X Юбилейна международна научни конференция„Проектиране и строителство на сгради и съоръжения“, 20-22 септември 2018 г, ВарнаX Jubilee International Scientific Conference„Civil Engineering Design and Construction“ (Science and Practice), Sept. 20-22, 2018, Varna, Bulgaria

УКАЗАНИЯ ЗА ПОДГОТОВКА НА ДОКЛАДАЗА СБОРНИКА С ДОКЛАДИ НА DCB

(IF NECESSARY, THE EDITORS WILL TRANSLATEFROM THE ENGLISH VERSIONS)

Първи Автор, Име Фамилия (The editors will translate your name)

DCB PROCEEDINGS MANUSCRIPT SAMPLE (TEMPLATE)

First Author1, Second Author2

Abstract:This manuscript will be published in a CD, therefore it is necessary to follow the instructions given here in order to ensure a uniform layout. The text of the accepted for publication reports or posters should be written in English (International or United Kingdom) and should not exceed 10 (ten) pages, including title, equations, figures, tables and references. These guidelines can be downloaded from the website as an MSWord template or as a PDF-file (instructions only). Begin the abstract two lines below author names. The abstract summarizes key findings in the paper. It is one or two paragraphs of 250 words or less. For the keywords, select up to 8 key terms for a search on your manuscript's subject.

Keywords:Template, Formats, Instructions, Times New Roman, Left Justified

1. INTRODUCTIONThe manuscript should be in a one-column format and it should not have page numbers.

Begin the introduction two lines below the Keywords. References are noted in the text and cited at the end of the manuscript.

1.1. Paper Size and MarginsThe page settings are shown in Table 1. If the paper does not have the margins it will not

upload properly.

1.2. FontsUse Times New Roman to avoid font errors. Table 2 shows the font sizes and highlighting

in a manuscript. These font "styles" are contained with this sample manuscript and Section 4 below explains how to use them.

Table 1. Paper Size, margins and print area specifications.1 First Author, Academic Degree/Title, Department, Faculty, University/Organization/Company, Address,E-mail, Times New Roman (TNR) 10 pt. Left Alignment, (use References → Insert Footnote);2 Second Author, Academic Degree/Title, Department, Faculty, University, Address, Address, E-mail, TNR 10 pt;

X Jubilee International Scientific Conference„Civil Engineering Design and Construction“ (Science and Practice), Sept. 20-22, 2018, Varna, Bulgaria

Paper Size 210 × 297 mm (A4)Top, Right Margin 20 mm

Left, Bottom Margin 25 mmPrintable area – all text, figures and footnotes: 165×250 m

Header and Footer 10 mm (from edge)

Table 2. Manuscript font sizes and formatting. This Microsoft Word template includes these formats as automated "styles", which can be selected in the Format menu/Styles

Manuscript component / style DescriptionDCB Abstract and Keywords (text) Times New Roman (TNR) 12 pt, Italic, Left Alignment

DCB Authors TNR 12 pt, Bold, Centre

DCB Equation(1) TNR 12 pt, Centred, double tabbed; Spacing 6 pt before and after, optionally right-numbered

DCB Figure (caption) TNR 12 pt, Centre Alignment, justify, below figure; Spacing 6 pt before and after

DCB Footnote (text) TNR 10 pt, Left Alignment

DCB HEADINGTNR 12 pt, All Caps, Bold, Left Alignment; Spacing 6

pt before

DCB Main (body text) TNR 12 pt, justified alignment, 1 cm First line Indentation

[1] DCB Reference TNR 12 pt, left alignment, numbered in brackets

DCB Subheading TNR 12 pt, Bold, Left Alignment; Spacing 6 pt before

DCB TITLE TNR 16 pt; All Caps, Bold, Centre Alignment

DCB Table (caption) as DCB Figure, but above table

2. FORMATTING OF MANUSCRIPT COMPONENTS

2.1. TitleThe manuscript title is centered at the top of the page in 16 pt bold, all caps. Keep titles

brief and descriptive. Spell out acronyms unless they are widely known. Avoid starting with articles or prepositions, e.g., “The study of … ,” or, “On the ….”

2.2. Author affiliationsThe author list is in 12 pt regular, centered. Do not use titles and degrees such as Dr., Prof.,

Ph.D., etc. The author's affiliation and address for correspondence should be clearly noted in the Footnote.

