truck specification

50
TRUCKS CIFA_TS_GB_0711_rev04 SPECIFICATION

Upload: cesararevalojrander

Post on 14-Apr-2015

146 views

Category:

Documents


12 download

TRANSCRIPT

Page 1: Truck Specification

TRUCKS

CIFA_TS_GB_0711_rev04

SPECIFICATION

Page 2: Truck Specification

TRUCKS SPECIFICATION

Page intentionally left empty

Page 3: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

INFO FOR ALL TRUCKS

All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command.

The trucks delivered to CIFA must have the features listed in this manual.

Important

The trucks must respect the manufactures specification depending on the desti-nation country and type of equipment installed.

TRUCKS SPECIFICATION

Page 4: Truck Specification

TRUCKS SPECIFICATION

Page intentionally left empty

Page 5: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

ASTRAq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Astra HD 8 4x2 4200 8000 12000 K20L 18000

Astra HD 8 4x2 4600 8000 12000 KZR24 18000

Astra HD 8 6x4 3500/3800 + 1350 8000 19000 KZR24 26000Astra HD 8 6x4 4100+1350 8000 19000 K2 26000Astra HD 8 6x4 4100+1350 8000 19000 K31L 26000Astra HD 8 6x4 4100+1350 8000 19000 K35L 26000Astra HD 8 6x4 4500+1350 8000 26000 K36* 33000

Astra HD 8 6x4 4500+1450 8000 26000 K38L* 33000

* Only for area extra CE

Astra HD 8 8x4 1900+2350+1450 8000+8000 19000 K31L 32000

Astra HD 8 8x4 1900+2350+1450 8000+8000 19000 K36 32000

Astra HD 8 8x4 1900+2350+1450 8000+8000 19000 K35L 32000

Astra HD 8 8x4 1900+2850+1450 8000+8000 19000 K38L 32000

Astra HD 8 8x4 1900+2600/2850+1450 8000+8000 19000 K41L 32000

Astra HD 8 8x4 1900+4100+1450 9000+9000 32000 K48 * 48000

Astra HD 8 8x4 1900+4100+1450 9000+9000 32000 K52L* 48000

Astra HD 8 10x4 1900+4100+1450+1400 9000+9000 32000+12000 K58L * 54000

* Consider for K48 - K52L - K58L you need road permission

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 6: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q P.T.O. SPECIFICATIONSPTO Model

Model PAENGINE PTO GEAR BOX PTO

Version PA with PTO Multipower rapp.1,29 flange din120 ZF NH1-C rapp.0,91/1,09Version PA HPG with PTO NMV rapp.1,55 IVECO code CCM 10819 ZF NH1-C rapp.0,91/1,09

q CHASSIS SPECIFICATIONS- Short Cabin- 2 flashing light on the top of the cabin- Acustic Horne on truck reverse motion- Cable eletric for PTO (Astra code 029)- Not possible OMSI with electronic gear box

ASTRA

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 7: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

IVECOq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Euro cargo. 4x2 4185 7500 12000 K20L 18000

Trakker 4x2 4200 7500 12000 K20L 18000

Trakker 4x2 4500 8000 12000 KZR24 18000

Trakker 6x4 3500/3820+1380 8000 19000 KZR24 26000Trakker 6x4 4200+1380 8000 19000 K2 26000Trakker 6x4 4200+1380 8000 19000 K31L 26000Trakker 6x4 4200+1380 8000 19000 K35L 26000Trakker 6x4 4500+1380 8000 19000 K36 26000Trakker 6x4 4500+1380 8000 26000 K38L * 33000

* Only for area extra CE

Trakker 8x4 1875+2375+1380 8000+8000 19000 K31L 32000

Trakker 8x4 1875+2375+1380 8000+8000 19000 K36 32000

Trakker 8x4 1875+2375+1380 8000+8000 19000 K35L 32000

Trakker 8x4 1875+2875+1380 8000+8000 19000 K38L 32000

Trakker 8x4 1875+2875+1380 8000+8000 19000 K41L 32000

Trakker 8x4 1875+3945+1380 9000+9000 26000 K48 * 44000

Trakker 8x4 1875+3945+1380 9000+9000 26000 K52L * 44000

Trakker 10x4 1875+3145+1380+1400 9000+9000 26000+10000 K52L * 54000Trakker 10x4 1875+4125+1380+1400 9000+9000 26000+12000 K58L * 54000

* Consider for K48 - K52L - K58L you need road permission

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 8: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q P.T.O. SPECIFICATIONSPTO Model

