TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

187

Introduction

GS-Hydro maintains a large stock of carbon and stainless steel pipes & tubes to be utilised in hydraulic and other piping systems:

Original GS-Hydro high pressure piping can be recognised from the marking GS Piping.

In order to ensure quality and traceability GS-Hydro can deliver the pipes and tubes with either EN-10204.3.1.B or EN-10204.3.1.C certicates (in accordance with EU standard EN 10204 (DIN 50049)). The required certicate, if any, has to be specied by the purchaser.

GS-Hydro recommends the use of cold drawn pipes & tubes due to quality (precision in dimension and shape) and cleanliness reasons (no scale) As a comparison hot rolled tubes will always have some scale both inside and out due to the manufacturing process; by cold forming there will not be any scale inside the tube after the manufacturing.All precision steel pipes are supplied with trace numbers.

Stainless steel pipes & tubesGS-Hydro maintains a large stock of stainless steel tubes in AISI316L seamless quality from 6 mm to 80 mm O.D. (=Outer Diameter). Larger O.D. tubes are supplied upon special order. Seamless cold drawn stainless steel tube

to ASTM A269 / A213 (A.W.) O.D. x W.T. Grade TP 316L can be supplied with EN - 10204.3.1.B certicate upon request. The tubes are supplied at a standard length of 6 m. All tubes are supplied plugged with plastic caps.

Carbon steel pipes & tubesGS-Hydro stocks cold drawn seamless high tensile hydraulic tube according to DIN 2391C(EN 10305-4) O.D. x W.T. DIN 1630ST52.4(E 355 N). High tensile strength tube means higher permissible working pressures and reduced wall thickness, leading to reduced overall weight. GS-Hydro also stocks DIN 2391C(EN 10305-4) O.D. x W.T. DIN 1630ST37.4(E 235 N).

Tubes are supplied in an annealed condition and are suitable for cold bending and aring. External phosphating gives corrosion protection and a good base for a paint nish.

Tubes up to an O.D. of 75 mm can be supplied electric zinc plated + yellow passivated or blue passivated (Cr VI-free alternative) for additional corrosion protection. As all original GS-Hydto tubes are marked with trace numbers the tubes can be supplied with certicates in accordance to EN 10204.3.1.B, if requested. Certication according to EN 10204.3.1.C is also available upon request. The tubes are supplied at a standard length of 6 m up to 97 mm. Larger O.D. tubes are supplied in random lengths from 4 to 7 m. All tubes are supplied plugged with plastic caps.

Carbon Steel

Material Specication DIN 1630

Manufacturing Tolerances DIN 2391-1 EN 10305-4

Technical Terms of Delivery DIN 2391-2/C EN 10305-4

Stainless Steel (mm) Stainless Steel (sch)Material Specication ASTM A269/A213 (A.W.) AST A312Manufacturing Tolerances ASTM A269 ASTM A530

The required wall thickness and/or maximum allovable working pressure is calculated either according to DIN, ANSI or Det Norske Veritas as presented on pages 188 190.

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES

HOSES &HOSE COUPLINGS

ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES

SAE J514 JICFLARE FITTINGS

188

Introduction

Material Yield (Sft) Tensile (Sb) Allowable (Sl)Stainless steelASTM A269/A213 (A.W.) Grade TP316LvstaticvdynamicASTM A312/A530 Grade TP316Lvstaticvdynamic

276

234

530

515

184 (yield)212 (yield)156 (yield)206 (yield)

Carbon steelDIN 2391C(EN 10305-4) ST52.4(E 355N) vstaticvdynamicDIN 2391C(EN 10305-4) ST37.4(E 235N) vstaticvdynamic

355

235

533

390

222 (yield)200 (yield)157 (yield)151 (yield)

The max. allowable static stress (Sl) is determined as following:

DIN 2413/I and DIN 2413/IIIAll working pressures are based on DIN 2413/I and DIN 2413/III for straight tubes and pipes.

The yield and tensile stress values utilised to determine the maximum allowable working pressure/required wall thickness are based on GS-Hydros expertise. When tubes and pipes are delivered the actual yield and tensile stress values are always veried from the material certicates. The following yield and tensile stress values are utilised to determine the allowable stress:

The required wall thickness is calculated as follows:

to = p x O.D.

2 x Sl x e

[1]tn = to1 a

100

[2]

to = O.D.

- 12 x Sf2

p

[3]

t = to + c [4]

tn = to

1 a100

[5]

DIN 2413/III

DIN 2413/I

Sl = Sft 1.5

when A r 25%

Sl = Sft 1.6

when A = 20%

c = corrosion tolerance for hydraulic piping = 0.3p = pressure [bar]O.D. = outside diameter of pipe [mm]Sb = tensile strength at 20C [N/mm2]e = stregth ratio (seamless pipe) = 1R = bending radius [mm]a = manufacturing tolerance [%] = 10%tn = nominal wall thickness (= W.T. in tables) to = required wall without tolerancest = required wall thickness with manufacturing

toleranceSf2 = max. permissible stress under fatigue

load considering safety factor. The value is based on experience of GS-Hydro.

Sft = yield stress or 0.2 proof stress of the material at design temperature

A = Elongination

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

189

Material Yield (Sft) Tensile (Sb) Allowable (Sl)Stainless steelASTM A269/A213 (A.W.) Grade TP316LASTM A312/A530 Grade TP316L

276234

530515

172 (yield)146 (yield)

Carbon steelDIN 2391C(EN 10305-4) ST52.4(E 355N)DIN 2391C(EN 10305-4) ST37.4(E 235N)

355235

533390


The allowable stress (Sl) is based on the lower value of the following:

c = corrosion tolerance for hydraulic piping = 0.3p = pressure [bar]O.D. = outside diameter of pipe [mm]e = stregth ratio (seamless pipe) = 1R = bending radius [mm]a = manufacturing tolerance [%] = 10%tn = nominal wall thickness (= W.T. in tables)to = required wall without tolerancest = required wall thickness with manufacturing

toleranceb = bending allowance

Det Norske VeritasAll working pressures are based on Det Norske Veritas rules for classication of ships, newbuilding part 4, Chapter 1, Section 6 and mobile offshore units drilling plant (drill) Part 6, chapter 5, Section 6 for bent tubes and pipes.In the tables yield and tensile stress values which are based on GS-Hydros expertise are utilised. When delivered the actual yield and tensile stress values are always veried from the material certicates. The following yield and tensile stress values are utilised to determine the allowable stress:

Sl = Sb2.7

orSft 1.8

carbon steel

Sl = Sb2.7

orSft 1.6

stainless steel


t = to + c + b

to = p x O.D.

20 x Sl x e + p

tn = t

1 a100

b = 12.5

O.D. x toRx = 0.1333 (R = 3 x O.D.)

