u-blox products catalog16

Product Catalog 16Wireless & Positioning Solutions 2015

locate, communicate, accelerate

Dear readers,

We are doing business in one of the most dynamic and fastest growing industries that exists today. The “internet of people” has already changed virtually every aspect of our lives: how we communicate, shop, educate, inform and entertain ourselves. The next growth phase of the internet has a name – the “Internet of Things”, or “IoT”. It is growing fast and will ultimately connect billions of devices with each other. There will soon be more machines connected to the internet than people.

The IoT is already streamlining and lowering the cost of business processes and logistics, increasing safety, security and convenience, and improving the healthcare of millions of people. At the root of the IoT are connected devices exchanging vital information with each other, and with powerful applications in the cloud.

As most end devices such as meters, sensors, security, healthcare and vehicle-mounted electronics are distributed over large areas and in high numbers, long-distance and short-range wireless communications are necessary to bind devices together in the IoT. This is why we have expanded our product portfolio to include Bluetooth and Wi-Fi modules in addition to our complete line of 2G, 3G and 4G cellular modules. We are very pleased to offer you new options for connectivity all the way down to the last-meter. Refer to our new section on Short Range Radio products in this catalog.

Location continues to be a crucial piece of information for both people and things in our increasingly mobile society. Location makes information significantly more valuable, and better targeted at the needs of the end-user. u-blox continues to improve the positioning technology, and we are proud to offer you our latest multi-GNSS positioning products with concurrent operation, including important features like integrated antenna, 3D dead reckoning and indoor positioning options, all based on our 8th generation positioning platform, u-blox M8.

Finally, I would like to introduce our customers to a new concept of “Product Grades” – Automotive, Professional and Standard. This color-coded classification groups our products into three distinct product grades to make it easier to match the appropriate module or chip with your designs. We realize that when it comes to component selection, the right features are not enough – our products must also fulfil the precise quality requirements of your application, while meeting your budget constraints. See the Quality section of this catalog for details.

We look forward to helping you launch your next generation of products for the IoT!

Thomas SeilerCEO u-blox

Thomas Seiler – CEO u-blox

| Editorial

Contents |

Contents

4 Company 4 u-blox at a glance 5 Product grade strategy

6 Quality 7 Product grades 8 Product design 8 u-blox quality system 10 Zero defect policy 11 Supply reliability

12 Markets and application sectors 13 Automotive 14 Industrial 15 Consumer

16 Products

19 Overview Cellular 20 2G: GSM/GPRS 24 3G: UMTS/HSPA(+), CDMA 34 4G: LTE 43 Overview Short Range Radio modules 44 Bluetooth: classic and low energy 50 Multiradio: Bluetooth/Wi-Fi 59 Overview Positioning modules 60 Standalone positioning: modules and antenna modules 78 Time and frequency 82 Dead Reckoning 84 Precise positioning

89 Overview Positioning chips 90 Standalone positioning 94 Dead Reckoning 96 Time and frequency

100 Services 101 Services overview 102 Assisted GNSS 104 CellLocate®

106 Support 107 Support overview 108 Evaluation kits, sofware and reference designs 110 u-center 111 m-center 112 Android solution / u-center Android 113 RIL software for wireless modules

114 Technology 115 Technology overview 116 u-blox’ module roadmap philosophy 117 Cellular module layout compatibility 118 LTE 119 u-blox M8 and u-blox 7 120 Bluetooth technology 121 Wi-Fi technology 122 Automotive Dead Reckoning 123 GNSS antenna modules 124 Precise Point Positioning (PPP) 125 Precision Timing and Frequency Reference

126 Contacts & worldwide presence

QU

ALI

TYC

ELLU

LAR

SHO

RT

RA

NG

EPO

SITI

ON

ING

SER

VIC

ESSU

PPO

RT

TEC

HN

OLO

GY

Foundation Founded in 1997, Switzerland

Stock exchange listing Listed on the SIX Swiss Exchange (UBXN)

Employees Over 500

Sales 2013 revenue of CHF 219.8 million (approximately USD 247 million)

H1 2014 revenue of CHF 121.6 million (approximately USD 140 million)

Markets served Automotive, industrial and consumer

Market penetration More than 4‘000 customers worldwide benefit from our solutions

More than 10‘000 types of devices rely on our products

More than 100‘000‘000 people and machines utilize our technology

Key facts

Company

| Company

u-blox at a glanceSwiss-based u-blox (SIX:UBXN) is a leading provider of wireless and positioning semicon-ductors and modules for the automotive, industrial and consumer markets. Our solu-tions enable people, vehicles and machines to locate their exact position and wirelessly communicate via voice, text or video. With a broad portfolio of chips, modules and software solutions, u-blox is uniquely positioned to allow OEMs to develop innovative solutions that enable mobility quickly and cost-effectively.

Global presenceOur direct presence in 17 countries ensures that we can react quickly to changing customer demands. It also puts us in a very strong position to share knowledge and market requirements with our customers.

With our staff of over 500 people worldwide, we support our customers from compo-nent evaluation and selection right through to product design, final production set-up, logistics and after-sales support.

With headquarters in Thalwil, Switzerland, u-blox is globally present with offices and R&D centers in Europe, Asia and the USA.

Company |

Product grade strategy

u-blox excels at the ability to offer customers an attractive choice of chips and modules with advanced and scalable functionality, high quality, easy upgradability and ever de-creasing size and power consumption. These are crucial factors for our customers to lead in their markets.

Keeping costs to a minimum is equally important. Designers need a product that meets their technical requirements, while staying within their manufacturing budget.

That is why u-blox now offers its products in grades that are optimized for our three primary market sectors: automotive, industrial and consumer. These new color-coded categories give customers an instant overview of which applications each product is best suited for.

• In cost-sensitive consumer products used in the home or kept in a pocket, our Standard Grade products are the most cost-efficient solution.

• For after-market vehicle mounted devices and industrial products such as fleet management systems, smart meters, robots, and security systems, we offer our Professional Grade products.

• When designing sophisticated first-mount vehicle applications where high-end features and tolerance to environmental stress are the highest priorities, we offer our Automotive Grade products.

Often we may offer a product in multiple categories.

u-blox invites customers to discuss all their requirements including features, product grade, price, support and innovation roadmap. u-blox believes in an open and forward-looking dialogue with customers that identifies all their product requirements, not only for today, but for future product generations.

| Quality

Quality

Page 6 | Quality

Quality |

QU

ALI

TY

u-blox delivers products in three distinct product grades optimized for the specific needs of our customers:

Product grades

Quality | Page 7

Standard Grade

For consumer product applications where environmental conditions such as temperature, EMC and mechanical stresses are within light to moderate levels. Ideally suited to higher volume, price sensitive applications such as recreational devices, mobile computing, cameras, displays, routers, and test equipment.

This category of products is characterized by an excellent price to performance ratio and the industry renowned u-blox quality.

Professional Grade

For use in industrial and professional applications, where operating temperature range and mechanical durability are important for high reliability over the entire product service life.

This product category is suited for applications like industrial equipment, safety and alarm systems, broadcast, and telecom equipment, asset tracking, fleet managements, etc.

These products are very robust electrically as well as mechanically. They are qualified according to JEDEC / ISO 16750 to ensure best in class quality.

Automotive Grade

For equipment in harsh environ-mental conditions, especially auto-motive applications, where the device is subjected to high levels of EMI, bump, shock and vibration, and extremes of temperature. These products are designed for use in automotive, transportation and other mission critical applications and meet industry standard automotive specifications and are qualified strictly according to ISO 16750 / AEC-Q100.

u-blox’ automotive products feature excellent immunity to severe mechanical and electrical stress. They are characterized by lowest possible field failure rate, have the long term product availability to support the automotive industry’s product life cycles and come with automotive quality processes (PPAP, 8D, Failure Analysis).

Tolerance to environmental stressDesigned and tested for consumer Designed and tested for industrial Designed and tested for industrialenvironment environment environment

Typ. ambient temperature range–20 … +65°C –40 … +85°C –40 … +85°C

QualificationJESD47 (chips) JESD47 (chips) AEC-Q100 (chips) Subset of ISO 16750 (modules) ISO 16750 (modules) ISO 16750 (modules)

Process levels for design, manufacturing and testing100% outgoing test, Standard grade, plus Professional grade, plus PPAP, 8D,product traceability x-ray testing of modules, ISO/TS 16949, automotive test flow, top-class components component traceability, select automotive grade components

Field failure rateLow Low According to ppm agreement

| Quality

Product design

A defining difference between u-blox and its close competitors lies in the company’s core competency: u-blox is a cutting-edge semiconductor company with in-house IC design, test and quality operations. Many module vendors focus on packaging 3rd party chips into a module form factor, with no IC design know-how, or in-house control over the software stack. This fundamental difference means u-blox is in full control of its own product roadmap, features, quality and costs because we integrate our IP into our chips, including the software stack.

u-blox’ sophisticated design flow adheres to state-of-the-art product development processes:

• Requirements management by structured tracing of requirements from our global market access and deep relationships with customers.

• Technology development for new key features and continual enhancement of features and functionality.

• Frequent review of product development program assures efficient use of R&D resources for successful products.

• Structure product life cycle process assures a stage by stage development of a product, with defined qualification criteria at each stage.

• Simulation and Characterization of all semiconductor designs to insure compliancy with functionality and performance.

• Risk management as standard procedure for all product development projects for minimizing time delays.

• Chip design for test and assembly to maximize quality and yield.

• Failure Modes and Effects Analysis (FMEA): Early identification of potential failures to determine actions to increase detection and reduce occurrence.

• Design verification before tape-out through simulation and integrity testing.

• Built-in Self Test (BIST) to accelerate testing of complex System-on-Chip designs, increase coverage and lower testing costs.

• Environmental stress tests: u-blox has invested millions in in-house testing equipment to simulate years of product operation in the field and identify causes of failure mechanisms.

• Testing of firmware fully automated hardware-in-the-loop continuous integration.

Customers can depend on u-blox for high-quality, cost-effective, reliable chip and modules with full confidence that the entire product definition, production, test and quality processes are under u-blox control.

QU

ALI

TY

u-blox has earned an industry-wide reputation as a best-in-class vendor of high-quality, reliable integrated circuits (ICs) and modules for the Automotive, Industrial and Consumer markets. We have achieved this distinction through a systematic, multi-pronged approach that emphasizes quality at every phase of our product’s life cycle. This encompasses product development, prototyping, qualification, manufacturing and delivery.

u-blox quality philosophy is supported by 5 main pillars:

• Understand and fulfill our customers’ needs We strive to understand our customers’ evolving

design and quality requirements, and keep pace with their innovation cycles.

• Continuous improvement We continuously improve our quality, product

features, and cost-efficiency through cutting-edge design innovation, expansion and acquisition of know-how.

• World-class partners u-blox operates as a fabless IC and module design-

house, utilizing high-volume, state-of-the-art fabrication and packaging partners that adhere to the highest manufacturing standards.

• Committed employees u-blox‘ leading technology, quality and reliability

depends on our corporate environment that fosters teamwork, enthusiasm and dedication of our employees.

• Environmental and social commitment u-blox is committed to environmental excellence

and meeting or exceeding regulatory requirements with respect to the use of hazardous substances (e.g. RoHS, ELV, REACH compliancy etc.). All of our contract manufacturers are ISO 14001 certified. u-blox is also a signatory to the UN Global Compact meaning we comply with sustainable production, environmental friendliness as well as with human-rights and anti-corruption principles.

Our global quality program covers all aspects of our organization including R&D, module and IC manufacturing, testing, supply chain, and ultimately timely delivery to our global customers. The program spans a multi-continent manufacturing chain that includes semiconductor fabrication and assembly in Asia, module assembly in Europe and Asia and independent stock points in America, Europe and Asia.

We adhere to the industry’s strictest standards. Our design-centers and manufacturing sites are dedicated to ISO/TS 16949, ISO 9001, ISO 14001 and ISO/IEC 80079-34 quality standards.

We are an established automotive supplier. u-blox has been a preferred vendor to the global automotive markets for many years, supplying key electronic components to many of the world’s most prestigious car brands. To achieve this distinction, all our manufacturing sites are ISO/TS 16949 automotive certified.

• Our modules are ISO 16750 qualified and Automotive End of Life (ELV) compliant.

• Our automotive ICs are JESD47 and AEC-Q100 qualified.

• We are committed to meet automotive service levels as required by our customers.

u-blox quality system

| Quality

We work exclusively with world-class semiconductor fabri-cation partners that use the most reliable technologies to manufacture our chips. Our collaborative approach creates synergies, leveraging our product know-how and our partners’ manufacturing expertise. This allows us to optimize our design, test and manufacturing processes in line with our zero defect strategy.

Our in-house team of highly-specialized Test and Production Engineers develop and verify all chip and module tests in-house before installation at mass-production assembly and testing facilities.

Our chip production process includes 100% wafer sorting, packaging, as well as 100% final testing. Our automotive-grade integrated circuits (ICs) are qualified according to AEC-Q100, the automotive standard that includes the requirements of the common JEDEC standard JESD47 for ICs.

Qualification tests are performed at our laboratory facilities following the zero defects flow for automotive grade semiconductors (see diagram on following page).

Zero defects flow diagram

Design

• Requirement Management• DFMEA• Simulation• Characterization• Design for Test / Assembly• BIST

• Wafer level reliability monitoring• Process / Product improvement• Product reliability monitoring

IMPROvEMEnT

• Problem solving techniques• Failure analysis process

ISSUE RESOLUTIOn

• Statistical data analysis• Environmental stress tests• Physical failure analysis

CAPABILITYManufacturing

• Process selection and qualification• Corner lot evaluation• Process FMEA• Control plan / Safe launch plan• SPC / Process capabilities• Product qualification

Test

• Test program development• Parametric and final testing • ATE capability studies (MSA)• Statistical yield analysis• Extended temperature testing• 100% burn-in for automotive products

Application

• Design-In support• Schematics review• Support for key component selection• Assembly process support• Test procedures support

Zero defect policy

Quality |

Packaging and deliveryu-blox delivers chips and modules packed into reels which are, in turn, packed into ESD (Electrostatic Sensitive Device) and moisture-shielding bags. Sample deliveries are packed onto trays and are also packaged into ESD and moisture-shielding bags.

Products are delivered on reels that are dry-sealed into ESD and moisture-shielding bags that come with detailed care instructions about moisture sensitivity levels and maximum factory floor times.

For Europe, Middle East, Africa and Asia Pacific regions, samples of modules are shipped from our headquarters in Switzerland or assembly center in Austria and chip-sets are sent from the Philippines. For the Americas, all shipments, regardless of quantity, are sent from our US headquarters in Reston, Virginia, USA.

Samples and pre-production quantities can be purchased directly from our Online shop:

www.u-blox.com/en/online-shop.html

u-blox: a reliable supplierManufacturing quality products is only half the game. Delivering the right product in the right quantity at the required time is crucial for our customer’s success. That is why we go to extreme measures to ensure that our products get to our customers when they need them.

We achieve this through multiple safety measures:

• We perform long-term capacity planning for modules and ICs 12 months into the future.

• Short term “Just-in-time” delivery planning for modules is performed weekly.

To make sure that all subcomponents for our products are available on time, our safety stock concept includes:

• 6 weeks safety stock of finished products at three different inventory locations.

• 2 month safety stock for all components.

• 1 month safety stock of wafers.

• Long-term committed production capacity from our contract manufacturers.

Our benefits:• Excellent service level:

our target is 98.5% of all delivery requests met

• Very short delivery lead time

• Flexible, responsive delivery for small, medium and high capacity requirements

• Total customer satisfaction

Supply reliability

http://www.u-blox.com/en/online-shop.html

| Markets

Markets and application sectors

Markets |

Automotive

Positioning & wireless communications are at the heart of new in-vehicle servicesNavigation is a standard feature in most cars of today. But getting drivers to where they want to go is just the beginning. u-blox’ robust positioning and wireless com-ponents allow designers to put a whole new array of helpful and entertaining features as well as critical emergency services at the driver’s fingertips. Features such as an automated trip advisor that instantly downloads details about the driver’s sur-roundings to inform of live traffic and parking conditions, special attractions, hotels, service stations and restaurants along the route. Assistance can automatically be summoned in the event of an accident, emergency or breakdown, through built in eCall/ERA-GLONASS functions or any proprietary service.

Insurance, vehicle recovery and automotive “black-box” based on GNSS positioningThe ability to recover stolen vehicles is becoming a hot global issue. u-blox’ ultra small, yet highly sensitive positioning solutions combined with wireless connectiv-ity provide the perfect solution to this growing problem. Additionally, in-vehicle positioning can also be used to record location, speeds, and acceleration for use in insurance telematics applications that may dramatically reduce the insurance costs of drivers and reduce fraud.

Professional

Automotive

Recommended product grade

| Markets

Industrial

Machine-to-machine communications (M2M)Our GSM, UMTS, CDMA and LTE modules support a diverse range of machine-to- machine applications such as remote industrial automation, mobile monitoring and control for health services, smart energy management and automatic meter reading. u-blox comprehensive cellular product portfolio includes solutions for wireless security systems, POS terminals and vending equipment monitoring. Our 3G and 4G modems support high-bandwidth applications such as car infotainment systems and mobile computing devices where high-speed wireless internet connection is essential.

Fleet management and asset trackingKeeping accurate track of valuable assets via satellite positioning and wireless connec-tivity streamlines your supply chain. Whether for fleet management, vehicle recovery, locating people or shipments, u-blox has the right embedded solutions that combine high-sensitivity, small size and low power consumption with industrial temperature range. u-blox’ asset tracking solutions let you combine satellite positioning with the power to communicate over the world’s largest 2G, 3G and 4G networks.

Precision TimingOur GNSS technology provides a precision reference clock accurate to 15 billionth of a second to support time-critical applications such as synchronization of distributed computer systems, mobile base-stations and femtocells.

Standard

Professional

Automotive


Markets |

Consumer

Location awarenessEmbedded in navigation systems, mobile phones, cameras, tablets, notebooks and recreational devices, our positioning and wireless components enable devices to guide you to your destination, find your friends, your car, useful services and points of inter-est that are relevant to where you are, and where you are going.

Portable positioning and wireless for safety and recreationOur products are used in a growing range of handheld tracking and recreational devices such as child and pet locators, golf range-finder, jogging, marine and fishing equipment. Whether for fun or for safety, u-blox’ highly-integrated, ultra-sensitive positioning and wireless modules, chipsets, and services enable consumer devices to keep you aware of the world around you, no matter where you are. Our wireless modules also allow cost-effective, high-speed mobile connection to the internet.

Standard

Professional


Products

| Products

Products |

Overview

Embedded products for wireless communications and global positioning Our market-proven products can be found in demanding automotive and industrial applications, as well as in mobile and handheld consumer devices where size and power consumption are critical.

Combining industry-leading robustness, sensitivity, quality and performance with innovative features and packaging, u-blox offers the right products, software and solutions to suit your designs.

Cellular modules (Page 18)

GSM/GPRS modules: 2.5G voice and data modules

UMTS/HSPA(+) modules: 3 – 3.75G voice and data modules

CDMA modules: CDMA2000 voice and data modules

LTE modules: 4G voice and/or data modules

Short range modules (Page 42)

Bluetooth: Classic and low energy

Multiradio modules: Bluetooth/Wi-Fi

Positioning modules (Page 58)

Standalone positioning modules: single and concurrent GNSS receiver modules

GNSS antenna modules: single and concurrent GNSS receiver modules with integrated antenna

Timing and raw data modules: precision time and reference frequency modules

Dead Reckoning modules: GNSS receiver modules with integrated Automotive Dead Reckoning

Precise positioning modules: GNSS receiver modules with Precise Point Positioning (PPP)

Positioning chips (Page 88)

Standalone GNSS chips: single and concurrent GNSS receiver chips

Dead Reckoning chips: GNSS receiver chips with integrated Automotive Dead Reckoning

Positioning antennas (Page 98)

Active external GPS antenna

Standard

AutomotiveProfessional

Cellular modules

| Products

Cellular modules |

CEL

LULA

R

LISA UMTS/HSPA(+) and CDMA modules22.4 x 33.2 x 2.6 mm

TOBY LTE modules24.8 x 35.6 x 2.6 mm

SARA GSM/GPRS modules16.0 x 26.0 x 3.0 mm

LTE and CDMA Mini PCIe modules30.0 x 51.0 x 3.7 mm

Model Bands Interfaces Audio Features

GSM

/GPR

S

UM

TS/H

SPA

CD

MA

LTE

Band

dat

a ra

tes

UA

RT

SPI

USB

SDIO

(Mas

ter)

GPI

O

Ana

log

audi

o

Dig

ital a

udio

Net

wor

k in

dica

tion

Ant

enna

sup

ervi

sor

Jam

min

g de

tect

ion

Embe

dded

TC

P, U

DP/

IP

Embe

ded

FTP/

HTT

P

Embe

dded

SSL

Inte

grat

ed G

NSS

Cel

lLoc

ate

Firm

war

e up

date

via

ser

ial

eCal

l / E

RA-G

LON

ASS

Rx d

iver

sity

Dua

l sta

ck IP

v4/I

Pv6

MIM

O 2

x2

Stan

dar

d

Pro

fess

ion

al

Au

tom

oti

ve

Pag

e

GSM/GPRS modules

SARA-G300 D1 2 • 20

SARA-G310 Q 2 • 20

SARA-G340 D1 2 4 1 1 • • • • • • • • • • 20

SARA-G350 Q 2 4 1 1 • • • • • • • • • • 20SARA-G350ATEX

Q 2 4 1 1 • • • • • • • • • 20

LEON-G100 Q 1 4 2 1 • • • • • • • • • 22

UMTS/HSPA modules

SARA-U260 D2 850/1900 L 1 1 9 1 • • • • • • • • • • 24

SARA-U270 D1 900/2100 L 1 1 9 1 • • • • • • • • • • • 24

SARA-U280 850/1900 L 1 1 9 1 • • • • • • • • • • 24

LISA-U200JK Q800/850/900

1700/1900/2100L 1 1 1 14 2 • • • • • • • • • • • 26

LISA-U230 Q800/850/900

1700/1900/2100M 1 1 1 14 2 • • • • • • • • • • • 26

LISA-U260 Q 850/1900 L 1 1 1 14 2 • • • • • • • • • 26

LISA-U270J Q 900/2100 L 1 1 1 14 2 • • • • • • • • • • 26

CDMA modules

LISA-C200 800/1900 R 1 1 5 1 1 • • • • A • U 28

LISA-C210 450 R 1 1 5 1 1 • • • • • U 30

FW2770p(PCI-D100)

800/1900 E 1 • • • 32

FW2770p(PCI-D101)

800/1900 E 1 • • • 32

LTE modules

TOBY-L100 4,13 T1 1 6 • U • • • 34

TOBY-L200 Q850/900/AWS

1900/21002,4,5,7,17

T2 1 1 1 10 1 • • • • • • • • • • • • • 36

TOBY-L201 Q800/850

1900/21002.4.,5,7,8,20

T2 1 1 1 10 1 • • • • • • • • • • • • 36

TOBY-L210 Q850/900

1900/21001,3,5,7,8,20

T2 1 1 1 10 1 • • • • • • • • • • • • • 36

TOBY-L280 Q850/900

21001,3,5,7,8,28

T2 1 1 1 10 1 • • • • • • • • • • • • 36

MPCI-L100 4,13 T1 1 • U • • • 38

MPCI-L200 Q850/900/AWS

1900/21002,4,5,7,17

T2 1 1 • • • • • • • • • • • • • 40

MPCI-L210 Q850/900

1900/21001,3,5,7,8,20

T2 1 1 • • • • • • • • • • • • • 40

For previous generation cellular modules, see page 87.

T1 = LTE Cat.3 (100 Mb/s down, 50 Mb/s up)T2 = LTE Cat.4 (150 Mb/s down, 50 Mb/s up)D1 = Dual-band 900/1800 MHzD2 = Dual-band 850/1900 MHzJ = Version for Japan available (DoCoMo, Softbank)

R = 1xRTT (153 kb/s down and up)E = EV-DO (3.1 Mb/s down, 1.8 Mb/s up)L = 7.2 / 5.76 Mb/s down and upM = 21.1 / 5.76 Mb/s down and up

Q = Quad-bandK = Version for Korea available (SKT)

A = Available from versions 03S/23S onwardsU = via USB only

Overview Standard Professional Automotive

SARA-G3 series GSM/GPRS modules

| GSM/GPRS modules

Highlights• GSM/GPRS functionality scalable to customer needs• Seamless drop-in migration from SARA-U UMTS/HSPA modules• Smallest footprint; lowest standby current: < 0.90 mA• Extended temperature range: –40°C to +85°C• Simple integration of u-blox GNSS and A-GNSS• CellLocate®: location based on cellular network• Manufactured in ISO/TS 16949 certified production sites

SARA-G3 series16.0 x 26.0 x 3.0 mm

Product descriptionThe SARA-G3 series of GSM/GPRS modules feature extremely low power consumption and a miniature LGA form factor. SARA-G3 modules are interchangeable, and have been designed with the diverse needs of M2M customersin mind. Different functionalities and feature sets are avail-able to meet different customer and application requirements.

SARA-G350 and SARA-G340 are full-feature GSM/GPRS modules with a comprehensive feature set, including an extensive set of internet protocols (TCP, UDP, HTTP and FTP). They have fully integrated access to u-blox GNSS position-ing chips and modules, along with embedded A-GNSS (AssistNow Online and AssistNow Offline) functionality. SARA-G350 is the quad-band version for global connectivity and SARA-G340 (900/1800 MHz) is the dual-band version for cost optimized use in Europe and Asia. Their rich feature set enables customers to easily develop a wide range of M2M devices with minimum software development on the host processor.

SARA-G300/G310 modules target high volume, cost sensitive applications, and provide “bit pipe” GSM/GPRS functionalities while minimizing the customer’s total cost of ownership. Functionalities requiring dedicated and expensive hardware components are eliminated where they are not needed or can be implemented in the host processor.

The SARA-G350 ATEX is an ATEX / IECEx certified variant that further complements the product family by offering the ideal solution for the development of smart devices deployed in potentially explosive environments.

u-blox cellular modules are certified and approved by the main regulatory bodies and operators. RIL software for An-droid and Embed ded Windows are available free of charge. SARA-G3 modules are manufactured in ISO/TS 16949 certi-fied sites. Each module is tested and inspected during pro-duction. The modules are qualified according to ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.

A = available upon request V = available from version 01S onwards

Product selector

Model Bands Interface Audio Features Grade

GSM

/GPR

S qu

ad-b

and

GSM

/GPR

S du

al-b

and

(900

/180

0 M

Hz)

UA

RT

SPI

USB

GPI

O

DD

C f

or u

-blo

x G

NSS

Ana

log

Aud

io

Dig

ital A

udio

Net

wor

k in

dica

tion

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

FTP

, H

TTP,

SM

TPEm

bedd

ed S

SL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

ase

rial i

nter

face

eCal

l/ERA

-GLO

NA

SS

Rx d

iver

sity

GN

SS v

ia M

odem

Stan

dard

Prof

essi

onal

Aut

omot

ive

SARA-G300 • 2 •

SARA-G310 • 2 •

SARA-G340 • 2 4 1 • • • • • • • V • • • • •

SARA-G350 • 2 4 1 • • • • • • • V • • A • • •

SARA-G350ATEX • 2 4 1 • • • • • • • • • • • •

Standard Professional Automotive

GSM/GPRS modules |

Features

Electrical data

Power supply 3.00 V to 4.50 V (extended)

Power Power Off: < 40 μA consumption Idle mode4: < 0.9 mA Idle mode5: < 5.0 mA Connected: < 250 mA

4 SARA-G300 and SARA-G310: requires external 32 kHz signal5 SARA-G300 and SARA-G310: without external 32 kHz signal

Interfaces

Common to all modules:

Antenna 50 SMT pad

Serial Port 1 UART for data and AT Commands 1 UART for tracing and firmware update

SIM 1.8 V and 3 V

SARA-G340/G350 only:

GPIO 4, controllable over AT commands

GNSS serial 1 DDC (I2C)

Audio 1 analog 1 digital (I2S/PCM)

GSM GSM 850/900/1800/1900 MHz 1

GSM 900 /1800 MHz 2

3GPP Release 99

GPRS GPRS Class 10, CS1-CS4 - up to 85.6 kb/s PBCCH support

CSD GSM max 9.6 kb/s

AT Commands 3GPP 27.005, 3GPP 27.007 u-blox AT command extension 3GPP 27.010 MUX protocol

SMS MT/MO Text/PDU mode

FW upgrade Via UART

SARA-G340/G350 only: Voice HR / FR / EFR / AMR Echo cancellation Noise reduction

Protocols Embedded TCP/IP, UDP/IP, HTTP/FTP, HTTPs & FTPs

Network Jamming detection

GNSS Direct access to u-blox GNSS via module Interfaces AssistNow software for faster acquisition CellLocate® & Hybrid Positioning

Special inBand modem features eCall and ERA/GLONASS support

1 SARA-G310/G3502 SARA-G300/G340

Certifications and approvals

SARA modules offer a comprehensive set of regulatory certifications and approvals, including R&TTE, GCF, PTCRB, FCC, IC, NCC, ICASA, and Anatel. See the u-blox website for latest approvals.

Ordering information

See datasheet Samples available via u-blox’ Online shop atwww.u-blox.com/en/online-shop.html

Support product

EVK-G35 Evaluation kit for SARA-G340/G350

EVK-G31 Evaluation kit for SARA-G300/G310

RIL software Android 2.3 and 4.x Embedded Windows 6.x, 7.x

Environmental data, quality & reliability

Operating temperature –40 to +85°C (extended range)

RoHS compliant (lead-free)

Qualification according to ISO 16750

Manufactured in ISO/TS 16949 certified production sites

ATEX / IECEx certification (SARA-G350 ATEX)

96 pin LGA: 16.0 x 26.0 x 3.0 mm, < 5 g

Package

CEL

LULA

R

Standard


LEON-G1 series GSM/GPRS modules

| GSM/GPRS modules

Highlights• Full feature quad-band GSM/GPRS, class 10

• Easy forward migration to u-blox LISA UMTS/HSPA and CDMA 1xRTT modules

• Lowest standby current: < 0.99 mA

• Extended temperature range: –40°C to +85°C

• Simple integration of u-blox GNSS and A-GNSS

• CellLocate®: location based on cellular network

• ISO 16750 qualification

• Manufactured in ISO/TS 16949 certified production sites

LEON-G10018.9 x 29.5 x 3.0 mm

Product descriptionLEON-G1 modules provide full feature quad-band GSM/GPRS data and voice communication in a compact and cost optimized SMT form factor. LEON modules are fully qualified and certified and feature extremely low power consumption and a rich set of internet protocols. They are ideally suited to M2M and automotive appli-cations such as: Fleet management, Automatic Meter Reading (AMR), people and asset tracking, surveillance and security and Point of Sales (PoS) terminals.

LEON modules implement fully integrated access to u-blox GNSS receivers. Cellular and GNSS functions are controlled through a single serial port from any host processor, and A-GNSS (AssistNow Online and AssistNow Offline) functionality is integrated.

Product selector

The compact SMT package enables easy manufactur-ing, and simple forward migration to u-blox LISA UMTS/HSPA and CDMA 1xRTT modules and seamless GSM to UMTS and GSM to CDMA handover. This allows customers to take maximum advantage of their hard-ware and software investments, and provides very short time to market. An extensive set of national regulatory and operator certificates is available. RIL software for Android and Embedded Windows is available free of charge.

LEON modules are manufactured in ISO/TS 16949 certified sites. Each module is tested and inspected during production. The modules are qualified according to ISO16750 standard: “Road vehicles – Environmen-tal conditions and testing for electrical and electronic equipment”.

