True GreatnessWOLF Large-space Spray Booths for commercial vehicles and engine building

on the top with us

OberflächentechnikSurface Engineering

2 3

King Size Booths Highest Level in Equipment and Quality

Success by ExperienceFor more than 25 years, WOLF spray booths for commercial vehicles and engine building have been a term for highest quality and modern technology. WOLF provides the requirements for your successful products.

Customer-specific Solutions for any Demand

If semi-trucks, tramways, pump housings or wind-driven wheels - WOLF offers you the solution to your requirements by own plan-ning and production.

We are planning for you exactly the booth technology you need to realize your aims.

Highest reliability, easy maintenance and maximal energy efficiency are always the basic features of the installed booths.

Excellent surface quality, perfect protection against corrosion and outstanding optics are marking first-class products not only for spraying passenger cars, but also for commercial vehicles and in engine building.

Our competence is your advance

u Competence in planning and construction

u Renowned manufacturer of air-conditio-ning and ventilation plants

u High production depth on maximal quality level

u Own control system construction

u Strong and reliable service

u More than 300 employees

u Best references in automotive and paint industry, institutes and training centres

u Representations in 14 countries

u Export to over 40 countries

2 3

TechnologyThe highest Level of Energy Efficiency

As a manufacturer of ventilation and air-conditioning plants, WOLF is able to conceive even booths with complex airflow requirements, so that your spray booth will be completely made by one hand and 100 percent optimized - also regarding energy consumption.

transferred, highly efficient rotary heat exchangers are used.

However, energy efficiency means far more than using heat recovery systems.

Control System and Regulation

Modern mode programmes are controlling the optimal energy application for each kind of operation such as preparing, spraying, evaporating and drying. Single booth sections in large-space booths can be switched so that only the respective zone where paintwork is done is run with full air capacity.

Rotary heat exchanger for heat and humidity recovery with high efficiency

Air technology and heat recovery

One of the great advantages of WOLF is the wide ventilation and air-conditioning programme by own production, providing the optimal conception for nearly each requirement.

Essential is, for example, the right selection and dimensioning of heat recovery systems. In most cases, the approved plate exchanger modules are used. If also humidity is to be

Machinery complex with heat recovery and optionally with highly insulated oven machinery

4 5

Painting Special Superstructures

In this specialized company, commercial vehicles are professionally modified or provided with special superstructures. Finally, chassis and/or superstructures are painted acc. to customer‘s request.

The spray booth (in masonry, 18 m long) is subdividable by roller doors into 2 sections (1/3 to 2/3). Ventilation in the smaller section is vertical, in the larger one diagonal, by 2 machineries side by side.

Commercial Vehicles

4 5

2 booths for commercial vehicles in masonry serve this well-known logistics company for repair paintwork of trucks and semi-trucks, so that his fleet always leaves a good impression.

The air guidance in the booths is diagonal. An especially powerful machinery with heat recovery is used for each booth.

TrucksWell-cared Appearance of a big Forwarder

6 7

Painting Special Commercial Vehicles

This well-known manufacturer of dumping, disposal, pushing floor and special vehicles is working with two parallel large-space booths (20 x 5,5 x 6 m, each) with sectionally switched ventilation. 2 powerful machineries are assigned to each booth. Optionally either zone 1 or zone 2 is ventilated vertically. Alternatively, each booth can be ventilated diagonally over its whole length.

The generous substructure - which can be walked upon - enables an especially comfortable filter exchange.

Commercial Vehicles

6 7

In this in total 22 m long booth of a paint and bodyshop, trucks and other large vehicles are painted. 2 fast sectional doors assure a speedy entrance and exit, a central roller door enables a subdivision into two completely independent sections.

Also on open working bays, the prerequisites for high-quality results must be given. The pictures below right-hand show two open spraying zones with generously dimensioned vertical air guidance.

Passage free for new Outfit

Trucks

8 9

With this spray booth (18 x 6 m, in masonry, diagonally ventilated), this contract coating company is prepared for any case.

Who loves the special, will paint with WOLF. Thus, you will shine everywhere, for example with the exclusive special horse transporter… Nevertheless, working ergonomics are not neglected by WOLF: The large assembly pit with ventilation and good luminous conditions is an optimal working place also for the sprayer.

Exklusive Surface for Special Vehicles

Commercial Vehicles

8 9

For sturdy and high quality paintwork of buses, WOLF combi-booths in different designs are being used worldwide.

The pictures show a large-space booth (24 m long, subdividable into 2 sections by roller doors), a preparation bay for buses with separating shutters beside a passage booth and a high booth for double-decker buses.

WOLF Spray Booth for Travelling and Line Buses

Trucks, Buses

10 11

Repair Paintwork of Rail Vehicles

This 40 m long special large-space booth for tramway trains is subdividable into 3 single booths by electric roller doors.

Clean air is supplied by large-surface filter ceilings with finest filter mats, paint mist is separated laterally by dry filters. The air capacity of the booth is 180.000 m3/h, the air inlet plant is equipped with a humidification.

By the working platforms movable in three levels over the whole length of the large-space booth, the sprayers are very flexible.

Lighting, extraction and air guidance of this special track construction machine are optimized to the massive rail vehicles.

