Umbrella – Bevion Group AB

1

• BerDiz Consulting AB – www.berdiz.se

• Onsala Ingenjörsbyrå AB – www.onsala-ing.se

• Virtuell Design AB – www.virtuelldesign.se

• Synective Labs AB – www.synective.com

Bevion Group AB (www.bevion.se)

Berdiz is working in cluster of four companies in Bevion Group AB. Altogether we are about 75 engineers.

2017-09-06

• about 35 consultants at Process/Energy

• about 20 consultants at Vehicle industry, Sweden

• about 20 c:s at Electronics, Medical, Defence etc

About Us

2

BerDiz Consulting AB was founded in 2004 by CEO Samir Dizdar and Erik Bernessonwith head office in Gothenburg.

Erik: +46-733-791328erik.bernesson@berdiz.se

Samir: +46-704-589275samir.dizdar@berdiz.se

2017-09-06

Office: Ranängsgatan 8-10416 64Gothenburg

(just off the E6 Olskrokenjunction on the south west side)

Clients

3

• Nuclear active: Ringhals, Forsmark, SKB, Fauske (USA), Fortum

• Nuclear passive: Siemens Turbo Machinery, Alstom, Westinghouse, Barsebäck, Areva, Inspecta, OKG, Svafo

• Non Nuclear Mechanic: Volvo Aero (GKN), SKF, Emerson Process, Toyota (BT), Vector International A/S, SLU-AgriTech, ESS, Nynäs, St1, Järnforsen, GE - Alstom

• Electronics: Saab Aero, Autoliv, Actia, Toyota (BT), Emerson Process, Partner Tech, ST Ericsson, Sony Mobile, Kraftelektronik, Ruag, CEVT (within Bevion: Volvo Car, Volvo AB, Ericsson Microwave, Smart-Eye, NEVS m fl)

2017-09-06

Nuclear

2017-09-06 4

Analyzes, see next page

Nuclear

2017-09-06 5

Example of analyzes

Structural verificationQualification, RequalificationPiping-systems, Components, Steel-structures

Plastic Fatigue analysis: Increase life of component

FE-Analysis: Qualify failed components –NO unnecessary replacements!

Pipe-support analysis

Piping analysis: Pipestress & ANSYS

Excellent Analyzes Excellent Investment!

Fatigue analysisElastic, Plastic

Dynamic & stability analysisTools:PipestressANSYSCAE-pipe, AutoPipeEtc.

Our Consultancy Services

6

Mechanical calculationsEx: Requirement engineering, FEM,

stress & strength, pipe and thermal analysis, fatigue,

cracks, plasticity, multi-axiality, creep

Mechanical calculationsEx: Requirement engineering, FEM,

stress & strength, pipe and thermal analysis, fatigue,

cracks, plasticity, multi-axiality, creep

Mechanical constructionProcess construction, Pro-E, Inventor, AutoCAD, CAE Pipe

Mechanical constructionProcess construction, Pro-E, Inventor, AutoCAD, CAE Pipe

Programming & HW / ElectronicsAnalog / digital simulation,

EMC electrical engineering, CE-marking, Control systems

Programming & HW / ElectronicsAnalog / digital simulation,

EMC electrical engineering, CE-marking, Control systems

We have: ANSYS, Peps (Pipestress),Pro-E, CAE-pipe, Mathcad, Inventor,

AutoCAD, Relap5

New programs are purchased when necessary.

Codes used for evaluationEx: ASME III, ASME II, ASME VIII, ASME B16,ASME B31.3,

KTA, RCC-M, RCC-MRx, EN-13445, EN-13480, Eurocode 2, Eurocode 3, SSG, API:s, TKN, RN, ASCE, AFS,

ANSI, ISO, DIN, Colly and more

Codes used for evaluationEx: ASME III, ASME II, ASME VIII, ASME B16,ASME B31.3,

KTA, RCC-M, RCC-MRx, EN-13445, EN-13480, Eurocode 2, Eurocode 3, SSG, API:s, TKN, RN, ASCE, AFS,

ANSI, ISO, DIN, Colly and more

2017-09-06

Oil industry (Example calculation of pipe system)

2017-09-06 7

Tools:- Pipestress- Ansys

Nuclear (Example calculation of pipe system)

