truck crane boom lengths: 35 to 110 ft - nesscampbell lengths: 35 to 110 ft jib lengths: 33 to 58 ft...
TRANSCRIPT
truck crane50 tonslink-belt htc-850
BOOM LENGTHS:35 to 110 ft
JIB LENGTHS:33 to 58 ft
JIB OFFSETS:5 - 17.5 - 30
NOTES:
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
t CONSTRUCTION EQUIPMENT
. ·�. Specifications (u Hydraulic Truck Crane
G INFOR TION ONLY
HTC-850 50-Ton (45.36 metric ton)
� ,v
ot tion
13'4-1/ " ____ _
------------/:���1------------------ -
---- (4.07m)
1 '11-7/ " 3 35ml
6'4" (1.93 ml
2' 1/2" 2' 1/2"
(.l/ m/ (. m/
3'5-1/2" (1. mJ
Notto Scale
General dimensions
T ilswing of ounterweight G nd
n - S nd d tires
G nd n - Op n
tires Turning r dius - S nd d tires Turning r dius - (w ll to w ll)
<outside front u er)
Notto Scale
feet meters
13' 8- /8" 4.18
.22 8-1/2"
g• .23
49' o· 14.93
55•7• 1 .94
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
P.8rstructure
Boom
link-Belt -
patented design. 35' three-section
o· - 85' o·
boom (10.67
with m two
25.91 power
m) sections. Boom
side impressions
plates have for superior
diamond strength
shaped to
MPa)
weight ratio and are offset welded to
(689.5
integrity
carefully steel
and
machined angle
strength. chords
100,000
Boom for
p.s.i. maximumtelescope
r shoes
both sections
vertically are
and supported
horizontally.by wea
Load
block visual
and warning Moment
function system Indicator
kickouts. with
-anti-two
Audio
Constof boom length and angle,
tip ant
height, display
configuration, radius of
allowed load,
load. machine
actual load
and alarms
% of for
allowed maximum
load. and
Presettableminimum
boom maximum
angles, boom
maximum length.
tip height and
(10.67 Optional
m-33.53 boom
m) - 35'
four-section O"- 110·
booO"
includes base section, two power
m
sections, and manual fourth section.
QFourth
!'.Y section
activating is power
a cylinder pinned by
locking
(0.42 Boom
m) head
root -diameter
Standard; head
Four sheaves
16-3/8"
with head
five sheaves
16-3/8" available
(0.42 m) to
root handle
diameterup to
10 Two
parts of removable
3/4" (19 wire
mm) rope
wire guards
rope. and
rope each side
dead of end
the lugs
boom are
head. provided on
Single Auxiliary
16-3/8" lifting
(0.42 sheave
m) root - Optional;
diameter head guards,
sheave mounted
with to boom. removable
For wire
use rope
withone auxiliary
or two winch.
parts of Does
line not
off affect
the optional erection
of jib multiple
or use reeving.
of main head sheaves for
Boom designed
elevation double-acting
- Two hydraulic
Link-Belt boom
hoist cylinders with integral l f
holding
ontrols for
to oot
78c
boom valves. Hand
elevation or
from optiona
-3° ° .
• Fly
Optional - 33' O" (10.06 m) stowableone-piece lattice type.
0
G£NtRAt INFORMATION ONLY
• Jib
. Optional - 25' o·
t
(7.62 5 .
m) 17.5 ,
stowable and 30
A° ° °frame.
Attaches Can
to be fly
offseonly.
• Cab and Controls
and Environmental
vibration by cab;
rubber isolated
mounts. from
All sound
tintedand maximum
tempered visibility
safety and
glass ventilation,
windows. sliding
For
right side and rear window and swing
uproof
(0.91 cylinders.
m)
window
width. Slide-by-door
supported
Six-way
with opens
adjustable
two to gas
3' o·
operator's seat. Control levers for swing,
with boom
foot telescope,
control for winch
swing and
brake boom
and hoist,
sight optional
level boom
bubble. hoist. Outrigger controls,
cab mounted gauges
instrumentation for
-hydraulic
Dash oil
oil temperature,
pressure. fuel, water temperature,
and
• Swing
Bi-directional hydraulic swing motor
for r.p.m.
mounte360°
d to a continuous
two-stage smooth
planetary swing at
reducer2.45
Swing brake - Standard; Foot
brake
mounted operated,
on spring
the speed released
reducer.disc
° Swing pin-type
lock -controlled
Standard; from the
360op
cab. Two position house lock for erator's
travel
position
and pick and carry modes.
upperstructure Counterweight -
frame. Pinned
9,000 to lb. (4 082 Jt.g)
8,050 counterweight
lb. (3 651 with
Jt.g) single-winch counterweight
system.with
two-winch
eight
system. removal
Optional system iscounterw
available.
• Hydraulic System
Main pump.
pump Combined
-pump
Three-section capacity of
gear-type185
gpm engine
(700 (1 :1
1pm). ratio) with
Powered pump
by carrier disconnect.