Commercial Vehicles

10 11

SpecialAloft with WOLF

WOLF spraying and drying booths for planes, aircraft and satellite parts are already being used on many commmercial and military airports and in special facilities of the aerospace industry.

The large picture on this page shows an open space spray booth for military planes, the picture file below a booth for aircraft parts, a clean room booth for special coating of plastic parts and a sprayer coating a satellite part.

12 13

Especially the heavy offshore wind wheel gears are produced by this North German engine building company. The gear cases are painted in 2 parallel spraying lines with zone circuit (4 spraying zones) in a separate hall section.

Since wind power plants are exposed to extreme weather conditions, an extremely high-grade protective layer is applied.

Machine Parts Special Coating for Offshore Wind-driven Wheels

12 13

This well-known pump manufacturer is painting large pumps with weights up to 25 t and dimensions of 5,5 x 4 x 3 m in this new spray booth.The pumps are brought into the booth by means of a bridge crane. For this purpose, the booth roof is opened automatically in the middle.

Paint for High-Performance Pumps

14 15

Painting Telescopic Arms

The South German manufacturer of skyscraper outside lifts and transport platforms for persons and material is painting in a WOLF large-space spraying and drying booth.

The diagonally ventilated spray booth (13 x 4 x 3,5 m) offers enough space for the bulky parts which are brought in by manual sliding trolleys. The machineries are arranged on a steel platform above the booth, very compact and easy to maintain.

Machine Parts

14 15

In this combi-booth (13 x 5 m, diagonally ventilated), machine parts - here for example large stirrers for a chocolate factory - are prepared with high-grade paint for their use.

The large-scale booth is completed by a smaller combi-booth with manual suspension conveyor. This double booth assures an optimal throughput at minimal energy expenditure to the engine builder from North Rhine-Westphalia. The machineries of the booth are placed on a steel platform above the booth.

Special Paint for Food Stirrers

16 17

Heavy Components

WOLF complete booth for pretreatment, spraying and drying of heavy crane parts up to 4,3 t single weight. The enormously heavy workpieces are moved without efforts by heavy-duty ceiling conveyor with a manual sliding system. In this booth, exclusively water paints are applied.

Machine Parts

16 17

Also this Russian manufacturer has decided on a continuous booth by WOLF for painting his Diesel engines. Beside spray booth and oven, the plant is equipped with a Power & Free heavy-duty conveyor system. The conveyor is working in a 12 minutes cycle and is rated for a parts weight of up to one ton.

The energy-saving programmes and the efficient heat recovery reduce the energy consumption to a minimum.

Motors in Passage

18 19

Schichtbetrieb auf ganzer Länge

Partly in 3-shift operation, this worldwide famous engine building company is painting large units like cutters and picking attachments for agricultural harvesters.

In the 11 m long combi-booth and the oven (also 11 m long, placed behind the booth), even the impressively large units find enough space.

Machine Parts

In this booth in masonry by WOLF, an industrial en-gineering company with more than 20 branches in

Germany is painting above all high-grade special parts for the automotive industry.

18 19

Robot Painting

The repair department of this worldwide leading supplier of robots, plant and system engineering is equipped with a WOLF combi-booth.

Interesting: Complete grating and central lane to the central lifting platform.

20 21

Machine Parts

Even especially bulky and heavy components are provided by this contract coater with a high-grade protective painting for their hard workaday use.

A WOLF combi-booth with closable ceiling opening for crane feeding and a combi-booth with additional oven for feeding by manual conveyor are in operation.

Clear Entrance for Heavy Parts

20 21

Painting Tunnel Heading Machine Parts

The manufacturer of tunnel heading machines and plants trusts in WOLF large-space booths. The booth shown is one of three WOLF large-space booths of the engine builder and is used mainly for painting tubbing formwork.

This vertically ventilated combi-booth with generously glazed folding gates measures 13 x 6 x 6 m (l x w x h), the high-performance machinery is placed beside the booth.

22 23

Powder Coating

Agricultural machines are this engine building company‘s passion. For the highly stressed surface, the company relies on a powder coating plant by WOLF with 3-zones pretreatment.

The up to one ton heavy and up to 6 m long parts are transported through the booth by a Power & Free heavy-duty conveyor system.

Surfaces for Agricultural Machines

22 23

In this combined wet paint and powder coating plant with a 5 chamber / 8 basin pretreatment plant, high-grade parts for railway industry, exhibition stands and building facades are painted. Powder application is effected fully automatically, the wet paint is applied manually.

The workpieces are up to 6 m long and up to 600 kg heavy. They are transported by a Power & Free conveyor in a 6 minutes cycle.

The Sturdy Surface

In this powder coating plant with pretreatment in Slovenia, forest cable winches and agricultural machine parts up to a size of 2 x 1,7 m and a weight of 600 kg are coated.

9M05

ND

0

GB Printed in Germany

on the top with us

Mod

ifica

tions

in d

esig

n an

d fu

nctio

n re

serv

ed

WOLF Anlagen-Technik GmbH & Co. KGSurface Engineering DivisionMünchener Str. 5485290 Geisenfeld, GERMANYTelephone +49 ( 0 ) 8452 99-0Telefax +49 ( 0 ) 8452 99-350E-Mail info.ot @ wolf-geisenfeld.de Internet www.wolf-geisenfeld.de