truckers drive your top and bottom line by hauling hazmat · bottom line, when a driver is rolling...
TRANSCRIPT
DANGER
TM
SafetyManagementSolutions
Truckers drive your top and bottom line by hauling HAZMATGeorge P. Kongalath – CEO Ideabytes Inc.
“A rose by any other name is still a rose” wrote Shakespeare, by the same token for a
trucker, a load is still a load whether it is HAZMAT or normal goods. Realistically speaking, most
companies shipping goods by trucks, do not just ship HAZMAT. In all probability the HAZMAT seg-
ment averages about 10% of the goods that are hauled on the highways around the world. Compa-
nies prefer to hire trucking services from companies that haul both HAZMAT and Non-HAZMAT
loads. If an independent trucker or a trucking company does not haul HAZMAT, it is very unlikely that
they will be identified as a preferred trucking operator, eliminating the potential of business.
After talking to many drivers and companies across the United States and Canada, the chorus
that was repeated most often was that they were overwhelmed by the intricacies of the regulations
that govern the transport of HAZMAT. Many a driver has complained of getting expensive violations
that have resulted in a loss of revenue and hours spent in the legal system trying to prove that the
violation was incorrectly issued.
When stopped at weigh stations for inspections, HAZMAT loads can cause delays of an hour or
more while the officer determines whether the loads are compliant to the regulations. Bottom line,
when a driver is rolling with a laden trailer, they are earning money. Violations and inspection delays
cut deep into income and profitability.
Now that the problem is clear – what does a trucker or a trucking company have to do to haul
HAZMAT and have a positive experience both financially and operationally?
The answer to this question is the judicious use of cutting edge tools to assist the company
and the driver to ensure 100% compliance to the regulations. Cellular data service and Wi-Fi have
been key enablers for application developers to create the tools that are intuitive for the workforce
that are used to the traditional tools of the trade. Use of these tools are vital for the trucking organi-
zation to validate the loads they are hauling are compliant to the transportation regulations.
At an inspection station, when an inspector sees placarding for HAZMAT, more often than not,
they will ask to see the manifests for the load. The driver promptly presents the officer a sheaf of
papers – many of which unfortunately are barely legible. Officers are human – so here is the first
important rule - Ensure the paperwork carried is legible.
If the loads on the truck all belong to the same class, the inspections are painless for both the
driver and the inspector. If the paperwork is correct, and the trailer looks normal, the inspection will
be short and painless. If the loads belong to multiple classes, now the inspector has to evaluate
whether or not the segregation and placarding rules have been applied correctly. The trigger for the
officer to inspect the paperwork closely starts with the shipping document. If it does not have the UN number, Proper Shipping Name, Packing Group, Net Quantity of HAZMAT and packing listed in sequence, it is a red light. Tools such as DGSMSTM, a web based
application, when used by a Consolidating facility generates a summary manifest which lists each of
the loads correctly and the placarding that is required tells the inspector that the truck being inspect-
ed has gone the extra distance to ensure compliance. Companies using DGSMS have seen their
average inspection times for HAZMAT drop to less than 5 minutes and have not had a placarding
infraction.
The input to any system is the declaration, and a very large percentage does not meet the
requirements laid out by the regulations. So how does a trucking company get the shipper to issue correct documentation? Refusing the load is not the answer as it will just black list
them. The answer is to give them a copy of DGDOXTM which is free for the first year. The trucking
company’s logo is listed as the sponsoring company on the declaration which is great advertising.
The system requires no IT support and works on web – so any web browser on a PC, laptop, or ipad
works just fine. Declarations generated by the system are accurate and repeatable. When a driver
sees a DGDOXTM declaration, they can be confident, that the paper work will pass the inspectors
scrutiny.
Given this is in place, it now become the driver’s responsibility to ensure the loads are complaint. How does a driver who loves the road and has little interest in regulations achieve
this? The answer is DGMobiTM, an android application into which the driver inputs the UN number
listed in the declaration, the driver can verify that the Proper shipping name matches the documenta-
tion, and then enters the number of packages, the net HAZMAT weight. The application then displays
the placarding required based on the cumulative load on the truck. If loads are incompatible because
of segregation rules, the driver is advised not to accept the load. Based on the cumulative loads, a 1
gallon can of paint can trigger the display of a placard. A low cost application – helps the driver stay
compliant when picking up the loads from a facility. At an inspection the electronic summary in many
instances satisfies an inspector. In addition the application also carries the ERG – which also com-
plies with the regulation that requires that the ERG be at arm’s length in the cab.