Model PAENGINE PTO GEAR BOX PTO

Version PA with PTO Multipower rapp.1,29 flange din120 ZF NH1-C rapp.0,91/1,09Version PA HPG with PTO NMV rapp.1,55 IVECO code CCM 10819 ZF NH1-C rapp.0,91/1,09

q CHASSIS SPECIFICATIONS- Short Cabin- 2 flashing light on the top of the cabin- Acustic Horne on truck reverse motion- Not possible OMSI with electronic gear box- For chassis 4 and 5 axle we ask for low silence behind 2°axle

IVECO

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 9: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

MERCEDESq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Actros 4x2 4200 7500 12000 K20L 18000

Actros 4x2 4500 7500 12000 KZR 24 18000

Actros 6x4 3600/3900+1350 7500 19000 KZR 24 26000Actros 6x4 4200+1350 7500 19000 K2 26000Actros 6x4 4200+1350 7500 19000 K31L 26000Actros 6x4 4200+1350 7500 19000 K35L 26000Actros 6x4 4500+1350 7500 19000 K36 26000Actros 6x4 4500+1350 7500 26000 K38L* 33000

* Only for area extra CE

Actros 8x4 1700+2500+1350 7500+7500 19000 K35L 32000

Actros 8x4 1700+2500+1350 7500+7500 19000 K31L 32000

Actros 8x4 1700+2800+1350 7500+7500 19000 K38L 32000

Actros 8x4 1700+2800/3200+1350 8000+8000 19000 K41L 32000

Actros 32.44 8x4 1700+3700+1350 8000+8000 19000 K45H 32000

Actros 8x4 1700+4200/4400+1350 9000+9000 26000 K48 * 44000

Actros 8x4 1700+4200+1350 9000+9000 26000 K52L * 44000

Actros 10x4 1700+2800+1350+1450 9000+9000 26000+9000 K52L * 54000Actros 10x4 2020+3980+1350+1350 9000+9000 26000+12000 K58L * 54000

* Consider for K48 - K52L - K58L you need road permission.

Note for K45H: in order to allow a total weight < 32 ton the truck chessis shall weight less than 10.5 ton.

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 10: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q P.T.O. SPECIFICATIONSPTO Model

Model PAENGINE PTO GEAR BOX PTO

Version PA with PTO PTO NMV 200 Cod. M.B. N 56 rapp.1,48 flange Din 120

Gear box PTO Cod. M.B. NH2

q CHASSIS SPECIFICATIONS- Short Cabin - Engine Air filter MB code M97- 2 flashing light on the top of the cabin - Controller PSM MB code EM8 EM9- Acustic Horne on truck reverse motion - Not possible OMSI with electronic gear box- For HPG pumping Unit engine power 450 Hp - For K20L min engine power 280 Hp- Silence type MB code KKH7 (after 2° axle) NO Vertical

MERCEDES

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 11: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

MANq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Man TGS 4x2 4200 7100 11500 K20L 18000

Man TGS 4x2 4500 7500 12000 KZR24 18000

Man TGS 6x4 3600/3900+1400 7500 19000 KZR24 26000Man TGS 6x4 4200+1400 7500 19000 K35 26000Man TGS 6x4 4200+1400 7500 19000 K2X 26000Man TGS 6x4 4200+1400 7500 19000 K31L 26000Man TGS 6x4 4200+1400 7500 19000 K35L 26000Man TGS 6x4 4500+1400 7500 19000 K36 26000Man TGS 6x4 4500+1400 7500 26000 K38L* 33000

* Only for area extra CE

Man TGS 8x4 1795+2505+1400 7500+7500 19000 K31L 32000

Man TGS 8x4 1795+2505+1400 7500+7500 19000 K35L 32000

Man TGS 8x4 1795+2980+1400 7500+7500 19000 K38L 32000

Man TGS 8x4 1795+2980/3205+1400 8000+8000 19000 K41L 32000

Man TGS 32.440 BB 1795+3505+1400 8000+8000 19000 K45H 32000

Man TGS 8x4 1795+4105+1400 9000+9000 26000 K48 * 42000

Man TGS 8x4 1795+4105+1400 9000+9000 26000 K52L * 44000

* Consider for K48 - K52L you need road permission

Note for K45H: in order to allow a total weight < 32 ton the truck chessis shall weight less than 10.5 ton.