2017-09-06

8

Tools:- Pipestress- Ansys

Nuclear (Example calculation of pipe support)

2017-09-06 9

- Making model (secondary steel)- Calculation of stiffness- Stress analyses- Deflection analyses- Primary steel analyses- Reaction forces on the anchor

bolts

Nuclear (Example calculation of flange)

2017-09-06 10

Stress intensity

Mesh, support, load application

Model 360°

Materials Linearization paths

Total deformation

Nuclear (Example calculation of internal parts of reactor)

2017-09-06 11

Radial displacement due to internal pressure

Calculations of displacements due to internal pressure and thermal loads.

Axial displacement due to internal pressure

Radial displacement due to thermal loads

Axial displacement due to thermal loads

122017-09-06

• About 30 consultants, 27 full time

• M Sc. Engineers / Ph D or equivalent

• Several with Long experience, up to +40 years. Average 12 years

• Recruiting mostly through contacts, mostly former colleagues/students (finders fee). Very good notes – M Sc Physics –Winners “Teknik SM”.

BerDiz Employees Profile

132017-09-06

• The management system has been assessed and approved to the provisions of:

- ISO 9001:2015 (Quality Management)

- ISO 14001:2015 (Environmental Management)

- OHSAS 18001:2007 (Occupational Health and Safety Management)

ISO Certificates - BerDiz

Design Office in Bosnia

14

• Location: Stolac, outside Mostar

• Software: Hypermesh, Ansys, Pipestress, InventorLS-Dyna, Abaqus, AutoCAD, more….

• Manager: Samir Dizdar

• Staff: Up to 9 people

• Vice Manager: Smajo Tuka

2016-06-28

• Note:• Energy industry Sweden• Oil & Gas in Norway

2017-09-06

Mechanical Production in Bosnia

15

• Location: Stolac, outside Mostar

• Experience: since 2004

• Manager: Samir Dizdar

• Vice Manager: Smajo Tuka

• Clients: Lidan Maskin, HT Maskin, SKF Service, Järnforsen, Areva

• Example of products: conveying belt, up to 25 meters long

• Example of work: Machine work. Also with very narrow tolerances.More man-hours – better cost efficiency.

• www.berdiz.ba

2017-09-06

162017-09-06

• Mašinski fakultet u Mostaru (Univerzitet Džemal Bijedić)

- v.prof.dr. Safet Isić

•Fakultet strojarstva i računarstva (Sveučilište u Mostaru)- dr.sc. Remzo Dedić

• Mašinski fakultet u Podgorici (Univerzitet Crne Gore)- prof.dr. Radoslav Tomović

BerDiz contacts with Universities in former Jugoslavia

INTRODUKTION OF PROJECT BERDIZ - GIZ

Within the project “Dokvalifikacija mladih bosanksohercegovačkih inžinjera iz oblastimodernih softverskih aplikacija”, which is implementing on the basis of contract ondevelopment partnership between Deutsche Gesellschaft für InternationaleZusammenarbeit (GIZ) GmbH- German government development agency and the companyBerDiz Consulting AB Gothenburg, students get possibility to use the most modern softwares ANSYS andPIPESTRESS.

PIPESTRESS

Project realises by GIZ (Deutsche Gesellschaft für Internationale Zusammenarbeit, GmbH) and BerDiz Consulting AB (Company from Sweden) in cooperation with Masinski Fakultet and Strojarski fakultet inMostar.

ANSYS structural analysis software enables you to solve complex structural engineering problems and make better, faster design decisions. With the finite element analysis (FEA) tools available in the suite, you can customize and automate solutions for your structural mechanics problems and parameterize them to analyze multiple design scenarios. ANSYS structural analysis software is used throughout the industry to enable engineers to optimize their product designs and reduce the costs of physical testing.

PIPESTRESS performs all calculations by the nuclear (and non nuclear) piping codes in a single program execution. It has been used by more than 400 engineering organizations in 30 countries to analyze piping systems.

Through unique professional training in the work with modern software applications, ANSYS and PIPESTRESS students improved their knowledge in technical fields, are actively preparing for the future.This training increase their competitiveness in the labor market after completing the studies.