[6]

[7]

[8]

Sb = tensile strength at 20C [N/mm2]Sft = yield stress or 0.2 proof stress of the material

at design temperature

The burst pressure presented is for a straight pipe and based on the tensile stress value. When determining the burst pressure a manufacturing tolerance of 10% is included.

Introduction

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


190


Material Yield (Sft) Tensile (Sb) Allowable (Sl)Stainless steelASTM A269/A213 (A.W.) Grade TP316LASTM A312/A530 Grade TP316L

276234

530515


Carbon steelDIN 2391C(EN 10305-4) ST52.4(E 355N)DIN 2391C(EN 10305-4) ST37.4(E 235N)

355235

533390


The allowable stress (Sl) is based on the lower value of the following:

ANSIIn the attached tables all working pressures are based on ANSI B31.3 304.1/3B.

In the tables yield and tensile stress values which are based on GS-Hydros expertise are utilised. When delivered the actual yield and tensile stress values are always veried from the material certicates. The following yield and tensile stress values are utilised to determine the allowable stress:

The burst pressure presented is for a straight pipe and based on the tensile stress value. When determining the burst pressure a manufacturing tolerance of 12.5% is included.

Sl = Sb3

or2 x Sft

3

to = p x O.D.2 x Sl x e

[10]

tn = to

1 a100

[11]

p = pressure [bar]O.D. = outside diameter of pipe [mm]Sb = tensile strength at 20C [N/mm2]Sft = yield stress or 0.2 proof stress of the material

at design temperaturee = stregth ratio (seamless pipe) = 1a = manufacturing tolerance [%] = 10%tn = nominal wall thickness (= W.T. in tables)to = required wall without tolerances

Order Example

Final Supply Condition

60X3ST52.4NBK/YC 180 m .....

Needed Total Length(m)

Additional Text(f.ex. blue passivation

request)Steel GradeTube O.D. x W.T.

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

191

Seamless Colddrawn Stainless Steel Tube - AISI 316 L

Part No O.D. x W.T. ID CodeW. P. bar B.P. bar

kg/m1 2 3

6X1AISI316L 6 x 1.0 33010610 333 552 1590 0.078X1AISI316L 8 x 1.0 33010810 244 414 1193 0.178X1.5AISI316L 8 x 1.5 33010815 451 621 1789 0.2410X1AISI316L 10 x 1.0 33011010 192 331 954 0.2210X1.5AISI316L 10 x 1.5 33011015 351 497 1431 0.3110X2AISI316L 10 x 2.0 33011020 525 662 1908 0.4012X1AISI316L 12 x 1.0 33011210 159 276 795 0.2712X1.5AISI316L 12 x 1.5 33011215 288 414 1193 0.3912X2AISI316L 12 x 2.0 33011220 426 552 1590 0.4912X2.5AISI316L 12 x 2.5 33011225 576 690 1988 0.5915X1.5AISI316L 15 x 1.5 33011515 226 331 954 0.5016X1.5AISI316L 16 x 1.5 33011615 211 311 894 0.5416X2AISI316L 16 x 2.0 33011620 310 414 1193 0.6916X2.5AISI316L 16 x 2.5 33011625 415 518 1491 0.8316X3AISI316L 16 x 3.0 33011630 525 621 1789 0.9618X1.5AISI316L 18 x 1.5 33011815 187 276 795 0.6118X2AISI316L 18 x 2.0 33011820 273 368 1060 0.7920X2AISI316L 20 x 2.0 33012020 244 331 954 0.8920X2.5AISI316L 20 x 2.5 33012025 324 414 1193 1.0820X3AISI316L 20 x 3.0 33012030 407 497 1431 1.2622X1.5AISI316L 22 x 1.5 33012215 151 226 650 0.7622X2AISI316L 22 x 2.0 33012220 220 301 867 0.9925X1.5AISI316L 25 x 1.5 33012515 132 199 572 0.8725X2AISI316L 25 x 2.0 33012520 192 265 763 1.1325X2.5AISI316L 25 x 2.5 33012525 254 331 954 1.3925X3AISI316L 25 x 3.0 33012530 318 397 1145 1.6325X4AISI316L 25 x 4.0 33012540 453 530 1526 2.0728X2AISI316L 28 x 2.0 33012820 195 263 757 1.2828X2.5AISI316L 28 x 2.5 33012825 225 296 852 1.5728X3AISI316L 28 x 3.0 33012830 281 355 1022 1.8530X2AISI316L 30 x 2.0 33013020 159 221 636 1.3830X2.5AISI316L 30 x 2.5 33013025 209 276 795 1.7030X3AISI316L 30 x 3.0 33013030 261 331 954 2.0030X4AISI316L 30 x 4.0 33013040 370 442 1272 2.5635X2AISI316L 35 x 2.0 33013520 135 189 545 1.6335X2.5AISI316L 35 x 2.5 33013525 178 237 681 2.0035X3AISI316L 35 x 3.0 33013530 222 284 818 2.3738X2.5AISI316L 38 x 2.5 33013825 163 218 628 2.1938X3AISI316L 38 x 3.0 33013830 203 261 753 2.5938X4AISI316L 38 x 4.0 33013840 285 349 1004 3.3538X5AISI316L 38 x 5.0 33013850 372 436 1255 4.0742X2AISI316L 42 x 2.0 33014220 112 158 454 1.9742X2.5AISI316L 42 x 2.5 33014225 147 197 568 2.4342X3AISI316L 42 x 3.0 33014230 183 237 681 2.8942X4AISI316L 42 x 4.0 33014240 256 315 909 3.7550X3AISI316L 50 x 3.0 33015030 152 199 572 3.4850X5AISI316L 50 x 5.0 33015050 275 331 954 5.5556X8.5AISI316L 56 x 8.5 33015685 451 503 1448 9.9660X3AISI316L 60 x 3.0 33016030 126 166 477 4.2260X5AISI316L 60 x 5.0 33016050 226 276 795 6.7866X8.5AISI316L 66 x 8.5 33016685 375 427 1229 12.0580X10AISI316L 80 x 10,0 33018010 365 414 1193 17.2197X12AISI316L 97 x 12,0 33019712 363 410 1180 25.50

1 DNV: Bended pipe including manufacturing and corrosion tolerances.2 DIN 2413 I static straight pipe including manufacturing tolerance.3 Burst pressure according to DIN 2413 I including manufacturing tolerance.