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 12: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q P.T.O. SPECIFICATIONSPTO Model

Model PAENGINE PTO GEAR BOX PTO

Version PA with PTO NMV 221 rapp.1,55 MAN code 125CMM

ZF NH1-C rapp.0,91/1,09 MAN code 122QHM

q CHASSIS SPECIFICATIONS- Short Cabin - Lowered bellows on last axle MAN code ZW003M

KSW262CN- 2 flashing light on the top of the cabin - ECU KSM - MAN code 203ER- Acustic Horne on truck reverse motion - Engine start-stop external control MAN code 280HLM- Silence to shift between 2/3 axle - NO vertical - Integral air filter Cod.MAN 201AR- Not possible OMSI with electronic gear box

MAN

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 13: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

RENAULTq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Midlum 4x2 4100 6300 10900 K20L 18000

Kerax 4x2 4500 7500 12000 KZR24 18000

Kerax 6x4 3495/3845+1375 7500 19000 KZR24 26000Kerax 6x4 4195+1375 7500 19000 K2 26000Kerax 6x4 4195+1375 7500 19000 K31 26000Kerax 6x4 4195+1375 7500 19000 K35L 26000Kerax 6x4 4495+1375 7500 19000 K36 26000

Kerax 8x4 2040+2305+1370 7500+7500 19000 K36 32000

Kerax 8x4 2040+2305+1370 7500+7500 19000 K35L 32000

Kerax 8x4 2040+2305+1370 7500+7500 19000 K31L 32000

Kerax 8x4 2040+3005+1370 7500+7500 19000 K38L 32000

Kerax 8x4 2040+2455/3005+1370 8000+8000 19000 K41L 32000

Kerax 8x4 2040+3955+1370 9000+9000 26000 K48 * 44000

Kerax 8x4 2040+3955+1370 9000+9000 26000 K52L * 44000

* Consider for K48 - K52L you need road permission

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 14: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q P.T.O. SPECIFICATIONSPTO Model

Model PAENGINE PTO GEAR BOX PTO

Version PA with PTO NMV 221 rapp.1,55 flange Din 150 PTO ZF 81Z1C rapp.0,92/1,09

q CHASSIS SPECIFICATIONS- Short Cabin- 2 flashing light on the top of the cabin- Acustic Horne on truck reverse motion

- ECU BBM Predisposition for bodybilding- Not possible OMSI with electronic gear box- Modification Air filter and silence behind 2°axle.Note see: “info product” see body builder info-predisposition movement SCR and Air filter on www.Renault-truck.com

RENAULT

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 15: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

DAFq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Daf CF 4x2 4200 7500 11500 K20L 18000

Daf CF 4x2 4500 7500 12000 KZR24 18000

Daf CF 6x4 3850+1400 7500 19000 KZR24 26000Daf CF 6x4 4300+1400 7500 19000 K2X 26000Daf CF 6x4 4300+1400 7500 19000 K31L 26000Daf CF 6x4 4300+1400 7500 19000 K35L 26000Daf CF 6x4 4850+1400 7500 19000 K36 26000

Daf CF 8x4 2050+2300+1400 7500+7500 19000 K31L 32000

Daf CF 8x4 2050+2300+1400 7500+7500 19000 K36 32000

Daf CF 8x4 2050+2300+1400 7500+7500 19000 K35L 32000

Daf CF 8x4 2050+2850+1400 7500+7500 19000 K38L 32000

Daf CF 8x4 2050+2550/2950+1400 8000+8000 19000 K41L 32000

Daf CF 8x4 2050+4100+1400 9000+9000 26000 K48 * 44000

Daf CF 8x4 2050+4100+1400 9000+9000 26000 K52L* 44000

* Consider for K48 - K52L you need road permission

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 16: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

DAFq P.T.O. SPECIFICATIONS

PTO Model

Model PAENGINE PTO GEAR BOX PTO

Version PA with PTO Engine PTO rapp.1,20 flange DIN 120 ZF NH1-C rapp.0,91/1,09Version PA HPG with PTO NMV 221 rapp.1,55 flange 150 ZF NH1-C rapp.0,91/1,09

q CHASSIS SPECIFICATIONS- Short Cabin - Air filter integrated on the cabin- 2 flashing light on the top of the cabin - Not possible OMSI with electronic gear box- Acustic Horne on truck reverse motion- Modification silence behind 2°axle- ECU BBM + software for external control engine

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 17: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

VOLVOq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA Technical

weight Kg

Volvo FLH4x2 4100 7100 11500 K20L 18000

Volvo FM4x2 4600 7500 12000 KZR24 18000

Volvo FM 6x4 3500/3900+1370 7500 19000 KZR24 26000Volvo FM 6x4 4300+1370 7500 19000 K2 26000Volvo FM 6x4 4300+1370 7500 19000 K31L 26000Volvo FM 6x4 4300+1370 7500 19000 K35L 26000Volvo FM 6x4 4600+1370 7500 19000 K36 26000

Volvo FM8x4 1995+2305+1370 7500+7500 19000 K31L 32000

Volvo FM8x4 1995+2305+1370 7500+7500 19000 K36 32000

Volvo FM8x4 1995+2305+1370 7500+7500 19000 K35L 32000

Volvo FM8x4 1995+2605+1370 7500+7500 19000 K38L 32000

Volvo FM8x4 1995+2605/2905+1370 8000+8000 19000 K41L 32000

Volvo FM8x4 1995+4105+1370 9000+9000 26000 K48 * 44000

Volvo FM8x4 1995+4105+1370 9000+9000 32000 K52L* 44000

Volvo FM10x4 1995+4005+1370+1400 9000+9000 32000+10000 K58L* 54000

* Consider for K48 - K52L - K58L you need road permission The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