Now that the paper work is compliant, the loads are properly placarded; the driver has two more
responsibilities. The first being to check the loads are in good shape, inspect drums to see that they
are not corroded, the packages are not split, or leaking and most important have the certification
stamp. Unless the declaration states that the loads are exempt from certified pack-aging, it is mandatory to have the certification stamp and the primary and second-ary class labels (if it applies) on every package and on the four sides of an over-pack. The last step is to correctly block and brace the loads. Hauling HAZMAT requires the
extra attention that the loads are properly blocked and braced. This step can save a driver’s life and
the life of others in a collision, or roll-over. As soon as the doors are opened and the inspector sees
the loads properly blocked and braced, the over packs are marked correctly, it will give them the
confidence that the loads are being transported as per regulations.
As a tribute to the inspectors, who work in rain, shine and snow, the compliance software is
available at no charge. Inspectors with a government email address can register and use it for free.
The DOT 49 CFR compliant service is available at [email protected], the Canadian TDG
compliant service is available at [email protected]
After reading this article, the author hopes to inspire drivers and companies to haul HAZMAT
profitably and with the knowledge that it can be done safely and with relative ease. Still not
convinced, use our second opinion service to help you figure out what it takes to get your business
hauling HAZMAT in compliance with the regulations. For periodic papers on hauling HAZMAT, Visit
the web site www.dgsms.ca or subscribe to it by sending and email to [email protected] with the
subject – Register me for the white papers and your contact details in the body.
Wishing all the drivers who keep our economy on the move, Safe trucking!
About the author:
George has been involved in the automation of regulatory systems since 1995 and has
pioneered digital driver’s licence and passport systems. His team which includes compli-
ance experts who have been involved in the shipping of HAZMAT for almost two decades,
Chemists with Ph.D.’s and a team of highly skilled computer engineers. The focus is to
enable the safe transportation of HAZMAT for the security of the population, the environ-
ment and those that transport it.
For more white papers
June 14 2016
www.dgsms.ca | [email protected] | Phone : 1-(888)-409-8057
“A rose by any other name is still a rose” wrote Shakespeare, by the same token for a
trucker, a load is still a load whether it is HAZMAT or normal goods. Realistically speaking, most
companies shipping goods by trucks, do not just ship HAZMAT. In all probability the HAZMAT seg-
ment averages about 10% of the goods that are hauled on the highways around the world. Compa-
nies prefer to hire trucking services from companies that haul both HAZMAT and Non-HAZMAT
loads. If an independent trucker or a trucking company does not haul HAZMAT, it is very unlikely that
they will be identified as a preferred trucking operator, eliminating the potential of business.
After talking to many drivers and companies across the United States and Canada, the chorus
that was repeated most often was that they were overwhelmed by the intricacies of the regulations
that govern the transport of HAZMAT. Many a driver has complained of getting expensive violations
that have resulted in a loss of revenue and hours spent in the legal system trying to prove that the
violation was incorrectly issued.
When stopped at weigh stations for inspections, HAZMAT loads can cause delays of an hour or
more while the officer determines whether the loads are compliant to the regulations. Bottom line,
when a driver is rolling with a laden trailer, they are earning money. Violations and inspection delays
cut deep into income and profitability.
Now that the problem is clear – what does a trucker or a trucking company have to do to haul
HAZMAT and have a positive experience both financially and operationally?
The answer to this question is the judicious use of cutting edge tools to assist the company
and the driver to ensure 100% compliance to the regulations. Cellular data service and Wi-Fi have
been key enablers for application developers to create the tools that are intuitive for the workforce
that are used to the traditional tools of the trade. Use of these tools are vital for the trucking organi-
zation to validate the loads they are hauling are compliant to the transportation regulations.
At an inspection station, when an inspector sees placarding for HAZMAT, more often than not,
they will ask to see the manifests for the load. The driver promptly presents the officer a sheaf of
papers – many of which unfortunately are barely legible. Officers are human – so here is the first
important rule - Ensure the paperwork carried is legible.