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


192

Hydraulic Tube St. 52.4 (E 355N) NBK To DIN 2391C (EN 10305-4)

Part No O.D. x W.T. ID CodeW.P. bar B.P. bar

kg/m1DNV

2DIN 2413 I

3DIN 2413 III

4DIN 2413 I

14X2ST52.4NBK 14 x 2.0 31011420 411 571 456 1371 0.5915X1.5ST52.4NBK 15 x 1.5 31011515 259 400 330 959 0.5015X2ST52.4NBK 15 x 2.0 31011520 381 533 429 1279 0.6116X1.5ST52.4NBK 16 x 1.5 31011615 242 375 311 899 0.5416X2ST52.4NBK 16 x 2.0 31011620 355 500 404 1199 0.6916X2.5ST52.4NBK 16 x 2.5 31011625 475 624 493 1499 0.8318X1.5ST52.4NBK 18 x 1.5 31011815 214 333 279 800 0.6118X2ST52.4NBK 18 x 2.0 31011820 313 444 364 1066 0.7920X2ST52.4NBK 20 x 2.0 31012020 279 400 330 959 0.8920X2.5ST52.4NBK 20 x 2.5 31012025 371 500 404 1199 1.0820X3ST52.4NBK 20 x 3.0 31012030 467 599 476 1439 1.2522X1.5ST52.4NBK 22 x 1.5 31012215 173 272 231 654 0.7622X2ST52.4NBK 22 x 2.0 31012220 252 363 303 872 0.9925X2ST52.4NBK 25 x 2.0 31012520 220 320 269 768 1.1325X2.5ST52.4NBK 25 x 2.5 31012525 291 400 330 959 1.3925X3ST52.4NBK 25 x 3.0 31012530 365 480 390 1151 1.6328X2ST52.4NBK 28 x 2.0 31012820 195 285 242 685 1.2828X3ST52.4NBK 28 x 3.0 31012830 322 428 352 1028 1.8530X2ST52.4NBK 30 x 2.0 31013020 182 266 226 640 1.3830X3ST52.4NBK 30 x 3.0 31013030 299 400 330 959 2.0030X4ST52.4NBK 30 x 4.0 31013040 424 533 429 1279 2.5635X2ST52.4NBK 35 x 2.0 31013520 155 228 196 548 1.6335X3ST52.4NBK 35 x 3.0 31013530 254 343 286 822 2.3738X3ST52.4NBK 38 x 3.0 31013830 233 315 265 757 2.5938X4ST52.4NBK 38 x 4.0 31013840 327 421 346 1010 3.3538X5ST52.4NBK 38 x 5.0 31013850 426 526 424 4262 4.1039X7.5ST52.4NBK 39 x 7.5 31013975 673 768 590 1845 5.8642X2ST52.4NBK 42 x 2.0 31014220 128 190 164 457 1.9742X3ST52.4NBK 42 x 3.0 31014230 209 285 242 685 2.8942X4ST52.4NBK 42 x 4.0 31014240 293 381 316 914 3.7546X8ST52.4NBK 46 x 8.0 31014680 601 695 541 1669 7.8450X5ST52.4NBK 50 x 5.0 31015050 315 400 330 959 5.5556X8.5ST52.4NBK 56 x 8.5 31015685 516 607 481 1456 9.9660X5ST52.4NBK 60 x 5.0 31016050 259 333 279 800 6.7860X6ST52.4NBK 60 x 6.0 31016060 319 400 330 959 8.0460X10ST52.4NBK 60 x 10.0 31016010 578 666 522 1599 12.3066X8.5ST52.4NBK 66 x 8.5 31016685 429 515 415 1236 12.0572X7ST52.4NBK 72 x 7.0 31017270 313 389 322 933 11.2275X5ST52.4NBK 75 x 5.0 31017550 205 266 226 640 8.6380X10ST52.4NBK 80 x 10.0 31018010 418 500 404 1199 17.2190X5ST52.4NBK 90 x 5.0 31019050 169 222 190 533 10.4897X12ST52.4NBK 97 x 12.0 31019712 416 494 401 1187 25.15115X15ST52.4NBK 115 x 15.0 310111515 444 521 420 1251 36.95130X15ST52.4NBK 130 x 15.0 310113015 388 461 376 1107 42.54150X15ST52.4NBK 150 x 15.0 310115015 332 400 330 959 49.94190X20ST52.4NBK 190 x 20.0 310119020 353 421 346 1010 83.84250X25ST52.4NBK 250 x 25.0 310125025 335 400 330 959 138.71

1 DNV: Bended pipe including manufacturing and corrosion tolerances.2 DIN 2413 I static straight pipe including manufacturing tolerance.3 DIN 2413 III dynamic straight pipe including manufacturing tolerance.4 Burst pressure according to DIN 2413 I including manufacturing tolerance.

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

193

Hydraulic Tube St. 37.4 (E 235N) NBK to DIN 2391C (EN 10305-4)


kg/m1DNV

2DIN 2413 I

3DIN 2413 III

4DIN 2413 I

4X1ST37.4NBK 4 x 1.0 32010410 397 707 555 1755 0.056X1ST37.4NBK 6 x 1.0 32010610 252 471 394 1170 0.076X1.5ST37.4NBK 6 x 1.5 32010615 475 707 555 1755 0.176X2ST37.4NBK 6 x 2.0 32010620 736 942 697 2340 0.198X1ST37.4NBK 8 x 1.0 32010810 184 353 305 878 0.178X1.5ST37.4NBK 8 x 1.5 32010815 341 530 436 1316 0.248X2ST37.4NBK 8 x 2.0 32010820 515 707 555 1755 0.308X2.5ST37.4NBK 8 x 2.5 32010825 712 883 663 2194 0.3410X1ST37.4NBK 10 x 1.0 32011010 145 283 249 702 0.2210X1.5ST37.4NBK 10 x 1.5 32011015 265 424 359 1053 0.3110X2ST37.4NBK 10 x 2.0 32011020 397 565 461 1404 0.4010X2.5ST37.4NBK 10 x 2.5 32011025 540 707 555 1755 0.4612X1.5ST37.4NBK 12 x 1.5 32011215 218 353 305 878 0.3912X2ST37.4NBK 12 x 2.0 32011220 322 471 394 1170 0.4912X2.5ST37.4NBK 12 x 2.5 32011225 435 589 477 1463 0.5914X1.5ST37.4NBK 14 x 1.5 32011415 184 303 266 752 0.4614X2ST37.4NBK 14 x 2.0 32011420 271 404 344 1003 0.5915X1.5ST37.4NBK 15 x 1.5 32011515 171 283 249 702 0.5015X2ST37.4NBK 15 x 2.0 32011520 252 377 324 936 0.6416X1.5ST37.4NBK 16 x 1.5 32011615 160 265 235 658 0.5416X2ST37.4NBK 16 x 2.0 32011620 234 353 305 878 0.6916X2.5ST37.4NBK 16 x 2.5 32011625 313 442 372 1097 0.8316X3ST37.4NBK 16 x 3.0 32011630 397 530 436 1316 0.9618X1.5ST37.4NBK 18 x 1.5 32011815 141 236 211 585 0.6118X2ST37.4NBK 18 x 2.0 32011820 206 314 275 780 0.7920X2ST37.4NBK 20 x 2.0 32012020 184 283 249 702 0.8920X2.5ST37.4NBK 20 x 2.5 32012025 245 353 305 878 1.0820X3ST37.4NBK 20 x 3.0 32012030 308 424 359 1053 1.2620X4ST37.4NBK 20 x 4.0 32012040 443 565 461 1404 1.5822X1.5ST37.4NBK 22 x 1.5 32012215 114 193 175 479 0.7622X2ST37.4NBK 22 x 2.0 32012220 166 257 228 638 0.9922X2.5ST37.4NBK 22 x 2.5 32012225 221 321 280 798 1.0925X2ST37.4NBK 25 x 2.0 32012520 145 226 203 562 1.1325X2.5ST37.4NBK 25 x 2.5 32012525 192 283 249 702 1.3925X3ST37.4NBK 25 x 3.0 32012530 241 339 294 842 1.6325X4ST37.4NBK 25 x 4.0 32012540 343 452 380 1123 2.07


