Triple Pack User Manual

Sirius Loop ASL120 is InWin’s addressable RGB case fan. The structure and fan blade design were

carefully considered to provide the optimal cooling for your PC’s internal components.

Product Story

Package Content

Sirius Loop Fans x 3

Fan RGB One-Click Controller x 1

Screws x 12 3-Pin Headers x 3

03

01 Please make sure the power is off.

04 Installing the 3rd fan: Repeat

02 Install the fans in your PC case and mount them in the designated areas.

Installation Guide

Connect the fan’s Addressable RGB Y-Cable to a motherboard’s 3-pin addressable RGB header. Connect the attached fan cable to the motherboard’s fan header.Installing the 2nd fan: Connect the Addressable RGB Y-Cable and connect it to the available 3-pin Addressable RGB header on the previous fan. Connect the fan to the available fan header from the previous fan.

The fan cable, Addressable RGB Y-Cable and their counterparts are attached to each. Please connect as followed:

2nd fan’s fan cable

2nd fan’s addressable RGBY-Cable

MotherboardFan Header

1st fan’s addressable RGBY-Cable

1st fan’s fan Cable

Motherboard’s 3-pin addressable RGB header

If your motherboard does not support an addressable header, please use the included Fan RGB One-Click Controller to connect to your PSU’s SATA cable and the fan’s Addressable RGB Y-Cable in order to use the 11 different of lighting effects.

1st fan’s addressable RGBY-Cable

3-Pin LED header1st fan’s addressable RGBY-Cable

2nd fan’s addressable RGBY-Cable

Fan RGB One-Click ControllerSATA Power Input

Hold the button to turn on or off the lights. Tap the button to change the lighting modes.

*InWin reserves the right to change the lighting modes.

1 7

2 83 94 10

5

6

11

RainbowBreathingFull CircleTwo-Tone RingLight at the end of the Tunnel

Diagonal TransitionLED-RedLED-GreenLED-BlueLED-White

Rotating LED Trio

Troubleshooting

Important Notes

If your fan does not operate properly, please follow the instructions below:1.Please check your system’s power.2.Please make sure all the connectors are connected properly.

1.Please install the fan by following our instructions.2.When storing the fan, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.3.Please do not put anything in the impeller.4.Please do not modify the wires or the connectors provided by InWin.5.Please do not touch the fan blades when the fan is in operation.6.Please only use your fan in a computer case.7.Please keep this product away from any liquids.

■ Specifications may vary based on different regions.

InWin Sirius Loop Fans

Specifications

Product NamePart NumberFan SizeMaterialRated VoltageRated PowerRated CurrentADD RGB Rated VoltageADD RGB Rated PowerADD RGB Rated CurrentSpeed ModeAir FlowAir PressureLEDConnectorNoise LevelBearing TypeLife ExpectationNet WeightPackage Dimensions(H x L x W)Warranty

Sirius Loop ASL120Triple Pack ASL120FAN-3PK120 x 120 x 25mmPBTDC12V1.2W0.1ADC5V1.25V0.25APWM 500~1800 RPM50CFM1.67mm/ H2OAddressable RGB4-pin27 dB(A) Max.Long Lifespan Sleeve Bearing>30,000 hrs600 g185 x 125 x 80mm2 Years

Copyright © 2019 InWin Development Inc. All Rights Reserved.