tv stand stand included in the package i rear view n.0/d parts identification (description) 01 base...
TRANSCRIPT
TV Stand
INCLUDED IN THE PACKAGE
I REAR VIEW
n. 0 /D Parts Identification (Description)
01 Base
02 Top Panel
03 Left Side Panel
04 Left Partition
05 Shelf
06 Right Partition
07 Right Side Panel
08 Door
09 Left and Right Back Panel
10 Lower Middle Back Panel
11 Upper Middle Back Panel
12 Wood Feet
2
11 FRONT VIEW
Quantity
1
1
1
1
2
1
1
1
2
1
1
4
TOOLS NEEDED
INCLUDED IN THE PACKAGE
I04x
le:> 13x
le13x
le2x
0
II04x
II07x
�
II011x
8 IIOsx
IIG24x
V,l 3
II07x
IIOsox
OJ ,
IIG4x
3
!STEP l
lsTEP2
lsTEP3
lsTEP4
4
B
A
DETAIL 1
Preparing the door:
• Fix the hinges (J) in the Door (08)
with bolts (K).
• Fix the feet (12) under the Base (01)
with bolts (A).
• Apply the protective felt covers (L)
on the bottom of the feet (12).
• Apply the plastic covers (B) on top
of the bolts (A).
• Connect Shelves (05) into
Partitions (04) and (06) with dowels (C) and bolts (D).
• Connect Side Panels (03) and (07)
into the Base (01) with dowels (C) and bolts (D).
• Connect Partition Parts (04) and
(06) into the Base (01) with
dowels (C) and bolts (D).
I STEPS
lsTEP 6
lsTEP7
1)-ti!-O G F
• Connect the Top Panel (02J onto
Side Panels and Partitions (03J, (04J,
(06J and (07J using dowels (CJ
and the Minifix hardware (E + FJ.
• Apply adhesive covers (GJ on
the minifix hardware (FJ.
• Fix hinge connector (JJ on the Right Side Panel (07J
with bolts (KJ.
• Connect Back Panels (09J, (10J
and (11,J with nails (IJ.
• Use metallic plates (HJ and
nails (IJ at the joining surfaces.
Installing the door (08):
• Insert the hinge from the door (OBJ
onto the connector on the Side
Panel (07J.
The connector pieces includes 2 bolts.
Use the adjustment and fixer bolts
on the insert to tighten, adjust and
align the door.
5