Page 18: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q P.T.O. SPECIFICATIONSPTO Model

Model PAENGINE PTO GEAR BOX PTO

Note: Truck configuration only with coupler OMSI

q CHASSIS SPECIFICATIONS- Short Cabin - Air filter integrated on the cabin- 2 flashing light on the top of the cabin - Not possible OMSI with electronic gear box- Acustic Horne on truck reverse motion- ECU BBM Predisposition for bodybilding- For chassis 4 and 5 axle we ask for low silence behind 2°axle

VOLVO

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 19: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

q TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg mod.PA

Technical weight

Kg

Serie P/R 4x2 4100 7100 11500 K20L 18000

Serie P/R 4x2 4500 7500 12000 KZR24 18000

Serie P/R 6x4 3500/3900+1445 7500 19000 KZR24 26000Serie P/R 6x4 4100+1445 7500 19000 K2 26000Serie P/R 6x4 4100+1445 7500 19000 K31L 26000Serie P/R 6x4 4100+1445 7500 19000 K35L 26000Serie P/R 6x4 4500+1445 7500 19000 K36 26000

Serie P/R 8x4 1940+2160+1445 7500+7500 19000 K36 32000

Serie P/R 8x4 1940+2160+1445 7500+7500 19000 K35L 32000

Serie P/R 8x4 1940+2160+1445 7500+7500 19000 K31L 32000

Serie P/R 8x4 1940+2960+1445 7500+7500 19000 K38L 32000

Serie P/R 8x4 1940+2560/2960+1445 8000+8000 19000 K41L 32000

Serie P/R 8x4 1940+3960/4160+1445 9000+9000 26000 K48 * 44000

Serie P/R 8x4 1940+3960/4160+1445 9000+9000 32000 K52L * 44000

Serie P/R 10x4 1940+2560+1445+1305 9000+9000 30000+9000 K52L* 54000Serie CB 10x4 1940+4160+1445+1305 9000+9000 30000+9000 K58L* 54000

* Consider for K48 - K52L - K58L you need road permission

The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.

SCANIA

Page 20: Truck Specification

TRUCK-MOUNTED CONCRETE PUMP

SCANIAq P.T.O. SPECIFICATIONS

PTO Model

Model PAENGINE PTO GEAR BOX PTO

Note: Truck configuration only with coupler OMSI

q CHASSIS SPECIFICATIONS- Short Cabin-CP14 - Air filter integrated on the cabin- 2 flashing light on the top of the cabin - program system for central unit SOPS fonic wheel 6 teeth- Acustic Horne on truck reverse motion - ECU BWS Predisposition for bodybilder- Not possible OMSI with electronic gear box- For chassis 4 and 5 axle we ask for low silence behind 2°axle

q ENGINE POWERPumping Unit Model Min.Engine Power truck (Hp)PA 709 F8 K20L 280PA 907 F8 KZR24-KZ26-K2X 240PA 1506/909 F8 K31L-K2X-K35L-K36-K38L-K41L-K48-K52L 380PA 1408 IF9 EPC K31L-K35L-K36-K38L-K41L-K45H 440

HPG 1808/1113 IF9K41L-K48-K52L 440K58L- 480

Page 21: Truck Specification

MAGNUM

INFO FOR ALL TRUCKS

All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command.

The trucks delivered to CIFA must have the features listed in this manual.

All veicols with festures different from the following specification should cause delay on delivery and the charge for the modification needed.

Important

The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.

TRUCKS SPECIFICATION

Page 22: Truck Specification

TRUCKS SPECIFICATION

Page intentionally left empty

Page 23: Truck Specification

MAGNUM

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight Kg

HD8 - 6x4 3500+1450 8000 13000+13000 80MK24 33000

HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 80MK20 40000

HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 80MK24 40000

HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 80MK28L 40000

HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 115MK24 40000

HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 115MK28L 40000

HD8 - 8x4 1900+2350+1450 8000+8000 13000+13000 115MK32L 40000

ASTRA

Page 24: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINE MOTOR

MULTIPOWERratio 1-1.29 900Nm FLANGE DIN 120-8 holes

ZF.N221/10 rapp.1.36-1.62FLANGE DIN 100-6 Holes andNL/1-C ratio 0.91-1.09 overturned version low direction on the right.