2.3. Section headingsSection headings are 12 pt bold capitals, left justified. Sections numbers have whole

numbers, e.g., 1, 2, 3… Don't number the "Acknowledgements" and "References." Headings often used are: 1. Introduction, 2. Methodology, 3. Data, 4. Results, and 5. Conclusions.

2.4. Subsection headingSubsection headings are left-justified, 12 pt, bold. The first word, acronyms, and proper

nouns are capitalized.

2.5. Text and paragraphsText is 12 points and justified. It is recommended to use the "DCB Main" style. Each

sentence ends with a period and a single space before the next sentence. Do not add a blank line above and below section headings and between paragraphs. Avoid headings or one-line paragraphs at the top or bottom of a page by using page breaks or extra blank lines.

X Jubilee International Scientific Conference„Civil Engineering Design and Construction“ (Science and Practice), Sept. 20-22, 2018, Varna, Bulgaria

2.6. Figures and tablesBoth figures and tables are centred. For figures use and insert .jpg, .tiff, or .gif illustrations

instead of PowerPoint or graphic constructions. The captions of figures are below and the caption of table are above the table. Figure and table examples are on page 2 and below.

a) b)

Figure 1. Reinforced concrete beams (a) and test specimens (b). (photo by I. Ivanchev) [3]

3. EQUATIONSIt is recommended to use the MS Equation Editor, built-in MS Word, without changing its

default settings – font Times New Roman, size 12 pt. A math reference in a paragraph sentence such as is not numbered. When an equation is placed in one row it is centred by using right-aligned tab, optionally numbered. Leave one blank line before and after the equation/expression/formula. Using the DCB Equation style is the easiest method for making equation. For example

. (1)

where variables or symbols should be defined, unless obvious; here Kinc is the incremental stiffness matrix of shell; Fint is the internal force vector of shell, Fext is the external load of shell and ΔFext is the increment of the external load of shell.

4. USING THIS TEMPLATE AND ITS AUTOMATIC FORMATTING

4.1. General informationThis document template and more information is available on site NTSSB.bg:

http://ntssb.bg/deinost/konferentzii/k-2018-godina/item/379-instructions-and-requirements or by emailing: ntssb_sf@abv.bg.

This Microsoft Word template includes automated "styles", which shown in Table 2. To see the formats available with this manuscript, go to the Format menu and choose "Styles" (Fig. 2). To view which style is being used in any part of this document, place your cursor on the line and look in the Styles and Formatting display.

X Jubilee International Scientific Conference„Civil Engineering Design and Construction“ (Science and Practice), Sept. 20-22, 2018, Varna, Bulgaria

Figure 2. Display and use of automated "styles" in this file.

4.2. Using DCB stylesTo use this template in Microsoft Word, open this file and save it to a new file name. Type

over the existing text with your manuscript. Alternately, you can delete all text, and select the DCB style for each paragraph from the Styles and Formatting menu.

ACKNOWLEDGEMENTThe acknowledgement, if any, is placed at the end of the manuscript text, without

numbering. This is the correct place for sponsor and financial support acknowledgments.

REFERENCES[1] Guo Z., Principles of Reinforced Concrete, Butterworth-Heinemann, 2014, 606 p. (book).[2] Zhang S., A. Keulen, K. Arbi, G.Ye, Waste glass as partial mineral precursor in alkali-

activated slag/fly ash system, Cem. Conc. Res., 102, 2017, 29-40. (journal paper)[3] Ivanchev I., Experimental determination of the crack widths in RC elements, subjected to

bending. In: Proc. ХVII Int. Sci Conf. VSU'2017, June 8-9, 2017, Sofia, (Eds. V. Stoyanov and D. Partov), VSU „L. Karavelov“, Sofia, Vol. 1, 2017, 207-212. (paper in proceedings)

[4] Mara V., Fibre reinforced polymer bridge decks: Sustainability and a novel panel-level connection, PhD Thesis, Chalmers University of Technology, Gothenburg, Sweden, 2014 [Retrieved from http://publications.lib.chalmers.se/records/fulltext/193310/193310.pdf]

[5] Tchobanov V., K. Ishtev, P. Philipoff. Investigation of the Structural Dynamic Behaviour in Complex Domain, Stroitelstvo, Sofia, 6-7, 1994, 13-21. (in Bulgarian)

[6] Russian National Standard 13015-2003. Ferro-concrete and concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage. (in Russian)

[7] „Assainissement Durable,“. Available: http://www.produitsbeton.com/DM/ged/PUBLIC/FDES/. [last visited Aug. 31, 2018].