If the loads on the truck all belong to the same class, the inspections are painless for both the
driver and the inspector. If the paperwork is correct, and the trailer looks normal, the inspection will
be short and painless. If the loads belong to multiple classes, now the inspector has to evaluate
whether or not the segregation and placarding rules have been applied correctly. The trigger for the
officer to inspect the paperwork closely starts with the shipping document. If it does not have the UN number, Proper Shipping Name, Packing Group, Net Quantity of HAZMAT and packing listed in sequence, it is a red light. Tools such as DGSMSTM, a web based
application, when used by a Consolidating facility generates a summary manifest which lists each of
the loads correctly and the placarding that is required tells the inspector that the truck being inspect-
ed has gone the extra distance to ensure compliance. Companies using DGSMS have seen their
average inspection times for HAZMAT drop to less than 5 minutes and have not had a placarding
infraction.
The input to any system is the declaration, and a very large percentage does not meet the
requirements laid out by the regulations. So how does a trucking company get the shipper to issue correct documentation? Refusing the load is not the answer as it will just black list
them. The answer is to give them a copy of DGDOXTM which is free for the first year. The trucking
company’s logo is listed as the sponsoring company on the declaration which is great advertising.
The system requires no IT support and works on web – so any web browser on a PC, laptop, or ipad
works just fine. Declarations generated by the system are accurate and repeatable. When a driver
sees a DGDOXTM declaration, they can be confident, that the paper work will pass the inspectors
scrutiny.
Given this is in place, it now become the driver’s responsibility to ensure the loads are complaint. How does a driver who loves the road and has little interest in regulations achieve
this? The answer is DGMobiTM, an android application into which the driver inputs the UN number
listed in the declaration, the driver can verify that the Proper shipping name matches the documenta-
tion, and then enters the number of packages, the net HAZMAT weight. The application then displays
the placarding required based on the cumulative load on the truck. If loads are incompatible because
of segregation rules, the driver is advised not to accept the load. Based on the cumulative loads, a 1
gallon can of paint can trigger the display of a placard. A low cost application – helps the driver stay
compliant when picking up the loads from a facility. At an inspection the electronic summary in many
instances satisfies an inspector. In addition the application also carries the ERG – which also com-
plies with the regulation that requires that the ERG be at arm’s length in the cab.
Now that the paper work is compliant, the loads are properly placarded; the driver has two more
responsibilities. The first being to check the loads are in good shape, inspect drums to see that they
are not corroded, the packages are not split, or leaking and most important have the certification
stamp. Unless the declaration states that the loads are exempt from certified pack-aging, it is mandatory to have the certification stamp and the primary and second-ary class labels (if it applies) on every package and on the four sides of an over-pack. The last step is to correctly block and brace the loads. Hauling HAZMAT requires the
extra attention that the loads are properly blocked and braced. This step can save a driver’s life and
the life of others in a collision, or roll-over. As soon as the doors are opened and the inspector sees
the loads properly blocked and braced, the over packs are marked correctly, it will give them the
confidence that the loads are being transported as per regulations.
As a tribute to the inspectors, who work in rain, shine and snow, the compliance software is
available at no charge. Inspectors with a government email address can register and use it for free.
The DOT 49 CFR compliant service is available at [email protected], the Canadian TDG
compliant service is available at [email protected]
After reading this article, the author hopes to inspire drivers and companies to haul HAZMAT
profitably and with the knowledge that it can be done safely and with relative ease. Still not
convinced, use our second opinion service to help you figure out what it takes to get your business
hauling HAZMAT in compliance with the regulations. For periodic papers on hauling HAZMAT, Visit
the web site www.dgsms.ca or subscribe to it by sending and email to [email protected] with the
subject – Register me for the white papers and your contact details in the body.
Wishing all the drivers who keep our economy on the move, Safe trucking!
www.dgsms.ca | [email protected] | Phone : 1-(888)-409-8057
DANGER
TM
SafetyManagementSolutions
About the author:
George has been involved in the automation of regulatory systems since 1995 and has
pioneered digital driver’s licence and passport systems. His team which includes compli-
ance experts who have been involved in the shipping of HAZMAT for almost two decades,
Chemists with Ph.D.’s and a team of highly skilled computer engineers. The focus is to
enable the safe transportation of HAZMAT for the security of the population, the environ-
ment and those that transport it.
