Quilt design and pattern instruction by Larene Smith, all rights reserved. Copyright 2015.

-

Part

Note: Refer to the Finished Blocks as a guide as all blocks are sewn the same way except thatthe “SKYLINE” focus print changes direction.

Step 2 – Preparing the Sets and Focus SquareSet A

7. Sew (1) Fabric D 1” x WOF strip to (1) Fabric E 2-1/2” strip then sew (1) moreFabric D 1” x WOF strip to the opposite edge to measure 3-1/2” x WOF –Make (3) new strips – Sub-cut into (40) 2-1/2” x 3-1/2” rectangles.

8. Sew (1) Fabric D 1” x 3-1/2” rectangles to the remaining two edges to make asquare at 3-1/2” – Make (40) – Label “Set A” as illustrated in Example A – setaside for use later.

Set B9. Sew (1) Fabric D 1” x WOF strip to (1) Fabric F 2-1/2” strip then sew (1) more

Fabric D 1” x WOF strip to the opposite edge to measure 3-1/2” x WOF –Make (3) new strips – Sub-cut into (40) 2-1/2” x 3-1/2” rectangles.

10. Sew (1) Fabric D 1” x 3-1/2” rectangles to the remaining two edges to make asquare at 3-1/2” – Make (40) – Label “Set B” as illustrated in Example A – setaside for use later.

Set C11. Sew (1) Fabric D 1” x WOF strip to (1) Fabric B 2-1/2” strip then sew (1) more

Fabric D 1” x WOF strip to the opposite edge to measure 3-1/2” x WOF –Make (2) new strips – Sub-cut into (20) 2-1/2” x 3-1/2” rectangles.

12. Sew (1) Fabric D 1” x 3-1/2” rectangles to the remaining two edges to make asquare at 3-1/2” – Make (20) – Label “Set C” as illustrated in Example A – setaside for use later.

Focus Square13. Sew (1) Fabric D 1” x 8-1/2” rectangle to the left and right sides of (1) Fabric A

8-1/2” square then sew (1) 9-1/2” x 1” rectangle to the top andbottom to finish the set at 9-1/2” square – Label “Focus Set” –Make (20) and set aside for use later.

Step 3 – Sewing Sets A, B, and C Together14. Sew the following pieces together as follows to measure 9-1/2” x

3-1/2” from left to right as illustrated in Example B “Part 1” – SetA, Fabric B 3-1/2” square, Set B – Make (20) – Label “Part 1” andset aside for use later.

15. Sew the following pieces together as follows to measure 12-1/2”x 3-1/2” from left to right as illustrated in Example B “Part 2” –Set B, Fabric B 3-1/2” square, Set A, Set C – Make (20) – Label “Part 2” and set asidelater.

Step 4 – Sewing the BlocksNote: Always refer to the illustrations of the FINISHED BLOCKS as a guide.

16. Block A – Sew (1) “Part 1” to the left side with Set B towards the bottom to (1) “Focto measure 12-1/2” x 9-1/2”, then sew (1) “Part 2” to the TOP with Set B towards thfinish the block at 12-1/2” square – Make (6) – Label “Block A” and set aside for use

17. Block B – Sew (1) “Part 1” to the right side with Set B towards the bottom to (1) “Foto measure 12-1/2” x 9-1/2”, then sew (1) “Part 2” to the top with Set B towards thefinish the block at 12-1/2” square – Make (6) – Label “Block B” and set aside for use

Example ASet A

Set B

Set C

Example BPart 1

2

for use

us Square”e right tolater.cus Square”left to

later.