unit substation - iem substation_0.pdf• comprehensive substation composite layout drawings. •...
TRANSCRIPT
Tradition. Technology. Innovation.
Unit Substation
Conforms to any commercially available transformer
Full Customization and Design Flexibility
Component & Metering Selection Options
Seismic Tested to Worst Case Response Spectrum
Indoor and Outdoor Applications
UL or CSA Listed; Meets ANSI, IEEE, and NEMA Standards
IEM’s Unit Substations can utilize any configuration up to 27kV. They are designed and assembled to accommodate any commercially available transformer for either indoor or outdoor applications.
• Primary – Air terminal chamber, vacuum circuit breaker or load interrupter switch to 27kV
• Transformer – Any commercially available transformer
• Secondary – Circuit breaker or fusible switches, UL 891, UL 1558, or CSA switchgear
• Maximum flexibility with wide range of components and ratings to meet application specifics
• Indoor or Outdoor assemblies/construction
• Configures to any transformer manufacturer available
• Comprehensive substation composite layout drawings.
• Superior flexibility options including increased utilization of space
• Improved voltage regulation and lowered power losses
• Complete coordination of substation components ensures precise fit
• Minimizes the use of secondary distribution cables and busway
UNIT SUBSTATIONProduct Sheet
FEATURES & BENEFITS
Industrial Electric Mfg.™ (IEM)
Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and integrated control systems in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.
www.iemfg.comCorporate Headquarters
Industrial Electric Mfg.™ 48205 Warm Springs Blvd Fremont CA 94539 USA dir: +1.510.656.1600 www.iemfg.com
Vancouver
Industrial Electric Mfg.™ 201 – 27353 58th Crescent Langley, B.C. V4W 3W7 CAN dir: +1.866.302.9836 www.iemfg.com
©2017 The New IEM LLC. Industrial Electric Mfg.™ and IEM Power Systems™ are trademarks of The New IEM LLC. in the U.S. and other countries. All rights reserved.
Jacksonville
IEM Power Systems™ 11902 Central Parkway Jacksonville FL 32224 USA dir: +1.904.365.4444 www.iemps.com
Unit SubstationIEM DIFFERENCE
TECHNICAL SPECIFICATIONS
UNIT SUBSTATIONProduct Sheet
Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.
All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.
Component and metering selections are based on value engineering for the application and optimized to meet specifications.
IEM Switchgear meets seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156.