Model Bands Interface Audio Features Grade

GSM

/GPR

S qu

ad-b

and

UA

RT

SPI

USB

GPI

O

DD

C f

or u

-blo

x G

NSS

Ana

log

Aud

io

Dig

ital A

udio

Net

wor

k in

dica

tion

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

FTP

, HTT

P, S

MTP

Embe

dded

SSL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

a se

rial i

nter

face

eCal

l / E

RA-G

LON

ASS

Rx d

iver

sity

GN

SS v

ia M

odem

Stan

dard

Prof

essi

onal

Aut

omot

ive

LEON-G100 • 1 4 1 2 1 • • • • • • • • e •

e = with LEON-G100-71S


GSM/GPRS modules |

Features

Electrical data

Power supply 3.0 V – 4.50 V (extended range)

Power Power Off: < 90 μAconsumption Idle mode1: DRX9: < 0.99 mA DRX5: < 1.60 mA GSM Voice: < 300 mA GPRS Class 10: < 410 mA1 GSM and GPRS attach

Interfaces

Antenna 50 Antenna detection

Serial port 1 UART 1 DDC (I2C) for GNSS communication

Audio lines 2 audio analog 1 audio digital (I2S/PCM) interface

SIM 1.8 V and 3.0 V

GPIO 4, controllable over AT commands

RTC Internal

A/D converter 1, accessible via AT commands

Software features

Protocols Embedded TCP/IP, UDP/IP, HTTP/FTP


GNSS Interfaces Direct access to u-blox GNSS via LEON AssistNow software for fastest GNSS Time-to-First-Fix CellLocate® & Hybrid positioning

AT commands 3GPP 27.005, 3GPP 27.007 u-blox proprietary AT command 3GPP 27.010 MUX protocol

Firmware Via UART (Xmodem protocol)upgrade

Special features DTMF decoder InBand modem eCall and ERA-GLONASS support

GSM GSM 850 / 900 / 1800 / 1900 MHz 3GPP Release 99 PBCCH support

GPRS Class 10, CS1-CS4 – up to 85.6 kb/s

CSD GSM max 9.6 kb/s

Voice HR / FR / EFR / AMR Echo cancellation Noise reduction

AT Commands 3GPP 27.005, 3GPP 27.007 u-blox AT command extension 3GPP 27.010 MUX protocol

SMS MT/MO PDU / Text mode


R&TTE, CE, GCF, PTCRB, FCC, IC, NCC, ICASA, A-Tick, AT&T, Rogers, Orange. See the u-blox website for latest approvals.



Support product

EVK-G20 Evaluation kit for LEON-G1

RIL software Android 2.3 and 4.1, Embedded Windows 6.x, 7.x, Windows Mobile 6.5






50 pin LCC (Leadless Chip Carrier): 18.9 x 29.5 x 3.0 mm, < 5 g

Pinout

Package

MIC_BIAS2

MIC_GND2

MIC_GND1

MIC_BIAS1

GND

ANT

GND

GND

GND

VCC50

49

48

47

46

45

44

43

42

41

1

2

3

4

5

6

7

8

9

10RI

DSR

GND

GND

GND

ADC1

Reserved

GND

V_BCKP

GND

LEON-G1Top View

VSIM

SIM_RST

SIM_IO

SIM_CLKSDA

I2S_RXD

I2S_CLK

SCL

I2S_TXD

I2S_WA26

27

28

29

30

31

32

33

34

35

25

24

23

22

21

20

19

18

17

16RxD

GND

HS_DET

PWR_ON

GPIO1

GPIO2

RESET_N

GPIO3

GPIO4

GND

Reserved

SPK_N

SPK_P

HS_PGND36

37

38

39

40

15

14

13

12

11DCD

DTR

RTS

CTS

TxD

CEL

LULA

R

Standard


SARA-U2 series UMTS/HSPA modules

| UMTS/HSPA modules

Highlights

• UMTS/HSPA/GSM module in ultra-small LGA package

• Also available in cost-effective UMTS/HSPA-only versions

• Seamless drop-in migration from SARA-G GSM/GPRS modules


• Low idle mode current


• CellLocate®: (indoor) positioning based on cellular network


SARA-U2 series16.0 x 26.0 x 3.0 mm

Product descriptionSARA-U2 UMTS/HSPA modules provide efficient and cost-effective high-speed mobile connectivity in an ultra-small LGA form factor. The SARA-U2 series offers seamless drop-in migration from GSM (SARA-G3 modules) and CDMA (LISA-C modules) as well as easy migration to LTE (TOBY-L modules).

SARA-U2 modules feature HSPA data-rates of 7.2 Mb/s (downlink) and 5.76 Mb/s (uplink). The modules have an extended operating temperature range of –40 to +85°C, low power consumption, and a rich feature set including dual-stack IPv4 / IPv6.

The SARA-U2 series is ideal for a wide range of indus-trial and consumer applications, such as connected navigation systems, mobile-internet devices, security and surveillance systems, eCall, fleet management, metering, anti-theft systems, and other automotive applications.

SARA-U2 modules provide a fully integrated interface to u-blox satellite positioning chips and modules to support telematics applications.

The SARA-U2 series include variants supporting band combinations for North America and Europe/Africa/Asia. A cost-saving UMTS-only variant is available.

An extensive set of national regulatory and operator certificates is available, with additional certifications in progress.

RIL software for Android and Embedded Windows is available free of charge.

SARA-U2 modules are manufactured in ISO/TS 16949 certified sites. Each module is tested and inspected during production. The modules are qualified according to ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.

Product selector

Model Technology Bands Interface Audio Features Grade

HSU

PA [M

b/s]

HSD

PA [M

b/s]

UM

TS/H

SPA

[MH

z]

GPR

S/ED

GE

[MH

z]

UA

RT

SPI

USB

GPI

O

DD

C f

or G

NSS

/ I2 C

sla

ve

Ana

log

Aud

io

Dig

ital A

udio

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

HTT

P, F

TP

Embe

dded

SSL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FW u

pdat

e vi

a se

rial

eCal

l / E

RA-G

LON

ASS

Rx d

iver

sity

GN

SS v

ia M

odem

Dua

l sta

ck IP

v4/IP

v6

Stan

dard

Prof

essi

onal

Aut

omot

ive

SARA-U260 5.76 7.2850/1900

850/1900

1 1 9 1 1 • • • • • • • • • •

SARA-U270 5.76 7.2900/2100

900/1800

1 1 9 1 1 • • • • • • • • • • •

SARA-U280 5.76 7.2850/1900

1 1 9 1 1 • • • • • • • • • •


UMTS/HSPA modules |

Features

Software features

Protocols Dual stack IPv4/ IPv6 Embedded TCP/IP, UDP/IP HTTP/FTP/SSL (Secure Socket Layer)


GNSS Interfaces Direct access to u-blox GNSS via SARA AssistNow software for fastest GNSS Time-to-First-Fix CellLocate & Hybrid Positioning

Firmware Via UART and USBupgrade

Interfaces

GPIO 9 GPIO, controllable via AT commands

(U)SIM Supports 1.8 V and 3 V, SIM toolkit

Serial 1 UART, 1 USB 2.0 (high-speed, 480 Mb/s), 1 DDC (I2C) for GNSS and other I2C slaves

Audio 1 digital

UMTS/HSPA 850/1900 and 900/2100 MHz 3GPP Release 7 5.76 Mb/s uplink, 7.2 Mb/s downlink

GSM GSM 850/1900 and 900/1800 MHz

GPRS Class 12, CS1-CS4, up to 86.5 kb/s

EDGE Class 12, MCS1-9, up to 236.8 kb/s

CSD GSM max 9.6 kb/s UMTS max 64 kb/s


Voice HR/FR/EFR /AMR/AMR-WB Echo cancellation and noise reduction


U260, U280: PTCRB, FCC, IC, AT&T

U270: GCF, R&TTE, Giteki (Japan), KCC (Korea), NCC, CCC/SRRC/NAL

Planned operator Vodafone, Orange, BellMobility, approvals: SKT (Korea), Telus, Rogers, Softbank (Japan)

See the u-blox website for latest approvals.



Support product

EVK-U26/U27 Evaluation kits for SARA-U2 series

RIL software for Android 2.3, 4.0, 4.1, 4.2 & 4.3 Embedded Windows 6.x, 7.x Windows Mobile 6.5

USB driver Embedded Windows 6.x, 7.x Windows XP, Vista, 7, 8 Windows Mobile 6.5






96 pin LGA: 16.0 x 26.0 x 3.0 mm, < 5 g

Package

Electrical data

Power supply 3.3 V to 4.4 V

Power consumption Power Off 65 μA Idle (2G) 0.9 mA Idle (3G) 0.9 mA GPRS 215 mA (850 MHz, 900 MHz) 140 mA (1800 MHz, 1900 MHz) HSDPA 580 mA HSPA 460 mA

CEL

LULA

R

Standard


http://www.u-blox.com

LISA-U2 series UMTS/HSPA(+) modules

| UMTS/HSPA modules

Product descriptionWith 6-band W-CDMA(UMTS) and quad-band GPRS/EDGE, LISA-U2 modules are suited for networks world-wide. Features include data-rates of up to 21.1 Mb/s (downlink), a rich set of internet protocols, very small footprint, very low power consumption and extended operating temperature range. LISA-U2 modules provide fully integrated access to u-blox positioning products. Antenna diversity permits LISA-U2 modules to provide the highest data speeds.

LISA-U2 modules are ideal for consumer and industrial applications requiring high-speed data transmission rates, and machine-to-machine applications. They are the per-fect choice for mobile internet terminals, tablets, in-car infotainment, connected navigation systems, security and surveillance systems, eCall, fleet management, metering,

Highlights

• Worldwide W-CDMA(UMTS) and GPRS/EDGE coverage• HSDPA 21.1 Mb/s, HSUPA 5.76 Mb/s • SMT form factor, small foot-print• Easy migration to u-blox GSM/GPRS, CDMA and LTE modules• Low idle mode current: 1.5 mA• Extended temperature range: –40°C to +85°C• Simple integration of u-blox GNSS and A-GNSS• CellLocate®: location based on cellular network


LISA-U2 series22.4 x 33.2 x 2.6 mm

Product selector

anti-theft systems, and other automotive applications. The compact SMT package enables easy manufactur-ing, and migration from u-blox SARA, LEON, and other LISA modules is simple. This allows customers to take maximum advantage of their hardware and software investments, and provides very short time-to-market. An extensive set of national regulatory and operator certificates is available. RIL software for Android and Embedded Windows is available free of charge.

LISA-U2 modules are manufactured in ISO/TS 16949 certified sites. Each module is tested and inspected during production. The modules are qualified according to ISO16750 standard: “Road vehicles – Environmen-tal conditions and testing for electrical and electronic equipment”.


HSU

PA [M

b/s]

HSD

PA [M

b/s]

UM

TS/H

SPA

[MH

z]

GPR

S/ED

GE

quad

-ban

d

UA

RT

SPI

USB

GPI

O

DD

C f

or u

-blo

x G

NSS

Ana

log

Aud

io

Dig

ital A

udio

Net

wor

k in

dica

tion

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

HTT

P, F

TP

Embe

dded

SSL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

a se

rial

eCal

l / E

RA-G

LON

ASS

Rx d

iver

sity

GN

SS v

ia M

odem

Stan

dard

Prof

essi

onal

Aut

omot

ive

LISA-U200 5.76 7.2800/850/900/

1700/1900/2100• 1 1 1 14 1 2 • • • • • • • • • • •

LISA-U230 5.76 21.1800/850/900/

1700/1900/2100 • 1 1 1 14 1 2 • • • • • • • • • • • •

LISA-U260 5.76 7.2 850/1900 • 1 1 1 14 1 2 • • • • • • • • • • •

LISA-U270 5.76 7.2 900/2100 • 1 1 1 14 1 2 • • • • • • • • • • •

LISA-U200FOTA 5.76 7.2 800/850/900/

1700/1900/2100 • 1 1 1 14 1 2 • • • • • • • • • • • •


UMTS/HSPA modules |

Features

Electrical data

Power supply 3.3 V to 4.4 VPower consumption Power Off 50 μA Idle (2G, DRX5) 1.3 mA Idle (3G, DRX7) 1.7 mA GSM Voice 175 mA (Bands II & III) UMTS Voice 385 mA (Band V) GPRS Data 175 mA (1 Tx slot, Bands II & III) 400 mA (4 Tx slots, Bands II & III) HSPA 500 – 800 mA (depends on frequency band)

Interfaces

GPIO Up to 14 GPIOs, configurable


Serial 1 UART, 1 SPI 1 USB 2.0 (high-speed, 480 Mb/s)

Audio 2 digital

Software features

Protocols Embedded TCP/IP, UDP/IP HTTP/FTP/SSL (Secure Socket Layer)Network Jamming detectionGNSS Interfaces Direct access to u-blox GNSS via LISA AssistNow software for fastest GNSS Time-To-First-Fix CellLocate & Hybrid PositioningFW upgrade Via UART and USB

UMTS/HSPA 800/850/900/1700/1900/2100 MHz (Bands VI, V, VIII, IV, II, I) 3GPP Release 7 5.76 Mb/s uplink, 21.1 Mb/s downlink or 5.76 Mb/s uplink, 7.2 Mb/s downlink

GSM GSM 850 / 900 / 1800 / 1900 MHz 3GPP Release 7, PBCCH support

GPRS Class 12, CS1-CS4 – up to 86.5 kb/s

EDGE Class 12, MCS1-9 – up to 236.8 kb/s

CSD GSM max 9.6 kb/s UMTS max 64 kb/s


Voice HR/FR/EFR/AMR/AMR-WB


GCF, R&TTE, PTCRB, FCC, IC, Giteki (Japan), A-tic (Australia), CCC (China), NCC (Taiwan), KCC (Korea), IDA (Singapore), ANATEL (Brazil), ICASA (S. Africa).AT&T, DoCoMo, Softbank, SKT (S.Korea), Telstra (Australia), Vodafone, BellMobility, Telus, Rogers (Canada). See the u-blox website for latest approvals.

Support products

EVK-U20/EVK-U23 Evaluation kits for LISA-U2 series

RIL software Android 2.3, 4.0, 4.2, 4.4, Embedded Windows 6.x, 7.x, Windows Mobile 6.5

USB driver Embedded Windows 6.x, 7.x, Windows XP, Vista, 7, Windows Mobile 6.5




Operating temperature –40 to +85°C (extended range)RoHS compliant (lead-free)Qualification according to ISO 16750Manufactured in ISO/TS 16949 certified production sites

76 pin LCC (Leadless Chip Carrier): 22.4 x 33.2 x 2.6 mm, < 7 g

Pinout

LISA-U2Top View

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

2829303132333435363738

65

64

63

62

61

60

59

58

57

56

55

54

53

52

51

50

49

48

47

46

45

44

43

42

41

40

39

76757473727170

69686766

GND

GND

VCC

VCC

VCC

GND

SPI_MRDY / GPIO14

SPI_SRDY / GPIO13

SPI_MISO / GPIO12

SPI_MOSI / GPIO11

SPI_SCLK / GPIO10

GPIO9 / I2S1_WA

RSVD / CODEC_CLK

GPIO5

VSIM

SIM_RST

SIM_IO

SIM_CLK

SDA

SCL

GND

GND

V_BCKP

V_INT

RSVD

GND

GND

GND

DSR

RI

DCD

DTR

RTS

CTS

TXD

RXD

GND

VUSB_DET

PWR_ON

GPIO1

GPIO2

RESET_N

GPIO3

GPIO4

GND

USB_D-

USB_D+

RSV

D /

AN

T_D

IV

AN

T

GN

D

GN

D

GPIO8 / I2S1_CLK

GPIO6 / I2S1_RXD

GPIO7 / I2S1_TXD

RSVD / I2S_WA

RSVD / I2S_TXD

RSVD / I2S_CLK

RSVD / I2S_RXD

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

Pin 28 - 38 = GND

Package

CEL

LULA

R

Standard



LISA-C2 series CDMA 1xRTT module

| CDMA modules

The LISA-C2 form factor is compatible with the LISA-U, SARA and LEON module families, enabling straightfor-ward development of products supporting either CDMA, UMTS/HSPA, or GSM/GPRS wireless technology with the same application board. This allows customers to take maximum advantage of their hardware and software investments.

LISA-C2 is qualified according to ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”. And certified by Sprint, Verizon and Aeris.

Product descriptionThe LISA-C2 series provides dual-band CDMA2000 1xRTT data and voice communication in a compact SMT form factor. These are fully qualified and certified mod-ules, featuring low power consumption and a rich set of internet protocols.

LISA-C2 modules are ideally suited to M2M applications such as: fleet management, Automatic Meter Reading (AMR), people and asset tracking, surveillance and securi-ty and Point of Sales (PoS) terminals.

Highlights

• Dual-band CDMA2000 1xRTT 800 MHz/1900 MHz

• SMT form factor, extremely small foot-print

• Low power consumption

• Pin/pad compatible with u-blox GSM/GPRS, W-CDMA (UMTS) and LTE modules


• USB 2.0 and serial interfaces (27.010 MUX support)

• Sprint, Verizon and Aeris approvals

Product selector


CD

MA

1xR

TT [k

b/s]

(for

war

d/re

vers

e)

CD

MA

[MH

z]

UA

RT

SPI

USB

GPI

O

DD

C f

or u

-blo

x G

NSS

S

Ana

log

Aud

io

Dig

ital A

udio

Net

wor

k in

dica

tion

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/IP

, UD

P/IP

Embe

dded

FTP

, HTT

P

Embe

dded

SSL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

a se

rial i

nter

face

eCal

l / E

RA G

LON

ASS

Rx d

iver

sity

GN

SS v

ia M

odem

Stan

dard

Prof

essi

onal

Aut

omot

ive

LISA-C200 153 800/1900 1 1 5 • 1 1 A • • • • A S • •

LISA-C20022.4 x 33.2 x 2.7 mm

A = available from versions x4S onwards S = Sprint version only


CDMA modules |

Features

Electrical data


Power consumption

Power Off < 20 μA Sleep mode < 5 mA Data traffic < 750 mA

Interfaces

Antenna 50 Ω Antenna supervisor

Serial 1 UART (5 wire) 1 USB 2.0 (high-speed)

Audio 1 audio digital (PCM) interface 1 audio analog interface

GPIO 5

Software features

Protocols Embedded UDP/IP, TCP/IP, HTTP and FTP

Network OTA provisioning, software maintenance and device management (OTASP, OTAPA) OMA-DM / FOTA

AT commands Enhanced AT command set IS-707.3 3GPP 27.005, 3GPP 27.007 and ITU-T V.25 u-blox proprietary AT commands 3GPP 27.010 MUX protocol

Firmware upgrade Via UART and USB FOTA (Sprint)

CDMA2000 1xRTT 800/1900 MHz (Sprint and Verizon bands) 153 kb/s forward/reverse

Voice Analog / digital

SMS Text mode

Carrier provisioning Over-the-Air (Sprint) OTASP/OTAPA (Verizon)

GNSS interfaces Direct access to u-blox GNSS via LISA-C2, AssistNow software for faster acquisition

FCC, IC, Sprint, Verizon, Aeris. See the u-blox website for latest approvals.


Support products

EVK-C20-0xS Evaluation kit for LISA-C200 (Sprint)

EVK-C20-2xS Evaluation kit for LISA-C200 (Verizon)



Package


Operating –30°C to +85°Ctemperature (extended range)



76 pin LCC (Leadless Chip Carrier):22.4 x 33.2 x 2.7 mm, < 7 g

Pinout

LISA-C2Top View

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

2829303132333435363738

65

64

63

62

61

60

59

58

57

56

55

54

53

52

51

50

49

48

47

46

45

44

43

42

41

40

39

76757473727170

69686766

GND

GND

VCC

VCC

VCC

GND

RSVD

RSVD

RSVD

RSVD

RSVD

SPK_N

RSVD

GPIO5

VSIM

SIM_RST

SIM_IO

SIM_CLK

RSVD

RSVD

GND

GND

RSVD

V_INT

RSVD

GND

GND

GND

RSVD

RI

RSVD

RSVD

RTS

CTS

TXD

RXD

GND

VUSB_DET

PWR_ON

GPIO1

GPIO2

RESET_N

GPIO3

GPIO4

GND

USB_D-

USB_D+

RSV

D

AN

T

GN

D

GN

D

SPK_P

MIC_N

MIC_P

PCM_SYNC

PCM_DO

I2S_CLK

PCM_DI

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

Pin 28 - 38 = GND

CEL

LULA

R

Standard



LISA-C210 CDMA 1xRTT 450 MHz module

| CDMA modules

These requirements are critical for sensitive applications such as smart metering and smart grid.

The LISA-C210 is compatible with the LISA-U, LISA-C200,SARA-G and SARA-U module families, enabling straight-forward development of products supporting either CDMA, UMTS/HSPA, or GSM/GPRS wireless technology with the same application board. This allows customers to take maximum advantage of their hardware and software investments.

LISA-C210 will be certified according to R&TTED andCDMA certifications and qualified according to ISO 16750 – Environmental conditions and electrical testing for electrical and electronic equipment for road vehicles.

Product descriptionThe LISA-C210 provides CDMA2000 1xRTT 450MHz data and voice communication in a compact SMT form factor. It is a fully qualified and certified module, featur-ing low power consumption and a rich set of Internet protocols. It is ideally suited to M2M applications and in particular to Automatic Meter reading Applications (AMR).

CDMA 450 MHz technology, due to its low frequency, provides a very efficient RF propagation, which means superior area coverage and building penetration, and allows a wide area to be covered with a relatively low number of base stations. Such coverage makes this technology extremely interesting for the deployment of private communication networks that require a high level of security, service quality and network control.

Highlights

• CDMA 1xRTT 450 MHz module in LGA package, for easy manufacturing

• SMT form factor, extremely small foot-print


• Pin/pad compatible with u-blox GSM/GPRS, W-CDMA (UMTS) and LTE modules


• USB 2.0 and serial interfaces (27.010 MUX support)

Product selector


CD

MA

1xR

TT [k

b/s]

(for

war

d/re

vers

e)

CD

MA

[MH

z]

UA

RT

SPI

USB

GPI

O

DD

C f

or u

-blo

x G

NSS

S

Ana

log

Aud

io

Dig

ital A

udio

Net

wor

k in

dica

tion

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/IP

, UD

P/IP

Embe

dded

FTP

, HTT

P

Embe

dded

SSL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

a se

rial i

nter

face

eCal

l / E

RA G

LON

ASS

Rx d

iver

sity

GN

SS v

ia M

odem

Stan

dard

Prof

essi

onal

Aut

omot

ive

LISA-C210 153 450 1 1 5 • 1 1 • • • • • • • • •

LISA-C21022.4 x 33.2 x 2.7 mm


CDMA modules |

Features

Electrical data


Power consumption

Power Off < 20 μA Sleep mode < 5 mA Data traffic < 750 mA

Interfaces

Antenna 50 Ω Antenna supervisor

Serial 1 UART (5 wire) 1 USB 2.0 (high-speed)

Audio 1 audio digital (PCM) interface 1 audio analog interface

GPIO 5

Software features

Protocols Embedded UDP/IP, TCP/IP, HTTP and FTP

AT commands Enhanced AT command set IS-707.3 3GPP 27.005, 3GPP 27.007 and ITU-T V.25 u-blox proprietary AT commands 3GPP 27.010 MUX protocol

Firmware upgrade Via UART and USB FOTA (Sprint)

CDMA2000 1xRTT Rev. A, 450 MHz, block designator C 153 kb/s forward/reverse

Voice Analog / digital

SMS Text mode

GNSS interfaces Direct access to u-blox GNSS via LISA-C210, AssistNow software for faster acquisition

R&TTEd, CCF See the u-blox website for latest approvals.


Support products

EVK-C21-0xS Evaluation kit for LISA-C210


LISA-C210-0xS1 CDMA 2000 1xRTT 450 MHz, data and voice 1 x refers to firmware version.

Package


Operating –30°C to +85°Ctemperature (extended range)



76 pin LCC (Leadless Chip Carrier):22.4 x 33.2 x 2.7 mm, < 7 g

Pinout

LISA-C210Top View

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

2829303132333435363738

65

64

63

62

61

60

59

58

57

56

55

54

53

52

51

50

49

48

47

46

45

44

43

42

41

40

39

76757473727170

69686766

GND

GND

VCC

VCC

VCC

GND

RSVD

RSVD

RSVD

RSVD

RSVD

SPK_N

RSVD

GPIO5

VSIM

SIM_RST

SIM_IO

SIM_CLK

RSVD

RSVD

GND

GND

RSVD

V_INT

RSVD

GND

GND

GND

RSVD

RI

RSVD

RSVD

RTS

CTS

TXD

RXD

GND

VUSB_DET

PWR_ON

GPIO1

GPIO2

RESET_N

GPIO3

GPIO4

GND

USB_D-

USB_D+

RSV

D

AN

T

GN

D

GN

D

SPK_P

MIC_N

MIC_P

PCM_SYNC

PCM_DO

I2S_CLK

PCM_DI

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

Pin 28 - 38 = GND

CEL

LULA

R

Standard



| CDMA modules

FW2770pCDMA EV-DO module

Highlights

• CDMA EV-DO Rev A supporting data rates up to 3.1 Mb/s (forward link) and 1.8 Mb/s (reverse link)

• PCI Express Mini Card form factor

• Dual band 800/1900 MHz

• USB 2.0 interface

• A-GPS (optional)

• Rx diversity

• Sprint, Aeris and Verizon approvals

Product descriptionThe u-blox FW2770p module provides a full-featured EV-DO Rev A dual band CDMA solution in an easy to integrate PCI Express Mini Card form factor. This high speed module supports EV-DO Rel 0 and 1xRTT networks and is ideally suited to consumer applications requiring high data transmission rates such as laptop and tablet connectivity, mobile internet terminals and internet gateways.

The FW2770p is fully certified and is available with or without GPS to meet customer requirements.

Supporting a comprehensive AT command feature set, the FW2770p provides quick time to market and optimal performance.

Product selector


CD

MA

EV

-DO

[Mb/

s](f

orw

ard)

CD

MA

EV

-DO

[Mb/

s](r

ever

se)

CD

MA

1xR

TT [k

b/s]

(for

war

d/re

vers

e)

CD

MA

UA

RT

SPI

USB

GPI

O

Ana

log

Aud

io

Dig

ital A

udio

Net

wor

k in

dica

tion

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

FTP

, HTT

P

Embe

dded

SSL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

a se

rial i

nter

face

eCal

l / E

RA-G

LON

ASS

Rx d

iver

sity

GPS

Stan

dard

Prof

essi

onal

Aut

omot

ive

PCI-D100 3.1 1.8 153 800/1900 1 • • • • •

PCI-D101 3.1 1.8 153 800/1900 1 • • • • • •

FW2770p30.0 x 51.0 x 4.5 mm


CDMA modules |

CEL

LULA

R

Features

Electrical data

Power supply VAUX for Mini PCIe (3.3 V)

Power consumption Sleep mode <2 mA Idle mode ~100 mA Data traffic mode ~800 mA

RF sensitivity –106.5 dBm, ± 0.5 dBm (typical)

Max. output +24 dBm, ± 0.5 dBm (typical)

Software features

Protocols Embedded TCP/IP and UDP/IP SMS client with inbox functionality

Network Over-the-Air (OTA) provisioning, software maintenance, and device managementAT commands Enhanced AT command set: IS-707.3, GSM 07.05, GSM 07.07, ITU-T V.25 as applicable

Firmware upgrade Via serial FOTA

CDMA EV-DO Rev A 800/1900 MHz 3.1 Mb/s (forward link) 1.8 Mb/s (reverse link)


Support products

EVK-D10 Evaluation kit for FW2770p


See datasheet


Operating temp. –30°C to +85°C

Storage temp. –40°C to +105°C


Supported standards

• IS-856-A (CDMA1xEV-DO Rev A)

• IS-856 (CDMA1xEV-DO Rel 0)

• IS-2000 (CDMA2000 Release 0) MOB_P_REV 6

• IS-95A/IS-95B (JSTD-008) backward compatibility (MOB_P_REV1,3,4,5)

• TIA/EIA-98F minimum RF performance

• TIA/EIA-637A; two-way SMS

• TIA/EIA-683A; OTASP and OTAPA

• TIA/EIA-707A; data service options, CSD

• OMA-DM version 1.2

Interfaces

RF 3 Hirose UFL-R_XMT (50 Ω) connectors (main, diversity, and GPS)

Communication 1 USB 2.0 (high-speed, 480 Mb/s)

R-UIM Supported

Package

52 pin PCI Express Mini Card, 30 x 51 x 4.5 mm, 12 g


FCC, CDG1 and 2, CCF, US CDMA carriers approvals.See website for latest approvals.

Standard



TOBY-L100 LTE module

| LTE modules

Highlights• Single-mode LTE LGA module in a very small form-factor

• LTE Cat. 3, 100 Mb/s download, 50 Mb/s upload

• Easy migration from u-blox W-CDMA, CDMA, GSM modules

• Dual-band support for the Verizon network (North America)



TOBY-L100:24.8 x 35.6 x 2.6 mm

Product descriptionThe TOBY-L100 single-mode LTE module in a very small form factor is easy to integrate in compact designs. The TOBY-L100 supports up to two LTE-FDD bands. As a single-mode LTE module, it offers cost advantages compared to multi-mode (LTE/3G/2G) modules, and is optimized for applications using only LTE networks.

The TOBY-L100 module is dedicated to data transfer, supporting a high-speed USB 2.0 interface. With LTE Category 3 data rates of 100 Mb/s (downlink) and 50 Mb/s (uplink), the module is ideal for applications requiring the highest data-rates and high-speed internet access. It is the perfect choice for consumer fixed-wireless terminals, mobile routers and gateways, and applications requiring video streaming. It is also optimally suited for industrial (M2M) applications, such as remote access to video cameras, digital signage, telehealth, security and surveillance systems.

The TOBY-L100 can operate in a temperature range of –40 to +85°C, making it well suited to devices intended for outdoor operation and harsh environments.

The compact LGA package enables easy manufacturing, and straightforward migration from u-blox GSM/GPRS, W-CDMA(UMTS) and CDMA modules. This allows cus-tomers to take maximum advantage of their hardware and software investments, and provides very short time-to-market. The module is fully certified for the Verizon network. USB drivers and RIL software for Android are available free of charge.

TOBY-L100 modules are manufactured in ISO/TS 16949 certified sites. Each module is tested and inspected during production.

Product selector

Model Region Access Technology GNSS Interfaces Audio Features Grade

3GPP

Rel

ease

Bas

elin

e

LTE

FDD

Cat

egor

y

LTE

Band

s

MIN

O

GN

SS r

ecei

ver

UA

RT

USB

2.0

RMII

/ RG

MII

SDIO

(Mas

ter/

Slav

e)

GPI

O

Ana

log

Aud

io

Dig

ital A

udio

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

HTT

P, F

TP, S

SL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate

FOTA

FW u

pdat

e vi

a se

rial

Stan

dard

Prof

essi

onal

Aut

omot

ive

TOBY-L100N. America(Verizon)

9 3 4, 13 2x2 • 6 U


U = via USB only

LTE modules |

Features

Electrical data


Power consumption

Power Off 40 μA Idle (power saving) 2.6 mA Transmitting 740 mA (Band 4, 10 MHz channel width) Transmitting 800 mA (Band 13, 10 MHz channel width)

Interfaces

Serial 1 USB 2.0 (high-speed, 480 Mb/s)

GPIO 6 GPIOs2

(U)SIM 1 4-wire interface, supports 1.8 V and 3 V, SIM toolkit

2 Available in FW version 01S

LTE Cat. 3 50 Mb/s UL,100 Mb/s DL FDD Bands 4, 13 3GPP Release 9 FDD channel bandwidth 1.4 – 20 MHz MIMO 2x2 Rx diversity

SMS SMS via embedded IMS1

Network Status Indication via LED

Firmware upgrade via USB

1 IP Multimedia Subsystem


GCF, FCC, Verizon




Support product

EVK-L10 Evaluation kit for TOBY-L1 series

RIL software Android

USB driver Windows Vista, Windows 7 and 8




REACH compliant


152 pin LGA (Land Grid Array): 24.8 x 35.6 x 2.6 mm, < 7 g

Package

CEL

LULA

R

Standard


TOBY-L2 seriesLTE/HSPA+/GPRS modules

| LTE modules

The temperature range of –40 to +85 guarantees opera-tion in harsh environments and in very compact designs.The compact LGA package enables straightforward automated manufacturing. Easy migration from u-blox GSM/GPRS, HSPA and CDMA modules maximizes the investments of customers, simplify logistics, and have very short time-to-market.TOBY-L2 modules are manufactured in ISO/TS 16949 certified sites, with the highest production standards and the highest quality and reliability. Each module is fully tested and inspected during production. Modules are qualified according to ISO16750 – for systems installed in vehicles.TOBY-L2 modules come in variants for America, Europe/Africa and Asia-Pacific. A variant for Japan is planned.USB drivers and RIL software for Android are free of charge.

Product description

TOBY-L2 series modules support multi-band LTE-FDD, along with HSPA+ and GPRS/ EDGE in a very small LGA package.With 3GPP Rel. 9 and LTE Cat 4, which provides data throughput up to 150 Mb/s, the modules are ideal for both industrial and consumer applications requiring the highest data-rates. They are the perfect choice for vehicle infotainment systems, ruggedized mobile terminals, set top boxes, notebooks, tablets, as well as high-speed M2M applications such as digital signage, mobile health, remote security and video systems where backwards compatibility with 3G and 2G networks is desired.Voice over LTE and Circuit-Switched-Fall-Back are sup-ported.The modules support HSPA+ guaranteed connectivity, also in areas that do not yet have LTE coverage.

Highlights• Powerful LTE module in LGA package, for easy manufacturing

• Highest throughput of up to 150 Mb/s with LTE Cat. 4

• Voice over LTE (VoLTE)

• Variants for America, Europe, and Asia-Pacific

• Industrial temperature range –40 to +85 °C


• Manufactured in ISO/TS 16949 certified production sites TOBY-L2 series:24.8 x 35.6 x 2.6 mm


Product selector

Model Region Access Technology Interfaces Audio Features Grade

3GPP

Rel

ease

Bas

elin

e

LTE

FDD

Cat

egor

y

LTE

Band

s

UM

TS B

ands

GSM

Ban

ds

MIN

O

UA

RT

USB

2.0

DD

C

SDIO

(Mas

ter/

Slav

e)

GPI

O

Ana

log

Aud

io

Dig

ital A

udio

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

HTT

P, F

TP, S

SL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

eCal

l / E

RA G

LON

ASS

Dua

l sta

ck IP

v4/I

Pv6

Stan

dard

Prof

essi

onal

Aut

omot

ive

TOBY-L200North

America9 4 2, 4, 5

7, 17850/900/AWS

1900/2100 Q 2x2 1 1 1 1 10 1 • • • • • • • •

TOBY-L201North

America9 4 2, 4, 5

13, 17800/850

1900/2100 2x2 1 1 1 1 10 1 • • • • • • •

TOBY-L210Europe/APAC

9 4 1, 3, 57, 8, 20

850/9001900/2100 Q 2x2 1 1 1 1 10 1 • • • • • • • •

TOBY-L280 APAC 9 4 1, 3, 57, 8, 28

850/9002100 Q 2x2 1 1 1 1 10 1 • • • • • • •

Q = Quad-band

LTE modules |

CEL

LULA

R

Standard


Features

Electrical data

Power supply 3.8 V nominal, range 3.3 V to 4.4 V

Interfaces

Serial 1 UART 1 USB 2.0 (high-speed, 480 Mb/s) 1 SDIO (Master)

GPIO Up to 10 GPIOs, configurable


Audio 1 digital

LTE Cat. 4 (150 Mb/s DL, 50 Mb/s UL) 3GPP Release 9 FDD Bands: TOBY-L200: 2,4,5,7,17 (N.America) TOBY-L201: 2,4,5,13,17 (N.America) TOBY-L210: 1,3,5,7,8,20 (EU/Asia/Africa) TOBY-L280: 1,3,5,7,8,28 (APAC) All channel bandwidths: 1.4 - 20 MHz MIMO 2x2 Rx diversity

UMTS/HSPA Bands (in MHz): TOBY-L200: 850/900/AWS/1900/2100 TOBY-L201: 800/850/1900/2100 TOBY-L210: 850/900/1900/2100 TOBY-L280: 850/900/2100 42 Mb/s downlink, 5.76 Mb/s uplink

GSM Bands (in MHz): TOBY-L200: 850/900/1800/1900 TOBY-L210: 850/900/1800/1900 TOBY-L280: 850/900/1800/1900 GPRS & EDGE Class 12

SMS MT/MO PDU/Text mode SMS over IMS and via SMS-C

Voice1 VoLTE and CSFB Codec: HR/FR/EFR/AMR/AMR-WB Echo cancelation & noise reduction1 Available in FW version 01S


TOBY-L200: PTCRB, FCC, IC, AT&T

TOBY-L201: PTCRB,GCF,FCC,IC,AT&T,Verizon

TOBY-L210 GCF, PTCRB, FCC, RTTE&D, KCC (Korea), RCM (Australia), operators approvals

TOBY-L280: PTCRB,GCF,NCC,RCM (Australia),Telstra



See datasheet

Support product

EVK-L2x Evaluation kit for TOBY-L2 series

RIL software Available for Android

USB driver Available for Embedded Windows 6.x 7.x and Windows 7, 8






152 pin LGA (Land Grid Array): 24.8 x 35.6 x 2.6 mm, < 7 g

Package

Software features

Protocols Dual stack IPv4 / IPv6 Embedded TCP/IP, UDP/IP2

HTTP/FTP/SSL (Secure Socket Layer)2


GPS Interfaces2 Direct access to u-blox GNSS via TOBY AssistNow software for fastest GPS Time-To-First-Fix CellLocate® & Hybrid Positioning

Firmware upgrade Via UART and USB


MPCI-L100 LTE module

| LTE modules

Highlights

• Single-mode LTE modem in standard Mini PCIe form factor

• LTE Cat. 3, 100 Mb/s download, 50 Mb/s upload


• Dual-band support for the Verizon network (North America)

• Industrial temperature range: –40°C to +85°C

• Manufactured in ISO/TS 16949 certified production sites MPCI-L100:

30.0 x 51.0 x 3.7 mm

Product descriptionThe MPCI-L100 single-mode LTE module in the standard Mini PCIe form factor is easy to integrate in compact designs. The MPCI-L100 supports both Verizon LTE bands. As a single-mode LTE module, it offers cost advantages compared to multi-mode (LTE/3G/2G) modules, and is optimized for applications using only LTE networks.

The MPCI-L100 module is dedicated to data transfer, supporting a high-speed USB 2.0 interface. With LTE category 3 data rates of 100 Mb/s (downlink) and 50 Mb/s (uplink), the module is ideal for applications re-quiring the highest data-rates and high-speed internet access. It is the perfect choice for fixed-wireless termi-nals, mobile routers and gateways, and applications requiring video streaming. It is also optimally suited for (M2M) applications, such as remote access to video cameras, digital signage, telehealth, security and sur-veillance systems.

The MPCI-L100 can operate in a temperature range of –40 to +85°C, making it well suited to devices intended for outdoor operation and harsh environments.

The Mini PCIe package enables easy plug and play and manufacturing flexibility in dealing with multiple end product SKUs. The MPCI-L100 module is software and interface compatible with the u-blox TOBY-L100 mod-ule. This allows customers to take maximum advantage of their hardware and software investments, and provides very short time-to-market. The module is fully certified for the Verizon network. USB drivers and RIL software for Android are available free of charge.

MPCI-L100 modules are manufactured in ISO/TS 16949 certified sites. Each module is tested and inspected during production.

Product selector


3GPP

Rel

ease

Bas

elin

e

LTE

FDD

Cat

egor

y

LTE

Band

s

MIN

O

GN

SS r

ecei

ver

UA

RT

USB

2.0

RMII

/ RG

MII

SDIO

(Mas

ter/

Slav

e)

GPI

O

Ana

log

Aud

io

Dig

ital A

udio

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

HTT

P, F

TP, S

SL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

FW u

pdat

e vi

a se

rial

Stan

dard

Prof

essi

onal

Aut

omot

ive

MPCI-L100N. America(Verizon)

9 3 4, 13 2x2 • U

U = via USB only


LTE modules |

Features

Electrical data

Power supply 3.3 V ± 9%

Power consumption Idle (power saving) < 3.9 mA Transmitting 930 mA (Band 4) 850 mA (Band 13)

Interfaces

Serial 1 USB 2.0 (high-speed, 480 Mb/s)

(U)SIM 1 4-wire interface, supports 1.8 V and 3 V, SIM toolkit

LTE Cat. 3 50 Mb/s UL,100 Mb/s DL FDD Bands 4, 13 3GPP Release 9 FDD channel bandwidth 1.4 – 20 MHz MIMO 2x2 Rx diversity

SMS SMS via embedded IMS1

Network Status indication via LED

Firmware upgrade via USB1 IP Multimedia Subsystem


GCF, FCC, Verizon



See datasheet

Support product

EVK-L10M Evaluation kit for MPCI-L100

RIL software Android

USB driver Windows Vista, Windows 7 and 8




REACH compliant


52 pin PCI Express Mini Card, 30 x 51 x 3.7 mm(components on top side only)

Package

CEL

LULA

R

Standard


MPCI-L2 series LTE/HSPA+/GPRS mini PCIe modules

| LTE modules

Highlights

• Powerful LTE modules in industry-standard Mini PCIe package

• Highest throughput of up to 150 Mb/s with LTE Cat. 4

• Variants for America and Europe/Asia

• Industrial temperature range –40°C to +85°C


Product descriptionMPCI-L2 series modules support multi-band LTE-FDD, along with HSPA+ and GPRS/ EDGE.

With 3GPP Rel. 9 and LTE Cat. 4, which provides data throughput up to 150 Mb/s, the modules are ideal for both industrial and consumer applications requiring the highest data-rates.

Typical applications are industrial computing, ruggedized terminals, video communication, wireless routers, alarm panels and surveillance, digital signage and payment systems.

The temperature range of –40°C to +85°C guarantees operation in harsh environments, making the modules suitable for industrial applications.

The modules support HSPA+ guaranteed connectivity, even in areas that do not yet have LTE coverage.

The industry standard Mini PCIe package enables easy integration into an application board, and is also ideal for manufacturing of small series.

MPCI-L2 modules are manufactured in ISO/TS 16949 certified sites, with the highest production standards and the highest quality and reliability. Each module is fully tested and inspected during production.

MPCI-L2 modules come in variants for America and Europe/Asia/Africa. A variant for Japan is planned.

USB drivers and RIL software for Android are free of charge.

Product selector


3GPP

Rel

ease

Bas

elin

e

LTE

FDD

Cat

egor

y

LTE

Band

s

UM

TS B

ands

GSM

Ban

ds

MIN

O

GN

SS r

ecei

ver

UA

RT

USB

2.0

DD

C

SDIO

(Mas

ter/

Slav

e)

GPI

O

Ana

log

Aud

io

Dig

ital A

udio

Ant

enna

Sup

ervi

sor

Jam

min

g D

etec

tion

Embe

dded

TC

P/U

DP

Embe

dded

HTT

P, F

TP, S

SL

Ass

istN

ow s

oftw

are

Cel

lLoc

ate®

FOTA

eCal

l / E

RA G

LON

ASS

Dua

l sta

ck IP

v4/I

Pv6

Stan

dard

Prof

essi

onal

Aut

omot

ive

MPCI-L200North

America9 4 2, 4, 5

7, 17850/900/AWS

1900/2100quad-band

2x2 1 • • • • • • •

MPCI-L210Europe/APAC

9 4 1, 3, 57, 8, 20

850/9001900/2100

quad-band

2x2 1 • • • • • • •

MPCI-L2 series:30.0 x 51.0 x 3.7 mm


LTE modules |

Features

Electrical data

Power supply 3.3 V ± 9%

Interfaces

RF 2 Hirose UFL-R_XMT (50 Ω) connectors (main and diversity)

Data 1 USB 2.0 (high-speed, 480 Mb/s)


LTE Cat. 4 (150 Mb/s DL, 50 Mb/s UL) 3GPP Release 9 FDD Bands: MPCI-L200: 2,4,5,7,17 (America) MPCI-L210: 1,3,5,7,8,20 (EU, Asia, Africa) All channel bandwidths: 1.4 - 20 MHz MIMO 2x2 Rx diversity

UMTS/HSPA Bands: MPCI-L200: 850/900/AWS/1900/2100 MHz MPCI-L210: 850/900/1900/2100 MHz 42 Mb/s downlink, 5.76 Mb/s uplink

GSM Bands: MPCI-L200: 850/900/1800/1900 MHz MPCI-L210: 850/900/1800/1900 MHz GPRS & EDGE Class 12

SMS MT/MO PDU/Text mode SMS over IMS and via SMS-C


MPCI-L200 PTCRB, FCC, IC, AT&T

MPCI-L210 GCF, PTCRB, FCC, RTTE&D, KCC (Korea), A-tick (Australia), operators approvals



See datasheet

Support product

RIL software Available for Android

USB driver Available for Embedded Windows 6.x 7.x and Windows 7, 8





52 pin PCI Express Mini Card, 30 x 51 x 3.7 mm(components on top side only)

Package

Software features

Protocols Dual stack IPv4 / IPv6 Embedded TCP/IP, UDP/IP1

HTTP/FTP/SSL (Secure Socket Layer)1


Firmware upgrade Via USB


CEL

LULA

R

Standard


| Short range radio modules

Short range radio modules

Short range radio modules |

Overview

SHO

RT

RA

NG

E


Model Radio Interfaces Power Connectors Features Grade

Cla

ssic

Blu

etoo

th

Blue

toot

h lo

w e

nerg

y

Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Low

Ene

rgy

Seria

l Por

t Se

rvic

e

Max

out

put

pow

er

incl

udin

g an

tenn

a

Max

ran

ge

Ant

enna

typ

e

UA

RT

SPI a

nd I2 C

GPI

O p

ins

AD

con

vert

ers

Cur

rent

con

sum

ptio

n (id

le)

Ultr

a lo

w p

ower

Sold

er p

ads

Boar

d-to

-boa

rd

JST

conn

ecto

r

4 th

ru-h

ole

sold

er

poin

ts f

or s

enso

rs

Embe

dded

MC

U

Thro

ughp

ut

AT

com

man

d su

ppor

t

Max

num

ber

of s

lave

s

Exte

nded

Dat

a M

ode

prot

ocol

Cus

tom

er a

pplic

atio

npl

atfo

rm

And

roid

con

nect

ivity

iOS

conn

ectiv

ity

Stan

dar

d

Pro

fess

ion

al

Au

tom

oti

ve

Bluetooth low energy / Bluetooth Smart stand-alone modules

OLS425i-04 • v4.0 • 3 dBm 50 m I • 11 0.4 μA • • • 26 kbps • 1 • •

OLS425x-04 • v4.0 • 6 dBm 200 m E • 11 0.4 μA • • • 26 kbps • 1 • •

OLP425i-04 • v4.0 G 3 dBm 50 m I • • 18 4 • • • • 3 • • •

OLP425x-04 • v4.0 G 6 dBm 200 m E • • 18 4 • • • • 3 • • •

OLP425i-16 • v4.0 G 3 dBm 50 m I • • 18 4 • • • • • 3 • • •

OLP425x-16 • v4.0 G 6 dBm 200 m E • • 18 4 • • • • • 3 • • •

Bluetooth dual-mode / Bluetooth Smart Ready stand-alone modules

OBS421i-24* • • v4.0 SDPG • 11 dBm 250 m I • 9 0.6 mA • • • 1.3 Mbps • 7 • • LE

OBS421x-24* • • v4.0 SDPG • 13 dBm 300 m E • 9 0.6 mA • • • 1.3 Mbps • 7 • • LE

OBS421i-i4 • • v4.0 SDPG • 11 dBm 250 m I • 9 0.6 mA • • • 1.3 Mbps • 7 • • •

OBS421x-i4 • • v4.0 SDPG • 13 dBm 300 m E • 9 0.6 mA • • • 1.3 Mbps • 7 • • •OBS421i-24 for cust. apps • • v4.0 SDG • 11 dBm 250 m I • • 21 7 0.6 mA • • • 1.3 Mbps • 7 • • • LE

OBS421x-24 for cust. apps • • v4.0 SDG • 13 dBm 300 m E • • 21 7 0.6 mA • • • 1.3 Mbps • 7 • • • LE

Classic Bluetooth stand-alone modules

OBS418i-04 • v2.1 SD 6 dBm 75 m I • 9 12 mA • • • 350 kbps • 1 •

OBS418x-04 • v2.1 SD 8 dBm 150 m E • 9 12 mA • • • 350 kbps • 1 •

OBS419i-04 • v2.1+EDR SDP 6 dBm 75 m I • 9 0.6 mA • • • 950 kbps • 3 • •

OBS419x-04 • v2.1+EDR SDP 8 dBm 150 m E • 9 0.6 mA • • • 950 kbps • 3 • •

P = PANG = GATT

* Applies to product with standard serial port application (not customer developed application)

E = U.FL connector(s) for externa antennaI = Internal antenna

B = BluetoothLE = Bluetooth low energy

S = SPP D = DUN

OBS421Bluetooth Smart Ready modules16.0 x 36.0 x 2.6 mm

OLS425 / OLP425Bluetooth Smart modules14.8 x 22.3 x 2.9 mm


Cla

ssic

Blu

etoo

th

Blue

toot

h lo

w e

nerg

y

Wi-F

i 2.4

GH

z ch

anne

ls 1

-13

Wi-F

i 5 G

Hz

chan

nels

36-

165

NFC

Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Low

Ene

rgy

Seria

l Por

t Se

rvic

e

Wi-F

i IEE

E 80

2.11

ver

sion

Max

out

put

pow

er in

clud

ing

ante

nna

/ at

ante

nna

pad

Max

ran

ge

Ant

enna

typ

e

LTE

co-lo

catio

n fil

ter

UA

RT

SDIO

RMII

PCM

(Blu

etoo

th a

udio

)

Supp

ly: 1

.8 a

nd 3

.3 V

Supp

ly: 3

.0 -

3.6

V

Sold

er p

ads

Embe

dded

MC

U

AT

com

man

d su

ppor

t

Mic

ro A

cces

s Po

int

AES

har

dwar

e su

ppor

t

And

roid

con

nect

ivity

iOS

conn

ectiv

ity

RF p

aram

eter

s in

OTP

mem

ory

MA

C a

ddre

sses

in O

TP m

emor

y

Stan

dar

d

Pro

fess

ion

al

Au

tom

oti

ve

Multiradio (Wi-Fi + Bluetooth + NFC) host-based modules

EMMY-W161 • • • • • v4.1 Ha/b/g/n/

ac18 dBm 1p • • • • • • • • • W/LE • •

EMMY-W163 • • • • • v4.1 Ha/b/g/n/

ac18 dBm 2p • • • • • • • • W/LE • •

Multiradio (Wi-Fi + Classic Bluetooth) host-based modules

ELLA-W131 • • v3.0+HS H b/g/n 18 dBm 1p • • • • • • • W • • T

ELLA-W133 • • v3.0+HS H b/g/n 18 dBm 2p • • • • • • • W • •

ELLA-W161 • • • v3.0+HS H a/b/g/n 18 dBm 1p • • • • • • • W • •

ELLA-W163 • • • v3.0+HS H a/b/g/n 18 dBm 2p • • • • • • • W • •

Multiradio (Wi-Fi + Bluetooth) stand-alone modules

ODIN-W260 • • • • v4.0 SDPG • a/b/g/n 19 dBm E • • • • • • • • • W/LE • •

ODIN-W262 • • • • v4.0 SDPG • a/b/g/n 16 dBm I • • • • • • • • • W/LE • •

Multiradio (Wi-Fi + Bluetooth) host-based modules

ODIN-W160 • • • • v4.0 H a/b/g/n 19 dBm 500 m E • • • • • • • W/LE • •

1p = One external antenna pad for combined Bluetooth and Wi-Fi2p = Two external antenna pads, one each for Bluetooth and Wi-Fi

E = U.FL connector(s) for external antenna I = Internal antenna

LE = Bluetooth low energy W = Wi-FiT = in combination with TOBY-L2

H = HCI S = SPP D = DUN

P = PANG = GATT

ODIN-W1 / W2 seriesMultiradio modules14.8 x 22.3 x 2.9 mm

Model Standard Specs Radio Interfaces Power Connectors Features Grade

Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Low

Ene

rgy

Seria

l Por

t Se

rvic

e

Ant

enna

typ

e

Max

out

put

pow

er in

cl. a

nten

na

Max

ran

ge

UA

RT

SPI a

nd I2 C

GPI

O p

ins

AD

con

vert

ers

Pow

er s

uppl

y: 2

.0 -

3.6

V

Cur

rent

con

sum

ptio

n (id

le)

Ultr

a lo

w p

ower

Sold

er p

ads

JST

conn

ecto

r

4 th

ru-h

ole

sold

er p

oint

s fo

r se

nsor

s

Thro

ughp

ut

AT

com

man

d su

ppor

t

Max

num

ber

of s

lave

s

Cus

tom

er a

pplic

atio

n pl

atfo

rm

And

roid

con

nect

ivity

iOS

conn

ectiv

ity

Tem

pera

ture

sen

sor

Acc

eler

omet

er

Red

and

gree

n LE

Ds

Stan

dard

Prof

essi

onal

Aut

omot

ive

OLS425i-04 v4.0 • I 3 dBm 50 m • 11 • 0.4 μA • • 26 kbps • 1 • •OLS425x-04 v4.0 • E 6 dBm 200 m • 11 • 0.4 μA • • 26 kbps • 1 • •OLP425i-04 v4.0 G I 3 dBm 50 m • • 18 4 • • • 3 • • •OLP425x-04 v4.0 G E 6 dBm 200 m • • 18 4 • • • 3 • • •OLP425i-16 v4.0 G I 3 dBm 50 m • • 18 4 • • • • 3 • • • • • •OLP425x-16 v4.0 G E 6 dBm 200 m • • 18 4 • • • • 3 • • • • • •


OLS425/OLP425 Stand-alone Bluetooth low energy module series

Highlights

• Bluetooth v4.0 with Bluetooth low energy (Bluetooth Smart)

• Serial port application firmware for UART serial data

• MCU for customer developed applications

• GPIO / SPI / I2C / UART interface

• Options for integrated sensors and LEDs

• u-blox Low Energy Serial Port Service

• Apple iOS and Google Android connectivity

Product descriptionThe stand-alone Bluetooth low energy (Bluetooth Smart) modules OLS425 and OLP425 are compact modules that support ultra low power consumption and are suitable for applications using coin cell batteries. They come complete with embedded Bluetooth stack and offer solder castella-tions for visual inspection as well as Apple iOS and Google Android connectivity.

The OLS425 embeds firmware with the u-blox Low Energy Serial Port Service for replacing serial cables or accessing UART devices using Bluetooth low energy technology.

The OLP425 is tailored for those who wish to embed a customer developed application and/or Bluetooth services/attributes on top of the integrated software stack and tools. The stack and tools include object code with the latest Bluetooth low energy protocol stack supporting

Product selector

multiple connections, sample projects and applications covering an extensive set of profiles with source code. The OLP425 is a stand-alone product with no addition-al hardware required since it offers several mounting options including temperature sensor, accelerometers and LEDs. The OLP425 sample code package includes sample projects for accessing the LEDs, temperature sensor and accelerometers. The OLP425 offers GPIO, SPI, I2C, and UART interfaces as well as analog inputs.

The modules are fully Bluetooth qualified and providemodular radio type approvals for the US, Europe, Japan and Canada (FCC, R&TTE, MIC, IC). They are also compliant with EMC, Safety and Medical standards. The operating temperature range is –40°C to +85°C.

OLS425:14.8 x 22.3 x 2.8 mm

E = External antenna I = Internal antennaG = GATT



SHO

RT

RA

NG

E

Package

Dimensions 14.8 x 22.3 x 3.2 mm (int. antenna,) 14.8 x 22.3 x 2.8 mm (ext. antenna) 14.8 x 22.3 x 4.2 (JST connector)

Weight 1.5 g

Mounting Mounting holes Machine mountable Solder edge pads with castellations

Electrical data

Power supply 2.0 to 3.6 VDC

Power 0.4 μA @ 2.0 V (min.) consumption 10 mA @ 2.0 V (average Tx)2


Operating temp. –40°C to +85°C (JST version: –25°C to +85°C)


Type approvals Europe (ETSI R&TTE) US (FCC/CFR 47 part 15 unlicensed modular transmitter approval) Canada (IC RSS) Japan (MIC - formerly TELEC)

Medical Electrical Equipment IEC 60601-1-2

Bluetooth Qualification v4.0

Support products

EVK-OLS425 evaluation kit cB-OLS426i-04-B Includes OLS425i-04 module on adapter board, USB module adapter (installs virtual COM-port), USB extension cable, configuration software

EVK-OLP425 evaluation kit cB-OLP425i-26-A Includes OLP425i-16 module with CR1632 battery holder, CC debugger adapter board, JST/JST crossover cable



Features

Bluetooth v4.0 (Bluetooth low energy)

Range 50 m, internal antenna 200 m, external antenna

Output power 3 dBm, internal antenna 6 dBm, external antenna

Receive sensitive level –91 dBm

Throughput 26 kbps (max)

Temperature Accuracy 0.5°C (max) from sensor1 0°C to +65°C (optional) Accuracy 1.0°C (max) from –40°C to +125°C

Accelerometer1 ±2g/±4g/±8g/±16g dynamically (optional) selectable. 2 independent programmable interrupt generators for free-fall and motion detection 6D/4D orientation detectionOther sensors1 4 pcs through hole solder points for other sensors (2 GPIO or 1 ADC)

Software features

Embedded Bluetooth stack software Serial port application2 Customer implemented Bluetooth low energy profiles, services & attributes1

GATT based u-blox Low Energy Serial Port Service2 service

Profile roles OLS425: Peripheral Role OLP425: Central Role, Peripheral Role

Max. number OLS425: 1 of slaves OLP425: 3

Configuration AT commands tools2 Serial Port Toolbox (Windows-based SW)

Development IAR Embedded Workbenchenvironment1 for 8051 (not included)

Security Simple Pairing

Android connectivity

iOS connectivity

Interfaces

SPI 1, I2C 1, UART logic level

Supported OLS425: 57.6 kbps (max.) baud rate OLP425: 115.2 kbit/s (max.)

Flow control CTS/RTS (hardware) or none

GPIO pins OLS425: 11. OLP425:18.

ADC channels 1 4

LEDs 1 2 (optional red and green LEDs)

U.FL antenna connector (external antenna version only)

1 Applies to OLP425 only2 Applies to OLS425 only

Standard



OBS421 Stand-alone dual-mode Bluetooth module

Highlights• Bluetooth v4.0 with Bluetooth low energy and

Classic Bluetooth (Bluetooth Smart Ready)

• Embedded stack (SPP, DUN, PAN, GATT)

• Cortex M3 MCU for customer developed applications


• High throughput of 1.3 Mbps

• Advanced multipoint capability with 7 slaves

• Apple iOS and Google Android connectivity

Product descriptionThe powerful stand-alone Bluetooth module OBS421 is a dual-mode (Bluetooth Smart Ready) module complete with embedded Bluetooth stack and serial port applica-tion. The OBS421 features a UART interface for transpar-ent serial data transmissions. It can be used as a Bluetooth Smart Ready client for any host and it can access any Bluetooth Smart device that implements services based on the Generic Attribute Profile(GATT), such as a low energy battery service or an automation I/O service.

The OBS421 can also be used in applications where a smartphone, tablet or laptop is to connect to a serial device such as a Programmable Logic Controller (PLC).

Customers may embed their own applications, eliminating the need of an external application processor, thus saving

Product selector

considerably on the bill of material and PCB space. The middleware with easy-to-use interfaces speeds up and simplifies application development. Customer developed applications can make use of the additional module in-terfaces, such as GPIO, SPI, I2C, JTAG, and UART / USART and analog inputs.

The module is fully Bluetooth qualified and provides modular radio type approvals for the US, Europe, Japan and Canada (FCC, R&TTE, MIC, IC). The OBS421 is also compliant with EMC, Safety and Medical standards.

The robust module is easily configured via AT commands as well as cover a range of 300 meters, throughput up to 1.3 Mbps and operating temperatures of –30°C to +85°C.

OBS421:16.0 x 36.0 x 2.6 mm

LE = Bluetooth Low Energy S = SPP P = PAND = DUN G = GATT

* Applies to product with standard serial port application (not customer developed application)


Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Low

Ene

rgy

Seria

l Por

t Se

rvic

e

Ant

enna

typ

e

Max

out

put

pow

er in

cl. a

nten

na

Max

ran

ge

UA

RT

SPI a

nd I2 C

GPI

O p

ins

AD

con

vert

ers

Pow

er s

uppl

y: 3

.0 -

6.0

V

Cur

rent

con

sum

ptio

n (id

le)

Ultr

a lo

w p

ower

Boar

d-to

-boa

rd

Sold

er p

ads

Thro

ughp

ut

AT

com

man

d su

ppor

t

Max

num

ber

of s

lave

s

Exte

nded

Dat

a M

ode

prot

ocol

Cus

tom

er a

pplic

atio

n pl

atfo

rm

And

roid

con

nect

ivity

iOS

conn

ectiv

ity

Stan

dard

Prof

essi

onal

Aut

omot

ive

OBS421i-24* v4.0 SDPG • I 11 dBm 250 m • 9 • 0.6 mA • • 1.3 Mbps • 7 • • LE

OBS421x-24* v4.0 SDPG • E 13 dBm 300 m • 9 • 0.6 mA • • 1.3 Mbps • 7 • • LE

OBS421i-i4 v4.0 SDPG • I 11 dBm 250 m • 9 • 0.6 mA • • 1.3 Mbps • 7 • • •OBS421x-i4 v4.0 SDPG • E 13 dBm 300 m • 9 • 0.6 mA • • 1.3 Mbps • 7 • • •OBS421i-24 for customer apps

v4.0 SDG • I 11 dBm 250 m • • 21 7 • 0.6 mA • • 1.3 Mbps • 7 • • • LE

OBS421x-24 for customer apps

v4.0 SDG • E 13 dBm 300 m • • 21 7 • 0.6 mA • • 1.3 Mbps • 7 • • • LE

E = External antennaI = Internal antenna



SHO

RT

RA

NG

E

Package

Dimensions 16.0 x 36.0 x 3.2 mm (int. antenna) 16.0 x 36.0 x 2.6 mm (ext. antenna)

Weight 2 g

Mounting Mounting holes, Machine mountable, Board-to-board connector, Solder land pads

Electrical data


Power 0.6 mA @ 3.0 V (min.) consumption 44 mA @ 3.0 V (average Tx)2


Operating temperature –30°C to +85°C





Support products

EVK-OBS421 Evaluation KitcB–OBS421i–26–B Includes OBS421i-24 module with additional JST connector, USB module adapter (installs virtual COM- port), USB extension cable, JST to flying leads cable, configuration SW.

Kit for customer developed applicationscB-WDK-12-A SDK for customer developed applications, platform development board ACC-56, OBS421i-24, OBS421x-24 modules with additional JST connector, external antenna, USB module adapter ACC-34. Support not included. SLA must be signed.



Features

Bluetooth v4.0 (Bluetooth low energy and Classic Bluetooth)

Range 250 / 300 m (internal / external antenna)

Output power 11 / 13 dBm (internal / external antenna)

Throughput Max 1.3 Mbps (Classic Bluetooth)

Microprocessor 72 MHz, ARM® 32-bit Cortex M3 capacity processor, 64 kB RAM & 384 kB flash

Software features

Embedded u-blox Bluetooth stack software Serial port application1

Bluetooth u-blox Low Energy Serial Port Service profiles & GATT services SPP DUN GW, DUN DT PAN roles: PANU & NAP1

Profile roles Central Role, Peripheral Role

Max. number 7 Classic Bluetooth only of slaves 3 Classic & Bluetooth low energy

Configuration AT commands via Bluetooth / serial port tools Serial Port Toolbox (Windows-based SW)

Low EmissionMode® Prevent disrupting other 2.4GHz radios

Wireless For simultaneous connections to Multidrop™ Bluetooth low energy and Classic Bluetooth devices

Extended Data Individually controlled multipoint data Mode™ channels 1

Repeater Extended range1



iOS connectivity Supports Bluetooth low energy & Classic Bluetooth 1 connections with iOS devices*

Interfaces

UART Logic level

RS232/RS422/RS485 option via external transceiver

Baud rate Max 1.5 Mbit/s Support for non-standard baud rates


GPIO pins 9 pins / 21 pins 2

SPI, I2C, USART Logic level 2

ADC channels 2 7


1 Not applicable when used with customer developed application2 Only applicable when used with customer developed application

Standard



OBS418/OBS419 Stand-alone Classic Bluetooth module series

Highlights

• Bluetooth v2.1 / v2.1 + EDR

• Embedded Bluetooth stack

• Serial port application firmware for UART serial data

• Up to 1 Mbps throughput

• Advanced multipoint capability with up to three slaves

• u-blox Low Emission Mode®

Product descriptionThe OBS418 and OBS419 are stand-alone Classic Blue-tooth modules with UART logic level interface for fast, secure, and transparent serial data transmissions up to 150 meters. With the embedded Bluetooth stack, you can be up and running quickly as there is no need for a driver or stack in your host.

The modules are easily configured via AT commands, offer Google Android connectivity and have implemented the u-blox Low Emission Mode® to make sure that Classic Bluetooth operates smoothly in parallel with other wireless technologies.

The OBS418 features Bluetooth v2.1 (SPP, DUN), 350 kbps throughput, and one-slave connectivity.