ZF NH1-C ratio 0.91-1.09

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

q CHASSIS SPECIFICATIONS- SHORT CABIN - ELECTRIC CABLE PTO (Astra code 029)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- ACUSTIC HORNE ON TRUCK REVERSE MOTION- PREDISPOSITION LATERAL MARKER LIGTH

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

ASTRA

Page 25: Truck Specification

MAGNUM

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg mod.MA Technical

weight Kg

TRAKKER 6x4 3500+13803820+1380 8000 13000+13000 80MK24 33000

TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 80MK20 41000

TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 80MK24 41000

TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 80MK28L 41000

TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 115MK24 41000

TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 115MK28L 41000

TRAKKER 8x4 1875+2375+1380 8000+8000 13000+13000 115MK32L 41000

IVECO

Page 26: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSPTO Model

Model Magnum

ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINEMOTOR

MULTIPOWERratio 1-1.29flange DIN 120-8 holes900Nm

ZF.N221/10 ratio 1.36-1.62flange DIN 100-6 holes andNL/1-C ratio 0.91-1.09 overturned version low direction on the right.

ZF NH1-C ratio 0.91-1.09

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

IVECO

q CHASSIS SPECIFICATIONS- SHORT CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- LOW VERSION SILENCER 2°/3° AXLE (no Vertical)- PREDISPOSITION LATERAL MARKER LIGTH

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 27: Truck Specification

MAGNUM

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight Kg

ACTROS 6x4 3600+1350 8000 13000+13000 80MK24 33000

ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 80MK20 41000

ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 80MK24 41000

ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 80MK28L 41000

ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 115MK24 41000

ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 115MK28L 41000

ACTROS 8x4 1700+2500+13501700+2800+1350 8000+8000 13000+13000 115MK32L 41000

MERCEDES

Page 28: Truck Specification

MAGNUM

q CHASSIS SPECIFICATIONS- ELASTIC JOINT MB Type N54 - PSM ELECTRONIC GEARBOX (MB code EM 8/9)

- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - PTO version: Movement AD BLU CENTRAL (See Note*)

- ACUSTIC HORNE ON TRUCK REVERSE MOTION - ENGINE AIR FILTER (MB code M97)

- PREDISPOSITION LATERAL MARKER LIGTH - GEAR BOX PTO DOUBLE WITH FLANGE IN HIGH- SHORT CABIN: VERTICAL EXHAUST SILENCE (MB code K68)

- MEDIUM CABIN: EXHAUST SILENCE (2°-3° AXLE) MB code KKH7 - Only 80 MK Model

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINEMOTORMB-N52-1,15

Flange:DIN 100 6 holes-600Nm

MB-N56-1,48Flange: DIN 120 8 holes-1500Nm

MB-ND7-1,36/1,62 MB-NH2C 1,07/1,29

RH PTO PB607L-GPT405 l l

RH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

Note * -Movement AD BLU 600 mm towards rear

MERCEDES

Page 29: Truck Specification

MAGNUM

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg modell Technical

weight Kg

TGS 6x4 3600+14003900+1400 8000 13000+13000 80MK24 33000

TGS 8x4 1795+2505+1400 8000+8000 13000+13000 80MK20 41000

TGS 8x4 1795+2505+1400 8000+8000 13000+13000 80MK24 41000

TGS 8x4 1795+2505+1400 8000+8000 13000+13000 80MK28L 41000

TGS 8x4 1795+2505+1400 8000+8000 13000+13000 115MK24 41000

TGS 8x4 1795+2505+1400 8000+8000 13000+13000 115MK28L 41000

TGS 8x4 1795+2505+1400 8000+8000 13000+13000 115MK32L 41000

MAN

Page 30: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE ENGINE

MOTORPTO MAN Cod. 120KHratio 1,23 - 870Nm

ZF 221/10B -R. 1,35/1,62 flange 100 -6 holes. Cod. MAN 122 IP + ZF NL1C cod. MAN 122 OV

ZF NH1C MAN code 122 QHM

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

q CHASSIS SPECIFICATIONS- SHORT CABIN START/STOP ESTERNAL CONTROL (Code 280 HLM)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - SILENCER TO SHIFT BETWEEN 2nd and 3rd AXLE

(See drawing)- ACUSTIC HORNE ON TRUCK REVERSE MOTION - ENGINE AIR FILTER (Code 201 ASS)- PREDISPOSITION LATERAL MARKER LIGTH GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- LOWERED BELLOWS ON 4th AXLE (Code KSW 262 CN)- KSM ELECTRONIC GEARBOX (code 203 ER)

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

MAN

Page 31: Truck Specification

MAGNUM

RENAULTq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg model Technical

weight Kg

KERAX 6x4 3495 + 13703845 + 1370 8000 13000+13000 80MK24 33000

KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 80MK20 41000

KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 80MK24 41000

KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 80MK28L 41000

KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 115MK24 41000

KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 115MK28L 41000

KERAX 8x4 2040+2305+13702040+2455+1370 8000+8000 13000+13000 115MK32L 41000

Page 32: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINEMOTOR

PAM 100 ratio 1-1,08 flange DIN1006 holes 800Nm

ZF 221/10B ratio 1,35/1,62Flange 100 6 holes + 81Z2-C ratio 0,77/0,92 overturned version low direction on the right.

