: *983*7358#   

<<UBIQUAM>>

U100, U105, U200, U300, etc Nam Programming :Nam Set: ##3435871BREW Set Menu: ##8242739System Test: ##33582Handset Test: ##3435873Handset Test: ##3435875Factory Test Mode: ##3435874   

<<SYNERTEK>>

Synertek S200 Nam Programming :Nam Set: Menu+0+SpcA-Key: 2539**+SaveTest vibro/rx/tx: ##5555+SaveDebug Screen: ##33+SaveDebug Screen: ##523+SaveRF Test: ####+SaveLCD type: ##325+Save

 Synertek S500 Nam Programming :SAR Test Strife test: *#0000#Debug screen: *#8378#Clear LCD: *#848378#Debug menu: *#443336# (R-UIM mode)CDG , Service option: *#234#Function Test, LCD Contrast: *#878#   

<<SONY>>

Sony CM-M1300, 3300, Z200 Nam Programming :Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc