tunnel lighting 4
DESCRIPTION
tunnel lightingTRANSCRIPT
-
The NTL1 tunnel lighting luminaire, with front access, makes it possible toincorporate a wide variety of lamps.
A continuous hinge / closure system allows front access formaintenance work.
NTL1
Tunnel lightingFront access
APPLICATIONS
Symmetrical and asymmetrical lighting of road, motorway
and subway tunnels.
ADVANTAGES
Incorporation of any type of source that can be used in
tunnels (high- and low-pressure sodium, fluorescent,
compact fluorescent), for all power ratings.
Easy installation
Compact
DESCRIPTION
Tight luminaire with front access, consisting of the following
components:
body and continuous hinge / closing system: extruded
aluminium protected by anodic oxidation (class 15);
two side covers: die-cast aluminium protected by hot
polyester powdering;
protector made of safety glass (clear or frosted) or of
polycarbonate;
pull-out reflector made of anodised aluminium;
pull-out control gear plate;
PROPERTIES
Tightness : IP 65
Impact resistance (glass) : IK O8
Aerodynamic resistance (CxS) :
Example: length 690 mm Front : 0.097 m2
Side : 0.038 m2
Electrical insulation class : I or II
According to standard EN 60598
The NTL1 luminaire illuminates all types of tunnels: road,motorway or subway.
-
NTL1
The materials of the mounting parts (AG3 aluminium, 316
stainless steel or Modar) and of the screws and bolts are
INSTALLATION
adapted to the conditions of use and to the nature of the
materials in direct contact with them.
I. Direct mounting II. Mounting with profile
4 x M8 screws
III. Angle-adjustable mounting IV. Tilting mounting
Compression gland position on the body or onthe side cover.
ELECTRICAL INSTALLATION MAINTENANCE
After undoing the continuous closure system, without tools,
the protector glass tilts around a continuous hinge system.
The glass is easy to remove and replace. The control gear is
fixed to a pull-out plate.
130 mm130
mm
-
DIMENSIONS
250 mm
230 mm
110 mm
117
mm
110
mm
lengte : zie lampentabel
OPTIONS
-- Polycarbonate protector (6mm) with vandal-proof function.
Only possible with compact fluorescent lamp.
- Power variation.
- Frosted glass.
- Looped feed.
- Fuses.
SPECIAL APPLICATION
The NTL1 can also be used to illuminate road signs. In this
case, the luminaire is attached to a horizontally-positioned
tube.
The mounting part for a 60 mm diameter tube allows the NTL1 to be adjusted onsite. Two mounting parts are needed for luminaires over 880 mm in length.
90
45
150
H
A
Length A Height of the sign
550 mm < 1,4 m
850 mm 1,4 - 2,3 m
1150 mm 2,3 - 3,2 m
1450 mm 3,2 - 4,1 m
1750 mm 4,1 - 5 m
60
15
-
NTL1
SymmetricalReflector 72
36 W 16 mm fluorescent
450 375 300 225 150 75 515 430 340 255 170 85420 345 270 195 120 45
AsymmetricalReflector72
36 W 16 mm fluorescent
Low-angledReflector 1559
36 W 16 mm fluorescent
LAMPS
PHOTOMETRY
575mm9kg
72 Sym /72 Asym
50 - 70 -100 - 150 W
575mm9kg
690mm10kg
880mm13kg
1270mm16kg
1570mm19kg
72 Sym /72 Asym
35 WE 26 W
55 WE 36 W
90 WE 66 W
135 WE 91 W
180 WE 131 W
575mm9kg
575mm9kg
690mm10kg
72 Sym /72 Asym /1559(*)
24W
36W
55W
575mm9kg
575mm9kg
690mm10kg
690mm10kg
1270mm14kg
1570mm16kg
690mm10kg
1270mm14kg
1570mm16kg
(*) XXXonly one lampXXX
72 Sym /72 Asym /1559(*)
18W
36W
58W
High-pressure sodium Fluorescent
Compact fluorescent
Low-pressure sodium
Reflector type