VM-45

OUR PAVER FINISHER MACHINES ARE TESTED AND APPROVED BY ARAI

(Automotive Research Association of India)

Transmission Mechanical Wheels on rear axle Two wheels

Engine Power 76 hp @ 2200 rpm Conveyor Drive Hydraulic

Laying Capacity 125 TPH Option: Mechanical

Hopper Capacity 4.25 m3 Operator Seat Double

Paving Width 2.5 m to 4.5 m Material Suitability

Weight 9,400 kg Option 1: Bituminous material

Option 2: Bituminous, Wet mix, GSB, DLC, DBM material

with hydraulic drive for conveyor

‘M’ series

INDIAN MACHINES. DELIVERING BEYOND EXPECTATIONS.

PERFORMANCE

Laying suitability Option 1: Bituminous material Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose)

Laying Capacity 125 TPH Laying Thickness 200 mm (Max) to 10 mm (Min)

8” (Max) to 3/8” (Min) Transmission Mechanical Working Speed 1.27 to 24 m/min (Max.)

Travelling Speed 16 km/hr (Max) Weight 9,400 kg (20,780 lb) approx. Slope & Grade Control

Manual mode

Maintenance Shutters On two side of machine Conveyor & Pump Motor

Sauer Danfoss, Germany or equivalent

DIMENSIONS

Operating Height 3.56 m (11’ 81/8”) Shipping Height (canopy tilted) (w/o canopy & exhaust)

2.70 m (8’ 105/16”) 2.62 m (8’ 7¼”)

Shipping Width 2.69 m (8’ 10”) Length (Tractor unit + screed) 5.53 m (18’ 1¾”) Wheel Base 2.62 m (8’ 7¼”) Dump Height 0.70 m (2’ 3½“) Thrust Roller Height 0.57 m (1’ 10½“)

MACHINERY ACCESSORIES

Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn

POWER UNIT

Engine Kirloskar make water-cooled electric start diesel engine, Model 4R 1040T, 76 hp (57 kW) @ 2200 rpm) or equivalent

Electrical System 12 V DC

Emission Standard BS-III Speed Reduction Gearbox

Eight speed reduction gearbox

UNDER CARRIAGE

Rear Wheel Two no. Pneumatic Tyre Size: 11.00 x 20

Front Wheel Two no. Solid Rubber Tyre 550 Dia. x 175 mm wide

OPERATOR STATION

Control Panel Type Sliding Operator Seat Double Operator Seat Travelling Function Left & Right side Operating Function Left & Right side Steering Hydraulic Brake Caliper disc brake on both the sides

SCREED

Screed width 2.5 m (8’ 2½”) basic width Hydraulically extendable upto 4.5 m (14’ 91/8”)

Crown (Manual) -1° / +4° Screed Heating Yes, with 8 LPG burner facility Screed Vibration Yes (Fix Speed)

CONVEYOR & AUGER SYSTEM

Conveyor & Auger 2 Sets, one on each side Conveyor Drive Hydraulic (Option: Mechanical) Conveyor Control ON / OFF switch function Auger Screw Size Dia 250 mm (10”) Auger Material Ni-Hard / High Chromium Steel Material

HOPPER & FEEDING SYSTEM

Hopper Operation Hydraulic Hopper Capacity 4.25 m3 (151 ft3) Hopper Width Working: 3.22 m (10’ 6 ¾”)

Closed: 2.44 m (8’) Feed Tunnel Width 1.276 m (4’ 2¼” )

REFILL CAPACITIES

Fuel 75 L (16.5 gal) Hydraulic Oil 195 L (43 gal) Cooling System 6.5 L (1.4 gal) Engine Oil 11 L (2.4 gal)

OTHER FEATURES

Single Level control for speed gearing is provided which prevent dual engagement and breaking of gears; All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).

(Note: Specification / description / dimensions are indicative and subject to change without notice due to modification alteration or custom engineering.)

UNITER ENGINEERING PRODUCTS

Office & Works: Plot no. 79, Sub Plot ‘D’, Opp. Aabad Bakery, Nr. Water Tank, Phase- 1,

GIDC Vatva, Ahmedabad 382445. Gujarat State (INDIA)

Tele-Fax: +91-79-25895473/74; Email: sales@uniter.in; Website: www.uniter.in

DESIGN AND SPECIFICATIONS

* Dimension shown in above figure are measured in mm.

Model: VM-45 with hydraulic drive for conveyor

‘M’ series