universiti teknologi malaysia undergraduate...
TRANSCRIPT
1
Unde
rgra
duat
e Ha
ndbo
ok
201413
Semester II
UTMUNIVERSITI TEKNOLOGI MALAYSIA
Faculty of Mechanical Engineering
FORPART
TIMESTUDENTS!
2
Dear Student,
I am grateful to the ALMIGHTY Allah S.W.T for enabling me to give a few words in this Undergraduate Handbook 2013/2014 for Part-time Students.
Welcome to the Faculty of Mechanical Engineering (FKM), Universiti Teknologi Malaysia (UTM), the Research University. I would like to congratulate all new students for being offered admission to our faculty. As a dean, I hope the opportunity given will be used wisely and you will do your best to acquire the knowledge, experience and exposure necessary to be a successful future mechanical engineer produce by a leading engineering university in this country.
The mission of our faculty is to develop the nation through human resource required by the nation through training, development, dissemination of knowledge, research and consultancy. As a new student to this faculty, you will be part of us working together to make this faculty become a world-class Mechanical Engineering Faculty.
The faculty, staffs, and administrators at Faculty of Mechanical Engineering, UTM are committed to your success. We truly believe that by becoming part of FKM you are taking the step toward making your dreams a reality! Good luck!
PROFESSOR IR. DR. ROSLAN ABDUL RAHMANDean,Faculty of Mechanical Engineering, Universiti Teknologi Malaysia.
Forward by theDean of Faculty
3
Assalamu’alaikum and Greetings
I take this opportunity to thank you and express my profound congratulation to all new students for taking such decision to enroll with Universiti Teknologi Malaysia (UTM) for Bachelor of Engineering (Mechanical) programme. This is the start of an exhilarating journey of knowledge and discovery as you work towards obtaining a qualification that will prepare for your future career. You are now part of us and will play a vital role in ensuring that our University increases its pace toward achieving its goal. This engineering programme is offered by the Faculty of Mechanical Engineering, UTM at various learning center and administered professionally by the School of Professional and Continuing Education (UTMSPACE). During the programme, the students will face many challenges at many levels which require full commitment and endurance to enable success. I really hope that you will strive your utmost to be a successful future Mechanical Engineer. This Handbook contains brief information of the programme and will serve as the main source of reference related to the curriculum and academic matters. Students can always refer to the handbook and consult their center coordinator to plan for their studies. The learning center coordinators also will act as the Academic Advisors to the students and will provide the necessary advises related to academic issues.
On behalf of the faculty, I welcome you once again to UTM and wish all new students a successful memorable experience with us and all the best in your studies and have an enjoyable journey during your stay in UTM. Wassalam.
HJ MOHD YUNUS BIN HJ ABDULLAHAcademic Manager for External Programmes,Faculty of Mechanical Engineering, Universiti Teknologi Malaysia.
Welcoming words by the Academic Manager
4
PHILOSOPHY OF THE UNIVERSITYThe divine law of Allah is the foundation for science and technology.
Universiti Teknologi Malaysia strives with total and unified effort to develop excellence in science and technology for universal peace and prosperity,
in accordance with His will.
VISION OF THE UNIVERSITYTo be recognized as a world class centre of academic and
technological excellence
MISSION OF THE UNIVERSITYTo be a leader in the development of human capital and innovative
technologies that will contribute to the nation’s wealth creation
VISION OF THE FACULTYTo become a world-class Mechanical Engineering Faculty
MISSION OF THE FACULTYTo develop the human resource required by the nation through training,
development, dissemination of knowledge, research and consultancy
OBJECTIVES OF THE FACULTY• To develop quality human resource at undergraduate and post-graduate levels.• To assist the industry through basic and applied research.• To forge cooperative network with the industry in areas of mutual benefit.• To disseminate knowledge through the publication of research papers, journals, books and reports.• To develop its staff.
CLIENT’S CHARTERRealizing that the main role of the Faculty is developing human resources in the field of Mechanical Engineering to fulfill the needs of the country, university and society, we hereby pledge• To produce capable and ethical Mechanical Engineers;• To design and implement a world class curriculum recognized by Professional Bodies;• To provide efficient, ethical and professional staffs who are capable of executing quality academic and administrative tasks in a planned, orderly and controlled manner;• To provide suitable and conducive infrastructure for teaching and learning;• To be concerned of students self-development.
5
Organisation Structure
Academic administration in relation to Fac. of Mech. Eng. UTM
Academic administration in relation to UTMSPACE
DirectorUTMSPACE
Director of Part Time StudiesUTMSPACE
Academic Manager for External Programmes FACULTY OF MECHANICAL ENGINEERING
Coordinators
Academic MattersLearning Centers
JohorBahru
Pulau Pinang
Kuala Lumpur
Ipoh
Kuantan Undergraduate Project
Industrial Training
IT Manager & Examination
DeanFACULTY OF MECHANICAL ENGINEERING
Deputy Dean (Academic)FACULTY OF MECHANICAL ENGINEERING
Academic Manager for External ProgrammesFACULTY OF MECHANICAL ENGINEERING
Coordinators
Academic MattersLearning Centers
JohorBahru
Pulau Pinang
Kuala Lumpur
Ipoh
Kuantan
Undergraduate Project
Industrial Training
IT Manager & Examination
Kota Kinabalu
Kota Kinabalu
6
Academic Calendar
The University Academic Year is divided into two regular semesters namely Semester I and Semester II. Each semester consists of 14 weeks. Apart from the regular semesters, the University also runs a short semester (Semester III), which is held during vacation period at the end of the academic year. This semester is not taken into account in the maximum study duration stipulated for a particular program.
