uk perkins aps p13 kva - apsuae.com · uk perkins aps p13 kva ... mecc alte uk/ leroy somer tal 3...
TRANSCRIPT
UK PERKINSAPS P13 kVA
GENERATOR FEATURES
ENGINE DATA ALTERNATOR DATA
Manufacturer/Model
Cylinder Arrangement
Displacement
Bore And Stroke
Compression Ratio
Rated Rpm
Gross Bhp @ Prime Power
Gross Bhp @ S.By Power
Governor Type
UK Perkins, 403A-15G
3 Vertical In line
1.496 Litres
84 x 91 mm
22.5 : 1
1500
16.5
18.1
Mechanical
Manufacturer
Number of Phase
Power factor
Number of pole
Insulation
Temperature Rise
Total Harmonics (TGH/THC)
Exciter Type
Number Of Bearing
Mecc alte UK/ Leroy somer TAL
3
0.8
4
Class H
Class F
< 2% (AT NO LOAD)
Shunt
One
POWER
FEATURES
Prime Power – 400/230V @ 50 Hz: 10.4 kW / 13 kVA Stand by Power- 400/230V @ 50 Hz: 11.4 kW / 15 kVA
Ÿ Engine (UK Perkins 403A-15G) Ÿ 12v Charge alternator Ÿ Governor: Mechanical Ÿ Alternator (Mecc alte UK / Leroy somer TAL) Ÿ Single bearing alternator IP 23,insulation class H Ÿ Radiator 50° C (122 F) Ÿ Skid and vibration isolators Ÿ Dry type air filter Ÿ Main line circuit breaker Ÿ 12v Battery , Rack and Cable Ÿ Industrial silencer Ÿ User manual
OPTIONAL ITEMSEngine & Radiator
Ÿ Heat shield protection exhaustŸ Oil drain extensionŸ Lube oil drain pumpŸ Stone Protection guardŸ Battery chargerŸ Engine Block heaterŸ Battery Isolator
Fuel SystemŸ 12 or 24 Hours day tankŸ Bulk fuel tank connections Ÿ Fuel / Water separator filter (Racor)
AlternatorŸ Anti-Condensation HeaterŸ Alternator Dust FiltersŸ PMG excitationŸ Single phase
ExhaustŸ Residential, Critical SilencerŸ Flexible exhaust connection
EnclosureŸ EM-1,5 Ÿ 75 dBA @ 1m Ÿ Dimension mm (L x W x H) – 1560 x 760 x 960
Control PanelŸ Deep sea Electronics
* For more technical information, please refer to the website below.
RPP: Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance with ISO 8528-1. A 10% overload capability is available for a period of 1 hour within 12hour period of operation, in accordance with ISO 3046-1. ESP: The standby power rating is applicable for supplying emergency power in variable load applications in accordance with ISO 8528-1. Overload is not allowed
Picture shown above is only for illustration purpose, May contain optional item. In Line with Our Policy of Continuous Development, We reserve The Right to Change Specification without Notice
www.apsuae.com