Continue next page

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


194

Hydraulic Tube St. 37.4 (E 235N) NBK to DIN 2391C (EN 10305-4)


kg/m1DNV

2DIN 2413 I

3DIN 2413 III

4DIN 2413 I

28X2ST37.4NBK 28 x 2.0 32012820 129 202 182 501 1.2828X2.5ST37.4NBK 28 x 2.5 32012825 170 252 225 627 1.5728X3ST37.4NBK 28 x 3.0 32012830 213 303 266 752 1.8530X2ST37.4NBK 30 x 2.0 32013020 120 188 171 468 1.3830X3ST37.4NBK 30 x 3.0 32013030 197 283 249 702 2.0030X4ST37.4NBK 30 x 4.0 32013040 279 377 324 936 2.5635X2ST37.4NBK 35 x 2.0 32013520 102 161 148 401 1.6335X3ST37.4NBK 35 x 3.0 32013530 167 242 216 602 2.3738X2.5ST37.4NBK 38 x 2.5 32013825 123 186 169 462 2.1938X3ST37.4NBK 38 x 3.0 32013830 153 223 200 554 2.5938X4ST37.4NBK 38 x 4.0 32013840 216 297 261 739 3.3538X5ST37.4NBK 38 x 5.0 32013850 281 372 320 924 4.0738X6ST37.4NBK 38 x 6.0 32013860 349 446 376 1108 4.7442X2ST37.4NBK 42 x 2.0 32014220 85 135 124 334 1.9742X3ST37.4NBK 42 x 3.0 32014230 138 202 182 501 2.8942X4ST37.4NBK 42 x 4.0 32014240 194 269 238 669 3.7550X3ST37.4NBK 50 x 3.0 32015030 115 170 155 421 3.4860X3ST37.4NBK 60 x 3.0 32016030 95 141 130 351 4.2275X3ST37.4NBK 75 x 3.0 32017530 76 113 105 281 5.3290X3.5ST37.4NBK 90 x 3.5 32019035 75 110 102 273 7.47100X4ST37.4NBK 100 x 4.0 320110040 78 113 105 281 9.47115X4ST37.4NBK 115 x 4.0 320111540 68 98 92 244 10.98140X4.5ST37.4NBK 140 x 4.5 320114045 63 91 85 226 15.04165X5ST37.4NBK 165 x 5.0 320116550 60 86 80 213 19.73220X6ST37.4NBK 220 x 6.0 320122060 54 77 72 191 31.66273X6ST37.4NBK 273 x 6.0 320127360 44 62 59 154 39.41


TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

195

Type O.D. x W.T. ID CodeW.P. bar B.P. bar

kg/m1DNV

2DIN 2413 I

3DIN 2413 III

4DIN 2413 I

15X1.5ST52.4NBK/YC 15 x 1.5 31021515 259 400 330 959 0.5015X2ST52.4NBK/YC 15 x 2.0 31021520 381 533 429 1279 0.6416X1.5ST52.4NBK/YC 16 x 1.5 31021615 242 375 311 899 0.5416X2ST52.4NBK/YC 16 x 2.0 31021620 355 500 404 1199 0.6916X2.5ST52.4NBK/YC 16 x 2.5 31021625 475 624 493 1499 0.8318X1.5ST52.4NBK/YC 18 x 1.5 31021815 214 333 279 800 0.6118X2ST52.4NBK/YC 18 x 2.0 31021820 313 444 364 1066 0.7920X2ST52.4NBK/YC 20 x 2.0 31022020 279 400 330 959 0.8920X2.5ST52.4NBK/YC 20 x 2.5 31022025 371 500 404 1199 1.0820X3ST52.4NBK/YC 20 x 3.0 31022030 467 599 476 1439 1.2622X1.5ST52.4NBK/YC 22 x 1.5 31022215 173 272 231 654 0.7622X2ST52.4NBK/YC 22 x 2.0 31022220 252 363 303 872 0.9925X2.0ST52.4NBK/YC 25 x 2.0 31022520 220 320 269 768 1.1325X2.5ST52.4NBK/YC 25 x 2.5 31022525 291 400 330 959 1.3925X3ST52.4NBK/YC 25 x 3.0 31022530 365 480 390 1151 1.6328X2ST52.4NBK/YC 28 x 2.0 31022820 195 285 242 685 1.2828X3ST52.4NBK/YC 28 x 3.0 31022830 322 428 352 1028 1.8530X2ST52.4NBK/YC 30 x 2.0 31023020 182 266 226 640 1.3830X3ST52.4NBK/YC 30 x 3.0 31023030 299 400 330 959 2.0030X4ST52.4NBK/YC 30 x 4.0 31023040 424 533 429 1279 2.5635X2ST52.4NBK/YC 35 x 2.0 31023520 155 228 196 548 1.6335X3ST52.4NBK/YC 35 x 3.0 31023530 254 343 286 822 2.3738X3ST52.4NBK/YC 38 x 3.0 31023830 233 315 265 757 2.5938X4ST52.4NBK/YC 38 x 4.0 31023840 327 421 346 1010 3.3538X5ST52.4NBK/YC 38 x 5.0 31023850 426 526 424 4262 4.0742X3ST52.4NBK/YC 42 x 3.0 31024230 209 285 242 685 2.8942X4ST52.4NBK/YC 42 x 4.0 31024240 293 381 316 914 3.7550X5ST52.4NBK/YC 50 x 5.0 31025050 315 400 330 959 5.5550X6ST52.4NBK/YC 50 x 6.0 31025060 390 480 390 1151 6.5056X8.5ST52.4NBK/YC 56 x 8.5 31025685 516 607 481 1456 9.9660X5ST52.4NBK/YC 60 x 5.0 31026050 259 333 279 800 6.1860X6ST52.4NBK/YC 60 x 6.0 31026060 319 400 330 959 7.9775X5ST52.4NBK/YC 75 x 5.0 31027550 205 266 226 640 8.63

Hydraulic Tube St. 52.4 (E 355N) NBK to DIN 2391C (EN 10305-4)Electrodeposited zinc coating with yellow/blue passivation* (CR-VI-free)

Hydraulic Tube St. 52.4 (E 355N) with Yellow/Blue Passivation Surface


* = On request, see order example.

