Rod Step seal - GSJ

3. Method of marking order number

If you need FKM O ring,please make a special instrument.Eg:Standard rod step seal Ø100 , should be mark GSJ1000.

Groove WidthInstallation Demension

Shaft diameter Groove OD Fillet Radial Clearance O Ring section

Standard Spec Light duty Heavy duty

Seal ring: filled PTFE2.Standard Material

O Ring:NBR or FKM

Preesure Range Speed MediumGeneral hydraulic oil,antiflaming oil,

water and others

For reciprocated hydraulic system. Possessing excellent performance in high, medium and low pressureand in high load, high frequency conditions. Especially suitable for long stroke.

In line with standards of GB/T 15242.1-94 and GB/T 15242.3-94. Design and apply please referring toParker’s OD, Merkel’s OMS-MR, Trelleborg’s RS1 and AS’s XB series standards.

1. Application Range & Charateritics

Available Dia. RangeWorking Condition

Temp.Range

Edition July 2009

Rod Step seal - GSJBottom Dia.Shaft Dia. Width Order Number O Ring

Size Order Number O RingSize

Width

Edition July 2009

Bottom Dia.Shaft Dia.

Rod Step seal GSJWidth Order Number O Ring

Size

Width Order Number O RingSize

Bottom Dia.Shaft Dia. Bottom Dia.Shaft Dia.

Edition July 2009