ultrasonic & optical - optimizersoptimizers-ems.com/new/pdf/ultrasonics-brochure.pdfultrasonic...

2
Ultrasonic Sensors: Todays ultrasonic sensors have an advantage over optical sensors because they emit a sound wave they will work under dust, dirt, fog and bright light where as an infra red detector could miss read when dust or dirt accumulates on the lens. Also an Ultrasonic sensor will detect a transparent film or reflective foil where an optical sensor may not. Ultrasonic sensors are ideally suited for modern manufacturing processes, for operations such as counting objects as they move along a conveyor or measuring fluid as it is filled into a container. The new range of programmable Smart sensors have an easy teach function allowing the reversal of the output from Normally closed to Normally open and vastly reducing the set up time. The Comus International group of companies consists of: Comus International 454 Allwood Road Clifton New Jersey 07012 U.S.A Tel: (1)973 - 777 - 6900 Fax:(1)973 - 777 - 8405 email: [email protected] internet: http://www.comus-intl.com Assemtech Europe Limited Unit 7, Rice Bridge Industrial Estate Thorpe - Le - Soken Essex England CO16 0HL Tel: +44 (0)1255 862236 Fax: +44 (0)1255 862014 email: [email protected] internet: http://www.assemtech.co.uk Comus Belgium BVBA Overhaamlaan 40 B-3700 Tongeren Belgium Tel: +32 (0)12 390400 Fax: +32 (0)12 235754 email: [email protected] internet: http://www.comus.be Switching Technologies Gunther B-9, B-10, & C-1 Special Economic Zone (MEPZ) Kadapperi Tambaram Chennai 600 045 India Comus Electronics and Technologies India Private Limited No 3. Kamaraj Nagar 2nd Street Tambaram Sanatorium Chennai 600045 India Tel: +91 44 43219090 Fax: +91 44 22628198 email: [email protected] [email protected] Website:http://www.comusindia.com Com/19/jan11/Iss.1 Our Switch Ranges: We have a comprehensive range of switches including: Reed Switches, Tilt Switches, Proximity Switches and Magnets, Electronic Proximity Switches, Non Mercury Tilt, Tip Over and Acceleration Switches, Float Switches, Glass Mercury and Mercury Switches, Optical Level Switches, Pressure Switches and Low Cost Alarm Switches. ISO 9001:2008 CERTIFICATE NO: FM 21080 ISO 9001:2008 CERTIFICATE NO: 03-12314 Comus Technologies BV Jan Campertstraat 11 6416 SG Heerlen, The Netherlands Tel: +31 (0) 45 5439345 Fax: +31 (0) 45 5427216 email: [email protected] (USA, Canada) [email protected] (Europe, Asia) 18 30 M18 Ø4 20 Distance LED 42 40 46 14 APX 150: Hysteresis APX 500: toff 38 Ø4 40 65 74 / 104 30 / 60 40 / 70 20 7 39 5 15 30 22,5 Ø4 80 52 40/70 92 / 122 54 / 84 54 42 40 46 14 20 Transmitter Intensity LED 18 30 M18 Ø4 Automated Access The AOPD optical proximity switch is the base electronics for the AFOY scanner and AFOI barrier fibre optics. It can also act as a stand alone optical proximity switch. With it’s clocked infrared light source it can detect objects at high distances and is suited to a long and thin wave guide. The electronics are housed in a robust metal enclosure and when used with the glass fibre wave guides is a very robust detection device for small parts under difficult conditions. The switching distance can be memorised by way of the teach in keys or by an external signal. The change from NO to NC switching can also be adjusted by the keypad. Optical wave guide sensors are ideally suited to detect in confined spaces. Glass fibre guides are more robust and have a longer service life than plastic guides. The AFOY guide acts as act as a scanner detecting an object when it passes the invisible light beam at a preselected distance. The AFOI sensor works as a light barrier, when the invisible light is interrupted by an object the sensor switches. The APY ultrasonic switch is used instead of a conventional electric wall mounted switch when a non contact operation is necessary (eg automated doors for the disabled or in hospitals) This complies with certain hygienic demands (food processing industry, clean rooms etc). The sensor reacts to presence not movement so there is no waving of hands needed, as soon as an object ie a hand is within the 30cm detection zone the sensor will operate, it has a 100% background suppression. The advantage of ultrasonic sensors compared to optical switches is that they are less susceptible to dirt and fully water resistant. Optical Range Please scan the code box with your QR enabled smart phone. Dimensions 23 8 24 90 44 54 84 30 Viton O ring 17 M8x1 LED Stainless steel & Polyamide Ø4,2 PTFE 30 LED Polyamide M8x1 Connector M12x1 M12x1 Ø16 Ø8 12 Connector M12x1 M12x1 Ø16 APS 150 CP APS 150 FB APS 200 34 92 29 72 30 13 70 41 28 M30 32 59 12 M12 APR Range APS Range APL Range AOPF Range Dimensions APK Range APX Range APF Range APB Range We also have a large network of worldwide agents. These can be found on any of our websites, or on our company profile brochure

