ultra clean and sleek flush glazed window unit · advantages of the arcoplast flush glazed window...
TRANSCRIPT
Fully Integrated Extrusion
Lightweight Extrusion
Anodized Finish
Corrosion Resistant
Double Wall Construction for Strength and Rigidity
Desiccant Pillow Pack Chamber
Design for Standard Metal Framing Construction
Arcoplast NEW flush glazed interior windows are completely sealed using a fully integrated extrusion. This innovative design offers unlimited window dimensions and integrates into standard metal
framing construction. The windows are fully integrated into the Arcoplast system and is bonded together and sealed in one step with a two-compo-nent mix of high-stength finishing compound.
Ultra clean and sleek flush glazedwindow unit
1873 Williamstown Drive, St. Peters, Missouri 63376Phone 636-978-7781, Fax 636-978-7782
Composite Surfaces for Critical Environmentswww.arcoplast.com
Flush Glazing
Variable Pane Thickness
Single or Double Pane Assembly
Permanently Finished
Limitless Dimensions
Easy On-site Assembly
Concealed Extrusion
Ultra Clean Sleek Flush Glazing Section
Arcoplast Flush Glazed Window
• Simple Construction Methodology• Delivers air, moisture and gas leak tight unit• Resistant to Fungi & Bacteria and does not
support microbial growth• Resistant to high pressure wash, sanitation and
decontamination regimen• Meets regulatory requirements including FDA
21 CFR• Greater installation flexibility reducing
significantly the project timeline• Arcoplast composite materials with virtually no
maintenance cost and extremely long life cycle combine create highly sustainable performance
Advantages of the Arcoplast Flush Glazed Window System
Windows Integrated for a seamless flush surface finish
3. Fully integrated extrusion creates a rigid window frame assembly
Conforms to Laboratory Biosafety Guide-lines: 3rd Edition (2004) Public Health Agency of Canada on Pressure Decay (leak tightness)
4. Window frame extrusion fits standard 3 5/8” (92mm) metal stud construction
1. Engineered L-bracket slips into extrusion slot
2. Second side of L-bracket becomes the mounting plate for the vertical jamb extrusion and is held in place with 4 screws
5. Final window frame and single or double pane assembly is completely sealed and flush within the Arcoplast Wall System
1873 Williamstown Drive, St. Peters, Missouri 63376Phone 636-978-7781, Fax 636-978-7782
Composite Surfaces for Critical Environmentswww.arcoplast.com