turingan jane e
TRANSCRIPT
-
7/28/2019 Turingan Jane e
1/6
TURINGAN JANE E. BSED TLE
PROJECT PLAN
I. Name of Project: DUSTPAN
II. Purpose of Project: Use to gather dirt or garbage.
III. Objectives: To develop my skills in measuring, cutting, bending, marking and drilling in
welding. To value the importance of welding. To demonstrate on how to assemble a dustpan.
IV. Working plan/drawing:
V. Bills of Materials:Quantity1 pc.1 pc.1 pc.1 pc.8 pcs.2 pcs.
DescriptionG.I. sheet 3/16 x12x12 9mm. Plain rod 3/8 x 37 Flat bar 3/16 x 2 x 9 E6013 ElectrodeRivet 3/16 x 8mm. Plain rod
Price35.3111.8815.934.226.562.6176.51 Total
-
7/28/2019 Turingan Jane e
2/6
VI. Procedure:
1. Prepare all the materials, tools and equipment in making a dustpan.
2. Measure the G.I sheet according to specification than cut.3. Bend the G.I sheet according to plan to form a dustpan.4. Mark and measure, than drill the flat bar by making 3/16 bit together with the G.I sheet
were to rivet.5. Cut 1 meter rod and bend it to form and serve as handle.6. Get the center point of the flat bar then weld the handle on it.7. Attach the brace to the welded dustpan.8. File all the rough portion and tampered part.9. Paint and dry the dustpan to finish the project.
VII. Tools and Equipment:
Tools
Ball peen hammer HacksawFileScriber Snip
Paint brush
Equipment
Welding machineBender viseG.I. sheet bender G.I. sheet cutter Electric drill
Vise grip
-
7/28/2019 Turingan Jane e
3/6
Bulaqui Analyn B. BSED TLE
PROJECT PLAN
I. Name of Project: DUSTPAN
II. Purpose of Project: Used to hold and swept dust from the floor. Used to gather garbage.
III. Objectives: To develop my knowledge and skills in welding. To observed the safety precaution in welding.
To perform at least one dustpan with the proper used of different tools,materials and equipment.
IV. Working plan/drawing:
V. Bills of Materials:Quantity1 pc.
1 pc.1 pc.1 pc.8 pcs.2 pcs.
DescriptionG.I. sheet 3/16 x12x12 9mm. Plain rod 3/8 x 37
Flat bar 3/16 x 2 x 9 E6013 ElectrodeRivet 3/16 x 8mm. Plain rod
Price35.31
11.8815.934.226.562.6176.51 Total
-
7/28/2019 Turingan Jane e
4/6
VI. Procedure:
1. Prepare all the materials, tools and equipment in making a dustpan.2. Measure the G.I sheet according to specification than cut.
3. Bend the G.I sheet according to plan to form a dustpan.4. Mark and measure, than drill the flat bar by making 3/16 bit together with the G.I sheet
were to rivet.5. Cut 1 meter rod and bend it to form and serve as handle.6. Get the center point of the flat bar then weld the handle on it.7. Attach the brace to the welded dustpan.8. File all the rough portion and tampered part.9. Paint and dry the dustpan to finish the project.
VII. Tools and Equipment:
Tools
Ball peen hammer HacksawFileScriber SnipPaint brush
Equipment
Welding machineBender viseG.I. sheet bender G.I. sheet cutter Electric drillVise grip
-
7/28/2019 Turingan Jane e
5/6
Tulauan Hazel L. BSED TLE
PROJECT PLAN
I. Name of Project: DUSTPANII. Purpose of Project:
Used to hold dust, dirt and waste that swept from the floor.III. Objectives:
To identify the needed materials, tools, and equipment in making dustpan. To value the significance of proper handling of tools and equipments used in
welding a dustpan. To perform the correct step and procedure in assembling a dustpan.
IV. Working plan/drawing:
V. Bills of Materials:Quantity1 pc.1 pc.
1 pc.1 pc.8 pcs.2 pcs.
DescriptionG.I. sheet 3/16 x12x12 9mm. Plain rod 3/8 x 37
Flat bar 3/16 x 2 x 9 E6013 ElectrodeRivet 3/16 x 8mm. Plain rod
Price35.3111.88
15.934.226.562.6176.51 Total
-
7/28/2019 Turingan Jane e
6/6
VI. Procedure:
10. Prepare all the materials, tools and equipment in making a dustpan.11. Measure the G.I sheet according to specification than cut.12. Bend the G.I sheet according to plan to form a dustpan.13. Mark and measure, than drill the flat bar by making 3/16 bit together with the G.I sheet
were to rivet.14. Cut 1 meter rod and bend it to form and serve as handle.15. Get the center point of the flat bar then weld the handle on it.16. Attach the brace to the welded dustpan.17. File all the rough portion and tampered part.18. Paint and dry the dustpan to finish the project.
VII. Tools and Equipment:
ToolsBall peen hammer HacksawFileScriber SnipPaint brush
EquipmentWelding machineBender viseG.I. sheet bender G.I. sheet cutter Electric drillVise grip