81Z1C - Ratio 0.92-1.09

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW- ACUSTIC HORNE ON TRUCK REVERSE MOTION- PREDISPOSITION LATERAL MARKER LIGTH- MODIFY EXHAUST SYSTEM AFTER 2nd AXLE AND ENGINE AIR FILTER (See Note “ MOVEMENT PREDISPOSITION SCR AND ENGINE AIR FILTER” ON WEB SITE - www.Renault-truck.com)

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

RENAULT

Page 33: Truck Specification

MAGNUM

DAF

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight Kg

CF 85 FAT 6x4 3850+1400 8000 13000+13000 80MK24 33000

CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 80MK20 41000

CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 80MK24 41000

CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 80MK28L 41000

CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 115MK24 41000

CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 115MK28L 41000

CF 85 FAD 8x4 2050+2300+1400 8000+8000 13000+13000 115MK32L 41000

Page 34: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINEMOTOR

ENGINE PTOFlange DIN 120 8 holesratio 1:1,20 800Nm

ZF N.221/10B ratio 1,36-162Flange DIN 100 6 holes + ZF NL 1C ratio 0,91-1,09 overturned version low direction on the right.

ZF NH1C ratio 0.91-1.09

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

q CHASSIS SPECIFICATIONS- SHORT CABIN - MOVEMENT EXHAUST SYSTEM AFTER 2nd AXLE

(8x4) - See Bulletin CIFA Mktg 01/2008.- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - MOVEMENT EXHAUST SYSTEM 500 mm TOWARDS

THE REAR (6x4) - See Bulletin CIFA Mktg 01/2008.- ACUSTIC HORNE ON TRUCK REVERSE MOTION ECU-BBM PREDISPOSITION FOR BODYBUILDER- PREDISPOSITION LATERAL MARKER LIGTH SOFTWARE BBM+SC FOR EXTERNAL CONTROL

ENGINE (Cod.DAF 1690720 SELCO 0797)- ENGINE AIR FILTER INTEGRATED IN THE CABIN -GEAR BOX PTO DOUBLE WITH FLANGE IN LOW

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

DAF

Page 35: Truck Specification

MAGNUM

VOLVOq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg model Technical

weight Kg

FM 6x4 3700+13703900+1370 8000 13000+13000 80MK24 33000

FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 80MK20 41000

FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 80MK24 41000

FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 80MK28L 41000

FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 115MK24 41000

FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 115MK28L 41000

FM 8x4 1995+2305+13701995+2605+1370 8000+8000 13000+13000 115MK32L 41000

Page 36: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINEMOTOR

PTER 1400 ratio 1-1,26flange SAE 1400 4 holes EPTT 650NM

PTER 1400 ratio 1-1,26flange SAE 1400 4 holesEPTT 1000Nm

PTRD D1 rapp. 1-1,30/1,62flangia SAE and enclo-sed heat exchanger

PTRD-D ratio 1.08-1.12

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

q CHASSIS SPECIFICATIONS- SHORT CABIN - 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION - FOR MODIFICATION EXHAUST SYSTEM AFTER

2nd AXLE See “SERVICE INFO” on VOLVO WEB SITE.- PREDISPOSITION LATERAL MARKER LIGTH - ENGINE AIR FILTER INTEGRATED IN THE CABIN- ECU BBM PREDISPOSITION FOR BODYBUILDER -GEAR BOX PTO DOUBLE WITH FLANGE IN HIGH