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


196

Type O.D. x W.T. ID CodeW.P. bar B.P. bar

kg/m1DNV

2DIN 2413 I

3DIN 2413 III

4DIN 2413 I

6X1ST37.4NBK/YC 6 x 1.0 32020610 252 471 394 1170 0.076X1.5ST37.4NBK/YC 6 x 1.5 32020615 475 707 555 1755 0.176X2ST37.4NBK/YC 6 x 2.0 32020620 736 942 697 2340 0.198X1ST37.4NBK/YC 8 x 1.0 32020810 184 353 305 878 0.178X1.5ST37.4NBK/YC 8 x 1.5 32020815 341 530 436 1316 0.248X2ST37.4NBK/YC 8 x 2.0 32020820 515 707 555 1755 0.308X2.5ST37.4NBK/YC 8 x 2.5 32020825 712 883 663 2194 0.3410X1ST37.4NBK/YC 10 x 1.0 32021010 145 283 249 702 0.2210X1.5ST37.4NBK/YC 10 x 1.5 32021015 265 424 359 1053 0.3110X2ST37.4NBK/YC 10 x 2.0 32021020 397 565 461 1404 0.4010X2.5ST37.4NBK/YC 10 x 2.5 32021025 540 707 555 1755 0.4512X1.5ST37.4NBK/YC 12 x 1.5 32021215 218 353 305 878 0.3912X2ST37.4NBK/YC 12 x 2.0 32021220 322 471 394 1170 0.4912X2.5ST37.4NBK/YC 12 x 2.5 32021225 435 589 477 1463 0.5915X1.5ST37.4NBK/YC 15 x 1.5 32021515 171 283 249 702 0.5015X2ST37.4NBK/YC 15 x 2.0 32021520 252 377 324 936 0.6416X1.5ST37.4NBK/YC 16 x 1.5 32021615 160 265 235 658 0.5416X2ST37.4NBK/YC 16 x 2.0 32021620 234 353 305 878 0.6916X2.5ST37.4NBK/YC 16 x 2.5 32021625 313 442 372 1097 0.8316X3ST37.4NBK/YC 16 x 3.0 32021630 397 530 436 1316 0.9618X1.5ST37.4NBK/YC 18 x 1.5 32021815 141 236 211 585 0.6118X2ST37.4NBK/YC 18 x 2.0 32021820 206 314 275 780 0.7920X2ST37.4NBK/YC 20 x 2.0 32022020 184 283 249 702 0.8920X2.5ST37.4NBK/YC 20 x 2.5 32022025 245 353 305 878 1.0820X3ST37.4NBK/YC 20 x 3.0 32022030 308 424 359 1053 1.2522X1.5ST37.4NBK/YC 22 x 1.5 32022215 114 193 175 479 0.7622X2ST37.4NBK/YC 22 x 2.0 32022220 166 257 228 638 0.9922X2.5ST37.4NBK/YC 22 x 2.5 32022225 221 321 280 798 1.0925X2ST37.4NBK/YC 25 x 2.0 32022520 145 226 203 562 1.1325X2.5ST37.4NBK/YC 25 x 2.5 32022525 192 283 249 702 1.3925X4ST37.4NBK/YC 25 x 4.0 32022540 343 452 380 1123 2.0728X2ST37.4NBK/YC 28 x 2.0 32022820 129 202 182 501 1.2828X2.5ST37.4NBK/YC 28 x 2.5 32022825 170 252 225 627 1.5728X3ST37.4NBK/YC 28 x 3.0 32022830 213 303 266 752 1.8530X2ST37.4NBK/YC 30 x 2.0 32023020 120 188 171 468 1.3830X3ST37.4NBK/YC 30 x 3.0 32023030 197 283 249 702 2.0030X4ST37.4NBK/YC 30 x 4.0 32023040 279 377 324 936 2.5135X2ST37.4NBK/YC 35 x 2.0 32023520 102 161 148 401 1.6335X3ST37.4NBK/YC 35 x 3.0 32023530 167 242 216 602 2.3738X2.5ST37.4NBK/YC 38 x 2.5 32023825 123 186 169 462 2.1938X3ST37.4NBK/YC 38 x 3.0 32023830 153 223 200 554 2.5938X4ST37.4NBK/YC 38 x 4.0 32023840 216 297 261 739 3.9538X6ST37.4NBK/YC 38 x 6.0 32023860 349 446 376 1108 4.7442X2ST37.4NBK/YC 42 x 2.0 32024220 85 135 124 334 1.9742X3ST37.4NBK/YC 42 x 3.0 32024230 138 202 182 501 2.8942X4ST37.4NBK/YC 42 x 4.0 32024240 194 269 238 669 3.7550X3ST37.4NBK/YC 50 x 3.0 32025030 115 170 155 421 3.4860X3ST37.4NBK/YC 60 x 3.0 32026030 95 141 130 351 4.2275X3ST37.4NBK/YC 75 x 3.0 32027530 76 113 105 281 5.32

Hydraulic Tube St. 37.4 (E 235N) NBK to DIN 2391C (EN 10305-4)Electrodeposited zinc coating with yellow/blue passivation * (CR-VI-free)

Hydraulic Tube St. 37.4 (E 235N) with Yellow/Blue Passivation Surface


* = On request, see order example.

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

197

Pipe to ANSI B36.19 ASTM A 312 TP 316 L

Type Nom. pipe sizeNPS x SCH Size O.D. x W.T. ID CodeW.P. bar B.P. bar

kg/m1 2

21.34X2.11TP316L 1/2 SCH 10 21.34 x 2.11 33012134211 270 891 1.0221.34X2.77TP316L 1/2 SCH 40 21.34 x 2.77 33012134277 354 1170 1.2921.34X3.73TP316L 1/2 SCH 80 21.34 x 3.73 33012134373 477 1575 1.6521.34X4.78TP316L 1/2 SCH 160 21.34 x 4.78 33012134478 611 2019 1.9821.34X7.47TP316L 1/2 SCH xxs 21.34 x 7.47 33012134747 956 3155 2.5526.67X2.11TP316L 3/4 SCH 10 26.67 x 2.11 33012667211 216 713 1.3026.67X2.81TP316L 3/4 SCH 40 26.67 x 2.81 33012667281 288 950 1.7126.67X3.91TP316L 3/4 SCH 80 26.67 x 3.91 33012667391 400 1321 2.3326.67X5.56TP316L 3/4 SCH 160 26.67 x 5.56 33012667556 569 1879 2.9426.67X7.82TP316L 3/4 SCH xxs 26.67 x 7.82 33012667277 800 2643 3.6433.4X2.77TP316L 1 SCH 10 33.40 x 2.77 33013340277 226 747 2.1333.4X3.38TP316L 1 SCH 40 33.40 x 3.38 33013340338 276 912 2.5433.4X4.55TP316L 1 SCH 80 33.40 x 4.55 33013340455 372 1228 3.2933.4X6.35TP316L 1 SCH 160 33.40 x 6.35 33013340635 519 1713 4.3033.4X9.09TP316L 1 SCH xxs 33.40 x 9.09 33013340909 743 2453 5.4542.16X2.77TP316L 1 1/4 SCH 10 42.16 x 2.77 33014216277 179 592 2.7342.16X3.56TP316L 1 1/4 SCH 40 42.16 x 3.56 33014216356 231 761 3.4442.16X4.85TP316L 1 1/4 SCH 80 42.16 x 4.85 33014216485 314 1037 4.5342.16X6.35TP316L 1 1/4 SCH 160 42.16 x 6.35 33014216635 411 1357 5.6942.16X9.70TP316L 1 1/4 SCH xxs 42.16 x 9.70 33014216970 628 2074 7.7648.26X2.77TP316L 1 1/2 SCH 10 48.26 x 2.77 33014826277 157 517 3.1648.26X3.68TP316L 1 1/2 SCH 40 48.26 x 3.68 33014826368 208 687 4.1148.26X5.08TP316L 1 1/2 SCH 80 48.26 x 5.08 33014826508 287 949 5.4948.26X7.14TP316L 1 1/2 SCH 160 48.26 x 7.14 33014826714 404 1333 7.3548.26X10.16TP316L 1 1/2 SCH xxs 48.26 x 10.16 330148261016 575 1897 9.5560.3X2.77TP316L 2 SCH 10 60.30 x 2.77 33016030277 125 414 3.9960.3X3.91TP316L 2 SCH 40 60.30 x 3.91 33016030391 177 584 5.5260.3X5.54TP316L 2 SCH 80 60.30 x 5.54 33016030554 251 828 7.6060.3X8.74TP316L 2 SCH 160 60.30 x 8.74 33016030874 396 1306 11.2860.3X11.07TP316L 2 SCH xxs 60.30 x 11.07 330160301107 501 1655 13.4473X2.11TP316L 2 1/2 SCH 5 73.00 x 2.11 33017303211 79 260 3.7673X3.05TP316L 2 1/2 SCH 10 73.00 x 3.05 33017303305 114 377 5.3773X5.16TP316L 2 1/2 SCH 40 73.00 x5.16 33017303516 207 684 8.8073X7.01TP316L 2 1/2 SCH 80 73.00 x7.01 33017303701 327 1079 11.6473X9.53TP316L 2 1/2 SCH 160 73.00 x 9.53 33017303953 356 1177 15.1573X14.02TP316L 2 1/2 SCH xxs 73.00 x 14.02 330173031402 524 1731 20.5088.9X2.11TP316L 3 SCH 5 88.90 x 2.11 33018890211 65 214 4.5988.9X3.05TP316L 3 SCH 10 88.90 x 3.05 33018890305 94 309 6.4588.9X5.49TP316L 3 SCH 40 88.90 x 5.49 33018890549 169 557 11.4688.9X7.67TP316L 3 SCH 80 88.90 x 7.67 33018890767 236 778 15.5188.9X11.13TP316L 3 SCH 160 88.90 x 11.13 330188901113 342 1128 21.6788.9X15.24TP316L 3 SCH xxs 88.90 x 15.24 330188901524 468 1545 27.68114.3X2.11TP316L 4 SCH 5 114.30 x 2.11 330111430211 50 166 5.93114.3X3.05TP316L 4 SCH 10 114.30 x 3.05 330111430305 73 240 8.50114.3X6.07TP316L 4 SCH 40 114.30 x 6.07 330111430607 145 479 16.32114.3X8.56TP316L 4 SCH 80 114.30 x 8.56 330111430856 204 675 22.67114.3X13.49TP316L 4 SCH 160 114.30 x 13.49 3301114301349 322 1064 34.05114.3X17.12TP316L 4 SCH xxs 114.30 x 17.12 3301114301712 409 1350 41.03

1 ANSI B313 straight pipe including manufacturing tolerance.2 Burst pressure including manufacturing tolerance.

Continue next page

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


198

Type Nom. pipe sizeNPS x SCH Size O.D. x W.T ID CodeW.P. bar B.P. bar

kg/m*1 *3

141.3X3.40TP316L 5 SCH 10 141.30 x 3.40 330114130340 66 217 11.56141.3X6.55TP316L 5 SCH 40 141.30 x 6.55 330114130655 127 418 22.10141.3X9.53TP316L 5 SCH 80 141.30 x 9.53 330114130953 184 608 31.40141.3X15.88TP316L 5 SCH 160 141.30 x 15.88 3301141301588 307 1013 49.11141.3X19.05TP316L 5 SCH xxs 141.30 x 19.05 3301141301905 368 1215 57.43168.3X2.77TP316L 6 SCH 5 168.30 x 2.77 330116830277 45 148 11.47168.3X3.4TP316L 6 SCH 10 168.30 x 3.40 330116830340 55 182 14.04168.3X7.11TP316L 6 SCH 40 168.30 x 7.11 330116830711 115 381 28.69168.3X10.97TP316L 6 SCH 80 168.30 x 10.97 3301168301097 178 587 43.21168.3X14.27TP316L 6 SCH 120 168.30 x 14.27 3301168301427 231 764 54.10168.3X18.26TP316L 6 SCH 160 168.30 x 18.26 3301168301826 296 978 67.56168.3X21.95TP316L 6 SCH xxs 168.30 x 21.95 3301168302195 356 1175 79.22219.1X3.76TP316L 8 SCH 10 219.10 x 3.76 330121910376 47 155 19.97219.1X8.18TP316L 8 SCH 40 219.10 x 8.18 330121910818 102 336 43.20219.1X12.70TP316L 8 SCH 80 219.10 x 12.70 3301219101270 158 522 66.02219.1X18.26TP316L 8 SCH 120 219.10 x 18.26 3301219101826 228 751 90.30219.1X23.01TP316L 8 SCH 160 219.10 x 23.01 3301219102301 287 946 111.30219.1X22.00TP316L 8 SCH xxs 219.10 x 22.00 3301219102200 274 905 107.00273X9.27TP316L 10 SCH 40 273.00 x 9.27 330127300927 93 306 60.40273X15.06TP316L 10 SCH 80 273.00 x 15.06 3301273001506 151 497 95.90273X28.58TP316L 10 SCH 160 273.00 x 28.58 3301273002858 286 944 171.90273X25.40TP316L 10 SCH xxs 273.00 x 25.40 3301273002540 254 839 101.90323.9X9.53TP316L 12 SCH STD 323.90 x 9.53 330132390953 80 265 73.90323.9X10.31TP316L 12 SCH 40 323.90 x 10.31 3301323901031 87 287 79.70323.9X17.45TP316L 12 SCH 80 323.90 x 17.45 3301323901745 147 486 131.90323.9X33.32TP316L 12 SCH 160 323.90 x 33.32 3301323903332 281 927 238.80355.6X9.53TP316L 14 SCH STD 355.60 x 9.53 330135560953 73 242 81.30355.6X11.13TP316L 14 SCH 40 355.60 x 11.13 3301355601113 85 282 94.50355.6X19.05TP316L 14 SCH 80 355.60 x 19.05 3301355601905 146 483 158.10355.6X35.71TP316L 14 SCH 160 355.60 x 35.71 3301355603571 274 905 281.70406.4X9.53TP316L 16 SCH STD 406.40 x 9.53 330140640963 64 211 93.30406.4X12.70TP316L 16 SCH 40 406.40 x 12.70 3301406401270 85 282 123.30406.4X21.41TP316L 16 SCH 80 406.40 x 21.41 3301406402141 144 475 203.30406.4X40.46TP316L 16 SCH 160 406.40 x 40.46 3301406404046 272 897 365.10457.4X9.53TP316L 18 SCH STD 457.40 x 9.53 330145740953 57 188 105.20457.4X14.27TP316L 18 SCH 40 457.40 x 14.27 3301457401427 85 281 155.80457.4X23.80TP316L 18 SCH 80 457.40 x 23.80 3301457402380 142 469 254.20457.4X45.24TP316L 18 SCH 160 457.40 x 45.24 3301457404524 270 891 459.40508X9.53TP316L 20 SCH STD 508.00 x 9.53 330150800953 51 169 117.10508X15.06TP316L 20 SCH 40 508.00 x 15.06 3301508001506 81 267 183.10508X26.19TP316L 20 SCH 80 508.00 x 26.19 3301508002619 141 465 311.20508X49.99TP316L 20 SCH 160 508.00 x 49.99 3301508004999 269 887 564.10609X9.53TP316L 24 SCH STD 609.00 x 9.53 330160900953 43 141 140.90609X17.45TP316L 24 SCH 40 609.00 x 17.45 3301609001745 78 258 254.60609X30.94TP316L 24 SCH 80 609.00 x 30.94 3301609003094 139 458 441.00609X59.51TP316L 24 SCH 160 609.00 x 59.51 3301609005951 267 881 806.50

Pipe to ANSI B36.19 ASTM A 312 TP 316

1 ANSI B313 straight pipe including manufacturing tolerance.2 Burst pressure including manufacturing tolerance.

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

199

Multicore Tubes

General InformationGS-Hydros multicore tubes are used for pneumatic and hydraulic remote control, measuring and monitoring systems. In addition to the multicore tubes, GS-Hydro also supplies the necessary connection tools and accessories such as heat shrinkable products, tube joint ttings, tube cutter and bending tools as well as trays, supports and binding tape for installation.

The multicore tube consists of one to nine stainless steel, copper or copper-alloy tubes laid up spirally inside an extruded outer PVC sheath. For easy identication and protection purposes each individual tube is PVC sheathed in a different color. The extruded outersheath is made of oil and sea water resistant, weather-proof, ame-retardant, corrosion and acid resistant PVC. The multicore tube (outer sheath) is continuously marked at every one meter throughout the entire length for easy installation. Heat shrinkable products provide complete water sealing and abrasion and corrosion protection under all conditions.

Colored identifying inner sheath

Tube

Filler

PVC Rod

Outer Sheath

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


200

Multicore Tubes

Technical Data

Tube type Bare tubeSheathed single tubeMulticore tube

Materials Stainless steel AISI 304/316/316LCopperCopper-Nickel

Length Standard 100300 m, up to 600 m packed on wooden drum

Tube diameter 615 mm (1/41/2)Tube wall thickness 0.52.0 mm

No. of tubes per bundle 19 (max. 9core)Outer sheath PVC, black color with marking

Individual tube sheath PVC, color identication

All tubing products are certied by major classication agencies including DnV, GL, ABS, LRS and BV etc. The multicore tubes are extensively tested, including eddy current, tensile and hardness, hydro and air pressure and air leak tests.

Schematic Structural Diagram

1CORE 2CORE 3CORE 4CORE 5CORE 6CORE 7CORE 8CORE 9CORE

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

201

Multicore Tubes

Installation and AssemblyThe installation of the multicore tubes - the uncoiling from the wooden shipping drum, straightening, running and cutting is done in the same manner as when installing electrical cables.

The multicore tubes are uncoiled directly from sturdy wooden reels onto ladder, perforated or at-bar (or eq.) trays. Deck and/or bulkhead penetrations are made by either coaming or by appropriate penetration ttings. Suitable ttings such as straight union, male/female

connector, penetration gland etc. are utilised for connection or termination of the tube. Multicore tubes can also be welded but the use of bite type ttings is recommended.

Repeated bending at the same point should be avoided in order to avoid breakage. Where there is a possibility of expansion and/or contraction along the line, proper provisions should be made for loops and curves along the tube line.

Order Example

Material of Outer Sheath

10 x 1 / 6 PVC

Number of Cores Core Size

O.D. x Wall Thickness

Union

Heat-shrinkable boot

6 Cores

Bending radius approx: 8 x outer dia

4 Cores

2 Cores1 Core

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


202

Multicore Tubes

Maximum allowable working pressureThe maximum allowable working pressure (bar) for stainless steel, copper and copper-n ickel multicore tubes are as follows:

Seamed Stainless Steel Tube

O.D.(mm)

Wall Thickness (mm)0.5 0.8 1.0 1.2 1.5 2.0

6 160 270 350 - - -

8 120 195 250 310 - -

10 95 155 195 240 310 -

12 - 125 160 195 250 350

15 - - 125 155 195 270

Seamed Stainless Steel Tube

O.D.(in.)

Wall Thickness (in.)0.035 0.049

1/4 275 410

3/8 180 264

1/2 140 200

Copper Tube

O.D.(mm)

Wall Thickness (mm)O.D.(in.)