Product selector

The OBS419 features Bluetooth v2.1+EDR (SPP, DUN, PAN), deep power save mode, 950 kbps throughput, and three-slave multipoint connectivity. Further features implemented include Wireless Multidrop™ and Extended Data Mode™ for individually controlled multipoint data channels.

Options include internal antenna versions or versions with connector for external antenna. There is also a wide selec-tion of certified external antennas to choose from.

The modules are fully Bluetooth qualified and provide modular radio type approvals for the US, Europe, Japan and Canada (FCC, R&TTE, MIC, IC). The modules are also compliant with EMC, Safety and Medical standards.

The operating temperature range is –30°C to +85°C.

OBS419:16.0 x 36.0 x 2.6 mm

E = External antennaS = SPP


Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Ant

enna

typ

e

Max

out

put

pow

er in

cl. a

nten

na

Max

ran

ge

UA

RT

GPI

O p

ins

Pow

er s

uppl

y: 3

.0 -

6.0

V

Cur

rent

con

sum

ptio

n (id

le)

Boar

d-to

-boa

rd

Sold

er p

ads

Thro

ughp

ut

AT

com

man

d su

ppor

t

Max

num

ber

of s

lave

s

Exte

nded

Dat

a M

ode

prot

ocol

And

roid

con

nect

ivity

Stan

dard

Prof

essi

onal

Aut

omot

ive

OBS418i-04 v2.1 SD I 6 dBm 75 m • 9 • 12 mA • • 350 kbps • 1 •OBS418x-04 v2.1 SD E 8 dBm 150 m • 9 • 12 mA • • 350 kbps • 1 •OBS419i-04 v2.1+EDR SDP I 6 dBm 75 m • 9 • 0.6 mA • • 950 kbps • 3 • •OBS419x-04 v2.1+EDR SDP E 8 dBm 150 m • 9 • 0.6 mA • • 950 kbps • 3 • •


I = Internal antennaD = DUN P = PAN


SHO

RT

RA

NG

E

Package

Dimensions 16.0 x 36.0 x 3.2 mm (internal antenna) 16.0 x 36.0 x 2.6 mm (external antenna)

Weight 2 g

Mounting Mounting holes Machine mountable Board-to-board connector Solder land pads

Electrical data


Power OBS418: 12 mA @ 3.0 V (min.) consumption OBS419: 0.6 mA @ 3.0 V (min.) 20 mA @ 3.0 V (average Tx)






Bluetooth Qualification OBS418: v2.1 OBS419: v2.1 + EDR

Support products

EVK-OBS419 Evaluation Kit

cB-OBS419i-06-B Includes the OBS419i-04 module with additional JST connector, USB module adapter (installs virtual COM- port), USB extension cable, JST to flying leads cable, and configuration software. To evaluate the OBS418, order the module separately.



Features

Bluetooth OBS418: v2.1 (Classic Bluetooth OBS419: v2.1 + EDR (Classic Bluetooth)

Range 75 m, internal antenna 150 m, external antenna

Output power 6 dBm, internal antenna 8 dBm, external antenna

Throughput OBS418: 350 kbps OBS419: 950 kbps

Software features

Embedded u-blox Bluetooth stack software Serial port application

Bluetooth OBS418/419: Serial Port Profile (SPP) profiles & OBS418/419: Dial-up networking services Profile (DUN GW, DUN DT) OBS419: Personal Area Networking Profile (PAN) roles: PANU & NAP

Max. number OBS418: 1 of slaves OBS419: 3

Configuration AT commands via Bluetooth / serial port tools Serial Port Toolbox (Windows-based SW)

Low Emission Prevent disrupting other 2.4GHz radiosMode®

Wireless Possible with simultaneous connections Multidrop 1 to several devices without adding software to the host system

Extended Data Individually controlled multipoint data Mode 1 channels

Repeater Extended rangefunctionality 1


Android SPP Classic Bluetooth with Android connectivity devices (Android 4.3 and higher)

1 Applies to OBS419 only

Interfaces

UART Logic level

RS232 (option via external transceiver)

RS422/485 (option via external transceiver)

Baud rate OBS418: 460.8 kbit/s (max.) OBS419: 1.25 Mbit/s (max.) Support for non-standard baud rates


GPIO pins 9


Standard


I = Internal antenna


ODIN-W16 series Host-based multiradio module series with Wi-Fi & Bluetooth

Highlights

• Dual-band Wi-Fi 2.4 GHz & 5 GHz

• Dual-mode Bluetooth v4.0 with Bluetooth low energy and Classic Bluetooth (Bluetooth Smart Ready)

• Open source Linux driver

• RF parameters & MAC address stored in EEPROM

• Fully certified with the U.FL antenna connector

Product description

The host-based multiradio module series ODIN-W16 is ready-to-embed for demanding industrial, vehicle, medi-cal, and security applications.

The ODIN-W16 compact 15 x 22 x 3 mm modules support dual-band IEEE 802.11 a, b, g, n on 2.4 GHz and 5GHz channels 36-165 (U-NII bands 1, 2, 2e, 3), as well as dual-mode Bluetooth v4.0, which includes Bluetooth low energy and Classic Bluetooth (Bluetooth “Smart Ready”).

The host-based modules are designed for a long life cycle and ultra-low power consumption. Together with the open-source Linux host driver, the modules minimizes development time to implement short range wireless com-munications in end-devices. Also, no trimming or tuning is required during manufacturing of customer end-devices,

Product selector

since the modules have pre-calibrated radio parameters and MAC address stored in on-board EEPROM.

The module series is in a castellated package improving visual inspection of end-devices. The modules vary in their implementation of antennas and connectors; for instance, ODIN-W160 has a U.FL antenna connector for a wide selection of certified antennas.

The series provide modular radio type approvals for Eu-rope, US and Canada (R&TTE, FCC, IC), EMC certification, and Bluetooth qualification. Additionally, the modules support ad-hoc, infrastructure and AP mode as well as security features WEP64, WEP128, WPA, WPA2, and TKIP & AES hardware accelerator.

The operating temperature range is –40°C to +85°C.

ODIN-W160:14.8 x 22.3 x 2.9 mm

LE = Bluetooth Low Energy Sec = WPA2, Enterprise, EAP-TLS

B = BluetoothW = WLAN / Wi-Fi

E = External antennaH = HCI


Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

WLA

N IE

EE 8

02.1

1 ve

rsio

n

Ant

enna

typ

e

Max

out

put

pow

er in

cl. a

nten

na

Max

ran

ge

2.4

GH

z ch

anne

ls 1

-13

5 G

Hz

chan

nels

36-

165

UA

RT

SDIO

Pow

er s

uppl

y: 3

.0 -

3.6

V

Sold

er p

ads

And

roid

con

nect

ivity

iOS

conn

ectiv

ity

Wi-F

i Sec

urity

RF p

aram

eter

s in

EEP

ROM

5MA

C a

ddre

sses

in E

EPRO

M

Stan

dard

Prof

essi

onal

Aut

omot

ive

ODIN-W160 v4.0 H a,b,g,n E 19 dBm 500 m • • B W • • • W/LE Sec • •



SHO

RT

RA

NG

E

Features

Wi-Fi IEEE 802.11 a, b, g, single-stream n (65 Mbps), d, e, h, i, k, r, s 2.4 GHz channels: 1-13 5 GHz channels: 36-165 (U-NII Band 1, 2, 2e, 3)

Bluetooth v2.1+EDR (Classic) up to HCI layer v4.0 (low energy) up to HCI layer

Range 500 m

Output power 19 dBm

Software features

RF parameters Available in on-board EEPROM

MAC addresses Available in on-board EEPROM

Security WEP64/128 WPA-EAP-TLS, WPA-PSK WPA2-EAP-TLS, WPA2-PSK TKIP and AES hardware accelerator

Operational Infrastructure (BSS) modes Ad-hoc (IBSS) Software AP (DFS channels excluded)

Driver support Open-source Linux driver

Advanced power management

Internal support for Wi-Fi and Bluetooth co-existence


iOS connectivity (Wi-Fi and Bluetooth low energy)

Interfaces

Wi-Fi SDIO

Bluetooth UART

RF parameters I2C

MAC addresses I2C

U.FL antenna connector

Electrical data

Power supply 3.0 - 3.6 VDC

I/O power supply 1.75 - 1.9 VDC

Power consumption TBD

Package

Dimensions 14.8 x 22.3 x 2.9 mm

Weight 1.5 g

Mounting Solder edge pads with castellations (visually inspectable)


Operating temp. –40° C to +85° C


Type approvals Europe (ETSI R&TTE) US (FCC/CFR 47 part 15 unlicensed modular transmitter approval) Canada (IC RSS) Japan (MIC - formerly TELEC) in progress

Medical Electrical Equipment EC 60601-1-2

Bluetooth Qualification v4.0 (controller subsystem)

Support products

EVK-W16 Evaluation kit for ODIN-W160


See datasheet

Standard


ODIN-W2 seriesStand-alone multiradio modules with Wi-Fi and Bluetooth

Coming extensions of the module firmware include micro Access Point, high speed interfaces like RMII, and support for custom embedded applications. Using Blue-tooth low energy the module will also be able to access any Bluetooth Smart device that implements services based on the Generic Attribute Profile (GATT), such as a low energy battery service or an automation I/O service.

The module is professional grade with an extended op-erating temperature range. The radio type approvals for US, Europe, Japan and Canada simplifies and shortens the integration work.

Example use cases: Wi-Fi and Bluetooth serial cable replacement Wi-Fi and Bluetooth serial/terminal server* Wi-Fi and Bluetooth access point* Gateway between Wi-Fi and Bluetooth*

Product description

The ODIN-W2 is a compact yet powerful stand-alone multiradio module, designed for Internet-of-Things applications. The module is complete with embedded driver, stack and application for wireless data transfer and AT-command configuration. The wireless support includes dual-mode Bluetooth v4.0 (classic Bluetooth and Bluetooth low energy), plus dual-band Wi-Fi (2.4 GHz and full 5 GHz band).

The module can be used as a point-to-point serial cable replacement. It also supports multiple concurrent Blue-tooth and Wi-Fi connections that can operate in Wire-less Multidrop or Extended Data Mode for advanced multipoint capabilities. The ODIN-W2 can also be used in applications where a smartphone, tablet or laptop is to connect to a serial device such as a Programmable Logic Controller (PLC).

Highlights

• Dual-band Wi-Fi 2.4 & 5 GHz

• Dual-mode Bluetooth v4.0 (Bluetooth Smart Ready)

• Concurrent multiradio connections

• Embedded Wi-Fi driver, Bluetooth stack, and application

• IPv4 and limited IPv6*

• Micro access point*

• RMII for Ethernet*

• Enterprise security

Product selector

ODIN-W262:14.8 x 22.3 x 4.5 mm




Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Low

Ene

rgy

Seria

l Por

t Se

rvic

e

Wi-F

i IEE

E 80

2.11

(a/b

/g/n

**)

Max

out

put

pow

er in

cl. a

nten

na

Max

ran

ge, i

n m

eter

s

2.4

GH

z ch

anne

ls 1

-13

5 G

Hz

chan

nels

36-

165

Ant

enna

typ

e

UA

RT

RMII*

Pow

er s

uppl

y: 3

.0 -

3.6

V

Sold

er p

ads

Blue

toot

h th

roug

hput

(Mbp

s)

Wi-F

i thr

ough

put

(Mbp

s)

AT

com

man

d su

ppor

t

Exte

nded

Dat

a M

ode

prot

ocol

And

roid

con

nect

ivity

iOS

conn

ectiv

ity

Wi-F

i Sec

urity

Stan

dard

Prof

essi

onal

Aut

omot

ive

ODIN-W260 v4.0 SDPG • • 19 dBm TBD • • E • • • • 1.3 TBD • • • W/LE Sec

ODIN-W262 v4.0 SDPG • • 16 dBm TBD • • I • • • • 1.3 TBD • • • W/LE Sec

S = SPPD = DUN

P = PAN*G = GATT*

E = U.FL connector(s) for external antennaI = Internal antenna for Bluetooth and Wi-Fi

Sec = WPA2, Enterprise, EAP-TLS*LE = Bluetooth low energyW = WLAN / Wi-Fi

** = available in firmware 2.0** = available in firmware 3.0

Standard



SHO

RT

RA

NG

E

Features

Wi-Fi standards IEEE 802.11 a, b, g, n** IEEE 802.11 d, e, i, h

Wi-Fi channels 2.4GHz: 1-13 5 GHz: 36-165 (U-NII Band 1, 2, 2e, 3)

Wi-Fi maximum IEEE 802.11n** (20 MHz channel): transfer rates MCS 0-7 (SISO): 72 Mbps MCS 8-15 (MIMO): 144 Mbps IEEE 802.11a/g: 54 Mbps IEEE 802.11b: 11 MbpsWi-Fi MIMO 2x2 MIMO** (external antenna version only)

Bluetooth v4.0 (Bluetooth low energy and Classic Bluetooth with EDR)

Antenna Internal antenna or dual U.FL connectors for external antennas

Output power Internal/external antenna: Wi-Fi: 16/19 dBm Classic Bluetooth: 10/13 dBm Bluetooth low energy: 7/10 dBm

Software features

Embedded software u-blox Wi-Fi driver u-blox Bluetooth stack Serial port application Combined IPv4 and limited IPv6* stack

Wi-Fi Security WEP 64/128 WPA and WPA2 TKIP and AES/CCMP hardware accelerator LEAP, PEAP, EAP-TLS*Wi-Fi operational μAP* (DFS channels excluded)modes Station, 10 different SSIDs can be configured for roaming between different networks

Bluetooth profiles u-blox Low Energy Serial Port Serviceand services GATT* SPP DUN PAN* roles: PANU & NAP Low energy roles: Central, Peripheral

Max. number of 7 Bluetooth + multiple TCP/UDP connections

Wireless Multidrop™ for concurrent connections to Wi-Fi, Classic Bluetooth and Bluetooth Low Energy

Extended Data Mode™ for individually controlled multipoint data channels

Repeater mode for hostless gateway functionality between different technologies or extended range*


iOS connectivity (Wi-Fi and Bluetooth low energy only)



Package

Dimensions 14.8 x 22.3 x 4.5 mm (internal antenna) 14.8 x 22.3 x 3.0 mm (external antenna)


Interfaces

UART

RMII*

2 U.FL antenna connectors (external antenna version only)

Support products

EVK-W262U Evaluation kit with USB for ODIN-W262



R&TTE Directive Effective use of frequency spectrum1999/5/EC EN 300 328 EMC EN 301 489-1, EN 301 489-17, EN 61000-6-2 Health & Safety Compliance: EN 62479, EN 60950-1, IEC 60950-1



Product variants

ODIN-W260 Module with dual U.FL connectors for external antennas for MIMO** support

ODIN-W262 Module with internal antenna

Electrical data

Power supply 3.0 - 3.6 VDC

Power consumption TBD

Further information

For contact information, see www.u-blox.com/contact-us.

For more product details and ordering information, see the product data sheet.

** = available in firmware 2.0** = available in firmware 3.0


EMMY-W1 Host-based multiradio modules with Wi-Fi, Bluetooth & NFC

Highlights

• Automotive grade

• Dual-band Wi-Fi with IEEE 802.11 ac

• Dual-mode Bluetooth v4.1 (Bluetooth Smart Ready)

• NFC

• Simultaneous client and micro access point operation

• Integrated LTE co-location filter

Product descriptionEMMY-W1 is an ultra-compact, automotive-grade multiradio module providing Wi-Fi, Classic Bluetooth, Bluetooth low energy, NFC, with an extended temper-ature range from -40 °C to +85 °C. It is designed for both simultaneous and independent operations of:

• Wi-Fi IEEE 802.11ac and a/b/g/n• Dual-mode Bluetooth v4.1• NFC

EMMY-W1 is an SMD component and provides a complete wireless modem solution that can easily be integrated into the application. The RF module can be connected to a host processor through SDIO or High-Speed UART interface. The module is radio-type approved for Europe (CE), the United States (FCC) and Canada (IC).

Product selector

1p = One external antenna pad for combined Bluetooth and Wi-Fi 2p = Two external antenna pads, one each for Bluetooth and Wi-FiH = HCI



Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Wi-F

i IEE

E 80

2.11

ver

sion

Max

out

put

pow

er a

t an

tenn

a pa

d

2.4

GH

z W

i-Fi c

hann

els

1-13

5 G

Hz

Wi-F

i cha

nnel

s 36

-165

Ant

enna

typ

e

LTE

coex

iste

nce

filte

r

SDIO

3.0

Hig

h-sp

eed

UA

RT

PCM

(Blu

etoo

th a

udio

)

Pow

er s

uppl

y: 3

.0-3

.6 V

Sold

er p

ads

Mic

ro A

cces

s Po

int

AES

har

dwar

e su

ppor

t

RF p

aram

eter

s in

OTP

mem

ory

MA

C a

ddre

sses

in O

TP m

emor

y

Stan

dard

Prof

essi

onal

Aut

omot

ive

EMMY-W161-A v4.1 H a/b/g/n/ac 18 dBm • • 1p • • • • • • • • • •

EMMY-W163-A v4.1 H a/b/g/n/ac 18 dBm • • 2p • • • • • • • • •

Key features:• Wi-Fi Standards IEEE 802.11a/b/g/n/ac

• Support of Wi-Fi direct mode

• IEEE 802.11 PHY data rates of up to 433 Mbps

• Suitable for HD video streaming


• Hardware encryption engine for 64/128-bit AES

• WAPI support

• Bluetooth v4.1 with Bluetooth low energy and Classic Bluetooth

• PCM interface for audio

• Automotive qualification tests (climatic, mechanical, and operating life tests) according to VW 80000 / ISO 16750-4

EMMY-W1:13.8 x 19.8 x 2.5 mm


SHO

RT

RA

NG

E

Standard


Features

Wi-Fi standards IEEE 802.11 a , b, g, n, ac IEEE 802.11 d, e, h, i, k, r, v, w

Wi-Fi transfer rates IEEE 802.11n, ac: max.433 Mbps (80 MHz channel) max 200 Mbps (40 MHz channel) max. 86 Mbps (20 MHz channel) IEEE 802.11g: 54,48,36,24,18,12,9,6 Mbps

IEEE 802.11b: 11, 5.5, 2, 1 Mbps

Bluetooth v4.1 (Bluetooth low energy and Classic Bluetooth with EDR)

Frequency range Bluetooth/Wi-Fi: 2.4-24835 GHz Wi-Fi: 5.15-5.825 GHz NFC: 13.56 MHz

Antenna 1 combined or 2 separate antenna solder pads for Bluetooth and Wi-Fi 2 antenna solder pads for NFC

LTE co-location Integrated BAW LTE filter on the version with 1 combined antenna solder pad 2-wire UART LTE interface

Output power Wi-Fi IEEE 802.11 b: 18 dBm Wi-Fi IEEE 802.11 a/g/n/ac: 15 dBm Bluetooth: 8 dBm

Software features

RF parameters Available in on-board OTP memory

MAC addresses Available in on-board OTP memory

Security WEP64/128

WPA (TKIP, AES)

WPA2 (CCMP, AES) WAPI 64/128 bit AES hardware support

Wi-Fi operational Station (STA): Infrastructure & ad-hoc mode modes μAP: Supports up to 10 stations Wi-Fi direct One single firmware for Wi-Fi STA, μAP and Bluetooth

Driver support Free of charge driver for Linux 3.x

Wi-Fi / Bluetooth Internal TDM mechanism coexistence

Interfaces

Wi-Fi SDIO 3.0 (4-bit, up to 208 MHz clock)

Bluetooth SDIO 3.0 (4-bit), High-speed UART

Bluetooth audio PCM

NFC SDIO 3.0, UART

Package


Mounting Solder pads (LGA)



Automotive qualification according to VW 80000 / ISO 16750-4

Support products

The EMMY-W1 evaluation kits include an evaluation board with full access to the module interfaces. The board has an onboard NFC antenna and SMA connectors for connecting external Wi-Fi and Bluetooth antennas. The board offers a standard SDIO connector for host communication.

EVK-EMMY-W161-A Evaluation kit for EMMY-W161-A

EVK-EMMY-W163-A Evaluation kit for EMMY-W163-A


Europe (ETSI R&TTE)

US (FCC CFR 47 part 15 unlicensed modular transmitter approval)

Canada (IC RSS)

Electrical data

RF power supply 3.0-3.6 VDC

I/O power supply 3.3 VDC or 1.8 VDC

Power consumption 900 mW

Product variants

EMMY-W161-A Module with 1 combined antenna solder pad for Wi-Fi and Bluetooth and integrated LTE filter

EMMY-W163-A Module with 2 separate antenna solder pads for Wi-Fi and Bluetooth (no LTE filter)

Note: EMMY-W1 series was formerly known as Lesswire WiBear 11ac

Further information




ELLA-W1 series Host-based multiradio modules with Wi-Fi & Bluetooth

Highlights

• Automotive grade

• Dual-band Wi-Fi 2.4 & 5 GHz

• Bluetooth v3.0 + HS

• High transmission power and sensitivity

• Simultaneous client and micro access point operation


Product descriptionELLA-W1 is an ultra-compact, automotive-grade Wi-Fi & Bluetooth front-end module with an extended tem-perature range from -40 °C to +85 °C. It is designed for both simultaneous and independent operations of:

• Wi-Fi 802.11a/b/g/n• Bluetooth v3.0+HS

ELLA-W1 provides a complete end-to-end solution for low-power applications. It includes an integrated MAC / Baseband processor and RF front-end components and can connect to a host processor through its SDIO inter-face. The modules are radio type approved for Europe (CE), the United States (FCC) and Canada (IC).

Product selector


Key features:• Wi-Fi standards IEEE 802.11a/b/g/n


• Support of Wi-Fi direct mode

• 802.11 PHY data rates up to 150 Mbps (40 MHz channel)

• Hardware encryption engine for 64/128-bit AES

• WAPI support

• Bluetooth v3.0+HS (High Speed)

• Driver support for Linux and Android

• Automotive qualification tests according to VW 80000 / ISO 16750-4

ELLA-W1:14.8 x 14.8 x 2.5 mm


Blue

toot

h qu

alifi

catio

n

Blue

toot

h pr

ofile

s

Wi-F

i IEE

E 80

2.11

ver

sion

Max

out

put p

ower

at a

nten

na p

ad

2.4

GH

z ch

anne

ls 1

-13

5 G

Hz

chan

nels

36-

165

Ant

enna

typ

e

SDIO

PCM

(Blu

etoo

th a

udio

)

Pow

er s

uppl

y: 1

.8 a

nd 3

.3 V

Sold

er p

ads

Mic

ro A

cces

s Po

int

AES

har

dwar

e su

ppor

t

RF p

aram

eter

s in

OTP

mem

ory

MA

C a

ddre

sses

in O

TP m

emor

y

Stan

dard

Prof

essi

onal

Aut

omot

ive

ELLA-W131-A v3.0+HS H b/g/n 18 dBm • 1p • • • • • • • •

ELLA-W133-A v3.0+HS H b/g/n 18 dBm • 2p • • • • • • • •

ELLA-W161-A v3.0+HS H a/b/g/n 18 dBm • • 1p • • • • • • • •

ELLA-W163-A v3.0+HS H a/b/g/n 18 dBm • • 2p • • • • • • • •

H = HCI 1p = One external antenna pad for combined Bluetooth and Wi-Fi 2p = Two external antenna pads, one each for Bluetooth and Wi-Fi


SHO

RT

RA

NG

E

Standard


Features

Wi-Fi standards IEEE 802.11 a (option), b, g, n IEEE 802.11 d, e, h, i, j, k, r, s, w

Wi-Fi transfer rates IEEE 802.11n: max.150 Mbps (40 MHz channel) max. 72 Mbps (20 MHz channel) IEEE 802.11g: 54,48,36,24,18,12,9,6 Mbps IEEE 802.11b: 11, 5.5, 2, 1 Mbps

Bluetooth v3.0+HS (High Speed) v2.1+EDR (Enhanced Data Rate)

Frequency range Bluetooth/Wi-Fi: 2.4-2497 GHz Wi-Fi: 4.900-5.830 GHz

Antenna 1 combined or 2 separate antenna solder pads for Bluetooth and Wi-Fi

Output power Wi-Fi IEEE 802.11 b: 18 dBm Wi-Fi IEEE 802.11 a/g/n: 15 dBm Bluetooth: 8 dBm

Software features

RF parameters Available in on-board OTP memory

MAC addresses Available in on-board OTP memory

Security WEP64/128 WPA (TKIP, AES) WPA2 (CCMP, AES) WAPI hardware support 64/128 bit AES hardware support

Wi-Fi operational Station (STA): Infrastructure & ad-hoc mode modes μAP: Supports up to 8 stations Wi-Fi direct One single firmware for Wi-Fi STA, μAP and Bluetooth

Driver support Free of charge drivers for: Android 4.4 Linux 2.6.x Linux 3.x

Wi-Fi / Bluetooth Internal TDM mechanism coexistence

Support for low power modes

Interfaces

Host interface SDIO (4-bit)

Audio interface PCM (Bluetooth audio)

Electrical data

Power supply 3.3 VDC and 1.8 VDC

Power consumption 125 mA (average) @ 3.3 VDC 210 mA (max) @ 3.3 VDC

Package





Automotive qualification according to VW 80000 / ISO 16750-4

Support products

The ELLA-W1 evaluation kits include an evaluation board which is a ready-made reference design. Users can either work with its onboard antenna or an external antenna connected via coaxial connector. The board offers a standard SDIO connector for host communication.

EVK-ELLA-W161-A Evaluation kit for versions with 1 antenna pad (ELLA-W131-A and ELLA-W161-A)

EVK-ELLA-W163-A Evaluation kit for versions with 2 antenna pads (ELLA-W133-A and ELLA-W163-A)


Europe (ETSI R&TTE)

US (FCC CFR 47 part 15 unlicensed modular transmitter approval)

Canada (IC RSS)

Product variants

ELLA-W131-A Single-band 2.4 GHz module with 1 antenna solder pad

ELLA-W133-A Single-band 2.4 GHz module with 2 separate antenna solder pads for Bluetooth and Wi-Fi

ELLA-W161-A Dual-band 2.4 and 5 GHz module with 1 antenna solder pad

ELLA-W163-A Dual-band 2.4 and 5 GHz module with 2 separate antenna solder pads for Bluetooth and Wi-Fi Note: ELLA-W1 series was formerly known as Lesswire WiBear 11n

Further information



| Positioning modules

Positioning modules

Positioning modules |

Overview

For an overview of previous generation positioning modules, see page 87.

NEO seriesGNSS modules12.2x16.0 x2.4 mm

MAX seriesGNSS modules9.7x10.1x2.5 mm

CAM-M8 seriesGNSS antenna modules9.6 x14.0 x1.95 mm

EVA seriesGNSS modules7.0 x 7.0 x1.1 mm

Model Type Supply Interfaces Features Grade

GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

dat

a

Con

curr

ent

GN

SS

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

/ pr

otec

t pi

n

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

Pag

e

Standalone positioning modules

EVA-M8M • • R • • • • • • • • C 52

EVA-7M • • • • • • • • C 54

MAX-M8C • • • • • • • • C • • 56

MAX-M8Q • • • • • • • • • T • • 56

MAX-M8W • • • • • • • • T • • • 56

MAX-7C • • • • • • C • • 58

MAX-7Q • • • • • • • T • • 58

MAX-7W • • • • • • T • • • 58

NEO-M8N • • R • • • • • • • • • • • • • T • 60

NEO-M8Q • • • • • • • • • • • • • T • 60

NEO-M8M • • • • • • • • • • • C 60

NEO-7N • • • • • • • • • • • • • T • 62

NEO-7M • • • • • • • • • C 62

LEA-M8S • • • • • • • • • • • T • • • 64

Standalone positioning antenna modules with integrated antenna

CAM-M8Q • • • • • • • • • • • • T 66

CAM-M8M • • • • • • • • • • • • C 66

PAM-7Q • • • • • • • • T 68

Timing and raw data modules

LEA-M8F • • R • • • • • • • • • • V • P • 70

NEO-M8T • • R • • • • • • • • • • • • • • • T 72

LEA-M8T • • R • • • • • • • • • • • • • • T • • • 72

Dead Reckoning modules

NEO-M8L • • R • D • • • • • • • • • • C • • 74

Precise positioning modules

NEO-7P • • • • • • • • • • • • • C 76

= Optional, or requires external componentsP = Protection only

C = CrystalT = TCXOV = VCTCXO

R = Galileo ready = Higher backup currentD = Onboard 3D sensors

POSI

TIO

NIN

G


| Standalone positioning modules

EVA-M8M series u-blox M8 concurrent GNSS modules

EVA-M8M7.0 x 7.0 x 1.1 mm

Highlights• Industry’s smallest standalone GPS/QZSS, GLONASS,

BeiDou modules

• Minimal system cost

• Eases design and manufacturing

• No host integration or external components needed

• Backward compatible with EVA-7M

Product descriptionThe EVA-M8M GNSS modules feature the exceptional performance of the u-blox M8 positioning engine (GPS, GLONASS, BeiDou, QZSS and SBAS). The EVA -M8M series modules delivers high sensitivity and minimal acquisition times in the ultra compact EVA form factor.

The EVA-M8M series is an ideal solution for cost and space-sensitive applications. It is easy to design-in, only requiring an external GNSS active antenna in most applica-tions. The layout of the EVA-M8M is especially designed to ease the customer’s design and limit near field interferenc-es since RF and digital domains are kept separated.

The EVA-M8M series uses a crystal oscillator for lower system costs. Like other u-blox GNSS modules, the EVA-M8M series uses components selected for functioning reliably in the field over the full operating temperature range.

With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for reliable

positioning. The EVA-M8M series comes in two vari-ants. The EVA-M8M-0 defaults to GPS/QZSS/GLONASS and fits global applications, whereas EVA-M8M-1 defaults to GPS/QZSS/BeiDou making it the ideal module for China. The right satellite constellations can be selected without touching software, and therefore reducing the design and testing effort.

The EVA-M8M series can be easily integrated in manu-facturing, thanks to the QFN-like package. The modules are available in 500 pcs/reel, ideal for small production batches. The EVA-M8M modules combine a high level of integration capability with flexible connectivity op-tions in a miniature package. This makes the EVA-M8M modules perfectly suited for industrial and mass-market end products with strict size and cost requirements. The DDC (I2C compliant) interface provides connectivity and enables synergies with u-blox cellular modules.

The EVA-M8M modules are manufactured in ISO/TS 16949 certified sites and qualified as stipulated in the JESD47 standard.

Product selector

R = Galileo ready C = Crystal = Optional, or requires external components



GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

& F

requ

ncy

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

EVA-M8M • • R • • • • • • • C

Standalone positioning modules |

Features

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C

Max nav. Single GNSS: up to 18 Hzupdate rate Concurrent GNSS: up to 10 Hz

Accuracy Position 2.5 m CEP SBAS 2.0 m CEP

Acquisition Cold starts: 27 s Aided starts: 4 s Reacquisition: 1 s

Sensitivity Tracking and Nav: –164 dBm Cold starts: –147 dBm Hot starts: –156 dBm

Assistance GNSS AssistNow Online AssistNow Offline AssistNow Autonomous OMA SUPL & 3GPP compliant

Oscillator Crystal

Real time clock Can be derived either from onboard(RTC) GNSS crystal (for lowest system costs and smallest size) or from external RTC Clock (Default mode, for lower battery current)

Anti jamming Active CW detection and removal

SQI Flash FW update(optional) for: AssistNow Offline AssistNow Autonomous

Supported antennas Active and passive1

Antenna Short and open circuit detectionsupervision supported with external circuit

1 An external LNA is recommended

Electrical data

Supply voltage 1.65 V – 3.6 V

Digital I/O 1.65 V – 3.6 Vvoltage level

Power 25 mA @ 3 V (continuous)consumption 5.5 mA @ 3 V power save mode (1 Hz)

Backup supply 1.4 V – 3.6 V

Package 43 pin LGA (Land Grid Array): 7.0 x 7.0 x 1.1 mm, 0.13 g

Pinout

Interfaces

Serial interfaces 1 UART 1 USB 1 SPI (Optional) 1 DDC (I2C compliant)

Digital I/O Configurable timepulse 1 EXTINT input for Wakeup

Timepulse Configurable: 0.25 Hz to 10 MHz

Protocols NMEA, UBX binary, RTCM



Storage temp. –40° C to +85° C

RoHS compliant (lead-free) and green (no halogens)

Qualification according to standard JESD47


Moisture sensitivity level 3



Support products

Evaluation kit to get familiar with u-blox M8 positioning technology, evaluate functionality, and visualize GNSS performance.