THE ACADEMIC YEARSemester I
Lectures 15 weeksStudy Week 1 weekFinal Examination 3 weeksEnd of Semester I vacation 4 weeks
Semester IILectures 15 weeksStudy Week 1 weekFinal Examination 3 weeks
TOTAL 42 weeks
Semester III (During end of Semester II vacation)
Lab courses 1 weekLectures and Examination 8 weeksEnd of Semester III vacation 1 week
TOTAL 10 weeks
7
Learning Centers
Currently, there are 6 Learning Centers offering the Bachelor of Engi-neering (Mechanical) programme. Locations of the Learning Centre are as follow:
Learning Centers Locations01 JOHOR BAHRU FKM & FKA UTM Skudai,
Johor03 PULAU PINANG Bangunan D’Piazza Mall, Bayan Baru, Pulau
Pinang04 KUALA LUMPUR (i) KL International Campus, Jalan Semarak,
Kuala Lumpur(ii) Bangunan UTMSPACE, Jalan Tun Razak, Kuala Lumpur
05 IPOH Institut Teknologi Perak, Greentown Square, Ipoh, Perak
08 KUANTAN IKIP International College, Kuantan, Pahang11 KOTA KINABALU Kolej Yayasan Sabah, Sembulan, Sabah
Facilities
All Learning Centers are well-equipped with lecture halls, lecture rooms and computer laboratories. All Part-Time students are eligible to make use of the libraries of the institution. UTMSPACE supplies the libraries with specific books relevant to the programs offered.
8
FKM External Programmes Office Staff
Academic Manager
Hj Mohd Yunus bin Hj AbdullahFKM External Programmes Office
Room: C24 114-02Tel: 07-5534861 013-7207887Email: [email protected] [email protected]
Administrative Assistants
(i) Mohd Idham bin Jemain (ii) Sharifah Zainab binti Syed Mansor
Room: The Office of External Programmes (C24-114-02)Tel: 07-5534726Fax: 07-5577782Email: [email protected] [email protected]
9
Learning centers & Academic matters
Coordinators Contacts
JOHOR BAHRU(01)
(i) Hj Mohd Zubil bin Bahak
(ii) Afandi bin Dzakaria
(iii) Dr.-Ing. Zair Asrar bin Ahmad
07-5534737/ [email protected]
07-5534653/ [email protected]
07-5534700/ [email protected]
PULAU PINANG(03)
Ahmad Zafri bin Zainuddin
07-5534701/ [email protected]
KUALA LUMPUR
(04)
(i) Abd Rahman bin Musa
(ii) Mohd Kamal bin Ariffin
(iii) Dr. Raja Ishak bin Raja Hamzah
07-5534638/ [email protected]
07-5534738/ [email protected]
07-5534604/ [email protected]
IPOH(05)
Ahmad Zafri bin Zainuddin
07-5534701/ [email protected]
KUANTAN(08)
Dr. Zulkarnain bin Abdul Latiff
07-5534758/ [email protected]
KOTA KINABALU(11) Dr. Zaini bin Ahmad 07-5534647/ 012-7170581
TRAININGDr. Zaini bin Ahmad 07-5534647/ 012-7170581
PROJECTAfandi bin Dzakaria 07-5534653/ 013-3999275
[email protected] MANAGER & EXAMINATION
Zulkepli bin Hj Muhamad
07-5534746/ [email protected]
10
Entry Requirements For Bachelor In Engineering (Mechanical) Programme
Minimum Entry Requirements for Diploma holders/ Equivalent.
1. University General Requirements
1.1 Passed SPM or equivalent with a credit in Bahasa Melayu/ Bahasa Malaysia or a credit in Bahasa Melayu/ Bahasa Malaysia, July paper.
1.2 Obtained a Diploma or equivalent qualification recognized by the Malaysian Government (accredited by MQA) and approved by Senate with at least a CGPA of 2.75 or obtained a Diploma or equivalent qualification recognized by the Malaysian Government (accredited by MQA) with a minimum of two years working experience in an engineering environment.
2. Program Specific Requirements
2.1 Passed with a credit in Mathematics and Physics at SPM level or equivalent.
OR Obtained at least ‘C’ Grade in any one of the Mathematics courses at
Diploma level.
2.2 Do not have any health problems that may affect their studies.
NotesCandidates are required to submit to UTM, a detailed transcript of the examination results during the course of their study for Diploma (from the first semester to the final semester). They are also required to submit a copy of their Diploma or a letter verifying completion of their study.
Successful applicants must take and obtain at least a Band I in Malaysian University English Test (MUET) within two years from their first registration to the program. The actual year of entry and duration of study are subject to credit exemption approved by UTM.
11
BACHELOR OF ENGINEERING (MECHANICAL) PROGRAMME SPECIFICATIONS
1. Programme Name Bachelor of Engineering (Mechanical)
2. Final Award Bachelor of Engineering (Mechanical)
3. Awarding Institution Universiti Teknologi Malaysia4. Teaching Institution Universiti Teknologi Malaysia5. Programme Code SKMM6. Professional or Statutory
Body of AccreditationEngineering Accreditation Council
(EAC)7. Language(s) of
InstructionBahasa Melayu and English
8. Mode of Study Conventional9. Mode of operation Self-govern10. Study Scheme Part Time11. Study Duration Maximum: 10 years
Type of Semester No. of Semesters No. of Weeks/Semester
Regular 2 14
Short 1 8
12. Entry Requirements Diploma or equivalent13. Programme Objectives (PEO)To produce graduates who are able to :
i) Demonstrate their academic and technological excellence professionally and globally, particularly in areas related to mechanical engineering practices and contribute innovatively to the nation’s wealth creation.
ii) Advance their careers by assuming increasing levels of responsibility, leadership and acquiring professional and advanced academic qualifications.
iii) Recognize and practice professional, ethical, environmental and societal responsibilities and value different global and cultural aspects of their work and society.
iv) Adapt and communicate effectively and be successful working with multi-disciplinary teams.