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

VOLVO

Page 37: Truck Specification

MAGNUM

SCANIAq TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg model Technical

weight Kg

SERIE P.R 6x4 3700+14453900+1445 8000 13000+13000 80MK24 33000

SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 80MK20 41000

SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 80MK24 41000

SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 80MK28L 41000

SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 115MK24 41000

SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 115MK28L 41000

SERIE P.R 8x4 1940+2360+14451940+2560+1445 8000+8000 13000+13000 115MK32L 41000

Page 38: Truck Specification

MAGNUM

q MOTORIZATION SPECIFICATIONSModel PTO

Model Magnum

ENGINE PTO GEAR BOX PTO DOUBLE

GEAR BOX PTO SINGLE

ENGINEMOTOREK 740 ratio 1:1

Flange SAE 1400 4 holes 2000Nm

EG 661 ratio 1,28:1,58Flange SAE 1400

EG 652 ratio 0,82:1,03only Gear GRS 0905

RH PTO PB607L-GPT405 l lRH OMSI PB607L lRHS PB607L lRH OMSI PB808L l l

q CHASSIS SPECIFICATIONS- SHORT CABIN CP 14 or CP 16 - MEDIUM CABIN CG 16 (Contact CIFA Technical Dep.)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - MEDIUM CABIN CR 16 (Not Available)- ACUSTIC HORNE ON TRUCK REVERSE MOTION - ENGINE AIR FILTER INTEGRATED IN THE CABIN- PREDISPOSITION LATERAL MARKER LIGTH - ECU BWS predisposition for bodybuilder- FOR MODIFICATION EXHAUST SYSTEM AND BATTERIE BOX AFTER 2nd AXLE

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

SCANIA

Page 39: Truck Specification

TRUCK MIXER

TRUCKS SPECIFICATION

INFO FOR ALL TRUCKS

All trucks equipped with an engine electrical managed must have the electro-nic control and related electric cables suitable for the external manual com-mand.

The trucks delivered to CIFA must have the features listed in this manual.

All trucks with festures different from the following specification should cause delay on delivery and the charge for the modification needed.

Important

The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.

Page 40: Truck Specification

Page intentionally left empty

Page 41: Truck Specification

TRUCK MIXER

ASTRA

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

MULTIPOWERratio 1,29 900NmFLANGE DIN 120-8 holes

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg modello Technical

weight KgHD8 - 6x4 3500+1450 8000 19000 SL7/SLA7 33000HD8 - 6x4 3500+1450 8000 26000 SL8/SLA8 33000HD8 - 6x4 3800+1450 9000 32000 SL9 40000

HD8 - 8x4 4250+1450 7500+7500 26000 SL9/SLA9 41000HD8 - 8x4 4250+1450 8000+8000 26000 SL10/SLA10 41000HD8 - 8x4 4750+1450 8000+8000 32000 SL12/SLA12 48000HD8 - 8x4 4750+1450 9000+9000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- ELECTRIC PREDISPOSITION FOR PTO CON.ASTRA 029

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 42: Truck Specification

TRUCK MIXER

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

MULTIPOWERrate 1,29 900NmFLANGE DIN 120-8 holes

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight KgTRAKKER 6x4 3500+1380 7500 19000 SL7/SLA7 33000TRAKKER 6x4 3500/3820+1380 7500 26000 SL8/SLA8 33000TRAKKER 6x4 3820+1380 9000 32000 SL9 40000

TRAKKER 8x4 4250+1380 7500+7500 26000 SL9/SLA9 41000TRAKKER 8x4 4250+1380 8000+8000 26000 SL10/SLA10 41000TRAKKER 8x4 5020+1380 8000+8000 29200 SL12 45000TRAKKER 8x4 5020+1380 8000+8000 29200 SLA12 45000TRAKKER 8x4 5020+1380 8000+8000 29200 HD12+* 45000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

IVECO

Page 43: Truck Specification

TRUCK MIXER

MERCEDES

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

PTO MB N52 rate 1,15 600NmFlange DIN 100 6 holes

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight KgAXOR ACTROS

6x4 3600+1350 7500 19000 SL7/SLA7 33000

AXOR ACTROS 6x4 3600+1350 7500 26000 SL8/SLA8 33000

ACTROS 6X4 3900+1350 9000 32000 SL9 40000

AXOR ACTROS 8x4 4200+1350 7500+7500 26000 SL9/SLA9 41000

AXOR ACTROS 8x4 4200+1350 8000+8000 26000 SL10/SLA10 41000

AXOR ACTROS 8x4 4500+1350 8000+8000 32000 SL12 48000

AXOR ACTROS 8x4 5100+1350 8000+8000 32000 SLA12 48000

AXOR ACTROS 8x4 5100+1350 9000+9000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU PSM (MB code EM8/9)- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- ELASTIC JOINT (MB code N54) Only SL Model

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 44: Truck Specification

TRUCK MIXER

MAN

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

PTO MAN COD. 120KHrate 1,23 870NmFlange DIN 100 6 holes

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight KgMAN TGS

6x4 3600+1400 7500 19000 SL7/SLA7 33000

MAN TGS6x4 3600+1400 7500 26000 SL8/SLA8 33000

MAN TGS 6X4 3900+1400 9000 32000 SL9 40000

MAN TGS8x4 4300+1400 7500+7500 26000 SL9/SLA9 41000

MAN TGS8x4 4300+1400 8000+8000 26000 SL10/SLA10 41000

MAN TGS8x4 4775+1400 8000+8000 32000 SL12/SLA12 48000

MAN TGS8x4 4775+1400 9000+9000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION- ECU KSM (MAN code 203ER)