EVK-M8EVA: u-blox M8 GNSS evaluation kit for EVA-M8M (crystal)C88-M8M: NEO adaptor board using EVA-M8M for easier evalutation for existing NEO-xM design

EVA-M8M

11

23

45

67

89 1

2726

2524

2322

2120

19

128 29 30 31 32 33 34 35 36

1 101112131415161718

GND GND GND

GND GND

GNDGNDTop View

POSI

TIO

NIN

G

Standard



EVA-7M u-blox 7 GNSS module

EVA-7M7.0 x 7.0 x 1.1 mm

Highlights• Industry’s smallest standalone GPS/QZSS, GLONASS module

• Minimal system cost

• Minimal power consumption

• Eases design and manufacturing

• No host integration or external components needed

Product descriptionThe EVA-7M standalone GNSS module features the reliable performance of the u-blox 7 positioning engine (receiving GPS, GLONASS, QZSS and SBAS signals). The EVA-7M delivers high sensitivity and minimal acquisition times in the ultra compact EVA form factor.

The EVA-7M is an ideal solution for cost and space-sen-sitive applications. It is easy to design-in, only requiring an external GNSS antenna in most applications. The layout of the EVA-7M is especially designed to ease the customer’s design and limit near field interferences since RF and digital domains are kept separated.

EVA-7M uses a crystal oscillator for lower system costs. Like other u-blox GNSS modules, the EVA-7M uses components selected for functioning reliably in the field over the full operating temperature range.

The EVA-7M is easily integrated in manufacturing, thanks to its QFN-like package and low moisture sen-sitivity level. The modules are available in 500 pcs/reel, ideal for small production batches. The EVA-7M module combines a high level of integration capability with flex-ible connectivity options in a miniature package. This makes it perfectly suited for industrial and mass-market end products with strict size and cost requirements. The DDC (I2C compliant) interface provides connectivity and enables synergies with u-blox cellular modules.

The EVA-7M module is manufactured in ISO/TS 16949 certified sites and qualified as stipulated in the JESD47 standard.

Product selector

C = Crystal = Optional, or requires external components


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

& F

requ

ncy

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

EVA-7M • • • • • • • • C



Features

Receiver type 56-channel u-blox 7 engine GPS/QZSS L1 C/A, GLONASS L1 FDMA SBAS: WAAS, EGNOS, MSAS

Navigation 10 Hzupdate rate

Accuracy GPS GLONASSPosition 2.5 m CEP 4.0 m CEP SBAS 2.0 m CEP n.a.

AcquisitionCold starts: 30 s 32 sAided starts: 5 s n.a.Reacquisition: 1 s 3 s

Sensitivity Trackingand Nav.: –160 dBm –158 dBmCold starts: –147 dBm –139 dBmWarm starts: –148 dBm –145 dBm

Assistance GPS AssistNow Online AssistNow Offline AssistNow Autonomous OMA SUPL & 3GPP compliant

Oscillator Crystal

Real time clock Can be derived either from onboard(RTC) GNSS crystal (for lowest system costs and smallest size) or from external RTC Clock (Default mode, for lower battery current)


Memory Onboard ROM

Supported antennas Active and passive1


1 An external LNA is recommended

Electrical data



Power 16.5 mA @ 3 V (continuous)consumption 4 mA @ 3 V power save mode (1 Hz)






Qualification according to standard JESD47


Moisture sensitivity level 3

Package 43 pin LGA (Land Grid Array): 7.0 x 7.0 x 1.1 mm

Pinout

Interfaces

Serial interfaces 1 UART 1 USB 1 SPI (Optional) 1 DDC (I2C compliant)






Support products

Evaluation kit to get familiar with u-blox 7 positioning technology, evaluate functionality, and visualize GPS performance.

EVK-7EVA: u-blox 7 evaluation kit for EVA-7M (crystal)C88-7M: NEO adaptor board using EVA-7M for easier evalutation for existing NEO-xM designs

EVA-7MTop View

11

23

45

67

89 1

2726

2524

2322

2120

19

128 29 30 31 32 33 34 35 36

1 101112131415161718

GND GND GND

GND GND

GNDGND

POSI

TIO

NIN

G

Standard



MAX-M8 series u-blox M8 concurrent GNSS modules

MAX-M8 series9.7 x 10.1 x 2.5 mm

Highlights

• Miniature LCC package

• Concurrent reception of GPS/QZSS, GLONASS, BeiDou

• Industry leading –167 dBm navigation sensitivity

• Product variants to meet performance and cost requirements

• Pin-to-pin and software compatible with MAX-7 and MAX-6

Product descriptionThe MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 engine in the industry proven MAX form fac-tor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from out of three GNSS systems (GPS, GLONASS and BeiDou) for more reliable positioning. The MAX-M8 series is ideal for performance driven applications.

The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8C is optimized for cost sensitive applications and has the lowest power consumption, the MAX-M8Q provides best performance for passive and active anten-nas designs, while the MAX-M8W is optimized for active antennas with best performance. The industry-proven MAX form factor allows easy migration from previous MAX generations. Sophisticated RF-architecture and

Product selector

interference suppression ensure maximum performance even in GNSS-hostile environments.

The MAX-M8 combines a high level of inte gration capability with flexible connectivity options in a min-iature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost re-quirements. The MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules.

u-blox M8 modules use GNSS chips qualified according to AEC-Q100, are manufactured in ISO/TS 16949 certi-fied sites, and fully tested on a system level. Qualifica-tion tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

yA

ctiv

e an

tenn

a /

LNA

con

trol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

MAX-M8C • • • • • • • C • •

MAX-M8Q • • • • • • • • T • •

MAX-M8W • • • • • • • T • • •

= Optional, not activated per default or requires external components C = Crystal / T = TCXO = Higher backup current



Features

Receiver type 72-channel u-blox M8 concurrent GNSS receiver GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS: WAAS, EGNOS, MSASNavigation Single GNSS: up to 18 Hzupdate rate Concurrent GNSS: up to 10 HzPosition 2.0 m CEPaccuracy Acquisition1 MAX-M8Q/W MAX-M8CCold starts: 26 s 27 sAided starts: 2 s 4 sReacquisition: 1 s 1 sSensitivity1 Trackingand Nav.: –167 dBm –164 dBmCold starts: –148 dBm –147 dBmWarm starts: –156 dBm –156 dBmAssistance GNSS AssistNow Online AssistNow Offline (up to 35 days) AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliantOscillator TCXO (MAX-M8Q/M8W), crystal (MAX-M8C)RTC crystal Built-In (MAX-M8Q/M8W) or cost efficient solution with higher Backup current (MAX-M8C)Noise figure On-chip LNAAnti jamming Active CW detection and removalMemory Onboard ROMSupported Active and passiveantennasOdometer Travelled distance1 For default mode: GPS/SBAS/QZSS+GLONASS

Electrical data

Supply voltage 1.65 V – 3.6 V (MAX-M8C) 2.7 V – 3.6 V (MAX-M8Q/M8W)

Power 25 mA @ 3.0 V (continuous)consumption2 5.5 mA @ 3.0 V (power save mode, 1 Hz, GPS only)


2 MAX-M8C



Storage temp. –40° C to +85° C (MAX-M8Q/M8W) –40° C to +105° C (MAX-M8C)


Green (halogen-free): MAX-M8Q


Manufactured and fully tested in ISO/TS 16949 certified production sites

Uses u-blox M8 chips qualified according to AEC-Q100

Package 18 pin LCC (Leadless Chip Carrier): 9.7 x 10.1 x 2.5 mm

Pinout

Interfaces

Serial interfaces 1 UART 1 DDC (I2C compliant)






MAX-M8Top View

1

2

3

4

5

6

7

8

9

18

16

15

14

13

12

17

11

10

Reserved

SCL

SDA

V_ANT/NC

VCC_RF

ANTON

GND

RF_IN

GND

GND

TXD

RXD

TIMEPULSE

EXTINT0

V_BCKP

VCC_IO

VCC

RESET N

Support products

u-blox M8 evaluation kits:

Easy-to-use kits to get familiar with u-blox M8 positioning technology, evaluate functionality, and visualize GNSS performance.

EVK-M8N: u-blox M8 GNSS evaluation kit, with TCXO, supports MAX-M8Q/M8W

EVK-M8C: u-blox M8 GNSS evaluation kit, with crystal, supports MAX-M8C

POSI

TIO

NIN

G

Standard



MAX-7 series u-blox 7 GNSS modules

MAX-7 series9.7 x 10.1 x 2.5 mm

Highlights

• Miniature LCC package

• GNSS engine for GPS/QZSS, GLONASS



• Pin-to-pin and software compatible with MAX-M8 and MAX-6

Product descriptionThe MAX-7 series of standalone GNSS modules is built on the exceptional performance of the u-blox 7 multi-GNSS (GPS, GLONASS, QZSS and SBAS) engine. The MAX-7 series delivers high sensitivity and minimal acquisition times in the ultra compact MAX form factor.

The MAX-7 series provides maximum sensitivity while maintaining low system power. The MAX-7C is optimized for cost sensitive applications. The MAX-7Q provides best performance and lowest power, while the MAX-7W provides best performance and is optimized for active antennas. The industry proven MAX form factor allows easy migration from MAX-6 modules. So-phisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.

The MAX-7 series combines a high level of integration capability with flexible connectivity options in a minia-ture package. This makes it perfectly suited for indus-trial and mass-market end products with strict size and cost requirements. The DDC (I2C compliant) interface provides connectivity and enables synergies with u-blox cellular modules.

u-blox 7 modules use GNSS chips qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”. MAX-7Q complies with green/halogen free standards.

Product selector

= Optional, not activated per default or requires external components C = Crystal / T = TCXO = Higher backup current



GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

yA

ctiv

e an

tenn

a /

LNA

con

trol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

MAX-7C • • • • • • C • •

MAX-7Q • • • • • • • T • •

MAX-7W • • • • • • T • • •


Features

Receiver type 56-channel u-blox 7 engine GPS/QZSS L1 C/A, GLONASS L1 FDMA SBAS: WAAS, EGNOS, MSAS

Navigation up to 10 Hzupdate rate

Accuracy GPS GLONASSPosition 2.5 m CEP 4.0 m SBAS 2.0 m CEP n.a.

Acquisition1

Cold starts: 29 s 30 sAided starts: 5 s n.a.Reacquisition: 1 s 1 s

Sensitivity Tracking: –161 dBm –158 dBmCold starts: –148 dBm –140 dBmWarm starts: –148 dBm –145 dBm


Oscillator TCXO (MAX-7Q/7W), crystal (MAX-7C)

RTC crystal Built-In (MAX-7Q/7W) or cost efficient solution with higher Backup current (MAX/7C)


Memory Onboard ROM

Supported Active and passiveantennas1 MAX-7Q/W

Electrical data

Supply voltage 1.65 V – 3.6 V (MAX-7C) 2.7 V – 3.6 V (MAX-7Q/7W)


Power 16.5 mA @ 3 V (continuous)2

consumption 4.5 mA @ 3 V (power save mode, 1 Hz)2


2 MAX-7C





Green (halogen-free): MAX-7Q



Uses u-blox 7 chips qualified according to AEC-Q100


Pinout

Interfaces







MAX-7Top View

1

2

3

4

5

6

7

8

9

18

16

15

14

13

12

17

11

10

Reserved

SCL2

SDA2

V_ANT/NC

VCC_RF

ANTON

GND

RF_IN

GND

GND

TXD1

RXD1

TIMEPULSE

EXTINT0

V_BCKP

VCC_IO

VCC

VRESET

Support products

u-blox 7 evaluation kits:

Easy-to-use kits to get familiar with u-blox 7 positioning technology, evaluate functionality, and visualize GNSS performance.

EVK-7N: u-blox 7 GNSS evaluation kit, with TCXO, supports MAX-7Q, MAX-7W

EVK-7C: u-blox 7 GNSS evaluation kit, with crystal, supports MAX-7C

POSI

TIO

NIN

G

Standard



NEO-M8 series u-blox M8 concurrent GNSS modules

Highlights




• Combines low power consumption and high sensitivity

• Backward compatible with NEO-7, NEO-6 and NEO-5 families

Product descriptionThe NEO-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 GNSS (GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS) engine in the industry proven NEO form factor.

The NEO-M8 series provides high sensitivity and min-imal acquisition times while maintaining low system power. The NEO-M8M is optimized for cost sensitive applications, while NEO-M8N and NEO-M8Q provide best performance and easier RF integration. The NEO form factor allows easy migration from previous NEO generations. Sophisticated RF-architecture and interfer-ence suppression ensure maximum performance even in GNSS-hostile environments.

The NEO-M8 combines a high level of robustness and inte gration capability with flexible connectivity options.

Product selector

NEO-M8 series12.2 x 16.0 x 2.4 mm

The future-proof NEO-M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems. This makes NEO-M8 perfectly suited to industrial and automotive applications.

The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular mod-ules. For RF optimization the NEO-M8N/Q features an additional front-end LNA for easier antenna integration and a front-end SAW filter for increased jamming immunity.

u-blox M8 modules use GNSS chips qualified according to AEC-Q100, are manufactured in ISO/TS 16949 certi-fied sites, and fully tested on a system level. Qualifica-tion tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.

= Optional, not activated per default or requires external components R = Galileo readyC = Crystal / T = TCXO


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

yA

ctiv

e an

tenn

a /

LNA

con

trol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

NEO-M8N • • R • • • • • • • • • • • • T •

NEO-M8Q • • • • • • • • • • • • T •

NEO-M8M • • • • • • • • • • C



Features

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready: E1B/C (NEO-M8N)Navigation Single GNSS: up to 18 Hzupdate rate1 Concurrent GNSS: up to 10 Hz Position 2.0 m CEPaccuracy Acquisition NEO-M8N/Q NEO-M8MCold starts: 26 s 27 sAided starts: 2 s 4 sReacquisition: 1 s 1 sSensitivity Trackingand Nav.: –167 dBm –164 dBmCold starts: –148 dBm –147 dBmWarm starts: –156 dBm –156 dBmAssistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days)2

AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliantOscillator TCXO (NEO-M8N/Q), crystal (NEO-M8M)RTC crystal Built-InNoise figure On-chip LNA (NEO-M8M), Extra LNA for lowest noise figure (NEO-M8N/Q)Anti jamming Active CW detection and removal. Extra onboard SAW band pass filter (NEO-M8N/Q)Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)Supported Active and passiveantennasOdometer Travelled distanceData-logging For position, velocity, and time (NEO-M8N)

Electrical data

Supply voltage 1.65 V to 3.6 V (NEO-M8M) 2.7 V to 3.6 V (NEO-M8N/Q)Power 23 mA @ 3.0 V (continuous)consumption1 5 mA @ 3.0 V power save mode (1 Hz, GPS only)Backup supply 1.4 V – 3.6 V

1 NEO-M8M

Package

24 pin LCC (Leadless Chip Carrier):12.2 x 16.0 x 2.4 mm

Pinout

Interfaces

Serial interfaces 1 UART 1 USB V2.0 full speed 12 Mb/s 1 SPI (optional) 1 DDC (I2C compliant) Digital I/O Configurable timepulse 1 EXTINT input for wakeupTimepulse Configurable: 0.25 Hz to 10 MHzProtocols NMEA, UBX binary, RTCM



Storage temp. –40° C to +85° C (NEO-M8N/Q) –40° C to +105° C (NEO-M8M)







NEO-M8Top View

1

2

3

4

5

6

7

8

9

10

11

12

24

22

21

20

19

18

17

16

15

14

13

23

GND Reserved

D_SEL

TIMEPULSE

EXTINT

USB_DM

USB_DP

VDD_USB

RESET_N

VCC_RF

GND

GND

RF_IN

GND

VCC

V_BCKP

RxD

TxD

SCL

SDA

Reserved

Reserved

Reserved

ANT_ON/Reserved

Support products


Easy-to-use kits to get familiar with u-blox M8 positioningtechnology, evaluate functionality, and visualize GNSS performance.

EVK-M8N: u-blox M8 GNSS evaluation kit, with TCXO, supports NEO-M8N/Q

EVK-M8C: u-blox M8 GNSS evaluation kit, with crystal, supports NEO-M8M

POSI

TIO

NIN

G

Standard



NEO-7 series u-blox 7 GNSS modules

Highlights


• Product variants to meet performances and cost requirements


• Backward compatible with NEO-6 and NEO-5 families

Product descriptionThe NEO-7 series of standalone GNSS modules is built on the exceptional performance of the u-blox 7 GNSS (GPS, GLONASS, QZSS and SBAS) engine. The NEO-7 series delivers high sensitivity and minimal acquisition times in the industry proven NEO form factor.

The NEO-7 series provides maximum sensitivity while maintaining low system power. The NEO-7M is opti-mized for cost sensitive applications, while NEO-7N pro-vides best performance and easier RF integration. The industry proven NEO form factor allows easy migration from previous NEO generations. Sophisticated RF-archi-tecture and interference suppression ensure maximum performance even in GPS-hostile environments.

The NEO-7 combines a high level of robustness and inte gration capability with flexible connectivity options.

NEO-7 series12.2 x 16.0 x 2.4 mm

Future-proof the NEO-7N’s internal Flash allows simple firmware upgrades for supporting additional GNSS systems. This makes NEO-7 perfectly suited to industrial and automotive applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with u-blox cellular modules. For RF optimization the NEO-7N features an additional front-end LNA for easier antenna integration and a front-end SAW filter for increased jamming immunity.

u-blox 7 modules use GNSS chips qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.

Product selector

= Optional, not activated per default or requires external components C = Crystal / T = TCXO


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

& F

requ

ncy

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

NEO-7N • • • • • • • • • • • • • T •NEO-7M • • • • • • • • • C



Features

Receiver type 56-channel u-blox 7 engine GPS L1 C/A, GLONASS L1 FDMA, QZSS L1 C/A SBAS: WAAS, EGNOS, MSAS

Navigation Up to 10 Hzupdate rate

Accuracy GPS GLONASSPosition 2.5 m CEP 4 mSBAS 2.0 m CEP n.a.

AcquisitionCold starts: 29 s 30 s Aided starts: 5 s n.a.Reacquisition: 1 s 3 s

Sensitivity Tracking & Nav: –162 dBm –158 dBmCold starts: –148 dBm –139 dBmWarm starts: –148 dBm –145 dBm


Oscillator TCXO (NEO-7N), crystal (NEO-7M)

RTC crystal Built-In

Noise figure On-chip LNA (NEO-7M); extra LNA for lowest noise figure (NEO-7N)

Anti jamming Active CW detection and removal; extra onboard SAW band pass filter (NEO-7N)

Memory ROM (NEO-7M) or Flash (NEO-7N)

Supported Active and passiveantennas

Electrical data

Supply voltage 1.65 V to 3.6 V (NEO-7M) 2.7 V to 3.6 V (NEO-7N)

Power 17 mA @ 3 V (continuous)1

consumption 5 mA @ 3 V power save mode (1 Hz)1

Backup supply 1.4 V – 3.6 V1 NEO-7M

Package

24 pin LCC (Leadless Chip Carrier):12.2 x 16.0 x 2.4 mm

Pinout

Interfaces

Serial interfaces 1 UART 1 USB V2.0 full speed 12 Mb/s 1 SPI (optional) 1 DDC (I2C compliant)

Digital I/O Configurable timepulse 1 EXTINT input for wakeup












NEO-7Top View

1

2

3

4

5

6

7

8

9

10

11

12

24

22

21

20

19

18

17

16

15

14

13

23

GND Reserved

D_SEL

TIMEPULSE

EXTINT

USB_DM

USB_DP

VDD_USB

RESET_N

VCC_RF

GND

GND

RF_IN

GND

VCC

V_BCKP

RxD

TxD

SCL

SDA

Reserved

Reserved

Reserved

ANT_ON/Reserved

nEO-7Top view

Support products



EVK-7N: u-blox 7 GNSS evaluation kit, with TCXO, supports NEO-7N

EVK-7C: u-blox 7 GNSS evaluation kit, with crystal, supports NEO-7M

POSI

TIO

NIN

G

Standard


LEA-M8S u-blox M8 concurrent GNSS module


Highlights




• UART, USB and DDC (I2C compliant) interfaces

• Easy migration from LEA-5 and LEA-6 modules

Product descriptionThe LEA-M8S module delivers concurrent GNSS location capability together with high-performance u-blox M8 positioning technology in the industry proven LEA form factor. With its dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest number of visible satellites from two out of three of the GNSS systems (GPS, GLONASS and BeiDou) for more reliable positioning. The LEA-M8S provides exceptional performance with low system power, and is optimized for cost sensitive applications.

The LEA-M8S has sophisticated RF-architecture and interference suppression ensuring maximum perform-ance even in GNSS-hostile environments. It features very low power GLONASS functionality. This 6th generation module in the LEA form factor allows simple migration from LEA-5 / LEA-6 GPS and LEA-6N GPS/GLONASS modules.

LEA-M8S17.0 x 22.4 x 2.4 mm

C = Crystal / T = TCXO

Product selectorModel Type Supply Interfaces Features Grade

GPS

/ Q

ZSS

GLO

NA

SS

Gal

ielo

BeiD

ou

Tim

ing

& F

requ

ency

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er D

C/D

C

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

LEA-M8S • • • • • • • • • • T • • •

The LEA-M8S combines a high level of robustness and integration capability with flexible connectivity options. The DDC (I2C compliant) interface provides connec-tivity and enables synergies with most u-blox cellular modules. For RF optimization, the LEA-M8S features a front-end SAW filter for increased jamming immunity.

LEA-M8S module uses u-blox GNSS chips qualified ac-cording to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.



Features

Receiver type 72-channel u-blox concurrent M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS

Accuracy Position 2.5 m CEP SBAS 2.0 m CEP

Acquisition Cold starts: 26 s Aided starts: 2 s Reaquisition: 1 s

Sensitivity Tracking & Nav.: –167 dBm Cold starts: –148 dBm Hot starts: –156 dBm

Assistance AssistNow Online AssistNow Offline (up to 35 days) AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant

Noise figure On-chip LNA

Anti jamming Active CW detection and removal, extra onboard SAW band pass filter

Oscillator TCXO

RTC crystal Built-in

Memory Onboard ROM

Supported antennas Active and passive

Odometer Travelled distance

Electrical Data


Power 26 mA @ 3 V (continuous)consumption 6 mA @ 3 V Power Save Mode (1 Hz, GPS only)


Interfaces

Serial interfaces 1 UART 1 USB V2.0 full speed 12 Mbit/s 1 DDC (I2C compliant)

Digital I/O Configurable timepulse 1 EXTINT input for wakeup

Timepulse Configurable 0.25 Hz – 10 MHzProtocols NMEA, UBX binary, RTCM


Pinout


Operating temp.: –40° C to +85° C

Storage temp.: –40° C to +85° C



Manufactured and fully tested in ISO/TS 16949 certified production sites.

Uses u-blox M8 chips qualified according to AEC-Q100.



LEA-M8STop View

1SDA

SCL

TxD

RxD

Reserved

VCC

GND

VCC_OUT

Reserved

RESET_N

V_BCKP

Reserved

GND

GND

RF_IN

VCC_RF

V_ANT

Reserved

Reserved

Reserved

VDD_USB

USB_DM

USB_DP

EXTINT0

TIMEPULSE

GND

GND

AADET_N

2

3

4

5

6

7

8

9

10

11

12

13

14

28

27

26

25

24

23

22

21

20

19

18

17

16

15

Support products


Evaluation kit to get familiar with u-blox M8 positioningtechnology, evaluate functionality, and visualize GNSSperformance.

EVK-M8N: u-blox M8 GNSS evaluation kid, with TCXO, supports LEA-M8S

POSI

TIO

NIN

G

Standard


| Positioning antenna modules

CAM-M8 series u-blox M8 concurrent GNSS antenna modules

CAM-M8 series 9.6 x 14.0 x 1.95 mm

Highlights


• Miniature size and weight with low power consumption

• Embedded, omnidirectional and wideband antenna


• Optional external antenna


Product descriptionThe u-blox CAM-M8Q and CAM-M8M chip antenna modules have the exceptional performance of the u-blox M8 multi-GNSS (GPS/QZSS, GLONASS and BeiDou) engine in industry proven form factor. The CAM-M8 series offers high sensitivity and strong signal levels in an ultra compact form factor.

Incorporating the CAM-M8 series modules into customer designs is simple and straightforward, thanks to the embedded GNSS antenna, small footprint of 9.6 x 14 x 1.95 mm, and sophisticated interference suppression that ensures maximum performance even in GNSS-hostile environments. The low power consumption and thin design allow end devices to be slimmer and smaller.

Despite of miniature size, the chip antenna in the CAM-M8Q and CAM-M8M performs extremely well against traditional patch antennas. Optimal performance is achieved by follow-ing design instructions available in the Hardware Integration Manual as customer PCB is part of the antenna solution.

The omnidirectional radiation pattern increases flexibility for device installation. Optionally, CAM-M8 series modules can be connected to an external GNSS antenna. The SMD design keeps manufacturing costs to a minimum and the small mass ensures high reliability.

The CAM-M8 series targets industrial and consumer applica-tions that require concurrent GPS and GLONASS or BeiDou reception. The CAM-M8Q and CAM-M8M are form-factor compatible to UC530 and UC530M modules, allowing the upgrade of existing designs with minimal effort.

CAM-M8 series modules use GNSS chips qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certi-fied sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental con-ditions and testing for electrical and electronic equipment”.CAM-M8Q and CAM-M8M complie with green / halogen-free standards.

Product selector

C = Crystal / T = TCXO


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V -

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

t de

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

t de

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

CAM-M8Q • • • • • • • • • • • T

CAM-M8M • • • • • • • • • • • C


Positioning antenna modules |

Features

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS

Max. nav. Single GNSS: up to 18 Hz update rate Concurrent GNSS: up to 10 Hz

Position 2.0 m CEP accuracy

Acquisition CAM-M8Q CAM-M8MCold starts: 26 s 27 sAided starts: 2 s 4 sReacquisition: 1 s 1 sSensitivity Trackingand Nav.: –167 dBm –164 dBmCold starts: –148 dBm –147 dBmWarm starts: –156 dBm –156 dBm

Assistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days) AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant

Oscillator TCXO (CAM-M8Q) Crystal (CAM-M8M)


Noise figure On-chip LNA and extra LNA for lowest noise figure

Anti jamming Active CW detection and removal; Extra onboard SAW band pass filter

Memory Onboard ROM


Electrical data

Supply voltage 1.6 V to 3.6 V (CAM-M8M) 2.7 V to 3.6 V (CAM-M8Q)

Digital I/O 1.6 V to 3.6 V (CAM-M8M)voltage level 2.7 V to 3.6 V (CAM-M8Q)

Power 30 mA @ 3.0 V (continuous)consumption 7 mA @ 3.0 V power safe mode (1 Hz, GPS only)

Backup supply 1.4 V to 3.6 V

Interfaces

Serial interfaces 1 UART 1 SPI (optional) 1 DDC (I2C compliant)

Digital I/O Configurable timepulse 1 EXTINT input for WAKEUP

Timepulse Configurable 0.25 Hz to 10 MHz



Pinout





Green (halogen free)



Use u-blox M8 chips qualified according to AEC-Q100

Support products



EVK-M8CAM: u-blox M8 concurrent GNSS evaluation kit, supports CAM-M8Q


See datasheet CAM-M8Q samples available via u-blox’ Online shop atwww.u-blox.com/en/online-shop.html

CAM-M8Top View

12

34

56

78

9

313029

2827

1011

1213

2625

2423

2221

2019

1817

1615

14 GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

ANT

RF_IN

DSEL

RESET_N

SAFEBOOT_N

GNDRXD

TDX

GND

Reserved

ANT_

ON

TIMEP

ULS

E

Reserved

SDA

SCL

EXTINT

V_BCKP

VCC

VCC_IO

POSI

TIO

NIN

G

Standard


PAM-7Q u-blox 7 GPS antenna module

| Positioning antenna modules

PAM-7Q 22.0 x 22.0 x 8.0 mm

Highlights

• Embedded GPS antenna

• Excellent antenna performance


• Form-factor compatible with UP501

• Easy integration into design

Product descriptionThe u-blox PAM-7Q patch antenna module has the exceptional performance of the u-blox 7 GNSS engine and delivers high sensitivity and minimal acquisition times in an industry proven form factor.

Incorporating the PAM-7Q into customer designs is simple and straightforward, thanks to the embedded antenna, low power consumption, simple interface, and sophisticated interference suppression that ensures maximum performance even in GPS-hostile environ-ments.

The 18 x 18 mm patch antenna of PAM-7Q provides RHCP polarization, which is not achievable with smaller patch antenna elements. The simple design and easy interfacing keeps installation costs to a minimum.

T = TCXO

PAM-7Q targets industrial and consumer applications that require small and cost efficient smart antenna solu-tions. It is form factor compatible with UP501 module, allowing the upgrade of existing designs with minimal effort.

PAM-7Q modules use GPS chips qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”. PAM-7Q complies with green / halogen-free standards.


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

2.7

V –

3.6

V

3.0

– 4.

2 V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

ope

n ci

rcui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

PAM-7Q • • • • • • • • T

Bottom view(shield side)

Top view(patch antenna side)


Positioning antenna modules |

Features

Receiver type 56-channel u-blox 7 engine GPS / QZSS L1 C/A SBAS: WAAS, EGNOS, MSAS

Navigation Up to 10 Hz update rate

Accuracy Position 2.5 CEP SBAS 2.0 m CEP


Sensitivity Tracking & Nav: –161 dBm Cold starts: –147 dBm Warm starts: –147 dBm


Oscillator TCXO


Anti jamming Active CW detection and removal, onboard SAW band pass filter

Memory Onboard ROM

Electrical data


Digital I/Ovoltage level 2.7 V – 3.6 V

Power consumption 22 mA @ 3 V (continuous)






Green (halogen free)



Use u-blox 7 chips qualified according to AEC-Q100

Package 8 pin contact header: 22.0 x 22.0 x 8.0 mm

Pinout

Interfaces


Digital I/O Configurable timepulse

Timepulse Configurable: 0.25 Hz to 1 kHz


Support products


Easy-to-use kits to get familiar with u-blox 7 positioning technology, evaluate functionality, and visualize GPS performance.

EVK-7PAM: u-blox 7 GPS evaluation kit, supports PAM-7Q



PAM-7QBottom View (shield side)

6

5

4

3

2

1

8

7

RXD

TXD

GND

VCC

V_BCKP

TIMEPULSE

SDA

SCL

POSI

TIO

NIN

G

Standard


LEA-M8F u-blox M8 time and frequency reference GNSS module

| Timing and frequency modules

Highlights• Concurrent reception of GPS/QZSS, GLONASS, BeiDou

• Integral disciplined low phase-noise 30.72 MHz system reference oscillator

• Accurate measurement and control of external oscillators

• Industry leading acquisition sensitivity and single-satellite timing

• Autonomous 100 ppb hold-over

• Prepared for integration with external PTP, Sync-E and network listen

Product descriptionu-blox time and frequency products provide multi-GNSS synchronisation for cost-sensitive network edge equipment including Small Cell and Femto wireless base-stations. The LEA-M8F module is a fully self-contained phase and fre-quency reference based on GNSS, but can also be used as part of a complete timing sub-system including macro-sniff Synchronous Ethernet and packet timing.

The LEA-M8F module includes a low-noise 30.72 MHz VCTCXO meeting the master reference requirements for LTE Small Cells and provides 100 ppb autonomous hold-over. The LEA-M8F module can also measure and control an external TCXO or OCXO for TD-LTE, LTE Advanced and other applications requiring extended hold-over. External sources of synchronization are supported through time-pulse and frequency inputs and a message interface. This allows measurements from macro-sniff, Sync-E or packet timing to be combined with measurements from GNSS.

u-blox time and frequency products include timing integ-rity alarms that report phase and frequency uncertainty both during normal operation and hold-over. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design.

LEA-M8F17.0 x 22.4 x 3.5 mm

P = Short circuit protection only D = Development useR = Galileo ready V = VCTCXO


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ielo

BeiD

ou

Tim

ing

& F

requ

ency

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

3.0

– 3.

6 V

Low

est

pow

er D

C/D

C

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

LEA-M8F • • R • • • • • D • • • • • V • P •

Example application (Small Cell)In a wireless Small Cell application, the LEA-M8F can distribute a disciplined low-phase noise 30.72 MHz reference signal directly to the RF transceivers. GNSS synchronisation is combined with network sources by an exchange of synchronisation signals, status and control messages with the base-band processor. Source selection and hold-over may be controlled by either the LEA-M8F or base-band application.