12
14. Programme Outcomes (PO)PO1 Ability to acquire and apply fundamental knowledge to mathematics,
science and engineering principles to solve complex mechanical engineering problems.Keywords: Engineering Knowledge
PO2 Ability to identify, formulate and analyse complex mechanical engineering problems.Keywords: Problem Analysis
PO3 Ability to design solutions for complex mechanical engineering problems that fulfil health, safety, societal and environmental needs by using conventional or modern tools.Keywords: Design Solutions Using Conventional/Modern Tools
PO4 Ability to investigate complex mechanical engineering problems using research-based knowledge and methods to produce conclusive results.Keywords: Investigation
PO5 Ability to practice professional ethics related to societal, health, safety and legal issues with full responsibility and integrity.Keywords: Professional Ethics and Society
PO6 Ability to identify the impact of mechanical engineering solutions on sustainability and demonstrate the needs for sustainable development. Keywords: Sustainability
PO7 Ability to communicate effectively on complex mechanical engineering activities both orally and in writing.Keywords: Communication
PO8 Ability to work productively as an individual, and as a member or leader in a team that may involve multi-disciplinary settings.Keywords: Team Working
PO9 Ability to undertake life long learning and manage information including conducting literature study.Keywords: Life Long Learning
PO10 Ability to demonstrate and apply knowledge on finance and management principles and acquire entrepreneurship skill.Keywords: Management, Finance & Entrepreneurship
13
15. Classification of CoursesNo. Classification Credit Hours Percentage
i Programme Core 79 57
ii. Programme Electives 38 28iii. Compulsory University Subject 20 15
Total 137 100
Classification of courses for engineering programme
A Engineering Courses 117 85
Total credit hours for Part A 117
B Non-Engineering 2015
Total credit hours for Part B 20
Total credit hours for Part A and B 137 100
16. Total Credit Hours to Graduate 137
14
Areas Of Study
Mechanical engineering program makes up the core of the engineering studies at the Faculty of Mechanical Engineering. Students pursuing specialization in a particular field shall take additional elective courses. The fundamental areas of study in mechanical engineering are described as follows:
(a) Applied Mechanics
Applied Mechanics is the application of mechanics principles to real world problems. It is a field of engineering that combines the fundamental physical sciences with powerful mathematical, computational and experimental techniques. The term mechanics refers to the formulation of rules predicting the behavior of physical system under the influence of any type of interaction with its environments, particularly due to the action of forces that cause the behavior or response of the physical system at rest (statics) or in motion (dynamics). Applied Mechanics covers the following disciplines: Mechanics of Materials and Structures Mechanics of Machines Dynamic Systems and Control.
The above sub-fields provide the essential knowledge that is required by the Mechanical-based engineers to include Aeronautical, Automotive, Marine, Materials, Manufacturing and Industrial Engineering counterparts.
Examples of the elective courses in Applied Mechanics are: Mechanics of Composite Materials, Failure of Engineering Components and Structures, Mechanical Vibration, Machine Condition Monitoring, Noise, and Robotics.
15
(b) Thermodynamics
Thermodynamics is taught at two levels; basic and applied. In the basic level, focus is given to the understanding of the concept system, heat, work as well as material properties in relation to heat and work, and their influence on a particular thermodynamic system. The second level involves application of theories based on thermodynamic laws in studying and analyzing primary devices. Focus is on the methods of generating heat and power, minimization of fuel usage, efficiency and other parameters.
Thermodynamics is an important field, very much needed in several industrial sectors such as power generation, petro chemistry, automotive and building maintenance. It is a course which is directly involved in power generation/ energy savings, different engine designs and the supporting systems with high capability and cost effectiveness.
Examples of the elective courses in Thermodynamics are: Combustion Processes, Air-Conditioning, Internal Combustion Engine, Heat Transfer, and Power Plant Technology.
(c) Fluid Mechanics
It is a field of study that deals with fluid properties, surface hydrostatic force (examples: dam gate, reservoir, pressure and flow measurement, piping system design, potential flow and boundary layer) to determine flow type and resulting force, pumps and turbines. The principles applied include Newton’s law, thermodynamic laws and basic knowledge in Mathematics. The scope of study is based on its application in the engineering field. Examples of the elective courses in Fluid Mechanics are: Turbo-Machinery, Hydraulic and Pneumatic Systems, and Computational Fluid Dynamics (CFD).
16
(d) Design
Introduction to Design Students are exposed to the concepts and methods to develop an efficient design process and applying it to solve engineering design problems creatively and effectively.
Component Design Students are exposed to analysis in machine design element failure theories. This includes failures due to static and fatigue loads. It involves fatigue strength and endurance level, modified stress, Goodman diagram and fatigue design under tensile and combined stresses. The content will encompass the design and selection of bolts, welding, spring, ball and roller bearings, gears and belts. At the end of the course, students should have the capabilities to identify, make analysis and design the machine elements in the perspective of static and fatigue failure aspect.
System Design Students are exposed to design methodologies and principles specific to the practice of mechanical design. Emphasis is on developing efficient and effective design techniques as well as project-oriented skills from both technical and nontechnical considerations. Students are able to identify and apply appropriate methodology in performing design tasks, recognize the fundamental principles of mechanical design and practices and formulate and apply general problem solving strategy in the analysis of situation, problem and potential problem. Students are able to identify and apply industry standards in design communication.
17
(e) Materials Science and Materials Technology
This course is important to the engineer because it provides the basic knowledge in engineering materials such as metals, polymers, ceramics and composites so that proper materials can be elected for a particular design or product. This course relates the structure to the properties of materials so that the behavior of materials can be better understood.
18
Career Prospects
Graduates of the program are expected to work in Mechanical Engineering field, one of the oldest and broadest areas of engineering activity. The career of a Mechanical Engineer involves the efficient application of physical and human resources in improving the standard of living. A Mechanical Engineer combines the basic knowledge of physical sciences and engineering education with experience and expertise to invent, design and manufacture, run and maintain mechanical equipment, machineries and tools in all branches of industry including automotive, aerospace, marine/ ship building, manufacturing, processing and those involving heavy machineries. Graduates in this area are capable of fulfilling the task of an engineer cum technologist in the government, semi-government and private firms. Graduate will be able to find job opportunities in various sectors and industries as previously mentioned.
A Mechanical Engineer may further his career as a product designer (consulting firm), building contractor, manufacturer of machines or engineering products, researcher in Research and Development (R&D) departments/ institutes or an academician in institutions of higher learning. Indeed, the career of a Mechanical Engineering graduates are able to take up various relevant positions without much hassle.