Pump engaged/disengaged
disconnect is a from jaw-type
carrier clutch
cab.Maximum
(203 system
Jt.glcm2). operating
Hydraulic pressure
oil
is
2,900 cooler is
p.s.i. standard.
Reservoir -capacity.
Link-Belt. Diffusers
145 gallonfor (548.83 L)
deareation.
-2-
located Filtration
inside - One
the hydraulic six-micron filter
reservoir.
Control valves
- Six ultaneous
separate operation
control of all
crane valves allow
functions.sim
• Load Holst System
Standard two-speed
-motor
Model and
2M automatic
main winch brake;
with
power up/power
down ectional
mode gear
of type
hydraulic operation.
motor.Bi-dir
with Optional-
two-speed Model
motor 2M
and auxiliary
automatic winch
brake, power up/power
l, down
gear-type mode of
hydraulic operation.
motor. Bi-directiona
,
Optional up/power
-down.
Model 3M two-speed
winch motor
with and power
Available exclusive
on controlled
main or true both
gravity winches.
freefall.
Line pulls and speeds -199
Maximum
nd line
(167.03 maximum
pull is
mlmin) line 15,870
on speed
lbs.
17" is (7
(0.43 548
m) f.p.m.Jt.g)
ro
a
diameter smooth drums. ot
• UpperstructureEquipment - Optional
Boom indicators,
hoist foot propane
control, heater,
drum diesel
rotation heater,
1/2 60-ton
ton (7.72 (54.43
metric metric
ton) ton)
ball hook
and block,
swivel,8-
roof lights,
window lifting lug
windshield package,
wiper, hand
flood throttle,
air amber
conditioning. rotating beacon,
windshield cab
washer, mounted
spotlight, monitoring system.
tachometer and engine
•
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
Carrier
.Type Link-Belt a· o· (2.44 m) wide, 22a· (5.79m) wheelbase.Standard - 8 x 4 drive
Frame - All-welded high strength alloy steel plate construction with box-type design and integral 100,000 p.s.i. (689.5MPa) steel outrigger boxes.
• OutriggersStandard - Power hydraulic, double box, dual beam outriggers, front and rear. Vertical jack cylinders, each equipped with integral holding valve. Beams extend to 20' o· (6.10 m)centerline-to-centerline and retract to within 8' o· (2.44 m) overall width. Equipped with stowable, lightweight 24 • (.61 m) diameter floats. Controls and sight level bubble located in upperstructure cab.
Front bumper outrigger- Standard; Front center vertical jack mounted under bumper with 20" (.51 m) square lightweight float. Provides 360° lifting capacities.
• Axles
Front- Tandem, 83.31" (2. 12 m) track.
Rear- Tandem, 71.8" (1.82 m) track, 6.83 to 1.0 ratio with interaxle differential lockout.
• SuspensionFront- Spring suspension with torque
rods. Rear- Solid mount 54• (1.37 m) bogie
beam.
• WheelsFront - Cast, six-spoke.
Rear - Cast, six-spoke.
Link11elt CONSTRUCTION EQUIPMENT
GENERAL INFORMATION ONLY
• Tires
Standard Front - 16.5 x 22.5 (16 PR) transport type tubeless.
Standard Rear - 11.0 x 20.0 (14 PR) transport type with tube.
Optional Front- 1aoo x 22.5 (16-PR) transport type tubeless.
Optional Rear- 12.00 x 20.0 (14 PR) transport type with tube.
Optional Front - 445/65R22.5 XZY lug type radials.
Optional Rear - 12R20 XZA transport type radials.
Optional Rear - 12R20 XZY lug type radials
• BrakesFull air on all wheels. Air dryer is
ndard.
Service
Front - 8 X 4 Cam-type 16-112" x 6" (.42 m x .15 m) shoe diameter.
Rear - Cam-type 16-1/2" x 7" (.42 m x .18 m) shoe diameter.
Parking & emergency - One spring set, air released chamber per rear axle end. Parking brake applied with valve mounted on carrier dash. Emergency brakes apply automatically when air pressure drops below 60 p.s.i. (4.14 Bars)in both systems.
• SteeringSheppard Steering, rack-and-pinion
ign. Provides wall-to-wall turning ius of 55' 7• (16.94 m).
Clutch - Lipe-Rollway 14" (0.36 m)diameter, spring loaded, double plate dry disc.
Universals - Rockwell; easy service type.
-3-
• TransmissionStandard - Fuller Roadranger RT0-6613; 13 speeds forward, 3 reverse.
• Electrical SystemTwo 12-volt batteries; 2,230 cold cranking amps available, 80 amp alternator.
Lights - Four dual-beam sealed headlights, front and rear directional signals, stop and tail lights, four-way emergency flashers, back-up lights, front, rear and side clearance lights with integral reflectors and license plate light..
• Carrier CabOne-man cab. Acoustical insulation with vinyl covering. Equipped with electric windshield wiper and washer, horn, fourway adjustable seat with seat belt, dome and dash lights, cigar lighter, ashtray, 22,400 BTU capacity heater, defroster, door and window locks, fire extinguisher, LH/RH rear view mirrors, tilt/telescoping steering wheel and sliding LH/RH and rear tinted windows.