Upload: others

Post on 01-Nov-2020

13 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ULTRASONIC & OPTICAL - Optimizersoptimizers-ems.com/new/pdf/ultrasonics-brochure.pdfUltrasonic Sensors: Todays ultrasonic sensors have an advantage over optical sensors because they

Ultrasonic Sensors:Todays ultrasonic sensors have an advantage over optical sensors because they emit a sound wave they will work under dust, dirt, fog and bright lightwhere as an infra red detector could miss read when dust or dirt accumulates on the lens. Also an Ultrasonic sensor will detect a transparent film orreflective foil where an optical sensor may not. Ultrasonic sensors are ideally suited for modern manufacturing processes, for operations such as countingobjects as they move along a conveyor or measuring fluid as it is filled into a container. The new range of programmable Smart sensors have an easyteach function allowing the reversal of the output from Normally closed to Normally open and vastly reducing the set up time.

The Comus International group of companies consists of:

Comus International 454 Allwood RoadCliftonNew Jersey 07012U.S.A

Tel: (1)973 - 777 - 6900Fax:(1)973 - 777 - 8405email: [email protected]: http://www.comus-intl.com

Assemtech Europe LimitedUnit 7, Rice Bridge Industrial EstateThorpe - Le - SokenEssexEnglandCO16 0HLTel: +44 (0)1255 862236Fax: +44 (0)1255 862014email: [email protected]: http://www.assemtech.co.uk

Comus Belgium BVBAOverhaamlaan 40B-3700 TongerenBelgium

Tel: +32 (0)12 390400Fax: +32 (0)12 235754email: [email protected]: http://www.comus.be

Switching Technologies GuntherB-9, B-10, & C-1 Special Economic Zone (MEPZ)KadapperiTambaramChennai 600 045India

Comus Electronics and TechnologiesIndia Private LimitedNo 3. Kamaraj Nagar 2nd StreetTambaram SanatoriumChennai 600045IndiaTel: +91 44 43219090Fax: +91 44 22628198email: [email protected]@comus-intl.comWebsite:http://www.comusindia.com

Com/19/jan11/Iss.1

Our Switch Ranges:We have a comprehensive range of switches including: Reed Switches, Tilt Switches, Proximity Switches and Magnets, Electronic Proximity Switches, NonMercury Tilt, Tip Over and Acceleration Switches, Float Switches, Glass Mercury and Mercury Switches, Optical Level Switches, Pressure Switches and Low CostAlarm Switches.