19
Bachelor Of Engineering (Mechanical) Programme
Curriculum & Pre-requisite Courses
No. Code Course Credit Pre-requisite/s
1 SKEU 1002 Electrical Technology 2 Automatic Exemption
2 SKEU 2012 Electronics** 2 SKEU 1002
3 SKMM 1013 Programming for Engineers 3
4 SKMM 1113 Mechanics of Solid I* 3 SKMM 1203
5 SKMM 1203 Statics* 3
6 SKMM 1213 Dynamics* 3 SKMM 1203
7 SKMM 1503 Engineering Drawing 3 Automatic Exemption
8 SKMM 1512 Introduction to Design** 2 SKMM 1503
9 SKMM 1912 Experimental Method 2 Automatic Exemption
10 SKMM 1922 Introduction to Mechanical Engineering
2 Automatic Exemption
11 SKMM 2123 Mechanics of Solid II* 3 SKMM 1113
12 SKMM 2223 Mechanics of Machine & Vibration*
3 SKMM 1203
13 SKMM 2313 Mechanics of Fluid I* 3 SKMM 1203
14 SKMM 2323 Mechanics of Fluid II* 3 SKMM 2313
15 SKMM 2413 Thermodynamics* 3
16 SKMM 2423 Applied Thermodynamics* 3 SKMM 2413
17 SKMM 2613 Materials Science 3
18 SKMM 2921 Laboratory I 1 Automatic Exemption
19 SKMM 3023 Applied Numerical Methods***
3 SKMM 1013, SSCE 1793
20 SKMM 3033 Finite Element Method*** 3 SKMM 2123
21 SKMM 3233 Control Engineering*** 3 SKMM 1213, SSCE 1793
22 SKMM 3242 Instrumentation*** 2 SKEU 2012
23 SKMM 3252 Mechatronics*** 2 SKEU 2012, SKMM 1013
24 SKMM 3443 Heat Transfer*** 3 SKMM 2413, SSCE 1793
25 SKMM 3523 Components Design*** 3 SKMM 1512, SKMM 2123
26 SKMM 2713 Manufacturing Process 3
20
No. Code Course Credit Pre-requisite/s
27 SKMM 3813 Industrial Engineering 3
28 SKMM 3915 Industrial Training*** 5 SKMM 2123, SKMM 2223,SKMM 2323, SKMM 2423
29 SKMM 3931 Laboratory II** 1 SKMM 2921
30 SKMM 3941 Laboratory III** 1 SKMM 3931
31 SKMM 4533 System Design** 3 SKMM 3523
32 SKMM 4823 Engineering Management, Safety & Economics
3
33 SKMM 4902 Engineering Professional Practice
2
34 SKMM 4912 Undergraduate Project I***
2 SKMM 2123, SKMM 2223,SKMM 2323, SKMM 2423
35 SKMM 4924 Undergraduate Project II**
4 SKMM 4912
36 SSCE 1693 Engineering Mathematics I
3 Automatic Exemption
37 SSCE 1793 Engineering Mathematics II**
3 SSCE 1693
38 SSCE 1993 Engineering Mathematics III**
3 SSCE 1793
39 SSCE 2193 Engineering Statistics
3
Mechanical Electives
No. Code Course Credit Pre-requisite/s
40 SKMM 4ww3 Elective I 3
41 SKMM 4xx3 Elective II 3
42 SKMM 4yy3 Elective III 3
43 SKMM 4zz3 Elective IV 3
21
University Courses
No. Code Course Credit Pre-requisite/s
44 UHAS 1172 Malaysian Dynamics 2
45 UICI 1012 Islamic & Asian Civilization 2
46 UICI 2022 Science, Technology & Mandkind
2
47 Uxxx xxx2 Humanities Development & Globalization Cluster Electives
2
48 Uxxx xxx2 Entrepreneurship Cluster Electives
2
49 Uxxx xxx2 Innovation & Creativity Cluster Electives
2
50 ULAB 1112 English for Academic Communication
2
51 ULAB 2112 Advance English for Academic Communication**
2 ULAB 1112
52 ULAB 3xx2 English Electives** 2 ULAB 2112
53 UKQx 1xx1 Co-curriculum Electives 1 Automatic Exemption
54 UKQx 1xx1 Co-curriculum Electives 1 Automatic Exemption
TOTAL CREDITS 137
Notes:
* Core courses (passing grade is C, pointer 2.0)
** Minimum grade for pre-requisite courses is D+ (pointer 1.0)
*** Minimum grade for pre-requisite courses is D- (with pointer)
22
Co
ur
se F
low
ch
art
Bac
hel
or
Of
Eng
inee
rin
g (
Mec
han
ical
) P
ro
gr
am
me
UTM
SPA
CE
Inta
ke
2013
/201
4 Se
mes
ter
II
SKEU 2012
SSCE 1693
UHAS 1172
SKMM 1013
SKMM 1203
SKMM 1503
SKMM 1922
UKQx1xx1
ULAB 1112
SKMM 1213
SKMM 1113
SKMM 1512
SKMM 1912
UICI 1012
SKMM 2413
SKMM 2423
SSCE 1993
SKMM 2323
SSCE 2193
SKMM 2613
SKMM 3252
SKMM 3023
SKMM 3233
SKMM 3931
SKMM 2713
Uxxx xxx2
ULAB 3xx2
UICI 2022
SKMM 3813
SKMM 3941
SKMM 3523
SKMM 3033
SKMM 3443
SKMM 3242
SKMM 3915SKMM 4912
SKMM 4xx3
SKMM 4xx3
SKMM 4533
SKMM 4823
UKQx 1xx1
SKMM 4924
SKMM 4xx3
SKMM 4xx3
SKMM 4902
Uxxx xxx2
Uxxx xxx2
SSCE 1793
SKMM 2313
SKMM 2123
SKMM 2223
ULAB 2112
SKMM 2921
Total Credits137
Automatic Credit Exemption
Core Courses
SKEU 1002
23
@arm
SKEU 2012
SSCE 1693
UHAS 1172
SKMM 1013
SKMM 1203
SKMM 1503
SKMM 1922
UKQx1xx1
ULAB 1112
SKMM 1213
SKMM 1113
SKMM 1512
SKMM 1912
UICI 1012
SKMM 2413
SKMM 2423
SSCE 1993
SKMM 2323
SSCE 2193
SKMM 2613
SKMM 3252
SKMM 3023
SKMM 3233
