Uniform Shape & Size

The volume of bricks is @ 30-35% more than ordinary clay bricks. As a result the number of joints reduces considerably. This saves in cost of mortar.

These bricks are machine made. There is no variation in size of the bricks. The brick wall made is plumb on both the sides. The thickness of plaster can be reduced substantially.

Compound Walls without plaster can be constructed using various bonds. These can be aesthetically very appealing and cost effective too.

Finishes such as Gypsum Plaster and POP can be directly applied to the surface of the wall.

Even Kitchen Dado Tiles can be directly pasted on to the brick surface.

High Strength

High strength of these bricks reduces the wastage in bricks.

These bricks are also suitable for load bearing structures

Low water Absorption

The rain water will not seep into the internal wall surfaces. No dampness is seen.

These bricks do not require soaking in water before use. Nominal sprinkling of water just before use is enough.

Steam Cured

Our manufacturing process involves steam curing method.

As such the shrinkage cracks in walls are reduced.

The bricks are manufactured throughout the year, even during the monsoons.

The manufacturing process is faster. The bricks are ready for despatch within 12 hours of manufacture.

The quality of bricks is consistent and much superior to water cured fly ash bricks

Will the Plaster Stick?Yes and with our guarantee. The minute pores in the bricks are enough for plaster particles to form a good bond with the brick surface.

What about electrical and plumbing conduits?The cutters used for cutting on brick surfaces works as well on these bricks. In fact, when the chisel is used after the cutter, there is absolutely no further widening of the cut surface. The conduiting remains a very clean affair.

Will my house be more warm?NO. The thermal properties of these bricks is comparable to normal clay bricks. Moreover for most of our constructions, the main source of heat gain or loss are the windows. The walling material plays only a nominal role.

What about drilling holes?We strongly recommend use of drilling machines for putting nails, etc. Direct nailing will chip off the plaster making the wall look uglier.

THESE BRICKS AVOID:

Use of best quality agricultural soil to make clay bricks.

Kilning process required for clay bricks.

Our bricks are manufactured using the latest technology, using industrial wastes which

would otherwise be land filled.

Manufacture & Use of Steam Cured Fly Ash Bricks is a step towards a more

ECO FRIENDLY and SUSTAINABLE building practices. As Architects . Engineers and Town Planers we need

your Support, Encouragement and Suggestions to make our product better.

THANK YOU

CONTACT US AT

C’CURE BUILDING PRODUCTS (P) LTD

PUNE: 9326777424 / 9823181060Telefax: 020-26653984

GOA: 9225907623 / 9373321212Telefax: 0832-2724514

: