ultrasonic air bubble sensors oud-2m series※2)p/n“oud-2m-f050” and “oud-2m-m100” of the...

2
New PRoDuct What is an air bubble sensor? Specifications Part number ※1 OUD-2M-F028- ** OUD-2M-F050- ** (FYI) ※2 OUD-2M-M100- ** (FYI) ※2 Appearance image Input voltage 5.0 VDC ±5% Current consumption 30 mA max. Operating frequency 2.0 MHz ±20 % Response (Digital output) 1 ms Analog output voltage Empty tubing: 0~0.5 VDC Tubing full of water: 0.5~4.0 VDC Digital output voltage Empty tubing (when detecting bubbles): Logic Low(0~0.1VDC) Tubing full of water: Logic High(4.5~5.0 VDC) Recommended tubing ※3 (Outer diameter • Material) φ3.5 mm ~ φ4.0 mm・silicon φ6.0 mm ~ φ7.0 mm・silicon φ6.0 mm ~ φ16.0 mm・silicon Detectable bubble size φ0.83 mm / 0.3 µ L or more φ1.0 mm / 0.5 µ L or more Cable AWG26 × 4 C (φ 0.48 mm ) / Outer diameter φ 3.1 mm, Length 1,000 mm Operating temperature 10°C~40°C Storage temperature - 10°C~60°C The air bubble sensor is a sensor to detect bubbles and liquid outage in the liquid sending tubing. It's for devices where bubbles and liquid outage are meant to be avoided su, and analytica, t, etc. Ultrasonic bubble sensors can be applied to colored tubing or opaque liquid where , e. Mechanism of sensor The piezoelectric transducer on one side will produce ultrasonic waves and send them through the tubing to the opposite piezoelectric transducer which will observe the received signal strength continuously. The conductivity of ultrasonic waves is different between liquid and bubbles. The ultrasonic waves will be transmitted well when there is only liquid in the tube, but when bubbles are passing, the ultrasonic waves will be blocked by the bubbles, and the received signal strength from ultrasonic waves will become weak. The ultrasonic bubble sensor makes the use of this relationship to detect bubbles. Sensor (Transmitter) Sensor (Receiver) Tube Bubble Receive strength: Strong Receive strength: Strong FEATURES Sensors capable of detecting tiny bubble 0.83 mm / 0.3 μL or more) by using ultrasonic wave Not affected by the color of the liquid or tubing Standard equipment with digital output (by setting the threshold voltage) and analog output Customizable according to the tubing being used ※1)The suffix “**” in part number(P/N) means a value of the threshold voltage. For the details, please refer to “Output” on the next page. ※2)P/N “OUD-2M-F050” and “OUD-2M-M100” of the above are not available as a standard lineup, so please contact us for the details. ※3)Tubing with a small diameter may also be possible by using an adapter tube, so please contact us. Liquid Ultrasonic air bubble sensors Ultrasonic air bubble sensors OUD-2M OUD-2M SERIES SERIES Ultrasonic air bubble sensors Ultrasonic air bubble sensors OUD-2M OUD-2M SERIES SERIES Manufactured by ODTech Co., Ltd. Sensor (Transmitter) Sensor (Receiver) Receive strength: Weak Receive strength: Weak

Upload: others

Post on 26-Jan-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Brochure_Air-bubble Sensors_OUD-2M series_Nidec Copal ElectronicsSpecifications
Part number1 OUD-2M-F028- OUD-2M-F050-FYI2 OUD-2M-M100-FYI2
Appearance image
Input voltage 5.0 VDC±5%
Current consumption 30 mA max.
Operating frequency 2.0 MHz±20%
Response (Digital output) 1 ms
Analog output voltage Empty tubing: 0~0.5 VDC Tubing full of water: 0.5~4.0 VDC
Digital output voltage Empty tubing (when detecting bubbles): Logic Low0~0.1VDC Tubing full of water: Logic High4.5~5.0 VDC
Recommended tubing3 Outer diameter • Material φ3.5 mm ~φ4.0 mmsilicon φ6.0 mm ~φ7.0 mmsilicon φ6.0 mm ~φ16.0 mmsilicon
Detectable bubble size φ0.83 mm / 0.3 µL or more φ1.0 mm / 0.5 µL or more
Cable AWG26× 4C (φ0.48 mm) / Outer diameter φ 3.1 mm, Length 1,000 mm
Operating temperature 10 °C~ 40 °C
Storage temperature -10 °C~ 60 °C
New PRoDuct
The air bubble sensor is a sensor to detect bubbles and liquid outage in the liquid sending tubing. It's for devices where bubbles and liquid outage are meant to be avoided such as medical and analytical equipment, etc. Ultrasonic bubble sensors can be applied to colored tubing or opaque liquid where optical methods are incapable.
Mechanism of sensor The piezoelectric transducer on one side will produce ultrasonic waves and send them through the tubing to the opposite piezoelectric transducer which will observe the received signal strength continuously. The conductivity of ultrasonic waves is diff erent between liquid and bubbles. The ultrasonic waves will be transmitted well when there is only liquid in the tube, but when bubbles are passing, the ultrasonic waves will be blocked by the bubbles, and the received signal strength from ultrasonic waves will become weak. The ultrasonic bubble sensor makes the use of this relationship to detect bubbles.
Sensor (Transmitter)
Sensor (Receiver)
Tube Bubble
Receive strength: StrongReceive strength: Strong
FEATURES Sensors capable of detecting tiny bubble (φ0.83 mm /0.3 µL or more) by
using ultrasonic wave Not affected by the color of the liquid or tubing Standard equipment with digital output (by setting the threshold voltage)
and analog output Customizable according to the tubing being used
1The suffi x “” in part number (P/N) means a value of the threshold voltage. For the details, please refer to “Output” on the next page. 2P/N “OUD-2M-F050” and “OUD-2M-M100” of the above are not available as a standard lineup, so please contact us for the details. 3Tubing with a small diameter may also be possible by using an adapter tube, so please contact us.
Liquid
OUD-2M OUD-2M SERIESSERIES
Sensor (Transmitter)
Sensor (Receiver)
Applications
4
2.8
16
1210
3
Output
Liquid
Analog output Depending on the detected bubble size, the output voltage will decrease. The larger the bubble is, the more it decreases.
Digital output With the threshold voltage set according to the analog output voltage when the tubing is full of water, digital output will change from Hi to Low level when analog output voltage is less than the threshold voltage. The threshold voltage can be set to 0.1V, 0.2 V, 0.3 V, 0.4 V or 0.5 V.
Analog output
Threshold voltage
Unit: mm
Equipment where bubbles are meant to be avoided Infusion pump Hemodialysis equipment
Bottle or tank in case of liquid outage Industrial ink-jet printer Haemocyte analyser
Blood purification equipment Hemanalysis equipment
Biochemical analyser Dispensers of fluid and chemical
Biochemical analyser Liquid chromatograph
White Digital output
Black Analog output
Blue GND (-) Cable: AWG26× 4C (φ0.48 mm), Outer diameterφ3.1 mm, Length 1,000 mm
NIDEC COPAL ELECTRONICS CORP. (Head Offi ce) 7-5-25 Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023 JAPAN Phone: +81-3-3364-7055 Fax: +81-3-3364-7098
NIDEC COPAL ELECTRONICS, INC. 367 Van Ness Way, Suite 601 Torrance, CA 90501 U.S.A Phone: +1-310-618-0225 Fax: +1-310-618-9984
NIDEC COPAL ELECTRONICS (SHANGHAI) CO.,LTD. Unit A, 4/F, No.4 Bldg., No.253, Ai Du Rd., Wai Gao Qiao Free Trade Zone, Shanghai 200131, CHINA Phone: +86-21-5046-3009 Fax: +86-21-5046-3115
202002E0000
NIDEC COPAL ELECTRONICS (TAIWAN) CO.,LTD. 18F-1, No.57, Sec.2, Tun Hwa S.Rd., Taipei 106, TAIWAN Phone: +886-2-27030577 Fax: +886-2-27010577
NIDEC COPAL ELECTRONICS GmbH Mergenthalerallee 79-81 65760 Eschborn GERMANY Phone: +49-6196-92775-0 Fax: +49-6196-92775-75
NIDEC COPAL ELECTRONICS KOREA CORP. C- 406, Woolim Lion's Valley 168, Gasan digital, Geumcheon-gu, Seoul, 08507, KOREA Phone: +82-2-3482-5861 Fax: +82-2-3482-5860
NIDEC COPAL ELECTRONICS SINGAPORE PTE. LTD. 180B Bencoolen Street #07-05 The Bencoolen Singapore 189648 Phone: +65-6535-0056 Fax: +65-6535-0087
Specifi cations are subject to change without prior notice.
NIDEC COPAL ELECTRONICS CORP. (Head Offi ce) 7-5-25 Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023 JAPAN Phone: +81-3-3364-7055 Fax: +81-3-3364-7098
NIDEC COPAL ELECTRONICS, INC. 367 Van Ness Way, Suite 601 Torrance, CA 90501 U.S.A Phone: +1-310-618-0225 Fax: +1-310-618-9984
NIDEC COPAL ELECTRONICS (SHANGHAI) CO.,LTD. Unit A, 4/F, No.4 Bldg., No.253, Ai Du Rd., Wai Gao Qiao Free Trade Zone, Shanghai 200131, CHINA Phone: +86-21-5046-3009 Fax: +86-21-5046-3115
202002E0000
NIDEC COPAL ELECTRONICS (TAIWAN) CO.,LTD. 18F-1, No.57, Sec.2, Tun Hwa S.Rd., Taipei 106, TAIWAN Phone: +886-2-27030577 Fax: +886-2-27010577
NIDEC COPAL ELECTRONICS GmbH Mergenthalerallee 79-81 65760 Eschborn GERMANY Phone: +49-6196-92775-0 Fax: +49-6196-92775-75
NIDEC COPAL ELECTRONICS KOREA CORP. C- 406, Woolim Lion's Valley 168, Gasan digital, Geumcheon-gu, Seoul, 08507, KOREA Phone: +82-2-3482-5861 Fax: +82-2-3482-5860
NIDEC COPAL ELECTRONICS SINGAPORE PTE. LTD. 180B Bencoolen Street #07-05 The Bencoolen Singapore 189648 Phone: +65-6535-0056 Fax: +65-6535-0087
Specifi cations are subject to change without prior notice.