SKMM 3931
SKMM 2713
Uxxx xxx2
ULAB 3xx2
UICI 2022
SKMM 3813
SKMM 3941
SKMM 3523
SKMM 3033
SKMM 3443
SKMM 3242
SKMM 3915SKMM 4912
SKMM 4xx3
SKMM 4xx3
SKMM 4533
SKMM 4823
UKQx 1xx1
SKMM 4924
SKMM 4xx3
SKMM 4xx3
SKMM 4902
Uxxx xxx2
Uxxx xxx2
SSCE 1793
SKMM 2313
SKMM 2123
SKMM 2223
ULAB 2112
SKMM 2921
Total Credits137
Automatic Credit Exemption
Core Courses
SKEU 1002
24
Other Courses (No pre-requisites)
SKMM 1013 SKMM 3813
SKMM 1203 SKMM 4823
SKMM 2413 SKMM 4902
SKMM 2613 SKMM 4xx3
Semester I & II
SKMM 2713 SSCE 2193
UHAS 1172
Semester III
UICI 1012
UKQX 1xx1
Numerical Courses
SKMM 1013
SSCE 1793 SKMM 3023
Instrumentation Courses
SKEU 2012 SKMM 3242SKEU 1002
FEM Courses
SKMM 2123 SKMM 3033SKMM 1113SKMM 1203
Mechatronic Courses
SKEU 2012
SKMM 1013SKMM 3252
SKEU 1002
Laboratory Courses
SKMM 3931 SKMM 3941SKMM 2921SKMM 1912
Design Courses
SKMM 4533SKMM 2123
SKMM 3523SKMM 1512SKMM 1503
English Courses
ULAB 3xx2ULAB 2112ULAB 1112
Heat Transfer Courses
SKMM 2413
SSCE 1793SKMM 3443
SSCE 1693
Mathematical Courses
SSCE 1993SSCE 1793SSCE 1693
Control Courses
SSCE 1793SKMM 3233
SSCE 1693
SKMM 1213SKMM 1203
UICI 2022
ULAB 1112
Uxxx xxx2
Undergraduate Project Courses and Industrial Training Course
SKMM 1113 SKMM 2123SKMM 3915
SKMM 1213 SKMM 2223
SKMM 2313 SKMM 2323
SKMM 2413 SKMM 2423SKMM 4912 SKMM 4924
SKMM 1203
Pre-requisite Course Flowchart Bachelor Of Engineering (Mechanical)
Programme UTMSPACE Intake 2013/2014 Semester II
25
Other Courses (No pre-requisites)
SKMM 1013 SKMM 3813
SKMM 1203 SKMM 4823
SKMM 2413 SKMM 4902
SKMM 2613 SKMM 4xx3
Semester I & II
SKMM 2713 SSCE 2193
UHAS 1172
Semester III
UICI 1012
UKQX 1xx1
Numerical Courses
SKMM 1013
SSCE 1793 SKMM 3023
Instrumentation Courses
SKEU 2012 SKMM 3242SKEU 1002
FEM Courses
SKMM 2123 SKMM 3033SKMM 1113SKMM 1203
Mechatronic Courses
SKEU 2012
SKMM 1013SKMM 3252
SKEU 1002
Laboratory Courses
SKMM 3931 SKMM 3941SKMM 2921SKMM 1912
Design Courses
SKMM 4533SKMM 2123
SKMM 3523SKMM 1512SKMM 1503
English Courses
ULAB 3xx2ULAB 2112ULAB 1112
Heat Transfer Courses
SKMM 2413
SSCE 1793SKMM 3443
SSCE 1693
Mathematical Courses
SSCE 1993SSCE 1793SSCE 1693
Control Courses
SSCE 1793SKMM 3233
SSCE 1693
SKMM 1213SKMM 1203
UICI 2022
ULAB 1112
Uxxx xxx2
Undergraduate Project Courses and Industrial Training Course
SKMM 1113 SKMM 2123SKMM 3915
SKMM 1213 SKMM 2223
SKMM 2313 SKMM 2323
SKMM 2413 SKMM 2423SKMM 4912 SKMM 4924
SKMM 1203
General Guidelines for Course Registration
• Ensure the course that you want to register has fullfilled the pre-requisite requirements (if applicable). Do not register the course without passing the pre-requisite courses as the final results will be cancelled.
• When comparing courses to register, priotize the pre-requisite courses.
• It is advisable to take only two core courses with one accompanying course per semester.
@arm
26
Academic Regulations & Guidelines
Programme & Course Registration
All students are required to register their courses on the dates specified by the university.
Course registration for senior students MUST be done ONLINE. Please check the correct code and the required pre-requisites (where applicable) for the course.
The maximum number of credits to be registered by a Part-Time student is 10 for the normal semester and 6 for the short semester. Students who wish to take more will have to get the Dean’s permission.
With the knowledge of the Course Lecturer and with the agreement of the Academic Advisor, a student can apply to withdraw from any course which has been registered for the semester not later than the specified date set by the university.
Course Codes & Abbreviations
The course code offered by the faculty is made up of three letters and four numbers. For example:
Course credit = 3
Course sequence = 1st
Field of course = Applied Mechanics
Year of program = 1st
Area of specialization = Mechanical
Faculty offering the programme = Mechanical
Type of award = Bachelor
27
Credit System
Every course is accorded a credit value except those specified by the university.
Credit Value
The credit value is based on the number of meeting hours per semester.
