tunnel_device alias ,
DESCRIPTION
Tunnel_device Alias ,TRANSCRIPT
Tunnel formation steps between production and DR cisco router
Tunnel formation steps between production and DR cisco router
fc1/7
Prod router detail
mgmt ip 172.30.43.121
wan ip 172.30.11.59
wan port Gig1/1
fcip profile 50
Fcip interface70
DR router detail
mgmt ip 172.30.43.122
wan ip 172.25.11.122
wan port Gig1/1
fcip profile 60
Fcip interaface60
Hence tunnel is already formed , here I will take only snap shot for the running config of the router and also
Command mentioned below for tunnel formation
Work on prod router
Enable the FCIP feature
Feature fcip
Sh feature
Create the profile and give the ip address on this profile
Conf t
Fcip profile 50
Ip address 172.30.11.59
Sh fcip profile
Create the fcip interface and mentation which profile this interface would use and also mentioned the peer ip address
Conf t
Interface fcip
Use profile 50
Peer-info ipaddr 172.25.11.122No shut down
sh interface fcip50
No same action we have to perform on the DR router , mean in same manner we have to enable the fcip feature we have to create the profile and assign the Gig ip address which to be use a WAN ip on this profile , create a FCIP profile , mentioned which profile it has to use , mention the peer ip address information ( mean prod WAN ip )Work on DR router
Enable the FCIP feature
Feature fcip
Sh feature
Create the profile and give the ip address on this profile
Conf t
Fcip profile 60
Ip address 172.25.11.122Sh fcip profile
Create the fcip interface and mentation which profile this interface would use and also mentioned the peer ip address
Conf t
Interface fcip 60 Use profile 60Peer-info ipaddr 172.25.11.59No shut down
sh interface fcip60
Now tunnel formation steps is done , verify the tunnel formation by pinging and traceroute command
So it verified tunnel if formed and fcip is configured , now next task is zoning part
=============================================================================
VSAN, Device alias, zone, zoneset creation for CISCO routers
VSAN ( Imp points )
1. By default each fc port comes in to the vsam 1 ,
2. you can not remove a port from vsan .. u can only migrate it on its default vsan 13. when you delete a vsan having member(s) , it member automatically migrate into the vsan 4094(isolated_vsan)Now on production router create a vsan 70 and add the fc port in the it Conf t
vsan database
vsan 70vsan 70 interface fc1/7
sh vsan
sh vsan membership
sh flogi database
Same steps on DR router also
Conf t
vsan database
vsan 70vsan 70 interface fc1/7
sh vsan
sh vsan membership
sh flogi database
Now on production Create Device alias for the storage port, commit and check the status
Important to note you can create the device alias of DR stg io port on production router itself no need to login on DR router and follow the same steps for creating device alias conf t
device-alias database
device-alias name DC1_Venus_75ABV71_I0600 pwwn 50:05:07:63:03:30:13:33
device-alias name DR_LIBRA_75AZT11_I0700 pwwn 50:05:07:63:04:38:11:53
sh device-alias status
device-alias commit
sh device-alias status
sh flogi database
Check on DR router whether my device alias is created or not
sh flogi database
sh device-alias database