Base-band IC

Transceiver Transceiver SON/Macro-sniff

E-NetPHY Time-stamp

counter

Mobile PHY

LEA-M8F

UBX

PPS

Micro-controller

OS

PTP/NTP

GPS interface

Sync-E PLL

Servo

Synchronization management

Reference Oscillator


Timing and frequency modules |

Features – GNSS

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C (subject to firmware upgrade)

GPS GLONASS

Accuracy 2.5 m CEP 4.0 m CEP

Acquisition Cold starts: 26 s 30 s Aided coldstarts: 2 s 8 s

Sensitivity Tracking: –165 dBm –165 dBmCold start(aided): –157 dBm –148 dBm(autonomous): –148 dBm –145 dBmReacquisition: –160 dBm –157 dBm

Assistance GNSS AssistNow Online OMA SUPL & 3GPP compliant interface

Internal oscillator VCTCXO

Noise figure On-chip LNA; extra LNA for lowest noise figure

Anti jamming Active CW detection and removal, extra onboard SAW band pass filter

Supported antennas Active and passive

Internal SQI Flash For firmware update

Features – synchronizationFrequency output 30.72 MHz disciplined

Phase noise 10 Hz: -90 dBc/Hz 10 kHz: -143 dBc/Hz 100 Hz: -120 dBc/Hz 100 kHz: -145 dBc/Hz 1 kHz: -130 dBc/Hz 1 MHz: -149 dBc/Hz

Jitter (100 Hz – 1 MHz) 0.15 ps

EVM (100 Hz – 1 MHz @ 2100 MHz) < 0.2%

Frequency control (internal oscillator) GNSS locked: 5 ppb Hold-over: 100 ppb, 24 hr

Frequency control (external oscillator) Resolution: < 5 ppb Frequencies: 10, 13, 19.2, 20, 26, 30.72, 40 MHz Hold-over: Determined by external oscillator

Phase Clear sky: < 20 nscontrol Indoor: < 500 ns typ.

Time-pulse input Resolution: < 50 ns

Time-pulse output Jitter: < 2 ns

Time-pulse frequency: 0.5 Hz to 2 Hz


Pinout


Operating temp.: –40° C to +85° C




Electrical data


Power consumption 41 mA @ 3.3 V

Support products


Evaluation kit to get familiar with u-blox M8 positioningtechnology, evaluate functionality, and visualize GNSSperformance.

EVK-M8F: u-blox M8 Time & Frequency Reference evaluation kit, supports LEA-M8F



LEA-M8FTop View

1SDA2

SCL2

TxD1

RxD1

DSEL

VCC

GND

VCC_OUT

REF_FREQ_OUT

RESET_N

V_BCKP

SAFEBOOT_N

GND

GND

RF_IN

VCC_RF

V_ANT

FREQ_PHASE_IN1

SDA_DAC

SCL_DAC

VDD_USB

USB_DP

FREQ_PHASE_IN0

TIMEPULSE/TP2/SAFEBOOT_N

GND

GND

Reserved

2

3

4

5

6

7

8

9

10

11

12

13

14

28

27

26

25

24

23

22

21

20

19

18

17

16

15

USB_DM

InterfacesSerial interfaces SPI or UART and DDC (I2C compliant) USB v2.0 full speed (ext. voltage regulator)


Timing interfaces Timepulse output 2x timepulse/frequency inputs

POSI

TIO

NIN

G

Standard


| Timing and raw data modules

NEO/LEA-M8T u-blox M8 concurrent GNSS timing modules

Highlights


• Market leading acquisition and tracking sensitivity

• Optimized accuracy and availability with Survey-in and single-satellite timing

• Minimized power consumption with low duty-cycle operation

• Maximized reliability with integrity monitoring and alarms

• Multi-GNSS raw data, IMES message data

• Backward compatible with LEA-5T, LEA-6T and NEO-6T

Product descriptionThe NEO-M8T and LEA-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national require-ments. Enhanced sensitivity and concurrent dual-constella-tion reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduc-es power consumption for battery-powered applications.

u-blox timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital

LEA-M8T17.0 x 22.4 x 2.4 mm

NEO-M8T12.2 x 16.0 x 2.4 mm

Product selector

interference mitigation, supporting applications in wireless communications equipment.

The M8T timing modules are delivered in u-blox’ established LEA and NEO form-factors with standard pin-out, allowing ready migration from previous product generations.

u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.

u-blox M8 modules use GNSS chips qualified according to AEC-Q100, are manufactured in ISO/TS 16949 certified sites, and are fully tested on a system level. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.

= Optional, not activated per default or requires external components R = Galileo readyC = Crystal / T = TCXO


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

– 3.

6 V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

ope

n ci

rcui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

NEO-M8T • • R • • • • • • • • • • • • • • T

LEA-M8T • • R • • • • • • • • • • • • • T • • •


Timing and raw data modules |

Features – GNSS

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1C/C (subject to Firmware upgrade)Navigation Concurrent GNSS: up to 5 Hzupdate rate Position 2.5 m CEP (Autonomous) accuracyAcquisition GPS & GLONASS GPS & BeiDouCold starts: 26 s 27 sAided cold starts: 2 s 3 sSensitivity Tracking & Nav –167 dBm –165 dBmCold starts(aided): –157 dBm –151 dBm(autonomous): –148 dBm –148 dBmReacquisition: –160 dBm –160 dBmAssistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days) AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliantOscillator TCXORTC crystal Built-inNoise figure On-chip LNA (LEA-M8T) Extra LNA for passive antenna (NEO-M8T)

Features – Timing

Timing accuracy Clear sky: <_ 20 nsTime-pulse frequency 0.25 Hz – 10 MHzTime-pulse jitter ± 11 nsTime-mark resolution 21 nsIntegrity reports RAIM active, phase uncertainty time-pulse rate/duty-cycle

Features – Power management

Power-save Cyclic-continuous, on/offmodes low duty-cycleOff control Hardware, message interfaceOn control Hardware, wake-on UART activity, Timer (using low power RTC)Automatic on/off with configurable period (GPS only)

Support products

LEA-M8T u-blox M8 Timing GNSS evaluation kit

Package NEO-M8T: 24 pin LCC (Leadless Chip Carrier):12.2 x 16.0 x 2.4 mmLEA-M8T: 28 pin LCC (Leadless Chip Carrier):17.0 x 22.4 x 2.4 mm

Pinout

Environmental data, quality & reliabilityOperating temp. –40° C to +85° CStorage temp. –40° C to +85° CRoHS compliant (lead-free)Qualification according to ISO 16750Manufactured and fully tested in ISO/TS 16949 certified production sitesUses u-blox M8 chips qualified according to AEC-Q100

Electrical data

Power supply 2.7 V – 3.6 VPower 15 μA (Battery backup) consumption 30 μA (Software backup) 34 mA @ 3.0 V (Operational)1

11 mA @ 3.0 V Power Save Mode (1 Hz, GPS only)1

Backup supply 1.4 V – 3.6 V1 NEO-M8T


See datasheet

Features – Raw data and IMES

Raw data GPS, GLONASS, BeiDou, SBAS, SAIFconstellationsRaw data Carrier phase; code phase & pseudo- range doppler; navigation message payloadIMES bit rate 50 bps, 250 bps (auto-baud)IMES report output Beacon locationIMES raw data Message payload (all messages)

Interfaces

Serial interfaces SPI or UART and DDC (I2C compliant)Protocols NMEA, UBX binary, RTCMTime-pulse outputs 2Time-mark inputs 2

NEO-M8TTop View

1

2

3

4

5

6

7

8

9

10

11

12

24

22

21

20

19

18

17

16

15

14

13

23

GND Reserved/TP2

D_SEL

TIMEPULSE

EXTINT0

USB_DM

USB_DP

VDD_USB

RESET_N

VCC_RF

GND

GND

RF_IN

GND

VCC

V_BCKP

RxD

TxD

SCL

SDA

Reserved

Reserved

EXTINT1

ANT_ON

LEA-M8TTop View

1SDA

SCL

TxD

RxD

D_SEL

VCC

GND

VCC_OUT

Reserved

RESET_N

V_BCKP

Reserved/TP2

GND

GND

RF_IN

VCC_RF

V_ANT

RESERVED

RESERVED

RESERVED

VDD_USB

USB_DP

EXTINT0

TIMEPULSE

GND

GND

AADET_N/EXTINT1

2

3

4

5

6

7

8

9

10

11

12

13

14

28

27

26

25

24

23

22

21

20

19

18

17

16

15

USB_DM

POSI

TIO

NIN

G

Standard


| Dead Reckoning modules

NEO-M8L u-blox M8 ADR module including 3D sensors

Highlights

• 100% coverage using ADR technology

• 3D positioning

• Concurrent reception of GPS/QZSS, GLONASS, BeiDou, Galileo ready

• Up to 20 Hz position update rate

• Flexible orientation installation

• 3-axis accelerometer and gyroscope sensor included

Product descriptionThe NEO-M8L standalone module combines the high per-formance u-blox M8 concurrent positioning engine with u-blox’ 3D Automotive Dead Reckoning (ADR) technology, thus providing 100 % coverage and continuous 3D positioning for road vehicle applications.

The NEO-M8L module provides high sensitivity, fast GNSS signal acquisition and tracking with low system integra-tion effort. The module’s on-board 3D accelerometer, 3D gyroscope sensors, and self-calibrating speed-pulse input (hardware or message-bus) deliver a complete solution for road vehicle ADR applications. First-fit navigation and after-market Telematics installations are supported by straightforward one-time configuration for module orientation.

u-blox’ ADR and GNSS technologies deliver continuous, accurate positioning throughout the journey. Built-in dead reckoning sensors in conjunction with speed infor-mation from the vehicle provide navigation both before GNSS signals are acquired and during periods of signal loss. In difficult urban signal conditions u-blox’ tightly-

NEO-M8L12.2 x 16.0 x 2.4 mm

Product selector

R = Galileo ready D = Onboard 3D sensorsC = Crystal / T = TCXO


GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

& F

requ

ncy

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

NEO-M8L • • R • D • • • • • • • • • C • •

coupled navigation solution makes use of sensor data to deliver significant improvements in navigation accuracy during periods of unavailable or degraded GNSS signals.

With the introduction of 3D sensing and signal process-ing (for both acceleration and direction), the navigation range already improved by dead reckoning in tunnels and urban canyons extends to accurate navigation in multi-level highways and car-parks. 3D sensing also en-ables flexibility in orientation of the receiver with respect to the vehicle frame. NEO-M8L is therefore the perfect after-market dead reckoning product.

The DDC (I2C compliant) interface provides connectivity and enables synergies and simple integration with most u-blox cellular modules.

u-blox M8 modules use GNSS chips qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certi-fied sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmen-tal conditions and testing for electrical and electronic equipment”.


Dead Reckoning modules |









See datasheet

Features


Navigation Up to 20 Hzupdate rate

Position 2.0 m CEPaccuracy

ADR position (Estimated) < 3% of distance travellederror without GNSS


Sensitivity Tracking & Nav: –160 dBm1 Cold starts: –147 dBm Hot starts: –156 dBm

Assistance AssistNow Online AssistNow Offline (up to 35 days) AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant

Calibration Wheel tick: automatic Orientation: manual

Supported Active or passive antennaantennas


Data-logging For position, velocity, and time

1 Limited by FW for best DR performance

Interfaces


Digital I/O Configurable timepulse




Pinout

NEO-M8LTop View

1

2

3

4

5

6

7

8

9

10

11

12

24

22

21

20

19

18

17

16

15

14

13

23

GND Reserved

D_SEL

TIMEPULSE

WHEELTICK

USB_DM

USB_DP

VDD_USB

RESET_N

VCC_RF

GND

GND

RF_IN

GND

VCC

V_BCKP

RxD

TxD

SCL

SDA

NC

NC

FWD

ANT_ON

Support products



EVK-M8L: u-blox M8 3D Dead Reckoning GNSS evaluation kit, supports NEO-M8L

Electrical data


Power 31 mA @ 3 V (continuous,consumption default concurrent mode)

Backup supply 1.4 V – 3.6 VPO

SITI

ON

ING

Standard


| Precise positioning modules

NEO-7P u-blox 7 precise point positioning GNSS module

Highlights• High precision GNSS < 1 m

• DGPS by SBAS or RTCM


• Simple integration with u-blox cellular modules

• Backward compatible with NEO-6 and NEO-5 families

• Raw measurement data (GPS)

Product descriptionThe NEO-7P module combines the high performance of the u-blox 7 GNSS engine with precise point position-ing (PPP) technology for GPS. u-blox’ industry-proven PPP algorithm, in combination with SBAS, provides exceptional precision in clear-sky applications without the need for a reference station. This makes NEO-7P the ideal solution for many applications in surveying, marine navigation, agriculture, sports and leisure.

For world-wide application, the NEO-7P supports Differential GPS (DGPS) operation as an alternative to SBAS and PPP, using RTCM correction messages from a local reference station or aiding network. Ionospher-ic corrections received from regional SBAS satellites (WAAS, EGNOS, MSAS) enable the highest stand-alone positioning accuracy from the PPP algorithm. u-blox’ PPP also provides useful improvements in stand-alone precision even without SBAS. PPP delivers its full ben-efits after the first few minutes of operation with an unobstructed sky view.

NEO-7P12.2 x 16.0 x 2.4 mm

Product selector

= Optional, not activated per default or requires external components C = Crystal / T = TCXO

Model Type Supply Interfaces Features Type

GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.65

V –

3.6

V

2.7

V –

3.6

V

Low

est

pow

er (D

C/D

C)

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

Add

ition

al S

AW

Add

ition

al L

NA

RTC

cry

stal

Inte

rnal

osc

illat

or

Act

ive

ante

nna

/ LN

A s

uppl

y

Act

ive

ante

nna

/ LN

A c

ontr

ol

Ant

enna

sho

rt c

ircui

tde

tect

ion

/ pro

tect

ion

pin

Ant

enna

ope

n ci

rcui

tde

tect

ion

pin

Freq

uenc

y ou

tput

Stan

dard

Prof

essi

onal

Aut

omot

ive

NEO-7P • • • • • • • • • • • • • C

The entire NEO-7 series combines excellent sensitiv-ity with low power and includes variants optimised for cost and performance. The industry-proven NEO form factor allows easy migration from previous NEO generations. The NEO-7P features a front-end SAW RF filter for increased jamming immunity. This is reinforced by sophisticated RF-architecture and interference suppression, ensuring maximum performance even in hostile signal environments. UART, USB and DDC (I2C compliant) interfaces provide flexible connectivity and synergies with u-blox cellular modules. The NEO-7P’s internal Flash allows simple firmware upgrades.

u-blox 7 modules use GNSS chips qualified according to AEC-Q100 and are manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.


Precise positioning modules |










Features

Receiver type 56-channel u-blox 7 engine GPS L1 C/A, GLONASS L1 FDMA, QZSS L1 C/A, SBAS: WAAS, EGNOS, MSAS


Accuracy GPS GLONASSPosition: 2.5 m CEP 4 m SBAS: 2.0 m CEP n.a.SBAS + PPP: < 1 m CEP n.a.

Acquisition Cold starts: 30 s 32 sAided starts: 5 s n.a.Reacquisition: 1 s 1 s

Sensitivity Tracking: –161 dBm –158 dBm Cold starts: –147 dBm –139 dBm Warm starts: –148 dBm –145 dBm

Assistance AssistNow Online AssistNow Offline AssistNow Autonomous OMA SUPL & 3GPP compliant

Oscillator Crystal

RTC crystal Built-in


Memory Flash

Supported antennas Active

Interfaces





North

3 5

5

3

1

1

3 5

5

3

East East

North

Accuracy with PPP+SBAS(units in m)

Accuracy with GPS and SBAS(units in m)


Pinout

NEO-7PTop View

1

2

3

4

5

6

7

8

9

10

11

12

24

22

21

20

19

18

17

16

15

14

13

23

GND Reserved

D_SEL

TIMEPULSE

EXTINT

USB_DM

USB_DP

VDD_USB

RESET_N

VCC_RF

GND

GND

RF_IN

GND

VCC

V_BCKP

RxD

TxD

SCL

SDA

Reserved

Reserved

Reserved

ANT_ON

Electrical data

Power supply 2.7 V – 3.6 V

Power 22 mA @ 3 V (continuous)consumption 9 mA @ 3 V power safe mode (1 Hz)

Backup power 1.4 V – 3.6 V

POSI

TIO

NIN

G

Standard


| Previous generation modules

Previous generation modules

Overview

u-blox 6 / Fastrax positioning modules For new designs, please refer to the latest generation positioning module overview table on page 59.

LEA GNSS modules17.0 x 22.4 x 2.4 mm

NEO GPS modules12.2 x 16.0 x 2.4 mm

MAX GPS modules9.7 x 10.1 x 2.5 mm

u-blox 6 module Recommended for new designs

AMY-6 Please contact u-blox

MAX-6G MAX-7C, MAX-M8C

MAX-6Q MAX-7Q, MAX-M8Q

MAX-M5Q MAX-M8Q

NEO-6M/6G NEO-7M, NEO-M8M

NEO-6Q NEO-7N, NEO-M8N

NEO-6V Please contact u-blox

LEA-6N/S/A/H LEA-M8S

LEA-6R Please contact u-blox

u-blox 6 modules

Fastrax module Recommended for new designs

UP501 PAM-7Q

IT530 MAX-7Q, MAX-M8Q

IT530M MAX-M8Q

UC530 CAM-M8Q

UC530M CAM-M8Q

Fastrax modules

Previous generation modules |

u-blox cellular modules

u-blox wireless modules Recommended for new designs

FW2763p FW2770p

For new designs, please refer to the latest generation cellular module overview table on page 19.

POSI

TIO

NIN

G

| Positioning chips

Positioning chips

Positioning chips |

Based on a proprietary high-performance architecture with 72 parallel channels, u-blox’ powerful range of GNSS positioning chips are ideal for automotive, industrial and consumer applications.

Overview

= Optional, not activated by default D = Utility and development use only C/T = Crystal & TCXO supportedS = supported, may require ext. components V = VCTCXO support F = Flash required R = Galileo readyNote: for details about previous generation chips not shown, please visit our website.

Key benefits include• Ultra-fast acquisition time: Time-To-First-Fix (TTFF)

down to 1 second for hot and aided starts

• High sensitivity: Down to –167 dBm and –148 dBm for coldstart

• Automotive Dead Reckoning and Precision Timing options

• Intelligent, user configurable power management for radically lower power consumption

• Minimal board space, < 30 mm2, ideal for small end products with tight space and low cost requirements

• Minimal e-BOM, as few as 8 external parts

• Works with crystal or TCXO

• Anti-Jamming architecture allows easy embedding in noisy electronics

• Automotive grade versions

• Concurrent reception of GPS/QZSS, GLONASS, BeiDou, Galileo ready

• Assisted GNSS support (AssistNow)

Product selector: GNSS positioning chips

UBX-M8030-KT5.00 x 5.00 x 0.59 mm

UBX-M8030-CT2.99 x 3.21 x 0.36 mm

Model Package Type Supply Interfaces Features Grade

Pack

age

GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.4

V –

3.6

V

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

RTC

cry

stal

Inte

rnal

osc

illat

or

Ant

enna

sup

ply

and

supe

rvis

or

VC

TCX

O s

uppo

rt

Stan

dard

Prof

essi

onal

Aut

omot

ive

Pag

eStandalone GNSS chips

UBX-M8030-CT WL-CSP47 • • R • • • • • S S S C/T S 82

UBX-M8030-KT/KA QFN40 • • R • • • • • S S S C/T S 82

UBX-G7020-CT WL-CSP50 • • • • • • S S S C/T S 84

UBX-G7020-KT/KA QFN40 • • • • • • S S S C/T S 84

Dead Reckoning chips

UBX-M8030-KA-DRUBX-M8030-KT-DR

QFN40 • • R • F • • • • S S S C/T S 86

Timing chip

UBX-M8030-KT-FT QFN40 • • R • • • • D • S V • 88

UBX-M8030-KA5.00 x 5.00 x 0.59 mm


POSI

TIO

NIN

G

UBX-M8030 u-blox M8 concurrent GNSS chips

| Standalone positioning chips

Highlights



• Superior position accuracy in urban canyons

• Minimal board space, < 30mm2

• Minimal e-BOM, as few as eight external parts

• Exceptional jamming immunity

• Galileo ready

• Pin-compatible to UBX-G7020-KT/KA

Product descriptionThe UBX-M8030 standalone positioning chips from u-blox, featuring the high performance u-blox M8 position engine, deliver exceptional sensitivity and acquisition times. The chips utilize concurrent reception of GPS (QZSS) and GLONASS or BeiDou, or concurrent reception of GLONASS and BeiDou satellite signals. Reception from two constel-lations simultaneously allows extraordinary positioning accuracy in urban canyons, even with weak signals.

u-blox M8 chips feature low power consumption in concurrent reception mode, thanks to an innovative single- die architecture combined with sophisticated software algorithms. Even with weak signals, the power consumption remains low. In situations suited to single constellation reception, the total power consumption can be as low as 12 mW in Power Save Mode.

Sophisticated RF-architecture and interference suppression using active CW jamming detection ensure maximum performance even in GNSS hostile environments.

The extended voltage supply range and 1.8 V and 3.0 V I/O compliance support a wide variety of user applications.

UBX-M8030 chips are available in miniature WL-CSP and QFN packages. Featuring built-in LNA, LDOs and DC/DC converter, and a small external BOM, the UBX-M8030 en-ables ultra-small solutions with a footprint of only 30 mm2. Supporting TCXOs or lower price GNSS oscillators further ensures a minimal BOM.

Migrating existing u-blox 7 designs to u-blox M8 is simple, since the UBX-M8030 QFN chips’ hardware is completely backward compatible with u-blox 7 QFN chips. This enables fast migration and significantly reduces time-to-market.

The ultra small UBX-M8030-CT is the perfect choice for portable consumer applications with demanding size and cost constraints.

Rigorous automotive quality and manufacturing stan-dards, extended testing and low failure rate make the UBX-M8030-KA ideal for automotive applications.

UBX-M8030-KT5.00 x 5.00 x 0.59 mm

UBX-M8030-KA5.00 x 5.00 x 0.59 mm

UBX-M8030-CT2.99 x 3.21 x 0.36 mm

= Optional, not activated by default or requires external components S = supported, may require external componentsR = Galileo ready C/T = Crystal and TCXO supported

Product selector


Pack

age

GPS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.4

V –

3.6

V

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

RTC

cry

stal

Inte

rnal

osc

illat

or

Ant

enna

sup

ply

& s

uper

viso

r

Stan

dard

Prof

essi

onal

Aut

omot

ive

UBX-M8030-CT WL-CSP47 • • R • • • • • S S S C/T S

UBX-M8030-KT/KA QFN40 • • R • • • • • S S S C/T S


Features

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C (ext. Flash required)

Time-to-first-fix Cold start: 26 s Aided start: 2 s Hot start: 1 s

Sensitivity Tracking & Nav.: –167 dBm Reacquisition: –160 dBm Cold start: –148 dBm Hot start: –156 dBm

Max. nav. update rateSingle GNSS: up to 18 HzConcurrent GNSS: up to 10 Hz

Horizontal pos. accuracy 2.0 m CEP

Multi-GNSS AssistNow Online Assistance: AssistNow Offline (up to 35 days) AssistNow Autonomous (up to 6 days)

Oscillator: Supports GNSS crystal or TCXO

LNA: Built-in

RTC input: 32.768 kHz (optional), RTC can be derived from GNSS crystal or TCXO

Antenna Short and open circuit detectionsupervision: supported with external circuit

DC/DC converter: Built-in, external component required

Anti Jamming: Active CW detection and removal

SQI Flash FW update(optional) for: AssistNow Offline AssistNow Autonomous

Odometer: Travelled distance

Data-logging: For position, velocity, and time

Electrical data

Supply voltages 1.4 V – 3.6 V

Digital I/O 1.65 V – 3.6 V voltage level

Power 17.5 mA @ 3.0 V consumption (single GNSS, continuous mode) 24.5 mA @ 3.0 V (concurrent GNSS, continuous mode) 8.0 mA @ 1.4 V (PSM, 1 Hz update) 4.5 mA @ 3.0 V (PSM, 1 Hz update)


Packages

UBX-M8030-CT: 47 Pin WL-CSP 2.99 x 3.21 x 0.36 mm

UBX-M8030-KT/KA: 40 Pin QFN 5.00 x 5.00 x 0.59 mm




Humidity JEDEC MSL 1


Qualification according to AEC-Q100


Interfaces

Serial interfaces 1 UART 1 USB V2.0 compatible 1 DDC (I2C compliant) 1 SPI

Digital I/O 2 configurable time pulses 2 EXTINT interrupt inputs 2 PIO for antenna supervision

Memory SQI interface for optional FLASH

Support products



EVK-M8N: u-blox M8 GNSS evaluation kit, which supports TCXO-based u-blox M8 designs

EVK-M8C: u-blox M8 GNSS evaluation kit, which supports crystal-based u-blox M8 designs


See datasheet

Standalone positioning chips |

POSI

TIO

NIN

G

Standard


UBX-G7020 u-blox 7 GNSS chips

| Standalone positioning chips

Highlights


• Minimal board space, < 30 mm2


• Minimal e-BOM, as few as 8 external parts

• Exceptional jamming immunity

• Pin-compatible to UBX-M8030

Product descriptionThe high performance UBX-G7020 multi-GNSS chip supports GPS, GLONASS, QZSS and SBAS. It delivers exceptional sensitivity and acquisition times.

u-blox 7 features ultra low power consumption, thanks to innovative single die architecture and enhanced soft-ware algorithms. This gives the UBX-G7020 best in class power consumption for GLONASS reception.

The extended voltage supply range and 1.8 V and 3.0 VI/O compliance supports a wide variety of user appli-cations. Sophisticated RF-architecture and interference suppression using active continuous wave detection ensure maximum performance even in GNSS-hostile environments.

Product selector

The UBX-G7020 is available in your choice of minia-ture WL-CSP and QFN packages and features an ultra small solution footprint of only 30 mm2. The built-in LNA, LDOs and DC/DC converter, and on-chip ROM mean that only the smallest possible external BOM is required. By supporting TCXOs or lower price GNSS oscillators the UBX-G7020 further ensures a minimal Total-Cost-of-Ownership.

The ultra small UBX-G7020-CT is the perfect choice for portable consumer applications with demanding size and cost constraints. With its rigorous quality and man-ufacturing standards (AEC-Q100, ISO/TS 16949) the UBX-G7020-KA is ideal for automotive applications.

C/T = Crystal and TCXO supported S = supported, may require external components


Pack

age

GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.4

V –

3.6

V

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

RTC

cry

stal

Inte

rnal

osc

illat

or

Ant

enna

sup

ply

and

supe

rvis

or

Stan

dard

Prof

essi

onal

Aut

omot

ive

UBX-G7020-CT WL-CSP50 • • • • • • • S S S C/T S

UBX-G7020-KT/KA QFN40 • • • • • • • S S S C/T S

UBX-G7020-KT5.0 x 5.0 x 0.59 mm

UBX-G7020-KA5.0 x 5.0 x 0.59 mm

UBX-G7020-CT3.0 x 3.4 x 0.36 mm


Features

Receiver type 56-channel u-blox 7 engine GPS/QZSS L1 C/A, GLONASS L1OF SBAS: WAAS, EGNOS, MSAS


Accuracy GPS GLONASSPosition 2.5 m CEP 4.0 m CEP SBAS 2.0 m CEP

Acquisition Cold starts: 29 s 30 s Hot starts: 1 s 3 s

Sensitivity Tracking: –162 dBm –158 dBmCold starts: –148 dBm –140 dBmReacquisition: –160 dBm –156 dBm

Assistance AssistNow Online AssistNow Offline AssistNow Autonomous OMA SUPL & 3GPP compliant

LNA Built-In

Oscillator Crystal or TCXO

RTC input 32.768 kHz (optional). Real time clock can be derived from GPS crystal or TCXO


DC/DC converter Integrated


Memory Optional SQI Flash

Data logging* Continuous log of position, velocity & time* External FLASH required

Electrical data


Digital I/O 1.65 V – 3.6 V voltage level

Power 41 mW @ 1.4 V (continuous) consumption 9 mW @ 1.4 V (PSM, 1 Hz)


Package

UBX-G7020-CT: 50 Pin WL-CSP 3.4 x 3.0 x 0.36 mm 11.9 mg

UBX-G7020-KT/KA: 40 Pin MLF/QFN 5.0 x 5.0 x 0.59 mm 75 mg






Interfaces

Serial interfaces 1 UART 1 USB 1 DDC (I2C compliant) 1 SPI

Digital I/O 2 configurable time pulse 2 EXTINT interrupt inputs 2 GPIO for antenna supervision

Memory SQI interface

Support products



EVK-7N: u-blox 7 GNSS evaluation kit, with TCXO, supports u-blox 7 chips

EVK-7C: u-blox 7 GNSS evaluation kit, with crystal, supports u-blox 7 chips


See datasheet

Standalone positioning chips |

POSI

TIO

NIN

G

Standard


UBX-M8030-Kx-DR u-blox M8 3D Dead Reckoning GNSS chips

| Dead Reckoning chips

Highlights

• 100% coverage using ADR technology

• 3D positioning


• Galileo ready

• Up to 20 Hz position update rate

• Pin compatible with UBX-M8030-Kx

• Available in standard and automotive grade

Product descriptionUBX-M8030-Kx-DR is u-blox’ industry-proven off-the-shelf Automotive Dead Reckoning (ADR) solution. u-blox ADR combines concurrent GNSS and sensor digital data using a tightly coupled Kalman filter. This improves position accuracy during periods of unavailable or degraded GNSS signals.

ADR supports a variety of sensor combinations, such as wheel ticks, single-axis / 3-axis gyroscope, and single-axis / 3-axis accelerometer. The accelerometer sensor support improves performance during altitude changes without a GNSS signal, such as in tunnels, overpasses, or underground parking.

ADR receives sensor data from the vehicle bus via the

host processor. This reduces hardware costs since no extra sensors are required for dead reckoning functionality. ADR is designed for simple integration and easy configuration of different sensor options (e.g. DR with or without gyroscope) and vehicle variants, and is completely self-calibrating. The chips also provide improved support for map matching.

The UBX-M8030-KA-DR and UBX-M8030-KT-DR chips provide flash-based 3D-ADR features. The DR chips are pin compatible with standard UBX-M8030 chips.

The UBX-M8030-Kx chips are qualified according to AEC-Q100, and are manufactured in ISO/TS 16949 certified sites.

S = supported, may require external components R = Galileo readyF = Flash required C/T = Crystal and TCXO supported

Product selector


Pack

age

GPS

/QZS

S

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

1.4

V –

3.6

V

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

RTC

cry

stal

Inte

rnal

osc

illat

or

Ant

enna

sup

ply

and

supe

rvis

or

Stan

dard

Prof

essi

onal

Aut

omot

ive

UBX-M8030-KA-DRUBX-M8030-KT-DR

QFN40 • • R • F • • • • • S S S C/T S

UBX-M8030-KA-DR5.00 x 5.00 x 0.59 mm

UBX-M8030-KT-DR5.00 x 5.00 x 0.59 mm


Features


Time-to-first-fix Cold start: 26 s Aided starts: 2 s Hot starts: 1 s

Sensitivity Tracking & Nav.: –160 dBm1

Reacquisition: –160 dBm Cold start: –148 dBm Hot start: –156 dBm

Operational limitsMax. nav. update rate 20 HzMax. velocity 500 m/sVelocity accuracy 0.05 m/sHeading accuracy 0.3 degreesHorizontal pos. accuracy 2.0 m CEP

Sensor Pitch, roll, yaw alignment alignment by command

Wheeltick Supports low wheel ticks (1 tick < 50 cm travel distance)

Map Matching Aid for improved navigation

Multi-GNSS AssistNow OnlineAssistance AssistNow Offline (up to 35 days) AssistNow Autonomous (up to 3 days)

Oscillator Supports GNSS crystal or TCXO

LNA On-chip LNA

RTC input 32.768 kHz (optional), RTC can be derived from GNSS crystal or TCXO


DC/DC converter Built-in, external component required

Anti Jamming Active CW detection and removal

SQI flash Required for ADR

1 Limited by FW for best DR performance

Electrical data


Digital I/O voltage 1.65 V – 3.6 V

Power consumption 20 mA @ 3.0 V (single GNSS)(cont. mode) 26 mA @ 3.0 V (concurrent GNSS)


Package

UBX-M8030-KA-DR/ 40 Pin QFN: UBX-M8030-KT-DR: 5.00 x 5.00 x 0.59 mm

Interfaces

Serial interfaces 1 UART 1 USB V2.0 full speed 12 Mbit/s 1 DDC (I2C compliant) 1 SPI

Digital I/O Configurable time pulse 2 EXTINT interrupt inputs 10 configuration pins

Memory SQI interface






ADR performance and requirements

u-blox ADR supports standard sensor configurations: Rear wheel sensors, front wheel sensors, four wheel sensors, gyro + speedpulse + accelerometer (optional).