For more white papers
“A rose by any other name is still a rose” wrote Shakespeare, by the same token for a
trucker, a load is still a load whether it is HAZMAT or normal goods. Realistically speaking, most
companies shipping goods by trucks, do not just ship HAZMAT. In all probability the HAZMAT seg-
ment averages about 10% of the goods that are hauled on the highways around the world. Compa-
nies prefer to hire trucking services from companies that haul both HAZMAT and Non-HAZMAT
loads. If an independent trucker or a trucking company does not haul HAZMAT, it is very unlikely that
they will be identified as a preferred trucking operator, eliminating the potential of business.
After talking to many drivers and companies across the United States and Canada, the chorus
that was repeated most often was that they were overwhelmed by the intricacies of the regulations
that govern the transport of HAZMAT. Many a driver has complained of getting expensive violations
that have resulted in a loss of revenue and hours spent in the legal system trying to prove that the
violation was incorrectly issued.
When stopped at weigh stations for inspections, HAZMAT loads can cause delays of an hour or
more while the officer determines whether the loads are compliant to the regulations. Bottom line,
when a driver is rolling with a laden trailer, they are earning money. Violations and inspection delays
cut deep into income and profitability.
Now that the problem is clear – what does a trucker or a trucking company have to do to haul
HAZMAT and have a positive experience both financially and operationally?
The answer to this question is the judicious use of cutting edge tools to assist the company
and the driver to ensure 100% compliance to the regulations. Cellular data service and Wi-Fi have
been key enablers for application developers to create the tools that are intuitive for the workforce
that are used to the traditional tools of the trade. Use of these tools are vital for the trucking organi-
zation to validate the loads they are hauling are compliant to the transportation regulations.
At an inspection station, when an inspector sees placarding for HAZMAT, more often than not,
they will ask to see the manifests for the load. The driver promptly presents the officer a sheaf of
papers – many of which unfortunately are barely legible. Officers are human – so here is the first
important rule - Ensure the paperwork carried is legible.
If the loads on the truck all belong to the same class, the inspections are painless for both the
driver and the inspector. If the paperwork is correct, and the trailer looks normal, the inspection will
be short and painless. If the loads belong to multiple classes, now the inspector has to evaluate
whether or not the segregation and placarding rules have been applied correctly. The trigger for the
officer to inspect the paperwork closely starts with the shipping document. If it does not have the UN number, Proper Shipping Name, Packing Group, Net Quantity of HAZMAT and packing listed in sequence, it is a red light. Tools such as DGSMSTM, a web based
application, when used by a Consolidating facility generates a summary manifest which lists each of
the loads correctly and the placarding that is required tells the inspector that the truck being inspect-
ed has gone the extra distance to ensure compliance. Companies using DGSMS have seen their
average inspection times for HAZMAT drop to less than 5 minutes and have not had a placarding
infraction.
The input to any system is the declaration, and a very large percentage does not meet the
requirements laid out by the regulations. So how does a trucking company get the shipper to issue correct documentation? Refusing the load is not the answer as it will just black list
them. The answer is to give them a copy of DGDOXTM which is free for the first year. The trucking
company’s logo is listed as the sponsoring company on the declaration which is great advertising.
The system requires no IT support and works on web – so any web browser on a PC, laptop, or ipad
works just fine. Declarations generated by the system are accurate and repeatable. When a driver
sees a DGDOXTM declaration, they can be confident, that the paper work will pass the inspectors
scrutiny.
Given this is in place, it now become the driver’s responsibility to ensure the loads are complaint. How does a driver who loves the road and has little interest in regulations achieve
this? The answer is DGMobiTM, an android application into which the driver inputs the UN number
listed in the declaration, the driver can verify that the Proper shipping name matches the documenta-
tion, and then enters the number of packages, the net HAZMAT weight. The application then displays
the placarding required based on the cumulative load on the truck. If loads are incompatible because
of segregation rules, the driver is advised not to accept the load. Based on the cumulative loads, a 1
gallon can of paint can trigger the display of a placard. A low cost application – helps the driver stay
compliant when picking up the loads from a facility. At an inspection the electronic summary in many
instances satisfies an inspector. In addition the application also carries the ERG – which also com-
plies with the regulation that requires that the ERG be at arm’s length in the cab.