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 45: Truck Specification

TRUCK MIXER

RENAULT

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

PTO RENAULT PAM 100 - rate 1,08 800NmFlange DIN 100

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model technical

weight KgKERAX

6x4 3495+1375 7500 19000 SL7/SLA7 33000

KERAX6x4 3495+1375 7500 26000 SL8/SLA8 33000

KERAX6x4 3850+1375 9000 32000 SL9 40000

KERAX8x4 4345+1370 7500+7500 26000 SL9/SLA9 41000

KERAX8x4 4345+1370 8000+8000 26000 SL10/SLA10 41000

KERAX8x4 4495+1370 8000+8000 32000 SL12 48000

KERAX8x4 5045+1370 8000+8000 32000 SLA12 48000

KERAX8x4 5045+1370 8000+8000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 46: Truck Specification

TRUCK MIXER

DAF

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTO

ENGINE MOTOR

ENGINE PTORatio 1. 1,2 800NmFlange DIN 120 8 holes - anticlockwise rotation

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight KgCF 6x4 3350/3850+1400 7500 19000 SL7/SLA7 33000CF 6x4 3350/3850+1400 7500 26000 SL8/SLA8 33000CF 6x4 3850+1400 9000 32000 SL9 40000

CF 8x4 4350+1400 7500+7500 26000 SL9/SLA9 41000CF 8x4 4350+1400 8000+8000 26000 SL10/SLA10 41000CF 8x4 4600+1400 8000+8000 32000 SL12 48000CF 8x4 5000+1400 8000+8000 32000 SLA12 48000CF 8x4 5000+1400 9000+9000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 47: Truck Specification

TRUCK MIXER

VOLVO

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

PTO VOLVO PTER 1400rate 1,26 Flange SAE 1400EPTT 650NM

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONSMod. Chassis WB mm Axel front

weight KgAxel rear weight Kg model Technical

weight KgFM 6x4 3400/3700+1370 7500 19000 SL7/SLA7 33000FM 6x4 3400/3700+1370 7500 26000 SL8/SLA8 33000FM 6x4 3900+1370 9000 32000 SL9 40000

FM 8x4 4300+1370 7500+7500 26000 SL9/SLA9 41000FM 8x4 4300+1370 8000+8000 26000 SL10/SLA10 41000FM 8x4 4600+1370 8000+8000 32000 SL12 48000FM 8x4 4900+1370 8000+8000 32000 SLA12 48000FM 8x4 5100+1370 9000+9000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN - ECU BBM PREDISPOSITION FOR BODYBUILDER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN- ACUSTIC HORNE ON TRUCK REVERSE MOTION

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 48: Truck Specification

TRUCK MIXER

SCANIA

q MOTORIZATION SPECIFICATIONSModel PTO

Model TRUCK MIXER

ENGINE PTOENGINE MOTOR

PTO SCANIA EK 740rate 1,1 2000NmFlange SAE 1400

SL 7/SL8/SL9/SL10/SL12 lSLA7/SLA8/SLA9/SLA10/SLA12 l

q TRUCK SPECIFICATIONS

Mod. Chassis WB mm Axel front weight Kg

Axel rear weight Kg model Technical

weight KgSERIE P/R 6x4 3500/3700+1445 7500 19000 SL7/SLA7 33000SERIE P/R 6x4 3500+1445 7500 26000 SL8 33000SERIE P/R 6x4 3700+1445 7500 26000 SLA8 33000SERIE P/R 6x4 3900+1445 9000 32000 SL9 40000

SERIE P/R 8x4 4100+1445 8000+8000 26000 SL9/SLA9 41000SERIE P/R 8x4 4300+1445 8000+8000 26000 SL10/SLA10 41000SERIE P/R 8x4 4500+1445 8000+8000 32000 SL12 48000SERIE P/R 8x4 4700+1370 8000+8000 32000 SLA12 48000SERIE P/R 8x4 4700+1370 9000+9000 32000 HD12+* 48000

* only for area extra CE

q CHASSIS SPECIFICATIONS- SHORT CABIN CP14 - FOR SLA8 AND SLA12 ONLY ORIZZONTAL SILEN-

CER- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ECU BWS PREDISPOSITION FOR BODYBUILDER

- ACUSTIC HORNE ON TRUCK REVERSE MOTION

- FOR CABIN CP16 OR CR16 TO BE VERIFIED BY CIFA TECH NICAL DEP.

The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.

Page 49: Truck Specification

TRUCKS SPECIFICATION

Page intentionally left empty

Page 50: Truck Specification

Cifa S.p.A.via Stati Uniti d’America, 26I - 20030 Senago (Milano)

tel. +39.02.99013.1fax +39.02.9981157

www.cifa.com