W.T. (in.)0.8 1.0 1.2 0.035 0.049

6 120 150 180 1/4 130 180

8 85 110 130 3/8 85 110

10 - 85 100 1/2 - 85

12 - 70 85

Cu-Ni (90/10) Tube

O.D.(mm)

Wall Thickness (mm)1.0 1.4 1.5

10 130 190 200

12 - 160 170

Materials

Tube Material

MaterialNational Standard

KS JIS ASTM DIN

Stainless Steel

STS 304 SUS 304 304 1.4301

STS 316 SUS 316 316 1.4401

STA 316L SUS 316L 316L 1.4404

Copper C1220 C1220 C12200 SF-Cu

Copper-Nickel (90/10) C7060 C7060 C70600 CuNi10Fe1Mn

Sheath Material

Name Material Remark

Rod PVC

Seawater and oil resistant. Flame retardant (IEC 60332 ammabil ity test criteria) or halogem free (LDPE/HDPE)

Colored identifying sheath PVC

Filler Synthetic rubber

Outer sheath PVC

TUBES & PIPES

GS-P

RODU

CTS

CLAM

PSBI

TE T

YPE

FITT

INGS

SAE

J514

JIC

FLAR

E FI

TTIN

GSHO

SES

&

HOSE

COU

PLIN

GSAD

APTO

RSSP

ECIA

LSO

LUTI

ONS

MAC

HINE

STE

CHNI

CAL

INFO

RMAT

ION

VALV

ESTU

BES

& P

IPES

203

Multicore Tubes

Technical Data Metric Sizes

O.D. (mm) x

Core

Bundle Weight (kg/m)Overall diameter

approx.(mm)

Stainless Steel Copper & Copper alloy

Wall Thickness (mm) Wall Thickness (mm)0.5 0.8 1.0 0.8 1.0 1.2

6 x 1 0.15 0.18 0.20 0.20 0.22 - 9

6 x 2 0.60 0.67 0.71 0.70 0.74 - 19

6 x 3 0.75 0.86 0.92 0.90 0.97 - 20

6 x 4 0.82 0.96 1.04 1.10 1.19 - 23

6 x 5 0.90 1.08 1.18 1.14 1.25 - 24

6 x 6 1.04 1.25 1.37 1.34 1.47 - 27

6 x 7 1.15 1.39 1.53 1.40 1.56 - 27

6 x 8 1.40 1.68 1.84 1.60 1.78 - 32

6 x 9 1.60 1.92 2.01 1.85 2.05 - 34

8 x 1 0.20 0.25 0.28 0.27 0.31 0.34 11

8 x 2 0.73 0.83 0.89 0.87 0.94 0.97 23

8 x 3 0.85 1.02 1.12 1.07 1.18 1.28 24

8 x 4 1.00 1.20 1.33 1.29 1.43 1.56 28

8 x 5 1.30 1.52 1.67 1.59 1.77 1.93 31

8 x 6 1.50 1.82 2.00 1.94 2.15 2.34 33

8 x 7 1.63 1.93 2.15 2.08 2.33 2.56 33

8 x 8 1.90 2.35 2.60 2.52 2.80 3.04 41

8 x 9 2.10 2.67 2.95 2.88 3.20 3.49 43

10 x 1 - 0.30 0.34 - 0.37 0.41 13

10 x 2 - 1.10 1.18 - 1.24 1.32 28

10 x 3 - 1.50 1.60 - 1.68 1.81 29

10 x 4 - 1.80 1.97 - 2.09 2.26 33

10 x 5 - 2.00 2.20 - 2.33 2.55 37

10 x 6 - 2.15 2.40 - 2.57 2.83 40

10 x 7 - 2.28 2.52 - 2.80 3.10 40

10 x 8 - 2.95 3.20 - 3.60 3.95 48

10 x 9 - 3.30 3.80 - 4.15 4.54 51

12 x 1 - 0.36 0.41 - 0.39 0.45 15

12 x 2 - 1.38 1.42 - 1.44 1.50 33

12 x 3 - 1.81 1.96 - 1.91 2.08 38

12 x 4 - 2.13 2.37 - 2.26 2.53 39

12 x 5 - 2.44 2.70 - - - 40

12 x 6 - 2.70 3.00 - - - 48

O.D. (mm) x

Core

PVC Sheathed Tube Weight (kg/m)Overall diameter

approx.(mm)


Wall Thickness (mm) Wall Thickness (mm)1.0 1.2 1.5 2.0 1.0 1.2

10 x 1 0.34 0.38 0.43 0.51 0.37 0.41 13

12 x 1 0.41 0.46 0.53 0.63 0.44 0.49 15

15 x 1 0.52 0.58 0.67 - 0.56 0.63 18

GS-PRODUCTSVALVES

BITE TYPEFITTINGS

TUBES & PIPES


ADAPTORSSPECIAL

SOLUTIONSM

ACHINESTECHNICAL

INFORMATION

CLAMPS

TUBES & PIPES


204

O.D. (in.) x

Core

Bundle Weight (kg/m)Overall diameter

approx.(mm)


Wall Thickness Wall Thickness

0.035 1.0 mm 0.049 1.2 mm 0.035 0.049

1/4 x 1 0.20 0.21 0.24 0.24 0.21 0.26 9

1/4 x 2 0.75 0.77 0.83 0.81 0.78 0.87 23

1/4 x 3 1.00 1.04 1.12 1.10 1.04 1.18 23

1/4 x 4 1.10 1.15 1.26 1.28 1.16 1.34 24

1/4 x 5 1.20 1.26 1.40 1.36 1.27 1.50 27

1/4 x 6 1.40 1.47 1.64 1.60 1.49 1.76 34

3/8 x 1 0.32 0.34 0.38 0.37 0.34 0.41 13

3/8 x 2 1.14 1.18 1.27 1.25 1.18 1.33 27

3/8 x 3 1.55 1.62 1.75 1.72 1.62 1.84 28

3/8 x 4 1.90 1.98 2.16 2.12 1.99 2.28 33

3/8 x 5 2.15 2.25 2.48 2.43 2.26 2.63 37

3/8 x 6 2.35 2.47 2.74 2.68 2.47 2.86 39

1/2 x 1 - 0.42 0.48 0.47 - 0.52 16

1/2 x 2 - 1.36 1.49 1.48 - 1.57 36

1/2 x 3 - 1.97 1.94 1.92 - 2.06 38

1/2 x 4 - 2.32 2.70 2.65 - 2.85 43

Technical Data Imperial Sizes

Multicore Tubes

Tools and AccessoriesTools and accessories include heat shrinkable products, tube joint ttings, tube cutter and bending tools as well as trays, supports and binding tape.

Tools Accessories

Tube cutter

Multicore tube, tray and supportMulticore tube bending tools

Bending tools Heat shrinkable products Tube ttings

Clamps Binding tape

Button3:

tubes ＆ pipes

Documents