Now that the paper work is compliant, the loads are properly placarded; the driver has two more
responsibilities. The first being to check the loads are in good shape, inspect drums to see that they
are not corroded, the packages are not split, or leaking and most important have the certification
stamp. Unless the declaration states that the loads are exempt from certified pack-aging, it is mandatory to have the certification stamp and the primary and second-ary class labels (if it applies) on every package and on the four sides of an over-pack. The last step is to correctly block and brace the loads. Hauling HAZMAT requires the
extra attention that the loads are properly blocked and braced. This step can save a driver’s life and
the life of others in a collision, or roll-over. As soon as the doors are opened and the inspector sees
the loads properly blocked and braced, the over packs are marked correctly, it will give them the
confidence that the loads are being transported as per regulations.
As a tribute to the inspectors, who work in rain, shine and snow, the compliance software is
available at no charge. Inspectors with a government email address can register and use it for free.
The DOT 49 CFR compliant service is available at [email protected], the Canadian TDG
compliant service is available at [email protected]
After reading this article, the author hopes to inspire drivers and companies to haul HAZMAT
profitably and with the knowledge that it can be done safely and with relative ease. Still not
convinced, use our second opinion service to help you figure out what it takes to get your business
hauling HAZMAT in compliance with the regulations. For periodic papers on hauling HAZMAT, Visit
the web site www.dgsms.ca or subscribe to it by sending and email to [email protected] with the
subject – Register me for the white papers and your contact details in the body.
Wishing all the drivers who keep our economy on the move, Safe trucking!
DANGER
TM
SafetyManagementSolutions
About the author:
George has been involved in the automation of regulatory systems since 1995 and has
pioneered digital driver’s licence and passport systems. His team which includes compli-
ance experts who have been involved in the shipping of HAZMAT for almost two decades,
Chemists with Ph.D.’s and a team of highly skilled computer engineers. The focus is to
enable the safe transportation of HAZMAT for the security of the population, the environ-
ment and those that transport it.
For more white papers
www.dgsms.ca | [email protected] | Phone : 1-(888)-409-8057
“A rose by any other name is still a rose” wrote Shakespeare, by the same token for a
trucker, a load is still a load whether it is HAZMAT or normal goods. Realistically speaking, most
companies shipping goods by trucks, do not just ship HAZMAT. In all probability the HAZMAT seg-
ment averages about 10% of the goods that are hauled on the highways around the world. Compa-
nies prefer to hire trucking services from companies that haul both HAZMAT and Non-HAZMAT
loads. If an independent trucker or a trucking company does not haul HAZMAT, it is very unlikely that
they will be identified as a preferred trucking operator, eliminating the potential of business.
After talking to many drivers and companies across the United States and Canada, the chorus
that was repeated most often was that they were overwhelmed by the intricacies of the regulations
that govern the transport of HAZMAT. Many a driver has complained of getting expensive violations
that have resulted in a loss of revenue and hours spent in the legal system trying to prove that the
violation was incorrectly issued.
When stopped at weigh stations for inspections, HAZMAT loads can cause delays of an hour or
more while the officer determines whether the loads are compliant to the regulations. Bottom line,
when a driver is rolling with a laden trailer, they are earning money. Violations and inspection delays
cut deep into income and profitability.
Now that the problem is clear – what does a trucker or a trucking company have to do to haul
HAZMAT and have a positive experience both financially and operationally?
The answer to this question is the judicious use of cutting edge tools to assist the company
and the driver to ensure 100% compliance to the regulations. Cellular data service and Wi-Fi have
been key enablers for application developers to create the tools that are intuitive for the workforce
that are used to the traditional tools of the trade. Use of these tools are vital for the trucking organi-
zation to validate the loads they are hauling are compliant to the transportation regulations.
At an inspection station, when an inspector sees placarding for HAZMAT, more often than not,
they will ask to see the manifests for the load. The driver promptly presents the officer a sheaf of
papers – many of which unfortunately are barely legible. Officers are human – so here is the first
important rule - Ensure the paperwork carried is legible.
