uf3: ultrasonic fork sensor for transparent labels · the uf ultrasonic fork sensor reliably...
TRANSCRIPT
T
UF3: Ultrasonic fork sensor for transparent labels
DA
TA
S
HE
ET
The ultrasonic fork sensor is
tasked with the safe detection of
totally different labels on totally
different carrier materials. High
positional accuracy and stable
response times make the fork
sensor universally applicable.
■ Fork width 3 mm■ Fork depth 69 mm■ Ultrasonic technology■ Detection of transparent labels
on transparent carrier materials■ Detection of metallised material
and of RFID labels■ Precise detection of opaque
printed and coloured labels■ Unaffected by metal or colour■ Precise splice detection■ Double-sheet detection
Ultrasonic fork sensor
2 SENSICK 2007-08-31
All types
Screw for removing the leg for cleaning purposesFork width: Fork width 3 mm, Fork depth 69 mmMounting holes, Ø 4.2 mmDetection axisFunction indicator (yellow), switching outputFunction indicator (red)“+”-/“–” buttons and function button
Ultrasonic fork sensor UF3
1L+
QP
M
QN
4
3
2
brn
blk
blu
wht
Detection of labels – whether transparent, opaque or printed
Unaffected by metallised colours
Accurate detection through stable response time
Small, industry-standard housing
AccessoriesCables and connectors
Fork width3 mm
– 3s
– 6s
+–
65
7
1
2
3
4
5
6
Dimensional drawing
4-pin, M8
All types
Ultrasonic fork sensor
Connection types
Adjustments possible
Dimensions
Dimensions A B C(mm) Fork width Fork depth
UF3 3 69 14
6 10
19
7
B
8
22
.5
61
6
A2
2.5
C
11
4.2
1
3
2
4
7
All types
2007-08-31 SENSICK 3
UF3
UF3-70B410 6034888Type Order no.Order information
Fork width 3 mmMinimum detectable object size 1)
Gap between labels 2 mmSize of labels 2 mm
Supply voltage VS 10 ... 30 V DC 2)
Current consumption 3) 40 mARipple (at 10 mA) 4) < 1 VSwitching output PNP and NPN Light/dark adjustable via buttonSignal voltage
PNP HIGH = UV – (< 2 V)/LOW = 0 VNPN HIGH = UV/LOW = < 2 V
Output current IA 100 mACapacitive load 200 nFResponse time 5) 300 μsInitialisation time 100 msVDE protection class 6) IIIEnclosure rating IP 65Circuit protection 7) B, CShort-circuit protection ✔
Ambient temperature Operation +5 °C ... +55 °C Storage –30 °C ... +70 °COperating principle: fork Ultrasonic detection principleAir movement 5 m/sec. max. wind speedConnection type M8, 4-pinAdjustment option “+”, “–” adjustment via buttonHousing AluminiumWeight 95 g
1) Depends on the label thickness2) Limit values, reverse-polarity protected3) Without load4) At 10 mA
5) For 1:1 light/dark ratio, typical, dependent on material and speed
6) Reference voltage 50 V DC
7) B = Outputs short-circuit protected C = Interference pulse suppression
Technical data UF 3-70B410
Notes
Leg can be removed for cleaning.
4 SENSICK 2007-08-31
Description Sensitivity setting
Description Switching point adjustment
If necessary, adjust the switching point slightly in the other direction.
Adjustment of the switching point in “light-switching” mode: switching output Q is active if the carrier material is detected between the labels (gap detection).
Position label between the active surface of the fork sensor (see arrow on sensor). Adjust with “–”‚ or “+” until the switching output indicator is safely off.
Notes
Sensitivity setting
+
– Slow setting: Press “+” or “–” button once, LED (red) lights with each button hitFast setting: Press “+” or “–” button permanently, LED (red) flashes after 2 seconds.
– 6s
Light-/dark-switchingPress “+” and “–” buttons simultaneously for 6 seconds, LED (yellow) changes status, and the LED (red) flashes slowly. Release “+” and “–” buttons.
– 3s
Locking the buttons
Press “+” and “–” buttons simultaneously for 3 seconds, button lock is enabled/disabled.
Locking the buttons:The red LED goes off after 3 seconds,release “+” and “–” buttons,LED (red) lights permanently.
Unlocking the buttons:The red LED lights after 3 seconds,release “+” and “–” buttons,LED (red) extinguishes.
redyellow
+
–
redyellow
redyellow
+
–
Feed through the material for scanning, flutter-free
Move the material to be detected under tension and flutter-free.