Lectures and Practical Period1 credit = 14 lecture hours per semester1 credit = 28 – 42 meeting hours per semester for practical/ studio
Example: Determination of credits for lectures and equivalent for practical period• 42 lecture hours per semester, or• 28 lecture hours per semester + 28 - 42 hours of practical/studio
work per semester, or• 14 lecture hours per semester + 56 - 84 hours of practical/studio
work per semester, or• 84 - 126 hours of practical/studio work per semester
Credits Obtained
Credits Obtained is the total number of credits for courses for which a student has passed. Credits Obtained is computed for each semester and all semesters. For students with credit exemption, the credits will be added to the passed course credits in order to determine the overall Credits Obtained. The Credit Obtained is very closely related to the Credits for Course Graduation.
Credits Counted
Credit Counted is the total number of credits taken by a student in a semester and in all semesters. The number of credits is used in the computation of GPA and CPA for the student concerned.
28
Credits For Programme Year
The stage of study or the year of the program for a student is determined by the total number of Credits Obtained. A student is deemed to have progressed a particular year program if the Credits Obtained is not less than value in the following table;
To Progress to Year Minimum Total Credits ObtainedSecond 27Third 60
Fourth 93
29
Specific Requirements For Courses In The Faculty
Pre-requisites Courses
Passing grade for all courses is 40% (D+) except for core courses; the passing grade is 50% (C). A student must fulfil the pre-requisite course before taking the next course.
Core Courses for SMM Programme
SKMM 1113 Mechanics of Solid ISKMM 1203 StaticsSKMM 1213 DynamicsSKMM 2123 Mechanics of Solid IISKMM 2223 Mechanics of Machines & VibrationSKMM 2313 Mechanics of Fluid ISKMM 2323 Mechanics of Fluid IISKMM 2413 ThermodynamicsSKMM 2423 Applied Thermodynamics
Industrial Training
Students have to register and complete a 12 weeks industrial training. The 5 credit registration will be counted in the 10 credit/semester maximum. A lecturer will be appointed to act as supervisor. Students have to submit the log book, the Training Report, and the Organization Evaluation Form to the Faculty.
30
Undergraduate Project (UGP)
The undergraduate project is divided into 2 parts, namely Undergraduate Project 1 (SKMM 4912) and Undergraduate Project 2 (SKMM 4924). Refer to UGP FME UTM Guidelines for more details.
Implementation of UGP• Student must have fulfilled all pre-requisite requirements.• Student must have accumulated at least 98 credits.• Student proposes the subject area which will be evaluated by the
relevant Head of Panel.• A lecturer will be assigned as supervisor of the project.• Meetings with supervisors minimum of 3 times/ semester.• Seminar presentation at the end of the semester at FKM UTM Johor
Bahru.• Students are required to submit the bounded thesis in order to
graduate.
Credit Exemption
Part I: Faculty CoursesExemption of a particular course is subject to the requirements set by the faculty. A student may get credit exemption limited to a maximum of 30% (41 credits) of the total number of credits for graduation. Part II: University CoursesExemptions are processed by and under the jurisdiction of the relevant faculty/ department.
Part III: Industrial TrainingStudents who have at least 2 years working experience in an engineering environment after the Diploma are eligible to apply for exemption for Industrial Training. Application can only be forwarded (by filling in the relevant forms and submitting an Industrial Experience Report) to the Industrial Training Coordinator after passing all pre-requisite courses.
31
Course Implementation
Semester I & Semester IICourses are conducted on SATURDAY and SUNDAY at all Learning Centers except for Johor Bahru. Implementation is based on the same Credit Value according to Full Time Program. Typical distribution of four courses (A, B, C, and D) with 3 credit hours each is illustrated as follows:
Saturday SundayWeek 14:00-18:00 20:00-22:00 08:30-11:30 12:00-18:00
1 A B A B2 C D C D3 A B A B4 C D C D5 A B A B. . . . .. . . . .
1516 Study Week1718 Final Examination (3 weeks)19
32
At learning center in Johor Bahru, courses are conducted on FRIDAY and SATURDAY. Typical distribution of four courses (A, B, C, and D) with 3 credit hours each is illustrated as follows:
Friday SaturdayWeek 18:00-23:00 11:00-15:00 15:00-23:00
1 A A B2 C C D3 A A B4 C C D5 A A B. . .. . .
1516 Study Week1718 Final Examination (3 weeks)19
Semester IIIThis semester is dedicated for the University Courses and laboratory courses. All laboratory courses are carried out at UTM Johor Bahru campus before the start of the Semester III. Credits for the registration of Laboratory Courses are included in the 6 credits maximum allowable for each Short Semester.
33
Lecture Attendance
Students who do not attend lectures or whose attendance is less than 70% without acceptable reasons will not be allowed to sit for the final examination, and a zero mark (grade E) will be given to the course.
Grading System
A student’s performance in a course is indicated by the grade obtained. The relationship between marks, grades and grade points are as shown below. Generally the passing grade for any course is D+ except for core courses which are C. However, the passing grade for a particular course is subject to the Faculty’s requirement with the approval of the University Senate.
Mark Grade Grade Point90 – 100 A+ 4.0080 – 89 A 4.0075 – 79 A- 3.6770 – 74 B+ 3.3365 – 69 B 3.0060 – 64 B- 2.6755 – 59 C+ 2.3350 – 54 C 2.0045 – 49 C- 1.6740 – 44 D+ 1.3335 – 39 D 1.0030 – 34 D- 0.6700 - 29 E 0.00
Apart of the above grades, the following course grades are also used:
34
TD (Withdraw)
This grade is given to courses withdrawn during a specified duration as stipulated by the Senate. Credits will not be taken into account when computing Credit Counted, Credits Obtained, GPA and CPA.
UM (Repeat Course)
For a course with a UM status grade HL will be awarded if the course is of a HW status. For core courses students are required to pass with at least a C grade. However, the credits for a failed UM course will not be counted in the CPA computation since they have been taken into consideration during the previous semester. This is to avoid duplication. A student who fails an elective course as a substitute but the credits and grade of the original course will be taken into account in Credits Counted and the CPA.
UG(Repeat Grade)
A student may improve any course with a B- grade or lower using the UG status. For a particular course this permission is given once only. The better grade between the previous and current grade will be awarded and used in the computation of GPA and CPA.