If the loads on the truck all belong to the same class, the inspections are painless for both the
driver and the inspector. If the paperwork is correct, and the trailer looks normal, the inspection will
be short and painless. If the loads belong to multiple classes, now the inspector has to evaluate
whether or not the segregation and placarding rules have been applied correctly. The trigger for the
officer to inspect the paperwork closely starts with the shipping document. If it does not have the UN number, Proper Shipping Name, Packing Group, Net Quantity of HAZMAT and packing listed in sequence, it is a red light. Tools such as DGSMSTM, a web based
application, when used by a Consolidating facility generates a summary manifest which lists each of
the loads correctly and the placarding that is required tells the inspector that the truck being inspect-
ed has gone the extra distance to ensure compliance. Companies using DGSMS have seen their
average inspection times for HAZMAT drop to less than 5 minutes and have not had a placarding
infraction.
The input to any system is the declaration, and a very large percentage does not meet the
requirements laid out by the regulations. So how does a trucking company get the shipper to issue correct documentation? Refusing the load is not the answer as it will just black list
them. The answer is to give them a copy of DGDOXTM which is free for the first year. The trucking
company’s logo is listed as the sponsoring company on the declaration which is great advertising.
The system requires no IT support and works on web – so any web browser on a PC, laptop, or ipad
works just fine. Declarations generated by the system are accurate and repeatable. When a driver
sees a DGDOXTM declaration, they can be confident, that the paper work will pass the inspectors
scrutiny.
Given this is in place, it now become the driver’s responsibility to ensure the loads are complaint. How does a driver who loves the road and has little interest in regulations achieve
this? The answer is DGMobiTM, an android application into which the driver inputs the UN number
listed in the declaration, the driver can verify that the Proper shipping name matches the documenta-
tion, and then enters the number of packages, the net HAZMAT weight. The application then displays
the placarding required based on the cumulative load on the truck. If loads are incompatible because
of segregation rules, the driver is advised not to accept the load. Based on the cumulative loads, a 1
gallon can of paint can trigger the display of a placard. A low cost application – helps the driver stay
compliant when picking up the loads from a facility. At an inspection the electronic summary in many
instances satisfies an inspector. In addition the application also carries the ERG – which also com-
plies with the regulation that requires that the ERG be at arm’s length in the cab.
Now that the paper work is compliant, the loads are properly placarded; the driver has two more
responsibilities. The first being to check the loads are in good shape, inspect drums to see that they
are not corroded, the packages are not split, or leaking and most important have the certification
stamp. Unless the declaration states that the loads are exempt from certified pack-aging, it is mandatory to have the certification stamp and the primary and second-ary class labels (if it applies) on every package and on the four sides of an over-pack. The last step is to correctly block and brace the loads. Hauling HAZMAT requires the
extra attention that the loads are properly blocked and braced. This step can save a driver’s life and
the life of others in a collision, or roll-over. As soon as the doors are opened and the inspector sees
the loads properly blocked and braced, the over packs are marked correctly, it will give them the
confidence that the loads are being transported as per regulations.
As a tribute to the inspectors, who work in rain, shine and snow, the compliance software is
available at no charge. Inspectors with a government email address can register and use it for free.
The DOT 49 CFR compliant service is available at [email protected], the Canadian TDG
compliant service is available at [email protected]
After reading this article, the author hopes to inspire drivers and companies to haul HAZMAT
profitably and with the knowledge that it can be done safely and with relative ease. Still not
convinced, use our second opinion service to help you figure out what it takes to get your business
hauling HAZMAT in compliance with the regulations. For periodic papers on hauling HAZMAT, Visit
the web site www.dgsms.ca or subscribe to it by sending and email to [email protected] with the
subject – Register me for the white papers and your contact details in the body.
Wishing all the drivers who keep our economy on the move, Safe trucking!
About the author:
George has been involved in the automation of regulatory systems since 1995 and has
pioneered digital driver’s licence and passport systems. His team which includes compli-
ance experts who have been involved in the shipping of HAZMAT for almost two decades,
Chemists with Ph.D.’s and a team of highly skilled computer engineers. The focus is to
enable the safe transportation of HAZMAT for the security of the population, the environ-
ment and those that transport it.
For more white papers
DANGER
TM
SafetyManagementSolutions
www.dgsms.ca | [email protected] | Phone : 1-(888)-409-8057