Cab lnstNmentation - Standard; illuminated instrument panel with speedometer. odometer. tachometer. voltmeter. hourmeter. front and rear air pressure gauges. low air pressure light and warning buzzer. automotive-type ignition (common with upper), engine oil pressure gauge, water temperature gauge, fuel gauge, turn signal indicator, high beam light switch, adjustable defroster vents and circuit breakers.
• Additional Equipment -Standard
Front and rear fenders, air dryer, back-up warning alarm, cab steps, access ladder to rear carrier deck with hand grab rails, front/rear tow loops, mud flaps. and skidresistant finish on carrier deck.
• Additional Equipment -Optional
Engine block heater. ether injection starting package, spare tire and rim assemblies. towing shackles and engine monitoring system.
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
UnkaaBelt CONSTRUCTION EQUIPMENT
Travel Speeds and Gradeability ©
0 Engine Maximum Speed
Mph Km/h
50.43Cummins 6CTA 8.3 81.16
Maximum Gradeability at peak engine torque
44.1%
© Maximum speed based on full load r.p.m. Gradeability is based on peak torque of the engine and machine equipped with standard tires and G.V.W.
GENERAL INFORMATION ONl Y
Cummins 6CT A 8.3
6/4 4.5• (0.11 m) 5.32" (0.14 m) 504.5 cu. in. (8 267 cm3) 234 h.p. @ 2200 rpm 640 fl lbs. (867.72 J)12 volt negative ground 100 gallons (378.5 L) 80 amps 23.7 quarts (22.43 L) 13.2 c.f.m. (0.37 m3/min)
Engine
Cylinders I cycle Bore Stroke Displacement Gross engine power Peak torque Electric system Fuel capacity Alternator Crankcase capacity Air compressor
Axle Loads
G.V.W.© Upper facing front
Front axle .,
Rear axle
Base machine includes 35'-85' (10.67m- 25.91m) three-section boom with four-sheave head machinery, main winch with two-speed hoisting and power up/down, 600' (182.88 m) f (19mm) wirerope, 8x4, 8' (2.44m) carrier with ummins 6CTA 8.3 diesel engine, front bumper outrigger, lbs. /<0 lbs. l<a lbs. l<a
62,248 28 230 31,633 14 345 30,615 13 885 c;;ranger transmission, full fuel and hydraulics.
1,952 885 1,655 750 297 135 9,000 4 082 -4.416 6084 8,050 3 651 -3,950
-2 003 13,416-1 791 12,000 5 442
442 200 -58 570 259
1,758 797 2,287 1 037 2,200 998 2,791 1 266 1,040 472 122 55 1,128 512
-128
-529-591918 759 369 167
1,070 485 1,657 -587 -266 325 147 537 - -150 68 284 -230 104 188 136 62 136
-240-268416 344 751 244 129
8562 -
413 187 - -
110• (10.67m - 33.53m) 4-section boomCounterweight for single winch Counterweight for two winches Freefall main winch with 600' (182.88 m) rope Power up/down aux. winch with 465' (141.73 m) rope
Freefall aux. winch with 465' (141.73 m) rope 33' (10.06 m) lattice fly, stowed 25' (7.62 m) A-frame jib, stowed Hook block at bumper Headache ball at bumper Auxiliary lifting sheave Fly and jib stowage brackets 18.0 X 22.5 front tires and rims 12.0 X 20.0 rear tires with rims and wheels Counterweight removal system 120 54 -55 -25
21213442-
413175
96 -61 19
18779
© Adjust gross vehicle weight & axle loading according to component weight. Note: All weights are :t 3 % •
Maximum Front Axle Load Table
Tire Maximum Axle Load @ 50 mph (80.45 km/hf
16.5 X 22.5 H 18.0 X 22.5 H
39,500 lbs. (17 917 kg) 40,000 lbs. (18 142 l<g)
• For �s exceeding 50 mph (80.45 km/h) see Operator's Manual
0 • Link-Belt is a registered trademark. Copyright 1992.We are constantly improving our product( and therefore reserve the right to change designs and specifications.Link-Belt Construction Equipment Company Lexington, KentuckyA unit of Sumitomo Construction Machinery Co., Ltd.
Upper facing rear
Front axle Rear axle lbs. l<a lbs. l<a
14,672 6 653 47,576 21 577
3,093 1 403 2,215 1005
-1,1416,7856,069
-5173 077 2 752 1,981 899
243 110 199 90
991 450 767 348 1,170 530 1,030 467
1,684 764 -644-462
-292-210 1,590 721
- --
-
- --
-
395 179 -245-127
-111 -58 357 162
- --
-
- -- -
86 39 34 15
•
•
•
,..��F�li!,¥.Yh_'*:
·-- .. ,�"""'"I"'·�'
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com
This information is for reference use only. operators manuals should be consulted and adhered to. please contact ness campbell at [email protected] for further information.
portland office: 503.283.3111seattle office: 206.784.1054
www.nesscampbell.com