Sensor option Typical position errorFront wheels (2D): 14%Rear wheels (2D): 12% Four wheels (2D): 10%Gyro + speedpulse (2D): 3%Gyro + speedpulse + accelerometer (3D): 3%

Support products

Contact nearest u-blox representative.


See datasheet

Dead Reckoning chips |

POSI

TIO

NIN

G

Standard


UBX-M8030-KT-FT u-blox M8 time & frequency reference GNSS chip

| Time and frequency chips

Highlights• Concurrent reception of GPS/QZSS, GLONASS, BeiDou

• Direct control of system reference oscillator disciplined by GNSS

• Accurate measurement and control of external oscillators

• Industry leading acquisition sensitivity and single-satellite timing

• Automatic hold-over

• Prepared for integration with external PTP, Sync-E and network listen

Product descriptionu-blox time and frequency products provide multi-GNSS synchronization for cost-sensitive network edge equipment including Femto wireless base-stations. The M8030-KT-FT IC provides a complete GNSS receiver and reference frequency control function. This single-chip RF and baseband IC requires few external components: just a low-cost SQI Flash for program and parameter storage and passive components.

The M8030-KT-FT can control a system reference VCTCXO directly via its in-built PWM DAC, providing both frequency and phase coherence with the best available source of synchroni-zation. Additional remote oscillators may be controlled via a second DAC (DDC) or via the host system. External sources of synchronization are supported through time-pulse and frequen-cy inputs and a message interface. This allows measurements from macro-sniff, Sync-E, or packet timing to be combined with measurements from GNSS.

u-blox time and frequency products include timing integrity alarms that report phase and frequency uncertainty both during normal operation and hold-over. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design.

S = supported, may require external components R = Galileo readyV = VCTCXO support D = Utility and development use only

Product selector

UBX-M8030-KT-FT5.00 x 5.00 x 0.59 mm

Example application (Residential Femto Cell)In a Femto-Cell application, the M8030-KT-FT can make fine adjustments to the master reference frequency oscillator to precisely align the Femto-cell transmit framing with a phase reference from GNSS or PTP. In the absence of a reliable source of synchronization, the M8030-KT-FT automatically manages hold-over based on the stability of the oscillator selected, allowing the Femto-cell to continue transmissions. The M8030-KT-FT estimates phase and frequency uncertainty continuously during hold-over so the host system can decide when to discontinue transmission.


Pack

age

GPS

/ Q

ZSS

GLO

NA

SS

Gal

ileo

BeiD

ou

Tim

ing

Dea

d Re

ckon

ing

Prec

ise

Poin

t Po

sitio

ning

Raw

Dat

a

3.0

V –

3.6

V

UA

RT

USB

SPI

DD

C (I

2 C c

ompl

iant

)

Prog

ram

mab

le (F

lash

)

Dat

a lo

ggin

g

RTC

cry

stal

Osc

illat

or

Ant

enna

sup

ply

&

supe

rvis

or

VC

TCX

O s

uppo

rt

Stan

dard

Prof

essi

onal

Aut

omot

ive

UBX-M8030-KT-FT QNF40 • • R • • • • D • • S V •


Features

Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C (firmware upgrade required Flash)

GPS GLONASSAccuracy 2.5 CEP < 4 m CEP

Cold starts: 26 s 30 sHot/Aidedstarts 1 s 3 s

Sensitivity Tracking: –165 dBm –165 dBmCold start(aided): –157 dBm –148 dBm(autonomous): –148 dBm –145 dBmReacquisition: –160 dBm –157 dBm

Assistance AssistNow Online OMA SUPL & 3GPP compliant interface

Oscillator Supports VCTCXO

LNA Built-in


Supported Active and passiveantennas

External SQI Flash Required for firmware storage and upgrade

Features – synchronization

Frequency PWM DAC to control external VCTCXOcontrol:

Frequency GNSS locked: < 5 ppb control Frequencies: 19.2, 26, 30.72 MHz(primary Hold-over: Determined byoscillator) oscillator

Frequency GNSS locked: < 5 ppb control Frequencies: 10, 13, 19.2, 20, 26,(additional 30.72, 40 MHzoscillator Hold-over: Determined byoption) oscillator

Phase control Clear sky: < 20 ns Indoor: > 500 ns typ.

Time-pulse input Resolution: < 50 ns

Time-pulse-output Jitter: < 2 ns

Electrical data


Power consumption 30 mA @ 3.3 V

Package

UBX-M8030-KA-FT: 40 Pin QFN, 5.00 x 5.00 x 0.59 mm







Interfaces

Serial interfaces SPI or UART and DDC (I2C compliant) USB v2.0 full speed (ext. voltage regulator)


External DAC Dedicated DDC (master)

Timing Timpulse outputinterfaces 2x timepulse/frequency inputs

Support products



EVK-M8F: u-blox M8 GNSS evaluation kit for Time and Frequency reference


See datasheet

Time and frequency chips |

POSI

TIO

NIN

G

Standard


Positioning antennas

| Positioning antennas

Active GPS antennas |

ANN-MS High performance active GPS antennas

ANN-MS40 x 48 x 13 mm, 5 m coaxial cable

Highlights

• High performance active GPS antenna

• Low noise figure and high gain coverage

• Fast and easy integration

• No antenna know-how necessary

• Magnetic base suitable for mounting on car roof

• Industrial temperature range: –40°C to +85°C

Amplifier characteristics

Gain without cable Typ. 27 dBNoise figure Max. 1.8 dBOutput VWSR Max. 2.0DC voltage 2.7 V – 6 VDC current Typ 8.5 mA, ± 4.5 mA

Product descriptionThe high performance ANN-MS active GPS antenna with integrated low-noise amplifier (LNA) is the perfect match to u-blox GPS receivers where high sensitivity and optimum sky coverage are essential. ANN-MS offers the high performance to exploit the full capabilities of all u-blox GPS receivers, and can be operated at a supply voltage of 2.7 to 6 V.

Environmental data

Operating temperature –40°C to +85°CStorage temperature –50°C to +85°CHumidity 95% ~ 100% RHVibration Sine sweep 1G (0-Peak), 10 – 150 – 10 Hz each axis

CE approval

Applicable standards ETSI EN 301 489-19

Mechanical data

Weight 42 g (without cable)Size 40 x 48 x 13 mmCable 5 m RG174 standardConnectors (choice) SMA, SMB, MCX, FAKRAMounting Magnetic baseHousing color Black


See datasheetSamples available via u-blox’ Online shop atwww.u-blox.com/en/online-shop.html

Patch antenna characteristics

Frequency 1575 ± 3 MHzVSWR Max. 2Bandwidth Min. 10 MHzImpedance 50 Peak gain Min. 4 dBic (over 7 x 7 cm ground plane)Gain coverage (over 75% volume)Polarization RHCP (Right-handed circular polarization)

≥ –4 dBic

POSI

TIO

NIN

G


Services

| Services

Services |

Overview

Users expect instant position information. During cold start conditions, this is sometimes not possible because at least four satellites must be identified, and their complete orbital position data, called Ephemeris, received. Due to the low data rate of satellite signals (only 50 baud!) together with adverse geographical or city conditions, downloads from satellites can be unacceptably long, or even fail altogether.

u-blox’ AssistNow online service delivers global satellite position data 24/7

AssistNow™ global online service for accelerated positioning

Assisted GNSS (A-GNSS) accelerates calculation of posi-tion by instantly delivering the necessary satellite data. Ephemeris, Almanac, accurate time and satellite status are delivered to GNSS receivers via wireless networks such as GSM/GPRS or the Internet. The aiding data enables a GNSS receiver to compute a position within seconds, even under poor satellite signal conditions.

Based on information gathered from its global networkof satellite tracking stations, u-blox offers AssistNowservice to its worldwide customers via the Internetbased on a highly reliable online AssistNow Server.Both Online and Offline option are available.

u-blox also supports AssistNow Autonomous. Available on all u-blox 6/7/M8 GNSS receivers, this feature adds embedded satellite orbit prediction capability for even faster positioning without relying on any external aiding data.

Read about u-blox’ AssistNow service on page 102.

CellLocate®: hybrid solution for indoor positioning

u-blox’ proprietary cellular/GNSS positioning service merges mobile phone cell information with GNSS to improve positioning in areas where satellite signals are weak, jammed, or completely blocked.

CellLocate combines mobile cell and GNSS positioning data to deliver better results than either technology can accomplish alone:

• Positioning performance can be improved and extended to areas where satellite signals are 100% blocked, especially within buildings

• Eliminate “no-fix” scenarios by providing at least an approximate fix wherever cell phone coverage is available

• Overcome jamming scenarios to improve antitheft system performance

u-blox‘ CellLocate cellular positioning technology is a feature implemented in u-blox SARA, LEON and LISA GSM, UMTS and CDMA cellular modem families.

Read about u-blox’ CellLocate service on page 104.

Increased reliability and indoor positioningbased on mobile network attributes

SER

VIC

ES

AssistNow Online(connects at start-up)

| Services

The challenge of stand-alone GNSSGNSS users expect instant position information. With standard positioning this is often not possible because at least four satellites must be identified, and their complete orbital position data (called Ephemeris) received. Under adverse signal conditions, data downloads from the satellites to the receiver can take minutes, hours or even fail altogether.

Assisted GNSS (A-GNSS) accelerates calculation of position by delivering the necessary satellite data, including Ephemeris, Almanac, accurate time and satellite status, to the GNSS receiver via wireless networks or the internet. This aiding data enables a GNSS receiver to compute a position within seconds, even under poor signal conditions.

AssistNow A-GNSS ServicesAssistNow Online and AssistNow Offline are u-blox’ end-to-end A-GNSS services for OEM customers and their end users. These services boost GNSS acquisition performance for devices with or without network connectivity. AssistNow Online and AssistNow Offline can either be used alone or in combination.

AssistNow A-GNSS services require no additional hardware and generate virtually no CPU load. The system is very easy to implement and can be installed and operational within a day.

u-blox cellular modules feature an embedded AssistNow client making integration simple.

Assisted GNSS u-blox A-GNSS services

AssistNow OnlineWith AssistNow Online, an internet-connected GNSS device downloads assistance data from u-blox’ AssistNow Online Service at system start-up. The service works on all standard mobile communication networks that support Internet access, including GPRS, UMTS and Wireless LAN. No special arrangements with mobile network operators are needed to enable AssistNow Online, making this solution network operator independent and globally available. u-blox only sends ephemeris data for those satellites currently visible to the mobile device requesting the data, thus minimizing the amount of data transferred.

AssistNow OfflineWith AssistNow Offline, users download u-blox’ Differential Almanac Correction Data from the internet at their convenience. The correction data is then trans-ferred to the mobile terminal via TCP/IP, serial port, memory card, etc, and can either be stored in the GNSS receiver’s Flash EPROM (if available) or in the memory of the application processor. Therefore, the service requires no connectivity at system start-up and enables a position fix within seconds, even when no network is available.

u-blox provides correction data valid from 1 to 35 days. The size of these files increases with the length of the prediction period, from as little as 3 kB to 125 kB. Positioning accuracy decreases with the length of the correction data duration, with 1–3 day data providing relatively high accuracy and 10–35 day data progressively less accuracy. Regular updates help to ensure a high level of position accuracy.

True Orbit

Almanac

DifferentialAlmanac

Correction Data

AssistNow Offline(no connection needed at start-up)

Occasional updates of AssistNow Offlinedata via file transfer at user’s conveniece

Services |

Free and premium service optionsAssistNow data is collected by u-blox’ global array of satellite receivers, and maintained in real-time on u-blox AssistNow servers accessible via the Internet. For best-effort applications, u-blox provides AssistNow free-of-charge to its customers.

For applications requiring a guaranteed minimum Quality of Service (QoS), u-blox provides AssistNow Premium which provides guaranteed availability based on a service level agreement and 24/7 support.


Please contact u-blox to obtain access to the free AssistNow service.

This service is available to u-blox OEM customers.

Benefits of AssistNow• Fast Time-To-First-Fix, even under poor signal conditions• Global coverage• Network operator independent• No additional hardware required• Free best-effort service • Guaranteed QoS option for premium customers• Low CPU load• Available for all u-blox GNSS products• Easy to install and use• u-blox cellular modules include an embedded

AssistNow client for effortless implementation

AssistNow AutonomousAssistNow Autonomous is an embedded feature available free-of-charge that accelerates GNSS positioning by capitalizing on the periodic nature of GNSS satellite orbits. GNSS orbit predictions are directly calculated by the GNSS receiver and no external aiding data or connectivity is required. AssistNow Autonomous can be used alone, or together with AssistNow Online or AssistNow Offline for increased positioning speed and accuracy.

AssistNow Online AssistNow Offline AssistNow Autonomous

Data download frequency At every startup Once every X days Never

Data retrieval at start-upData downloaded from server

Pre-downloaded data from local memory

Retrived from local memory

Aiding data typeEphemeris, almanac, time, health

Differential almanac correction data

Automatically generated

Data validity period 2 – 4 hours 35 days Up to 6 days

Size of downloaded data 1 – 3 kB10 kB (1 day) ... 125 kB (35 days)

N.A.

Acquisition (TTFF) performance As low as 1 second As low as 5 seconds As low as 10 seconds

Free service Best-effort Best effort N.A.

Premium serviceGuaranteed availability based on service level agreement

Guaranteed availability based on service level agreement

N.A.

time

Non-volatile storage options forAssistNow Autonomous data

Battery Backup RAM: data for approx. 20 satellites

External Flash (optional): data for 32 satellites

Host (optional): data for 32 satellites and optional data

Legend

true satellite orbit

broadcast ephemeris orbit (downloaded from the satellite)

broadcast eph. used beyond validity period (unusable for navigation)

AssistNow Autonomous orbit (autonomously generated from broadcast ephemeris)

Flash

Legend

True satellite orbit

Broadcast ephemeris orbit (downloaded from the satellite)

Broadcast eph. used beyond validity period (unusable for navigation)

AssistNow Autonomous orbit (autonomously generated from broadcast ephemeris)

SER

VIC

ES

| Services

CellLocate® Objective Specification

Mobile network-based hybrid positioning

Increased reliability and indoor positioning based on mobile network informationAlthough it is a widespread and very effective technology, Global Navigation Satellite System (GNSS) positioning is not always possible, particularly in challenging signal environments such as urban canyons, indoors, in enclosed park houses, or when GNSS jamming signals are present. Performance can be improved by complementing the GNSS receiver data with information from mobile network cells that can benefit numerous applications. u-blox, through its in-house development of wireless data modules and GNSS receivers, has developed and embedded a cellular positioning technology, CellLocate, into its GSM, UMTS and CDMA cellular modules. This technology enables stand-alone location estimation based on surrounding mobile network information in conjunction with GNSS positioning data to improve positioning.

For any given location with cellular network coverage (GSM/GPRS, UMTS, CDMA), a specific combination of wireless cells will be visible. The proprietary CellLocate feature allows u-blox GSM/GPRS, CDMA and UMTS cellular modules to report to the CellLocate server those cells which are visibile at any specific location. This enables the server to estimate a coarse position on the basis of previous observations from other modules reporting the same cell visibility pattern, and this position is reported back to the module. The estimated position is then output by the module to the host processor via its serial port.

CellLocate database contains historic observations of cell A reported by several devices

CellLocate server defines area of cell visibility

New device observes cell A, position is estimated from the previous observations

Visibility of multiple cells provides even better coverage and accuracy

Cellular locationWireless cells are widely available in urban and rural environments enabling the CellLocate service to provide a position estimate virtually everywhere and under any conditions.

The service is offered free of charge on a best effort basis and the performance depends on the density of network cells and database population. A self learning mechanism is implemented allowing continuous database improvement and update in order to increase performance over time and prevent database aging.

CellLocate and hybrid positioningCellLocate and hybrid positioning are u-blox’ end-to-end services for OEM customers and their end-users. These services enhance and complement stand-alone GNSS acquisition performance when u-blox wireless modules and GNSS modules or chips are used.

Services |

2G / 3GNetwork

Customer application CellLocate serverCells info

Cellular locationu-blox system solution

GNSSWirelessmodem

DDC

CPU Globalreferencenetwork

u-blox implementation provides a single AT command interface enabling full control of the GNSS receiver and cellular positioning functionality in order to maximize performance and virtually eliminate any “no position scenario”. Through the single AT command interface it is possible to define all the positioning settings (cellular, stand-alone GNSS, GNSS aiding data) and enable the wireless module to optimize positioning performance.

CellLocate and hybrid services are fully integrated into u-blox wireless modules and work in parallel to normal module functionality.While stand-alone CellLocate is able to estimate position even when the GNSS signal is completely absent, hybrid positioning technology provides even better performance by using a combination of complementary positioning methods.

Benefits of CellLocate and hybrid positioning

• Position available even in areas of poor or no GNSS signal reception

• Network operator independent

• Easy to integrate into end applications

• No additional hardware required

• Free best-effort service

• Supported by all u-blox GSM/GPRS, UMTS/HSPA and CDMA 1xRTT modules

228-02-5DCB-5272228-02-5DCB-52F2228-02-5DCB-52F4228-02-5DCB-D059228-02-5DCB-D05C228-02-5DCB-D061

228-02-5DCB-52F2228-02-5DCB-D059228-02-5DCB-D05C228-02-5DCB-D061228-02-5DCB-FFFF

228-02-5DCB-5272228-02-5DCB-52F4228-02-5DCB-D055228-02-5DCB-D059228-02-5DCB-D05B228-02-5DCB-D05C228-02-5DCB-D061

228-02-5DCB-52F4228-02-5DCB-D055228-02-5DCB-D059228-02-5DCB-D05B228-02-5DCB-D05C

CellLocate enabled devices SARA-G340SARA-G350LEON-G100 LISA-C200 LISA-U2xx SARA-U2xx

Supported network technologies GSM/GPRSCDMA 1xRTTUMTS/HSPA

GNSS aiding settings Stand-alone, AssistNow Online/Offline/Autonomous

Data size* Uplink: 100-200 BytesDownlink (position only): 150 BytesDownlink (including GNSS aiding data): 1 – 3 kB

*) Data size depends on the number of visible cells and user selected GNSS aiding data


Please contact u-blox for more information.

SER

VIC

ES

mailto:mailto:info%40u-blox.com?subject=CellLocate

Support

| Support

Support |

Overview

TOBY-L2 LTE evaluation kit EVK-L2x

Support and evaluation toolsu-blox’ worldwide offices provide you with Wireless and positioning technology experts to ensure the success of your designs (see list of our global locations on page 126). u-blox also gives you comprehensive interactive support software for evaluation, design-in, testing and performance visualization of all its wireless and positioning products. Based on a sophisticated graphical user interface, the u-center and m-center PC software supports our GNSS and wireless modules and may be downloaded free-of-charge from our website. See pages 110 and 111 for details.

Evaluation kits for u-blox’ wireless and positioning products plus application boardsare also available. Software tools for the evaluation, visualization and configuration of our cellular, Wi-Fi, Bluetooth and positioning products can be downloaded from our website free-of-charge. For more information please visit our website at www.u-blox.com/en/support-section.html.

Evaluation kits and samples can be ordered via our online shop or ordered via an authorized u-blox representative or sales office.

Visit our Online shop at www.u-blox.com/en/online-shop.html.

Global online servicesu-blox also provides globally accessible, highly-reliable internet-based online services for Assisted GNSS (AssistNow, see page 94). AssistNow provides optional support to all u-blox satellite receivers worldwide with accurate satellite position aiding data to dramatically reduce Time-To-First-Fix, especially during cold start and weak signal conditions.

u-blox also provides it‘s CellLocate online service free of charge to facilitate indoor positioning. The service capitalizes on hybrid GNSS/cellular positioning to provide a fix when satellite signals are weak or absent. CellLocate supports u-blox‘ SARA, LEON GSM, LISA UMTS and TOBY LTE wireless modem series.

Complete documentationu-blox provides our customers with a complete set of technical documentation and support firmware supporting all u-blox based products including:

• Datasheets

• Application notes

• System integration manuals

• Protocol specifications

• Module firmware and USB device drivers

• Evaluation and integration software for Android

• GPS tutorial

• Field test reports

• Product change notifications

Documentation and software are available free-of-charge via our website. Our extensive archive of technical documents is searchable via the “Search Website” field at the upper right of every page of our website, www.u-blox.com.

SUPP

OR

T

http://www.u-blox.com/en/support-section.html



Evaluation kits and toolsDesign tools for u-blox wireless and positioning products

| Evaluation kits and tools

The following evaluation kits support u-blox cellular products:

GSM/GPRS evaluation kits:

• EVK-G20 supports LEON-G100 module

• EVK-G31/G35 supports SARA-G3 module series

UMTS/HSPA (WCDMA) evaluation kits:

• EVK-U20/U23 supports LISA-U2 module series

• EVK-U26/U27 supports SARA-U260, SARA-U270, SARA-U280

CDMA2000 evaluation kits:

• EVK-C20 supports LISA-C200

• EVK-D10 supports FW2770p

LTE evaluation kits:

• EVK-L10 supports TOBY L100

• EVK-L10M supports MPCI-L100

• EVK-L2x supports TOBY-L200, TOBY-L210

Cellular adapter boards:

• ADP-G200 supports LEON-G100

• ADP-G350/G310 supports SARA-G3 modules

• ADP-C200 supports LISA-C200

• ADP-U200 supports LISA-U200, ADP-U230 supports LISA-U230

• ADP-U260 supports SARA-U260, ADP-U270 supports SARA-U270

• ADP-L200 supports TOBY-L200, ADP-L210 supports TOBY-L210

Cellularevaluation kits

The following evaluation kits support u-blox short range products:

Classic Bluetooth and Bluetooth low energy kits:

• EVK-OBS419 supports OBS418 / OBS419 module series

• EVK-OBS421 supports OBS421 module

• EVK-OLS425 supports OLS425 module

• EVK-OLP425 supports OLP425 module

Wi-Fi and Multiradio kits:

• EVK-W16 supports ODIN-W16 module series

Short range wireless evaluation kits

Evaluation kits and tools |

The following evaluation kits support u-blox positioning products:

Positioning chips & modules with TCXO:• EVK-M8N supports UBX-M8030 chips with TCXO, MAX-M8Q, MAX-M8W,

NEO-M8N, NEO-M8Q, LEA-M8S• EVK-7N supports UBX-G7020 chips, MAX-7Q, MAX-7W, NEO-7N

Positioning chips & modules with crystal:• EVK-M8C supports UBX-M8030 chips with crystal, MAX-M8C, NEO-M8M• EVK-M8EVA supports EVA-M8M• EVK-7C supports UBX-G7020 chips, MAX-7C, NEO-7M• EVK-7EVA supports EVA-7M

Positioning antenna modules:• EVK-M8CAM supports CAM-M8• EVK-7PAM supports PAM-7Q

Positioning chips & modules with Dead Reckoning: • EVK-M8L supports NEO-M8L

Positioning module with Precise Point Positioning:• EVK-7P supports NEO-7P

GPS chip & modules with Precision Timing:• EVK-M8F supports UBX-M8030-KT-FT, LEA-M8F• EVK-M8T supports LEA-M8T, NEO-M8T

Positioning evaluation kits

Note: most evaluation kits and application boards can be ordered via u-blox’ Online Shop.

u-blox application boards are complete, integrated solutions.

Positioning solutions:• C88-7M/M8M application board in NEO form factor with EVA-7M or

EVA-M8M GNSS receiver

Telematics solutions:u-blox telematics application boards are for applications such as fleet management, asset tracking, road pricing, and security/surveillance.

• C16-U20/C20/G35 application board with u-blox GNSS receiver, LISA-U2 or LISA-C2 or SARA-G350 cellular module, and integrated GNSS and cellular antennas

Internet of Things solutions:• C027-C20/U20/G35 mbed enabled Internet of Things starter kit with u blox GNSS

receiver and LISA or SARA cellular module

Upon request to regional sales channels, u-blox provides reference designs and blue-prints dedicated to specific applications.

Application boards

SUPP

OR

T

http://www.u-blox.com/de/online-shop.html

| Evaluation software

u-centerPositioning evaluation software

Highlights• Interactive and easy to use

• Extensive GNSS configuration and control features

• Supports all u-blox positioning products

• Access to all controls and output messages

• Enables comparative performance analysis of posi-tioning products that output NMEA messages

• Free of charge

u-center includes• Support for NMEA and u-blox UBX binary protocol

• Integrated AssistNow A-GNSS client functionality

• Structured and graphical data visualization in real-time:

o Satellite summary view (SV) o Navigation summary view o Compass, speedometer, clock, altimeter o Chart view of any two parameters of choice o Data recording and playback functionality

• Docking views (real-time cockpit instruments): Satellite constellation, compass, clock, altimeter, speedometer, GNSS and satellite information views

• Full cut-and-paste functionality to transfer informa-tion to standard PC application software

• Firmware update feature for u-blox receivers

Visualization

Docking views with real-time cockpit instruments and satellite status charts allow easy observation of the stat-ic and dynamic behavior of u-blox positioning products.

To visualize positions and traveled routes on maps, easy-to-use interactive functions are provided that en-able importing a map file and entering three geodetic positions in order to calibrate the map so the measured positions are placed correctly on the map. Output posi-tion to Google Maps and Google Earth.

Data analysis

u-center allows the user to choose from a large number of parameters to create tabular views, 2D charts, histo- grams and compute statistics. Tabular views can be copied and inserted into commercial software like Microsoft Excel spreadsheets.

Product descriptionThe u-center positioning evaluation software provides a powerful platform for product evaluation, configura-tion, testing and real-time performance visualization of u-blox positioning receiver products. u-center provides AssistNow client functionality for A-GNSS. Its unique flexibility makes u-center the ideal tool through the entire system integration process.

Configuration and control options

u-center provides a convenient means to configure the GNSS receiver, to save customized configuration settings in the receiver Flash and to restore factory set-tings if needed. Toolbar buttons are available to control settings such as to force cold, warm and hot starts.

Hardware platform

u-center supports PCs running Windows 7, 8 and WIndows Vista, or Windows XP.


u-center is available free of charge and can be down-loaded from our website www.u-blox.com:Support -> Kits & tools -> Evaluation software section


Evaluation software |

m-centerWireless evaluation software


m-center is available free of charge and can be down-loaded from our website www.u-blox.com:Support -> Kits & tools -> Evaluation software section.

Configuration and control options

m-center provides a convenient means to configure u-blox’ wireless modules and save the configuration in the module Flash. It is also possible to view and edit SIM phonebook entries, send text messages, and communi-cate with the wireless module using AT commands.

m-center can be used to restore the wirless module’s factory default settings and to perform traces. In addition, when using u-blox wireless evaluation kits, m-center allows for simple communication with the onboard GNSS module.

Hardware platform

m-center supports PCs running Windows 8, Windows 7 or WIndows Vista.

Product descriptionThe m-center wireless evaluation software is a powerful and easy to use tool for evaluating, configuring, and testing of u-blox wireless modules. It includes an intuitive, easy to understand and easy to use graphical interface. m-center is available free-of-charge.

Highlights• Allows simple evaluation of SARA, LEON,

LISA-U, and TOBY wireless modules

• Interactive and easy to use

• Access to main functionality and configuration parameters

• Learn AT commands using the GUI interfaces thanks to embedded AT Terminal

• Trace GSM/GPRS/UMTS module activity

• Free of charge

m-center includes• AT command terminal with user defined commands

• PIN management

• Call management

• SMS management

• GPRS context configuration

• Communication with u-blox GNSS modules

• Intelligent driver detection

Visualization

The very simple graphical user interface allows the user to perform common GSM/GPRS/UMTS tasks and the embedded AT terminal shows all the AT commands trace in order to decrease the learning curve of the AT commands set. All the AT terminal activity can be saved to a text file.

Enabling the trace feature allows users to save internal GSM/GPRS/UMTS module activity to facilitate sending of binary data to u-blox customer support.

SUPP

OR

T


| Evaluation software

Android solution / u-center Android Evaluation & integration software for Android positioning

Highlights• Allows easy integration of GNSS functionality in

Android-based products

• Royalty-free GNSS library, licensed for reuse in cus-tomer products

• GNSS evaluation and visualization app

u-blox Android solution includes• GNSS driver library

• SUPL client

• u-center Android GNSS evaluation App

• Documentation explaining implementation

Solution descriptionu-blox’ GNSS Android solution enables customers to easily integrate and evaluate GNSS functionality in their Android-based end products. The solution includes A-GNSS capabilities for high performance GPS as well as Terminal and Network based positioning on mobile operator networks.

u-blox Android GNSS solution is available free of charge. The royalty-free GNSS hardware driver library is licensed for re-use in customer products and available upon request.

u-center Android GNSS evaluation App

The u-blox Android solution includes u-center Android, a specially modified Android version of u-blox’ powerful GNSS evaluation tool. u-center Android enables the visualization of location data and GNSS status published by the Android framework.

Messages and satellite information

u-center Android allows you to check the NMEA mes-sages from the receiver and the basic information of each satellite (e.g. azimuth, elevation, status).

Supported Products

Solution supports all u-blox positioning products.

System requirements

u-center Android supports Android versions 2.1 and above.GNSS Driver Library supports Android versions 2.3 to 4.0.

Testing and analysis

Cockpit type instruments, a wide range of tabular and graphical viewing tools as well as statistics functions are available to make testing and analysis easy. Features in-clude visualization of all visible GNSS satellites including signal strength and position, heading, altitude, velocity and GNSS time-of-day.

Visualization

u-center Android allows you to visualize GNSS traces on top of picture files of maps of any scale. A quick look at a trace on a map reveals a lot about the GNSS receiver’s performance. This feature is only available with devices supporting Google Maps.


For further details and to obtain u-blox’ GNSS Driver Library, please contact the u-blox sales representative nearest you. To download u-center Android visit our website or the Android Market: play.google.com/store/apps/details?id=com.ublox.ucenter

http://play.google.com/store/apps/details%3Fid%3Dcom.ublox.ucenter

http://play.google.com/store/apps/details%3Fid%3Dcom.ublox.ucenter

Middleware |

RIL software for wireless modulesRadio interface layer for u-blox wireless modems

Highlights• Quick and easy integration of u-blox wireless modules into Android, Windows Embedded and

Windows Mobile based designs• Free of charge for u-blox customers

Features• Complete source-code of RIL library• PC-based simulator• Comprehensive documentation explaining implementation

Product descriptionu-blox RIL (“Radio Interface Layer”) software allows easy integration of u-blox wireless modules into Android and Windows Embedded based designs.

The software is available free of charge for u-blox customers.

The solution includes• PC-based simulator This simulator enables quick evaluation of u-blox RIL

software. The simulator is a stand-alone tool that can be installed on a PC running Windows XP, or Windows Vista. An evaluation kit can be connected to the PC and customers can run an application on the simulator.

• RIL libraries This is the source code of u-blox RIL libraries. The

source code can be integrated into an Android or Windows Embedded / Windows Mobile environment.

• Operating systems supported Android 2.3 (Gingerbread)

Android 4.0 (Ice cream sandwich)Android 4.1 (Jelly Bean)Windows Embedded 6.0 (Win CE)Windows Embedded 7.0Windows Mobile 6.5

• Wireless modules supportedSARA-G3 series (Android 2.3, 4.1, Embedded Windows 6.x 7.x, Windows Mobile 6.5)LEON-G100 (Android 2.3, 4.1, Embedded Windows 6.x, 7.x, Windows Mobile 6.5)LISA-U2 series (Android 2.3, 4.0 & 4.1, Embedded Windows 6.x 7.x, Windows Mobile 6.5)FW2763p (Android 2.3)FW2770p (Android 2.3)TOBY-L1 series (Android 4.0)

For more details, visit www.u-blox.com/en/support-section.html or contact the u-blox sales representative nearest you.