HL(Passed
Attendance)
Pass Grade given for the course that is registered as HW status.
HG(Failed
Attendance)
Fail Grade given for the course that is registered as HW status.
TS (Incomplete)
Grade given to students who are unable to sit for the final examination or to complete the coursework for a particular course due to illness as certified by a Medical Officer of the University or of a government hospital or due to other reasons acceptable by the Senate. Students must submit the medical certificate to the faculty not later than 24 hours before the commencement of the examination of the said course. The grade is also given to students who are unable to submit their undergraduate project theses within the stipulated time allocated by the faculty. Credits will not be taken into account when computing Credit Counted, Credits Obtained, GPA and CPA.
35
Examinations
The end of semester examinations are the final examinations for courses taught through lectures. The allocation of marks for this should not exceed 50% of the overall evaluation mark for the course. Grades for each course will be displayed by the course lecturer and students may submit an appeal for re-evaluation of the examination grade for any course to the faculty within a specified duration and following a specified procedure. Appeals will not be entertained after the expiry date. Students will be charged with a specific amount for each of the courses appealed. Implementations of the final examinations procedure are also applicable to Part-Time students. The question papers, duration, time and dates are identical to Full-Time students but the location is at the relevant Learning Centers. UTMSPACE will provide qualified staff to invigilate and administer the examinations at the Learning Centers. Special examination may be held for any student who is unable to sit for the end of semester examination due to illness as certified by the University Medical Officer or by a government hospital.
Special examination may not be held in the following cases:• Courses which do not have final examinations.• Students who do not sit for the final examination without a valid
reason acceptable to the University/ or being barred from sitting for the final examination, or any other reasons approved by the University Senate.
Academic Performance
The student’s performance is evaluated based on GPA and CPA.
GPA – Grade Point AverageGPA is the grade point average obtained by a student in a particular semester. GPA is computed as follows:
Grade Point Average (GPA) = (Total Point Value for the semester)/ (Total Credits Counted for the semester)
36
CPA – Cumulative Grade Point AverageCPA is the cumulative grade point average obtained by a student for all semesters studied. CPA is computed as follows:
Cumulative Grade Point Average (CPA) = (Total Point Value for all semesters)/ (Total Credits Counted for all semesters)
Example of GPA & CPA calculations
Semester I
Courses GradePoint Value
CreditTotal Point Value
Credits Counted
Credits Obtained
SSCE 1893 B+ 3.33 3 9.99 3 3
SKMM 2512 B 3.00 2 6.00 2 2SKMM 2713 A- 3.67 3 11.01 3 3
Total 8 27.00 8 8
For Semester I, GPA = 27.00/8 = 3.38For Semester I, CPA = 27.00/8 = 3.38
Semester II
Courses GradePoint Value
CreditTotal Point Value
Credits Counted
Credits Obtained
SKMM 1313 A 4.00 3 12.00 3 3SKMM 3813 B+ 3.33 3 9.99 3 3SKEU 2012 A- 3.67 2 7.34 2 2
Total 8 29.33 8 8
For Semester II, GPA = 29.33/8 = 3.67
For Semester II, CPA = (27.00+29.33)/(8+8) = 56.33/16 = 3.52
37
Academic Performance Rating
The academic rating of a student is determined at the end of a regular semester using CPA as the following:
Academic Performance Rating CPAKB – Satisfactory CPA ≥ 2.00
TM – Unsatisfactory CPA < 2.00
Procedure of Awarding Degree
Degrees are awarded during the two regular semesters. However, under special circumstances, the Senate may allow the awarding of degrees during the short semester. Students are required to submit an application for graduation (award of degree) in a particular semester within a specified duration. A penalty will be imposed on late application of degree award. Students who do not submit their application for the award of a degree during the specified duration will be given a Satisfactory Rating (Program Completed) or KB (TK).
Students, who do not submit their application for the award of degree within five years of completion of their program, will not be awarded with a degree. Students who are not eligible for degrees but submit an application will be asked to pay a penalty.
A student must pass all courses specified for his/ her program of study. The total minimum credits and the maximum duration to complete and pass the program are as follow:
Degree Award Minimum Credits Maximum SemesterDegree of Engineering
(Mechanical) 137 20
38
A student is eligible to be awarded a degree after fulfilling the following conditions:• Obtained Satisfactory Rating or KB (with a minimum CPA of 2.00)• Has passed all courses specified.• Has applied for graduation and has been certified by the faculty.• Other conditions as specified.