ISO 9001:2008CERTIFICATE NO: FM 21080

ISO 9001:2008CERTIFICATE NO: 03-12314

Comus Technologies BVJan Campertstraat 11 6416 SG Heerlen, The Netherlands

Tel: +31 (0) 45 5439345 Fax: +31 (0) 45 5427216email: [email protected] (USA, Canada)

[email protected] (Europe, Asia)

1830

M18

Ø4

20

Distance

LED

42

40

46

14

APX 150: HysteresisAPX 500: toff

38

Ø4

40

65

74 / 104

30 / 60 40 / 70

20

7

39

5

15

30

22,5

Ø4

80

52

40/70

92 / 122

54 / 84

54

42

40

46

14

20

Transmitter Intensity

LED

1830

M18

Ø4

Automated Access

The AOPD optical proximity switch is the base electronics for the AFOY scanner and AFOI barrier fibreoptics. It can also act as a stand alone optical proximity switch. With it’s clocked infrared light source itcan detect objects at high distances and is suited to a longand thin wave guide. The electronics are housed in a robustmetal enclosure and when used with the glass fibre waveguides is a very robust detection device for small parts under

difficult conditions.The switchingdistance can bememorised by wayof the teach in keys or by an external signal. The changefrom NO to NC switching can also be adjusted by the keypad.

Optical wave guide sensors are ideally suited to detect in confined spaces. Glass fibre guides are morerobust and have a longer service life than plastic guides. The AFOY guide acts as act as a scanner detecting anobject when it passes the invisible light beam at apreselected distance.The AFOI sensor works as a light barrier, when theinvisible light is interrupted by an object the sensorswitches.

The APY ultrasonic switch is used instead of a conventionalelectric wall mounted switch when a non contact operation isnecessary (eg automated door s for the disabled or in hospitals)This complies with certain hygienicdemands (food processing industry,clean rooms etc). The sensor reacts to presence notmovement so there is no waving ofhands needed, as soon as an objectie a hand is within the 30cmdetection zone the sensor willoperate, it has a 100% backgroundsuppression. The advantage of ultrasonic sensors compared tooptical switches is that they are less susceptible to dirt and fullywater resistant.

Optical Range

Please scan the code box withyour QR enabled smart phone.

Dimensions

12 Sens

60

90

10

120

LED

M8

Ø4.3Ø4.320

100

37 15 10

10

22

144

5

60

10

80

83

5

8010

8

4,5

15

60

35

15

10

Sens

NO/NC

4,560

178

1030

5

10

9,5

338

9,5

15

10

Sens

NO/NC

4,510 80

178

10

5

9,5

538

9,5

8

5015

10

12

20

30

Sens

NO/NC

4,510

55

15

80

88

5

8015

9,5

12

45

Sens

NO/NC

60

15

90

10

120

15

LED

M8

LED

M8

LEDM8

25

LEDM8

Ø4.3

Ø4.3

Ø4.3

Ø4.3

Ø4.3

Ø4.3

Ø4.3

20

25

810

10

60

30

5

35

10

10

12

20

30

Sens

NO/NC

4,5

338

4,5

10

12

20

30

Sens

NO/NC

4,5

4,5

10

55

1050

10

80

538

Ø4.3

Ø4.3

5

10

12

20

30

Sens

NO/NC

4,510

55

23

8

2490

44

54

84

30Viton O ring

17

M8x1LED

Stainless steel &Polyamide

Ø4,2

PTFE

30

LED

Polyamide

M8x1

Connector

M12x1 M12x1

Ø16Ø8

12

Connector

M12x1

M12x1

Ø16

APS 150 CP

APS 150 FB

APS 200

34

92

29

72

30 13

7041

28

M30

32

59

12

M12

APR Range

APS Range APL Range

AOPF Range

DimensionsAPK Range APX Range

APF Range APB Range

We also have a large network of worldwide agents. These can be found on any of our websites, or on our company profile brochure

Page 2: ULTRASONIC & OPTICAL - Optimizersoptimizers-ems.com/new/pdf/ultrasonics-brochure.pdfUltrasonic Sensors: Todays ultrasonic sensors have an advantage over optical sensors because they