Wireless device

u-bloxwireless module

Internet

Application

Middleware

ApplicationFramework

Kernel

ServiceDataSMSVoice

RIL libraries

UARTUSB SPI

Phone

Application software

Kernel

u-blox RIL software

u-blox wireless module

Micro-processor

SUPP

OR

T



Technology

| Technology

Technology |

Whether for professional applications such as fleet management or asset tracking, vehicle services such as eCall / ERA-GLONASS, remote metering, security and surveillance systems or consumer devices such as smartphones, tablets and personal trackers, u-blox has the right technology to deliver the sensitivity, connectivity, noise immunity, low-power and compact size required by today’s and tomorrow’s demanding applications.

u-blox’ module roadmap philisophyWhen it comes to GNSS modules, u-blox adheres to a core design philosophy: maintain module form factor and footprint continuity to allow customers to easily upgrade their products with each successive generation of u-blox positioning modules.Read more on Page 116

Cellular module layout compatibilityWhen designing cellular modem products that mustaccommodate 2G/3G/4G variants, PCB layout issues can generate a long list of expensive design andlogistic problems. The best way to avoid this issue is simple: layout compatibility across the entire range of cellular modems.Read more on Page 117

LTEu-blox is addressing this rapidly expanding market for LTE connectivity through in-house 4G modem chip technology. Based on “Software Defined Modem” (SDM) design methodology, u-blox’ strategy is to design and test advanced modem products with specific M2M functionality in software.Read more on Page 118

u-blox M8 and u-blox 7

u-blox has developed GNSS silicon receiver engines that support all deployed as well as upcoming standards. This includes support for both concurrent multi-GNSS reception for high performance (u-blox M8), as well as single reception mode for power-optimized operation (u-blox 7).Read more on Page 119

Bluetooth technology Bluetooth technology (IEEE 802.15.1) is well suited for wireless integration of devices used for automation in serial, fieldbus, Ethernet networks, instrumentation and automotive applications. u-blox Bluetooth modules are suited for devices requiring small footprint, low power consumption and cost-efficiency.Read more on Page 120

Wi-Fi technologyWi-Fi (IEEE 802.11), a wireless technology deployed around the world to provide internet “hot-spots”, is also well suited for monitoring, configuration, data acquisition, as well as time critical control applications. The built-in roaming functionality is also useful in factory automation applications with moving devices.Read more on Page 121

3D Automotive Dead Reckoning When satellite signals are blocked (e.g. in tunnels orindoor car parks) u-blox’ Automotive Dead Reckoning(ADR) technology allows uninterrupted vehiclenavigation based on heading, distance and vertical displacement data provided by external sensors.Read more on Page 122

GNSS antenna modulesu-blox offers two different kinds of GNSS antenna modules. These surface-mount components are complete GNSS receivers with integrated antenna.The result is a complete, high-performance positioning solution allowing for easy integration and fast time- to-market through simplified design and logistics.Read more on Page 123

Precise Point Positioning (PPP)For mapping, marine, and recreational applications,PPP provides sub-meter accuracy based on u-blox’single-frequency receiver and proprietary algorithm combined with ionospheric correctional data such as SBAS.Read more on Page 124

Precision Timing and Frequency Reference u-blox’ GPS clock synchronization technology allows globally distributed computer and telecom systems to synchronize their clocks as well as generate accurate reference frequences continuously and cost effectively.Read more on Page 125

Overview

TEC

HN

OLO

GY

| Module roadmap philosophy

u-blox’ module roadmap philosophyForm factor and layout consistency

When it comes to modules, u-blox adheres to a core design philosophy: maintain form factor and software continuity to allow customers to easily upgrade their products with each new generation of u-blox position-ing or cellular modules.

The key benefit is simple: customers do not need to keepchanging their PCB designs whenever u-blox introduces an improved version of its module products. Simply drop in the next generation module on the existing PCB and start testing! As a leading global supplier of wireless and GNSS modules, u-blox has established these compact module form factors as de-facto industry standards:

1) Leadless Chip Carrier 2) Land Grid Array

These form factors establish the base of our positioning and cellular module families, a philosophy that has been consistently applied over previous generations. In addition to providing a smooth upgrade path for your designs, form factor consistency allows for easy

interchanging of module family members to adapt to end-product variants targeted at specific regions or feature-sets. This applies especially to u-blox’ cellular 2G/3G/4G module products.

SARA

LEOn

LISA

Series

LEA

nEO

EvA

Series Package/dimensions Features

Package/dimensions Features

43-pin LGA2

7.0 x 7.0 mm

24-pin LCC1

12.2 x 16.0 mm

28-pin LCC1

17.0 x 22.4 mm

96-pin LGA2

16.0 x 26.0 mm

50-pin LCC18.9 x 29.5 mm

76-pin LCC22.4 x 33.2 mm

Universal UMTS/HSPA(+) and CDMA200 modules

Full-featured GSM/GPRS modules

Small, scalable, low-power GSM/GPRS, UMTS modules

Feature-rich GNSS modules

Flexible, configurable GNSS modules

Industry’s smallest standalone GNSS modules

Positioning modules

TOBY152-pin LGA2

24.8 x 35.6 mmHigh-speed LTE modules

Cellular modules

MAX 18-pin LCC1

9.7 x 10.1 mmHigh-performance, compact GNSS modules

CAM31-pin LCC1

9.6 x 14.0 mm Concurrent GNSS antenna modules

Nested design |

Cellular module layout compatibilityUpgrade smoothly with nested GSM/UMTS/CDMA/LTE designs

This is why u-blox has maintained form-factor compat-ibility throughout its GSM/GPRS (SARA/LEON), UMTS/HSPA/CDMA2000 (LISA), and LTE (TOBY) cellular module families.

To facilitate nested designs, u-blox provides application notes and PCB reference designs with schematics, Gerber files and bill of materials for 1.8 V and 3.0 V systems.

Example of 2G/3G/4G layout compatibility:nested design accommodates SARA GSM, LISA UMTS/CDMA and TOBY LTE modules on the same footprint

When designing cellular modem products that must accommodate GSM, UMTS, CDMA, or LTE variants as well as region-specific versions requiring different frequency bands, PCB layout issues can generate a long list of expensive design and logistic problems.

The best way to avoid this issue is simple: layout com-patibility across the entire range of cellular modems. With this solution, a single PCB layout can be designed for use by all end-product variations.

LEON-G100 GSM/GPRS module

SARA-G3 GSM/GPRS modules

LISA-U2 series UMTS/HSPA(+) modules

LISA-C200 CDMA2000 1xRTT modules

TOBY-L1/L2 LTE modules

Layout compatible with

Nested design combination chart for u-blox cellular modules

TEC

HN

OLO

GY

LTE Fastest growing standard in telecom history

In-house 4G LTE protocol stack

u-blox has also developed 4G LTE protocol stack tech-nology. Together with SDM modem design capability, u-blox aims to become a leading 4G LTE multimode modem provider based on in-house intellectual proper-ty. This will allow us to quickly address demands of the dynamically changing markets for M2M modems.

At u-blox we are excited about the 4G LTE-connected future and are working with pioneering companies right now to bring new products to market.

We recently launched the TOBY-L2 range of compact, cost-optimized LTE data modems based on u-blox’ nested design philosophy. Refer to page 34 for more details.

TOBY-L2 series modules support multi-band LTE-FDD, along with HSPA+ and GPRS/ EDGE in a very small LGA package. The modules support LTE Cat 4 which provides data through-put up to 150Mb/s, the modules are ideal for both industrial and consumer applications requiring the

highest data-rates, as well as 2G and 3G network cov-erage. Mini PCI form factor is also supported (MPCI-L2).

See pages 32 – 38 for our full line of LTE multimode and LTE-only module products.

| LTE

Data has taken over as the driver of mobile network technology. Voice, now a commodity, has been replaced by latency-sensitive multimedia and video-rich applications and services as the main revenue gener-ator. This is why operators are rapidly rolling out 4G LTE, making it the fastest growing telecommunications standard in history.

LTE M2M applications

Ultimately, LTE connected devices will exceed human mobile phone users: the number of LTE connected M2M devices is forecast to exceed all other types of connected devices by 2020. Although typical data rates for M2M communication today are much lower than the data rates for which LTE is designed, specific M2M applications will be either created or enhanced to take advantage of the available bandwidth. New LTE-based M2M applications include:

• Wireless router for in-car infotainment systems

• Telehealth terminals providing remote diagnosis and healthcare

• Multimedia signage and advertisement displays

• Remote wireless surveillance cameras

• Vending machine monitoring with video commercial display

• Retail terminals displaying product demonstrations or live helpdesk

• Facial recognition systems used in homeland security

• Unmanned video drones used for surveying, utilities inspection, security, traffic, accident, crowd control and fire monitoring

Software defined modem (SDM)

u-blox is addressing this rapidly expanding market for LTE connectivity through in-house 4G modem chip technology. Based on “Software Defined Modem” (SDM) design methodology, u-blox’ strategy is to design and test advanced modem products with specific M2M functionality in software. The SDM approach significantly shortens development time as iterative silicon fabrication cycles can be eliminated. Ultimately, SDM will enable u-blox to deliver multimode wireless products which are able to meet user, market or local environmental conditions as they arise.

u-blox M8 and u-blox 7 |

u-blox M8 and u-blox 7

With the launch of the u-blox M8 platform, u-blox con-tinues establishing its leadership in embedded global satellite positioning. Combining advanced chip technol-ogy, sophisticated software algorithms, true concurrent GNSS satellite reception and multi GNSS aiding services, u-blox M8 sets the benchmark for navigation and positioning.

u-blox M8 complements our u-blox 7 platform, offering new solution alternatives depending on application needs – whether that be for high performance, low power, or low cost. The two platforms are based on the the UBX-M8030 concurrent-GNSS, and UBX-G7020 single-GNSS chip families. The chips form the basis of u-blox’ popular MAX, NEO and LEA GNSS module series (for an overview of all modules, see page 59.

u-blox M8: high performance positioning

u-blox M8 acquires and tracks two GNSS systems concurrently (e.g. GPS and GLONASS). Optimized signal reception circuitry in combination with software algorithms and advanced tracking and search engines capitalize on the quality, and not only the quantity, of satellites used, providing optimal solutions in GNSS hostile environments.

With market leading –167 dBm dynamic sensitivity, 1 second TTFF and 2 meter positioning accuracy, u-blox M8 is the perfect solution for performance critical appli-cations like car navigation, drive recorder or emergency call systems. For such applications, high performance is key. By utilizing the new u-blox Multi GNSS AssistNow service and local satellite augmentation services (SBAS, QZSS), u-blox M8 provides even more accurate position information within seconds – virtually anywhere.

A comprehensive approach to multi-GNSS positioning

All in all, u-blox M8 is the perfect choice for high performance positioning applications, bringing the increased performance of concurrent GNSS reception to practical application. By applying an external SQI flash, u-blox M8 is also future-proof, as firmware updates easily can be made, for example adding Galileo when it becomes fully operational.

u-blox 7: low-power, low-cost positioningIn case of less critical applications requirements where the important key parameters are low power and low cost, u-blox 7 is the perfect answer. u-blox 7 is optimized for low-cost, low-power applications where single-GNSS reception is sufficient. u-blox 7 is one of the lowest power multi-GNSS receiver platform on the market, particularly attractive for small battery powered devices like asset and vehicle tracking boxes. In case of rural or suburban areas, the u-blox 7 single GNSS reception is more than sufficient to provide accurate and reliable positioning information. u-blox 7 supports single reception of either GPS or GLONASS, selectable on start-up by command.

Both receiver chips come in QFN40 packages in stan-dard and automotive grades. Chip scale packages are also available for commercial applications. u-blox M8 QFN package is pin compatible with u-blox 7 QFN pack-age, and extensive documentation makes migration easy.

u-blox GNSS modules

u-blox chips are at the heart of our industry-standard GNSS module families which are designed to satisfy size versus feature requirements of a large range of applica-tions : EVA, MAX, NEO, LEA, CAM and PAM (refer to u-blox’ complete GNSS module selector table).

EVA MAX NEO CAM

All u-blox GNSS products continue to leverage the synergies with our broad portfolio of GSM, UMTS, CDMA and LTE cellular modules to enable location awareness, including support for our unique CellLocate hybrid indoor positioning system.With our compre-hensive portfolio of GNSS chips and modules, our goal is simple: to support your product innovation while making it easy to upgrade from one product generation to the next.

UBX-M8030:Concurrent, high performance

positioning

UBX-G7020:Low-power, low-cost

positioning

u-blox M8 is the first mass produced stand-alone re-ceiver to include BeiDou reception. With the concurrent reception of GPS and BeiDou, a sensitivity of –167 dBmhas been achieved, making u-blox M8 the best per-forming GPS/BeiDou receiver on the market.

TEC

HN

OLO

GY

Bluetooth technology Robust connectivity in a globally deployed ecosystem

| Short range wireless

Bluetooth (IEEE 802.15.1) is a short range wireless technology that operates in the 2.4 GHz band. Blue-tooth is well suited for wireless integration of automat-ed devices in serial, fieldbus and ethernet networks. Bluetooth technology is specified for devices with high demands on small footprint, low power consumption and cost-efficiency.

Unprecedented eco-systemWith over two billion devices shipping annually, Bluetooth has become a de-facto standard for wireless connectivity between devices in industrial, consumer, automotive and medical applications. It now has an un-matched eco-system which is of particular importance when you want to connect several types of devices in different functionality areas as would be the case in IoT applications.

Classic Bluetooth vs Bluetooth low energy• Bluetooth low energy technology is ideal for ap-

plications requiring episodic or periodic transfer of small amounts of data where low cost and ultra low power consumption is the focus. It is particularly useful for Internet of Things (IoT) applications.

• In a Bluetooth application where streaming data is used, Classic Bluetooth technology is the preferred choice as it achieves substantially greater throughput than Bluetooth low energy.

Reliability & robustnessEngineers that developed Bluetooth, many of them now u-blox employees, came from an industrial auto-mation background. Therefore great focus was placed on engineering the most robust wireless technology available. Robust features include Adaptive Frequency Hopping (AFH) which detects potential channel inter-ference and prevents Bluetooth from interfering with other nearby wireless technologies such as Wi-Fi.

For Bluetooth low energy, an added feature is the “advertising” (periodic transmissions) function-ality which means that there is limited interfer-ence with the radio environment. u-blox has also solved potential interference during discovery and setup in Classic Bluetooth via its unique Low Emission Mode®. Highlights of u-blox Bluetooth:

• Proven in use under the harshest of conditions

• Tested and certified for industrial temperature range (–30°C to +85°C)

• Embedded stack (SPP, DUN, PAN, GATT)


• A range of modules available with different form factors and feature sets

• The products consume very little power and have a very low standby activity

• Range up to 500 meters; throughput (to keep all on one line) up to 1.3 Mbps

• Advanced multipoint capability with 7 slaves

• iPhone and Android connectivity solutions

• Low latency, fast response time, and periodical data update

• u-blox Low Emission Mode®

Caption: Examples of u-blox modules covering Classic Bluetooth and Bluetooth low energy technologies

• Bluetooth low energy end-devices (Bluetooth Smart) include actuators and sensors.

• Dual-mode Bluetooth end-devices (Bluetooth Smart Ready) include gateways and laptops.

• Classic Bluetooth end-devices include PLCs and patient monitoring devices.

Wi-Fi technologyIdeal for wireless connectivity with existing LAN infrastructure

Short range wireless |

Wi-Fi (IEEE 802.11) is a short range wireless technology that enables data exchange or internet connectivity over the 2.4 GHz and 5 GHz bands. Wi-Fi is the preferred short range wireless technology to connect to existing LAN / Wireless LAN infrastructure

or implement high throughput ad-hoc networks.

Wi-Fi is well suited for monitoring, configuration, data acquisition, as well as time critical control applications. The built-in roaming functionality is also useful in several applications with moving devices such as robots, patient monitoring etc.

Wi-Fi for demanding useConsumer products quickly embraced Wi-Fi technology. Now interest for industrial Wi-Fi applications is growing as designers realize the advantages of connecting to the Internet of Things (IoT).

Due to the long product life-cycle of devices used in in-dustrial and medical applications, however, the installed base typically doesn’t have a Wi-Fi interface, nor the necessary processor and resources to integrate a Wi-Fi software driver.

Embedding a Wi-Fi software driver can cause delays in time-to-market and budget overruns. Implementation must also satisfy several enterprise security require-ments for interoperability, as well as go through a long regulatory approval process.

In these types of situations, it is much easier and more cost-effective to integrate a complete, off-the-shelf u-blox Wi-Fi module which has all these features imple-mented.

The dual-band importanceIn addition to Wi-Fi, other wireless technologies, such as Bluetooth and IEEE 802.15.4/ZigBee/Wireless HART, also operate in the 2.4GHz band. As a result, this band easily becomes crowded. With Wi-Fi there are basically two solutions: extensive frequency planning together with special antenna solutions such as leakage cables, or to simply use the 5 GHz band for industrial applications. In fact, hospitals as well as processing and manufacturing industries often allocate channels in the 5 GHz band exclusively for industrial and medical devices.

The ODIN-W160 multiradio module is ready-to-embed in industrial, medical and demanding IoT applications.

u-blox Wi-Fi module features• Dual-band functionality 2.4 GHz (channels 1-13) and the full 5 GHz ISM band (U-NII Band 1, 2, 2e, 3 channels 36-165)• Tested and certified for industrial temperature range (–40°C to +85°C)

• Ultra low power consumption in compact design

• Range up to 500 meters

• Enterprise security modes: supports WEP, TKIP, AES, WPA, WPA2 security, EAP-TLS

TEC

HN

OLO

GY

| Automotive Dead Reckoning

Automotive Dead Reckoning

GNSS positioning works well when at least four satellites are within a GNSS receiver’s line-of-sight. However, in urban environments where the accuracy of GNSS navigation is crucial, the view to the sky is often obstructed, or high-rise buildings reflect GNSS signals causing severe multipath effects, degrading the quality of GNSS. In tunnels or underground parking garages, GNSS positioning may not work at all.

u-blox’ proprietary Automotive Dead Reckoning (ADR) solution solves this problem: based on the last known position, vehicle sensors feed information to the u-blox receiver indicating how far and in what direction the vehicle has travelled. Sensor data and GNSS position are both processed, achieving 100% coverage, highly ac-curate and continuous positioning even in GNSS hostile environments (e.g. urban canyons) or when the GNSS signal is absent (e.g. tunnels and parking garages).

u-blox’ ADR supports a variety of sensor combinations. The classical setup, called “Gyroscope plus Wheel Tick” (GWT), consists of a 1-axis gyroscope providing the heading information and wheel tick providing the speed information. The use of 3-axis gyro and 3D accelerometer noticeably improves accuracy and allows for altitude discrimination. u-blox’ M8 ADR chip and module support 3D Dead Reckoning.

Alternatively, sensor information from left and rightwheels (front or rear) or all wheels are used differen-tially to deduce heading, called “Differential Wheel Tick” (DWT). This results in slightly lower performance compared to GWT, but has the big advantage of savingthe cost of a gyroscope. Additionally, DWT provides even more accurate results during elevation changes during driving.

External sensor interface

The industry proven u-blox ADR solution is highly flexi-ble. The application processor can support a vast array of sensors, and must only convert the sensor data into UBX messages and pass them to the GNSS receiver via a standard serial interface (USB, SPI, UART, DDC).

Never lose track of where you are

This makes the u-blox ADR solution very portable between various vehicle platforms and reduces de-velopment effort and time-to-market. u-blox ADR is completely self-calibrating, and requires only pre-con-figuration to the specific vehicle platform.

u-blox’ ADR with software sensor interface is available as a single chip UBX-M8030-Kx-DR. The chips are qualified according to AEC-Q100 and manufactured according ISO/TS-16949 to meet demanding auto-motive quality requirements. These components are ideal for factory-installed navigation and eCall systems since they use sensor data (wheel tick and gyroscope data) taken directly from the CAN bus.

Onboard sensor interface

The NEO-M8L module is a dedicated ADR solution for installations with no access to the vehicle bus and no application processor for sensor data processing. The module’s on-board 3-axis accelerometer, 3-axis gyroscope sensors, and self-calibrating speed-pulse input (hardware or via message-bus) deliver a complete 3D solution for ADR applications. NEO-M8L is therefore the perfect after-market dead reckoning product.

Evaluation toolsEvaluation kits for u-blox‘ ADR technology can be ordered via a u-blox sales-representative.

For more details, visit our ADR webpage at:www.u-blox.com/en/dead-reckoning.html

LEA-6RTIMEPULSE

USB

UART

RESET_N

A D

DigitalTemp.

AntennaSupervisor

RF_IN

FWD/BCK

Odometer

SPI

Gyro/

Host

Gyro

A D

Accelero

Accelero

LEA-6RTIMEPULSE

USB

UART

RESET_N

A D

DigitalTemp.

AntennaSupervisor

RF_IN

FWD/BCK

Odometer

SPI

Gyro/

Host

Gyro

A D

Accelero

Accelero

http://www.u-blox.com/en/dead-reckoning.html

GNSS antenna modules |

GNSS antenna modulesGlobal positioning made easy

CAM-M8x 9.6 x 14.0 x 1.95 mm

PAM-7Q 22.0 x 22.0 x 8.0 mm

More and more end-products are integrating global positioning as a necessary and central feature. In addition to familiar navigation systems, “Global Navigation Satellite System” (GNSS) receivers are required in vehicle and asset tracking systems, personal locators, security systems, vending machines, health monitoring and recreational devices.

As many customers do not have the RF/antenna tuning expertise or the sourcing capability, a performance optimized “GNSS antenna module” which combines both satellite receiver chip and antenna on the same module can be a good solution. These modules provide fast time-to-market and an economically viable solution for “instant” global positioning. A GNSS antenna module is also significantly smaller in size than a GNSS module plus an external antenna. This makes a GNSS antenna module with integrated chip antenna a very attractive and hassle-free option for very thin designs.

For small and medium production runs, sourcing external antennas in low quantities may not be practical in terms of cost and lead times. Custom tuning would also be needed, especially with patch antennas. For these customers, pre-tuned GNSS antenna modules are an attractive choice. Currently u-blox offers two different kinds of GNSS Antenna Modules: CAM (Chip antenna Module) which can track GPS, GLONASS or BeiDou satellites, and PAM (Patch Antenna Module) which is dedicated to GPS positioning. Both types have been designed for optimal antenna performance independent of orientation and provide high sensitivity and jamming immunity as they include integrated SAW filters.

The CAM-M8 series, is a really interesting alternative when customers require both small size or multi-GNSS capability. It is based on a u-blox M8 chip and includes an integrated chip antenna plus SAW filter, LNA, TCXO or Crystal, RTC crystal and passives. The chip antenna element used in CAM-M8 series can handle

all L1 frequencies ranging from BeiDou (1560 MHz) and GPS (1575 MHz) up to GLONASS (1606 MHz). CAM-M8 modules are also extremely low in height making very thin customer designs possible. Chip antenna modules require care in design implementation as the PCB forms part of the overall antenna (half of the dipole). For this reason, u-blox provides all necessary design-in support including System Integration Manual plus Application Engineers with many years experience in designing with chip antennae modules.

CAM-M8 series has a feature whereby the internal chip antenna can be used as a backup antenna if the customer chooses to use an external antenna. This is useful in applications where there is a risk that the primary antenna may malfunction or suffer damage. CAM-M8 series is targeted for all applications requiring good multi-GNSS performance in a compact form factor.

The PAM-7Q is a highly popular form factor due to its installation flexibility. It can be mounted ‘as is’ in pre-existing designs or soldered with a pin-header to a customized PCB. The 18 x 18 mm patch antenna of PAM-7Q provides RHCP polarization not achievable with smaller patch antenna elements. The simple design and easy interfacing keeps installation costs to a minimum. PAM-7Q targets industrial and consumer applications that require a small, fast and cost efficient solution to GPS positioning.

Samples of CAM-M8Q, CAM-M8M and PAM-7Q, and evaluation kits EVK-M8CAM and EVK-7PAM can be ordered via u-blox’ online shop.

TEC

HN

OLO

GY

| Precise Point Positioning

Precise Point Positioning (PPP)Ultra-precise GNSS positioning

Many industrial and leisure applications require higher accuracy than traditional GNSS provides, for example mapping, agricultural uses, marine navigation, con-struction, open-sky warehouse management and loca-tion-based recreational applications such as geocaching and handheld golf rangefinders.

In some of these applications, Real Time Kinematic (RTK) or post-processing can be used to achieve accu-racy to millimeters at the cost of time or deployment of a local reference receiver. A much lower-cost solution is based on Precise Point Positioning (PPP), a method that performs precise position determination to within a meter using a single receiver.

u-blox’ PPP technology is made possible by stabilizing measurements of the distance between GNSS satellites and the receiver (pseudo-ranges) using carrier phase tracking. Additional accuracy is achieved from iono-spheric correctional data received from satellite-based augmentation systems, such as WAAS (USA), EGNOS (Europe), MSAS (Japan) and upcoming GAGAN (India).

3 5

5

3

1

1

East

North

Accuracy with PPP+SBAS(units in m)

North

3 5

5

3

East

Accuracy with GPS and SBAS(units in m)

Unlike other PPP solutions that require a dual-frequency receiver, u-blox’ PPP solution uses a single-frequency GPS receiver resulting in lower costs and power con-sumption.

u-blox has implemented PPP in its NEO-7P GNSS module, which also supports RTCM D-GPS in standard point-positioning mode for survey use. This stand-alone high-precision implementation requires no reference receiver deployment, is delivered as a compact (12.2 x 16.0 x 2.4 mm LCC) product, and integrates easily with u-blox wireless modules to support high-accuracy telematics applications.

The NEO-7P can be evaluated with the EVK-7P kit with Precise Point Positioning.

NEO-7PGNSS module with PPP

Precision Timing and Frequency Reference

In addition to positioning and navigation applications, GNSS signals are widely used as low-cost precision time or frequency references in remote or distributed wireless communication, industrial, financial, and power-distribu-tion equipment.

By capitalizing on atomic clocks onboard positioning satellites, GNSS signals can be used to synchronize equipment to within 15 ns, as well as provide UTC time to an accuracy of 90 ns. For wireless communication standards that utilize Time Division Multiplex (TDM) and for CDMA2000, LTE in applications such as femtocell basestations, a precision time reference is mandatory. For these and other systems, GNSS signals are utilized to provide an accurate reference frequency to within 1 part in 100 billion.

u-blox’ range of multi-GNSS precision timing chips and modules are able to fulfill this important reference function for a fraction of the cost, power consumption, maintenance, size and weight of other technologies with comparable performance. These stand-alone products provide accurate time pulses wherever GNSS signals are available, as well as precise disciplined fre-quency references with hold-over.

u-blox’ precision timing products benefit from the com-pany’s extensive applications experience and advanced technologies including:

• Fast satellite acquisition by u-blox’ intelligent multi-GNSS signal capture algorithms

• Location-independent clock synchronization, even when only one satellite is in view

• Weak-signal optimization, interference removal and multi-path mitigation enabling deployment in more difficult environments

• Flexible GNSS-synchronised time-pulse and frequency outputs aligned to GNSS time or UTC

• Low cost• Time integrity monitoring• Energy-optimised timing for battery-powered applications Frequency/Time modules and reference designs add:

• Disciplined internal or external master reference oscillators with automatic hold-over

• Time-pulse inputs and message-based APIs for inte-gration with host-based sources of synchronization

Accurate reference based on GNSS technologies

Precision Timing |

The histogram below shows the distribution of PPS time pulse time offsets for a u-blox LEA-6T receiver (light blue) and u-blox LEA-M8F receiver (dark blue).

Each PPS pulse edge from the LEA-M8F is precise-ly aligned with a disciplined reference frequency controlled by GPS. The result is excellent short- and long-term phase stability and the elimination of quanti-sation errors.The graph illustrates the very low standard deviation and maximal error of u-blox timing receivers.

u-blox products for Precision Timing:• LEA-M8F GNSS frequency reference module with

Precision Timing, automatic hold-over (see page 70)• UBX-M8030-KT-FT GNSS Precision Time and

Frequency Chip• LEA-M8T GNSS receiver module with Precision Tim-

ing, raw data and antenna supervision (see page 72)• NEO-M8T low power GNSSS receiver module with

Precision Timing compact form factor (see page 72)

Evaluation kit:• EVK-M8F Precision Timing evaluation kit for evalua-

tion of LEA-M8F and M8030-KT-FT (see page 101)• EVK-M8T Precision Timing evaluation kit for evalua-

tion of LEA-M8T and NEO-M8T (see page 101)

Samples of u-blox precision timing modules and evalua-tion kit can be ordered via u-blox’ Online Shop.

Reference design:• B81-FTS Reference Design for LEA-M8F, contact

u-blox for details.LEA-M8F/M8T NEO-M8T UBX-M8030-KT-FT

0−100 100−80 −60 −40 −20 20 40 60 800.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

Pulse offset (ns)

f

Pulse offset [ns]

TEC

HN

OLO

GY


Contacts

| Contacts

Europe, Middle East, Headquarters Africa u-blox AG, Switzerland Corporate Address

Phone: +41 44 722 74 44 u-blox AG Fax: +41 44 722 74 47 Zürcherstrasse 68 E-mail: [email protected] 8800 Thalwil Support: [email protected] Switzerland

Americas North and South America USA u-blox America, Inc., Reston, VA West Coast Office, Irvine, CA

Phone: +1 (703) 483 3180 Phone: +1 (949) 754 3020 E-mail: [email protected] E-mail: [email protected] Support: [email protected] Support: [email protected]

Asia-Pacific Singapore Australia u-blox Singapore Pte. Ltd. u-blox Singapore Pte. Ltd.

Phone: +65 6734 3811 Phone: +61 (0)2 8448 2016 E-mail: [email protected] E-mail: [email protected] Support: [email protected] Support: [email protected]

China China u-blox Beijing Rep. Office u-blox Shenzhen Rep. Office

Phone: +86 10 68 133 545 Phone: +86 755 8627 1083 E-mail: [email protected] E-mail: [email protected] Support: [email protected] Support: [email protected]

India Japan u-blox Liaison Office India, Bangalore u-blox Japan KK, Tokyo

Phone: +91 959 1302 450 Phone: +81 3 5775 3850 E-mail: [email protected] E-mail: [email protected] Support: [email protected] Support: [email protected]

Korea Taiwan u-blox Korea Branch Office, Seoul u-blox Taiwan Rep. Office, Taipei

Phone: +82 2 542 0861 Phone: +886 2 2657 1090 E-mail: [email protected] E-mail: [email protected] Support: [email protected] Support: [email protected]

Website www.u-blox.com

mailto:info%40u-blox.com?subject=

mailto:support%40u-blox.com?subject=

mailto:info_us%40u-blox.com?subject=

mailto:info_us%40u-blox.com?subject=

mailto:support_us%40u-blox.com?subject=

mailto:support_us%40u-blox.com?subject=

mailto:info_ap%40u-blox.com?subject=

mailto:info_auz%40u-blox.com?subject=PC%2015

mailto:support_ap%40u-blox.com?subject=

mailto:support_ap%40u-blox.com?subject=PC%2015

mailto:info_cn%40u-blox.com?subject=

mailto:info_cn%40u-blox.com?subject=

mailto:support_cn%40u-blox.com?subject=

mailto:support_cn%40u-blox.com?subject=

mailto:info_in%40u-blox.com?subject=

mailto:info_jp%40u-blox.com?subject=

mailto:support_in%40u-blox.com?subject=

mailto:support_jp%40u-blox.com?subject=

mailto:info_kr%40u-blox.com?subject=

mailto:info_tw%40u-blox.com?subject=

mailto:support_kr%40u-blox.com?subject=

mailto:support_tw%40u-blox.com?subject=


Worldwide presence

Worldwide presence |

Disclaimer u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or any part thereof without the express permission of u-blox is strictly prohibited.

Data shown in this document are estimates only and do not constitute a warranty or guarantee of product performance or services. No warranty or guarantee of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by u-blox at any time. For most recent documents, please visit: www.u-blox.com.

u-blox®, CellLocate® and AssistNow® are trademarks of u-blox Holding AG or u-blox AG registered and/or used in the EU, USA and other countries.ARM® is the registered trademark of ARM Limited in the EU and other countries.

Copyright © 2015 u-blox AG Printed on recycling paper

R&D centerEspoo, FIMalmö, SEReigate, UKMelbourn, UKLuton, UKCork, IELeuven, BE

R&D centerBerlin, GermanySgonico, ItalyAthens, GreeceLahore, Pakistan

Americas regional officeReston, Virginia, USA

West Coastarea officeIrvine, CA, USAR&D centerSan Diego, CA, USA

Corporate headquarters EMEA regional officeR&D centerThalwil, Switzerland

APAC regional officeSingapore

APAC area offices

Beijing, China

Seoul, Korea

Tokyo, Japan

Shanghai, China

Taipei, Taiwan

Shenzhen, China

Bangalore, India

Sydney, Australia

u-blox products catalog16

Documents

product catalog

product design

product portfolio

generation of products

internet of people

ublox quality system

distinct product grades

ublox m8