Slide 1

Unit 2 Fire, Knots, Shelter

Slide 2

Campfire

Slide 3

Environmental Considerations Ample supply of dead wood. Location for a fire. Permitted by law. Naturally replenished within a reasonable time if you have to cut wood. Dont use high impact area. Leave no trace.

Slide 4

Functions of Fires Heat for emergency warmth and drying. Food preparation. Aesthetic/psychological appeal.

Slide 5

Soils Litter; leaves, twigs and other natural organic matter. Duff; Decomposing litter. Mineral soil; made up of sand, gravel, and stones

Slide 6

Safety Considerations Safe location Wind direction Never leave a fire unattended! Safe distance from tents and other equipment. Away from combustible materials (roots, grasses, trees, duff, fuel) Available water Weather conditions (dry)

Slide 7

Fire site types Fire rings Mound or pedestal Fire pan Fire pits

Slide 8

Site Restoration Ensure fire is completely out. Burn the wood to ash. Distribute ashes and rocks. If mound fire was used, replace the mineral soil to its original location

Slide 9

Building a fire.

Slide 10

Combustion Fuel: Wood provides the fuel in campfires. The key is to have the correct size fuel for the amount of heat available. Heat: Heat ignites the fuel and must be balanced with it. Oxygen: there must be room for oxygen. Allow for ample air circulation and arrange the fuel so that oxygen can get to the fire.

Slide 11

Selection of firewood Softwood (eg. Pine, spruce and cedar) are convenient for use as tinder and kindling. They ignite readily and burn hot. Hardwood (eg. Maple, yellow birch, beach) are excellent for obtaining hot long lasting coals, providing a steady temperature for cooking and baking. Maple Yellow birch Pine Spruce Cedar

Slide 12

Materials in Fire construction Tinder; Fine, flammable material which will ignite from the heat of a match. Kindling; Small diameter branches (3/4 or less) or split wood which will ignite from the tinder Fuel; Firewood which provides coals and uniform heat for cooking.

Slide 13

Laying the fire Lean-to Tepee Log cabin/pyramid

Slide 14

Ignition methods. Friction Sun Match Fuel lighter Flint & Steel

Slide 15

Accelerants

Slide 16

Hand drill http://www.youtube.com/watch?v=0WjHZJbebJc Bow drill http://www.youtube.com/watch?v=isUJns93in4 http://www.youtube.com/watch?v=Qk0TeoQPmEY&feature =channel

Slide 17

Knot Tying Figure 8-provides a quick and convenient stopper knot to prevent a line sliding out of sight, e.g., up inside the mast. Its virtue is that, even after it has been jammed tightly against a block, it doesn't bind; it can be undone easily. Half hitch-to hitch or tie a rope to a standing object. Sheet Bend-is recommended for joining two ropes of unequal size. The thicker rope must be used for the simple bight as shown. It works equally well if the ropes are of the same size. Bowline-makes a reasonably secure loop in the end of a piece of rope. It has many uses, e.g., to fasten a mooring line to a ring or a post. Under load, it does not slip or bind. With no load it can be untied easily. Two bowlines can be linked together to join two ropes.

Slide 18

Knot Tying http://www.animatedknots.com/index.php?LogoImage=Log oGrog.jpg&Website=www.animatedknots.com

Slide 19

Shelter

Slide 20

Things to consider before building. Present wind direction Prevailing winds for time of year Opening orientation North South East West Soil type and compaction (driving pegs and poles) Level of ground Low or high area Wet or dry How many people it will sleep

Slide 21

Natural shelters

Slide 22

Slide 23

Tarp tents

Slide 24

Slide 25