ULTRASONIC & OPTICAL SENSORS BARRIERS

TYPE APK 500 APK 1000 APK 2500 APK 5000 APX 150 APX 500 APF-A 30/8 APF-A 60/8 APF-A 40/13 APF-A 70/13 APB 1500 AOPF 30 AOPF 50 AOPF 80 AOPF 120 AOPFL APY 702 APR 1003 APR 1503 APS 200 TVPA 24C APS 200 TOR 24CA APS 200 TOR24CI APL 200

Detection Range mm 80-500 135-1000 250-2500 400-5000 0-170 0-500 detection width 8 detection width 8 detection width 13 detection width 13 0-1500 Fork width 30 Fork width 50 Fork width 80 Fork width 120 Fork width 30-120 300 0-1000 0-1500 20-200 20-200 20-200 0-200

Detection Range (Large Objects) mm 80-800 135-1500 250-3000 400-6500 - - - - - - - Red Emitted Light 660nm, clocked class 2 laser - - - - - - 200mm Fixed switch distance

Blind Range mm 0-80 0-135 0-250 0-400 - - - - - - - - - - - - - 0-180 0-180 20 20 20 -

Adjustment Range mm 80-500 135-1000 250-2500 400-5000 60-170 120-500 - - - - - - - - - - - 180-1000 - - - - -

Hysteresis of Binary output axial mm 15 25 40 80 10-40 10 - - - - - 0.25 0.02 - 45-15 - - - - 16

Linearity of analogue output %FS <±0.5% <±0.5% <±0.5% <±0.5% - - <±2% <±2% <±4% <±4% - - - - - - - <1% <0.5% - <1% <1% -

Accuracy Across temperature range %FS <1 <1 <1 <1 - - - - - - - - - - - - - ±1% ±1% - - - -Status Indicator Red/Green LED Red/Green LED Red/Green LED Red/Green LED Red LED Red LED 3 LED in keyboard 3 LED in keyboard 3 LED in keyboard 3 LED in keyboard Trans Green/Ind Yell LED Yellow LED Yellow LED Yellow LED Yellow LED Yellow LED - Red LED Red LED Red/Yellow LED Red/Yellow LED Red/Yellow LED Red LED

Binary Output, short circuit proof, Max 0.1A PNP,NPN,NO,NC PNP,NPN,NO,NC PNP,NPN,NO,NC PNP,NPN,NO,NC PNP,NPN,NO,NC PNP,NPN,NO,NC - - - - PNP,NPN,NO,NC PNP,NO,NC switchable PNP,NO,NC switchable PNP,NO,NC switchable PNP,NO,NC switchable PNP,NO,NC switchable Relay (1 change switch NO NC) PNP,NPN,NO,NC PNP,NPN,NO,NC PNP,NO/NC PNP,NO/NC PNP,NO/NC PNP,NPN,NO, NC

Resolution %FS 0.2% 0.1% 0.1% 0.1% - - 0.1@20-80% covered 0.15@0-100% covered - Resolution smallest 0.5mm Resolution smallest 0.5mm Resolution smallest 0.5mm Resolution smallest 0.8mm Resolution smallest 0.5mm - - - - - - -

Switching Speed Max/Operating frequency Hz/kHz 8/180 5/180 3/120 2/80 15/350 2/175 samples 500/180 samples 285/130 samples 800/switches 200 4kHz 4kHz 4kHz 2kHZ 3kHZ 180 7/180 Operate frequency 180 13/400 13/400 13/400 15/350

Analogue output in detection range (versions)RL min.10kΩ with V output VRL max.500Ω with mA output mA

0-10bzw 10-0V4-20mA bzw 20-4mA

0-10bzw 10-0V4-20mA bzw 20-4mA

0-10bzw 10-0V4-20mA bzw 20-4mA

0-10bzw 10-0V4-20mA bzw 20-4mA

- - 0-10V output signal 0-10V output signal 0-10V output signal 0-10V output signal - - - - - -Switch Voltage relay 30V AC/DC