Classification of Degree
The classification of degree awarded to a student is based on the final CPA obtained as follows:
Bachelor Degree CPAFirst Class Honours CPA ≥ 3.67Second Class Honours (Upper) 3.00 ≤ CPA < 3.67Second Class Honours (Lower) 2.00 ≤ CPA < 3.00
39
Appendix
- Academic Calendar for 2013/2014 Session - - Kecemerlangan Pelajar UTMSPACE -
- Senarai Graduan Pelajar UTMSPACE (SMM) - - UTMSPACE Website & Student Portal -
40
ACADEMIC CALENDAR FOR 2013/2014 SESSION
SEMESTER I (19 weeks : 14 September 2013 - 19 January 2014)
15 July - 5 Aug 2013 Registration of Courses for Semester I 2013/2014 Session
14 Sept - 22 Dec 2013 Semester I Lectures
10 Nov 2013 (until the 9th lecture weeks)
Duration for second payment
26 - 29 Oct 2013 *51th Convocation Ceremony of UTM
23 - 29 Dec 2013 Revision Week
30 Dec - 19 Jan 2014 Final Examination for Semester I
20 Jan - 9 Feb 2014 Break for Semester I (4 weeks)
3 - 4 Feb 2014 *Meeting of Senate Standing committee on Examinations/Results for Semester I 2013/2014
10 - 21 Feb 2014 *Special Examination for Semester I
SEMESTER II (19 weeks : 15 February – 22 June 2014) 23 Dec 2013 - 12 Jan 2014 *Registration of Courses for Semester II 2013/2014
Session
15 Feb - 25 Mei 2014 Semester II Lectures
28 Mac 2014 *Meeting of Senate Standing committee on Special Examinations/Results for Semester I 2013/2014
13 April 2014 (until the 9th lecture weeks)
Duration for second payment
24 - 26 Mei 2014 *52th Convocation Ceremony of UTM
26 Mei - 1 June 2014 Revision Week
2 - 22 June 2014 Final Examination for Semester II
23 June - 31 Aug 2014 Break for Semester II (10 weeks)
22 - 23 July 2014 *Meeting of Senate Standing committee on Examinations/Results for Semester II 2013/2014
4 - 15 Aug 2014 *Special Examination for Semester II
22 Aug 2014 *Meeting of Senate Standing committee on Special Examinations/Results for Semester II 2013/2014
41
SHORT SEMESTER (9 weeks : 23 June – 29 Aug 2014) 28 April - 25 Mei 2014 *Registration of Courses for Short Semester 2013/2014
Session
23 – 28 June 2014 Lab week
6 July - 24 Aug 2014 Short Semester Lectures
14 July - 1 Aug 2014 *Registration of Courses for Semester I 2014/2015 Session
26 - 29 Aug 2014 Final Examination for Short Semester (4 days)
11 Sept 2014 *Meeting of Senate Standing committee on Examinations/Results for Short Semester 2013/2014
19 - 20 Sept 2014 *Special Examination for Short Semester 2013/2014
9 Oct 2014 *Meeting of Senate Standing committee on Special Examinations/Results for Short Semester 2013/2014
PUBLIC HOLIDAYS
16 Sept 2013 Malaysia Day
15 Oct 2013 Eid Al-Adha
2 Nov 2013 Deepavali
5 Nov 2013 Awal Muharram
22 Nov 2013 Birthday of DYMM Sultan Johor (Public Holiday for Johor only)
9 Dec 2013 Hol Day of Almarhum Sultan of Johor
25 Dec 2013 Christmas
14 Jan 2014 Birthday of Phophet Muhammad S.A.W. (Public Holiday for Johor only)
31 Jan – 1 Feb 2014 Chinese New Year
1 May 2014 Labour Day
17 May 2014 Wesak Day
7 June 2014 Birthday of DYMM Seti Paduka Baginda Yang diPertuan Agong
29 Jun 2014 Awal Ramadhan (Public Holiday for Johor only)
28 - 29 July 2014 Eid Al-Fitri
31 Aug 2014 National Day
*Subject to changes
42
Kecemerlangan Pelajar UTMSPACE
Majlis Penyampaian Anugerah Dekan UTMSPACE.
Penerima Anugerah Dekan; Hilmi bin Nandan.
43
Penerima Anugerah Dekan; Tan Beng Chiat. Kini menyambung pengajian di peringkat PhD di UTM.
Penerima Anugerah Dekan; Azmarini binti Ahmad Nazri. Kini menyambung pengajian di peringkat PhD di UTM.
44
Senarai Graduan Pelajar UTMSPACE (SMM)
SESI 2013/2014, SEMESTER I
Pusat No. K/P No. Matriks Nama
Johor Bahru
76050714563 SX051142MMJ01 Mohamad Faisal Bin Zainal Abdin
86062523590 SX081468MMJ01 Noor Aniza Bte Ghzali@Ghazali
84031602531 SX091229MMJ01 Mohd Nadhir Bin Saad @ Robean
Pulau Pinang
86083035546 SX081008MMJ03 Mohamed Yassir Bin Muzammil
83051504502 SX081024MMJ03 Vargesh A/L Ratnam77090307594 SX085860MMD0 Azdikirana Bin Abdul Aziz
Kuala Lumpur
G14821 SX050650MMJ04 Mahadhir Bin Muhamad63041010684 SX050634MMJ04 Amrun Bin Misnoh
82120110505 SX055462MMD0 Muhammad Fadhlan Bin Marzukhi
83090414558 SX060652MMJ04 Aina Binti Kamal
79101008564 SX065402MMD0 Abdul Mazid Bin Hussin Mahfuz81070104505 SX070743MMJ04 Anuar Bin Mohamad Ali
79062501540 SX070757MMJ04 Mohamad Najib Bin Abu Bakar
78092501596 SX070776MMJ04 Mohd Khir Bin Laton81012708617 SX075251MMD0 Mohd Saiful Bin Mohd Judi81090502606 SX075237MMD0 Md Rafi Bin Sulaiman80061810552 SX075245MMD0 Mohd Fazriq Bin Md. Yunus
Kuala Lumpur
82121714616 SX076104MMD0 Mohd Azmi Bin Wagiran86061338548 SX075412MMD0 Cheang Kar How85020604532 SX081049MMJ04 Mohamad Ariff Bin Giman82053002537 SX085940MMD0 Muhd Jasni Bin Ilias
Ipoh 81061501541 SX070828MMJ05 Zulkeflee Bin Zakaria
45
UTMSPACE WEBSITE (http://www4.utmspace.utm.my/)
1. First, click “Student Portal”
2. Next, click “Student’s Website”
46
Or, go directly to the link:
STUDENT PORTAL (http://www.spaceutm.edu.my/portal/)
Or, scan the QR code below using your smartphone:
47
The content of this handbook is true and correct at the time of publication. Further information can be obtained from
Undergraduate Handbook 2013/2014 in www.fkm.utm.my.
The Faculty of Mechanical Engineering, Universiti Teknologi Malaysia reserves the right to change any information contained herewith.
Please forward any queries to:
THE DEANFaculty of Mechanical Engineering
Universiti Teknologi Malaysia81310 Johor Bahru
Johor Darul TakzimEmail: [email protected]
Telephone: 07-5534567Fax: 07-5566159
or
ACADEMIC MANAGERThe Office of External ProgrammesFaculty of Mechanical Engineering
Universiti Teknologi Malaysia81310 Johor Bahru
Johor Darul TakzimEmail : [email protected]
Telephone : 07-5534681Fax : 07-5577782
2013/2014-sem2-zaba-Jan2014