Position carrier material in the active area of the fork sensor. The switching output indicator (yellow) must light up again; if this is not the case, increase sensitivity with the “+” button until the switching threshold is correctly adjusted.
2007-08-31 SENSICK 5
DOL-0804-W10M 6010755 10 mDOL-0804-W05M 6009873 5 m
TypeDOL-0804-W02M
Order no.6009871
Cable length 2 m
DOL-0804-G10M 6010754 10 mDOL-0804-G05M 6009872 5 m
TypeDOL-0804-G02M
Sample applications and connection systems
Order no.6009870
Cable length 2 m
Female connector M8, 4-pin, straightCable diameter 5 mm, 4 x 0,25 mm2, cable PVC
Female connector M8, 4-pin, angledCable diameter 5 mm, 4 x 0,25 mm2, cable PVC
2/wht 1/brn
4/blk 3/bluø 1
0
30.5
Rmin1)
M 8
x1 3/blu
626
M 8x1
16
.5
ø 10
Rmin1)
1/brn
4/blk
2/wht
1) Minimum bend radius in dynamic useRmin = 20 x cable diameter
Sample applications
The UF ultrasonic fork sensor reliably detects the labels on the carrier material, irrespective of the printing of the labels or of the carrier material.
Transparent carrier material.
Transparent printed label.
Label detection
The UF ultrasonic fork sensor reliably distinguishes between one and two sheet(s) of paper.
Double-sheet detection
The UF ultrasonic fork sensor reliably detects the splice. This foil area can be detected within the process.
Splice detection
SICK AG | Waldkirch | Germany | www.sick.com
8012
415/
2007
-08-
31 ∙
GO/
KE ∙
Prin
ted
in G
erm
any
(200
7-12
) ∙ S
ubje
ct to
cha
nge
with
out n
otic
e ∙ T
he s
peci
fied
prod
uct f
eatu
res
and
tech
nica
l dat
a do
not
repr
esen
t any
gua
rant
ee ∙
01 A
4 4c
int3
0 AustraliaPhone +61 3 9497 4100 1800 33 48 02 – tollfreeE-Mail [email protected]
Belgium/LuxembourgPhone +32 (0)2 466 55 66E-Mail [email protected]
BrasilPhone +55 11 3215-4900E-Mail [email protected]
Ceská RepublikaPhone +420 2 57 91 18 50E-Mail [email protected]
ChinaPhone +852-2763 6966E-Mail [email protected]
DanmarkPhone +45 45 82 64 00E-Mail [email protected]
DeutschlandPhone +49 211 5301-250E-Mail [email protected]
EspañaPhone +34 93 480 31 00E-Mail [email protected]
FrancePhone +33 1 64 62 35 00E-Mail [email protected]
Great BritainPhone +44 (0)1727 831121E-Mail [email protected]
IndiaPhone +91–22–2822 7084E-Mail [email protected]
ItaliaPhone +39 02 27 43 41E-Mail [email protected]
JapanPhone +81 (0)3 3358 1341E-Mail [email protected]
NederlandsPhone +31 (0)30 229 25 44E-Mail [email protected]
Norge Phone +47 67 81 50 00E-Mail [email protected]
ÖsterreichPhone +43 (0)22 36 62 28 8-0E-Mail [email protected]
PolskaPhone +48 22 837 40 50E-Mail [email protected]
Republic of KoreaPhone +82-2 786 6321/4E-Mail [email protected]
Republika SlowenijaPhone +386 (0)1-47 69 990E-Mail [email protected]
RomâniaPhone +40 356 171 120 E-Mail [email protected]
RussiaPhone +7 495 775 05 34E-Mail denis.kesaev@sick- automation.ru
SchweizPhone +41 41 619 29 39E-Mail [email protected]
SingaporePhone +65 6744 3732E-Mail [email protected]
SuomiPhone +358-9-25 15 800E-Mail [email protected]
SverigePhone +46 10 110 10 00E-Mail [email protected]
TaiwanPhone +886 2 2365-6292E-Mail [email protected]
TürkiyePhone +90 216 587 74 00E-Mail [email protected]
USA/Canada/MéxicoPhone +1(952) 941-6780 1 800-325-7425 – tollfreeE-Mail [email protected]
More representatives and agencies in all major industrial nations at www.sick.com