Switch Current relay 6A 0-10V 10-0V

4-20mA 0-10V 10-0V

4-20mA 0-10V 4-20mA

-

t/on,t/off binary output (depending on potentiometer setting) ms 50/80 130/90 200/120 700/140 5/40 2/10 - - - - 3-400/<3 - - - - - 0.1sec 3sec <100 - 30 - - 5/40

Ripple of analogue output mV ±60 ±20 ±15 ±20 - - - - - - - - - - - - - ±100 ±100 - - - -

Tracking speed of analogue output s/95%FS 0.06 0.25 0.4 <2 - - - - - - - - - - - - - <0.4 <0.4 - - - -

Power supply voltage (reverse polarity protection) VDC 15-30 15-30 15-30 15-30 12-28 12-28 8-30 8-30 8-30 8-30 18-30 10-35 10-35 10-35 10-35 10-35 - 18-33 18-33 10-30 15-30 10-30 12-28

Ripple of supply voltage % <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 - - - - - <10 <10 <10 <10 <10 <10 <10

Mean consumption, switched without load mA 60 60 60 65 45 55 Power consumption 0.9W Power consumption 0.9W Power consumption 0.9W Power consumption 0.9W Mean consumption 10mA Min Mean consumption <30mA 60 35 35 30 30 30 45

Peak current, switched without load mA 85/0.1ms 85/0.1ms 95/0.2ms 100/0.3 100/0.05 250/0.1 Square wave signal 3.5-30V Square wave signal 3.5-30V Square wave signal 3.5-30V Square wave signal 3.5-30V Mean consumption 35mA Max Voltage drop <2.8V - 300mA / 0.1 ms 300mA / 0.1 ms - - - -

Temperature coefficient of sensor mV/°K - - - - -0.1 -0.1 min signal duration 0.02ms min signal duration 0.02ms min signal duration 0.02ms min signal duration 0.02ms Peak consumption 15mA Min - - - - - - typ +4 typ +4 - - - -

Temperature coefficient of air path %/°K -0.17 (increasing temperature → output decreases) -0.17 -0.17 Max sample freq 500Hz Max sample freq 500Hz Max sample freq 285Hz Max sample freq 285Hz Peak consumption 55mA Max - - - - - - -0.17 (increasing temperature → output decreases) - - - -

Ambient temperature during operation °C -20 to 50 -20 to 50 0 to 60 0 to 60 -20 to 50 -10 to 60 5-45 -20 to 50 -20 to 50 -20 to 50 -20 to 70 -20 to 70 -20 to 70 -20 to 50

Sensor temperature during operation °C -20 to 70 -20 to 70 -10 to 70 -10 to 70 -20 to 50 Amb light immunity 80,000Lx Amb light immunity 80,000Lx Amb light immunity 80,000Lx Amb light immunity 50,000Lx Amb light immunity 100,000Lx - -20 to 70 -20 to 70 - - - -20 to 70

Pressure range mbar abs 900 - 1100 900 - 1100 - - - - 900 - 1100 - - - - - - 900-1100 - - - 900-1100

Mass without cable g 90 90 90 105 50 50 - - - - 45- - - - - - 45 45 25 25 25 100

Protection class IP 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 67 65 65 65 67

Housing material Polyamide glass -fibre reinforced Polyamide and stainless steel Black anodised Aluminium Black anodised Aluminium Black anodised Aluminium Black anodised Aluminium Polyamide and stainless steel Zinc die cast, black lacquerered Aluminium, black elox Polyamide Polyamide or V2A Stainless steel Nickel plated Brass Nickel plated Brass

Electrical connection M8 Connector 4 pin or integrated cable M8 connector or integrated cable Max cable length 20m Max cable length 20m Max cable length 20m Max cable length 20m 3 pin connector 8mm M8 connector 3 pin Screw terminal M8 connector or integrated cable M12 connector, 4 pin M12 connector

OPTICAL