Full-portal gantry crane for bulk material handling, span of crane = 45 m, lifting capacity = 16 t

Two-gantry girder overhead travelling crane for annealing shop, span of crane = 28,3 m, lifting

capacity = 6 t

Crab of grab crane – m = 3,2 t

Contact: Tel.: +420 558 532 316 Fax: +420 558 321 328 info@sas-trinec.cz

Strojírny a stavby Třinec, a.s. Průmyslová 1038, Staré Město 739 61 Třinec Czech Republic

www.sas-trinec.cz

MANUFACTURING, MODERNIZATION OF CRANES AND SUSPENSION DEVICES INCL. THE DESIGN

We offer:

Manufacturing of cranes incl. the turnkey projects – complete supplies

Proposal of complex solution of investment planning

Processing of complete offer incl. the crane design

Manufacturing of cranes acc. to your requirements

Order management by professional team incl. the training

Customer service – assembly, customer service, spare part supplies

We produce:

Overhead travelling cranes incl. the lift and components stabilization

Full-portal gantry cranes

„Suspension“ cranes

Magnet cranes and grap cranes

Design: :

Crane design concept (Autodesk Inventor – space fully dimensional simulator programme)

Engineering strenght calculation by Finite Element Method

(ANSYS Workbench programme)

Processing of complete offer incl. the crane design

Single-girder overhead crane (2014)

Lifting capacity: 5 t Span of crane: 15,3 m

Workshop crane for handling with temporary deposition material using a simple hook

Control via radio remote control Designed for indoor environment of hall

Two-gantry girder overhead travelling crane for wire rod mill (2014) Lifting capacity: 6 t Span of crane: 28,3 m

Handling of wire coils with C-hook Control from the comfortably equipped cabin The entire crane is controlled by a PLC system and

connected to the company WIFI network Equipped with a rotating crab to 270 ° on both sides

Designed into hot environment

Full-portal gantry crane for (2014) Lifting capacity: 23 t Span of crane: 44 + 4,7 m

Handling with billets using two pieces of the electromagnets suspended at both ends of the support beam

Control from air-conditioned/heated cabin Equipped with footbridge for easy crane system operation Designed for outdoor enviroment

Lifting capacity: 20 t Span of crane: 20 m

Handling of liquid metal and shaking-out from mould by 20 tons hook

Control from the comfortably equipped cabin Equipped with footbridge for easy operation of the crane

mechanism

Designed into hot and dusty environment

Two-gantry girder overhead travelling crane for foundry (2014)

.

MANUFACTURING AND MODERNIZATION OF CRANES INCL. THE DESIGN

Two-gantry girder overhead travelling crane for plates handling (2011) Lifting capacity: 12,5 t Span of crane: 15 m

Metallurgical material handling by magnet or by suspension components

Operating from the cabin Equipped with footbridge for easy crane system operation Engineered for warehousing activities with metallurgical

material

Two-gantry girder overhead travelling crane for ingots store (2011) Lifting capacity: 16 t Span of crane: 28,2 m

Ingots handling is engineered by extending telescop which ensures stability of cross girder with magnets

Operating from the cabin Equipped with footbridge for easy crane system operation Rotating crane crab enables 270 ° turning of cross girder

during the handling

Lifting capacity: 25 t Span of crane: 32+4,7 m

Handling billets using two pieces of electromagnets suspended at both ends of the support beam

Control from air-conditioned/heated cabin Equipped with footbridge for easy crane system operation Designed for outdoor use

Full-portal gantry crane for handling billets (2008)

Lifting capacity: 35 t Span of crane: 25 m

Handling with blooms Control from air-conditioned/heated cabin Equipped with footbridge for easy operation of the crane

mechanism Designed for indoor environment of hall

Clamp crane for handling blooms (2003)

Two-gantry girder overhead travelling crane for Sintering Plan (2013) Lifting capacity: 6 t Span of crane: 13 m

Crane is used for replacement and repairs of defective sintering trucks, including repair works to all local facilities

Control via radio remote control Designed for diagonal tension to 15 ° and to very hot and

dusty environment

Lifting capacity: 10 t Span of crane: 8,1 m

Equipped with magnet for ferrous metal sows handling Operated from air-conditioned and sound-proof cabin Equipped with footbridge for easy crane system operation Engineered for heavy operating in dusty workplace

Two-gantry girder overhead travelling crane for Slag Mill Plant (2012)

Lifting capacity: 20 t/5 t Span of crane: 20 m

Handling with workpieces and parts into machine tools using two simple hooks

Control via radio remote control Equipped with two hoists with capacity of 20 and 5 tons

Designed for indoor environment of hall

Single-girder overhead crane for material handling (2013) Lifting capacity: 5 t Span of crane: 14 m

Workshop crane for material handling and setting up workpiece in machining, consequently their shipping and loading into various means of transport with a simple hook

Control via radio remote control Designed for indoor environment of hall

Single-girder overhead crane – handling workpieces (2013)

www.sas-trinec.cz

www.sas-trinec.cz