trio q data radios - omnicon · the trio q data radios are advanced high speed licensed digital...

Trio Q Data RadiosLicensed UHF | Ethernet and Serial DataQR450

The Trio Q Data Radios are advanced high speed licensed digital data radios, which provide both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.

Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Trio Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment.

Combining both Ethernet and serial connectivity, the Trio Q Data Radios are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.

1

Trio QR450

Radio

Frequency Range 400-450MHz (M-Band) or 450-520MHz (H-Band)

Frequency Splits Various Tx/Rx frequency splits - configurable

Channel Selection 3.125kHz channel steps

Channel Spacing 12.5 and 25kHz (software selectable)

Frequency Accuracy ±0.5ppm, -40 to +70°C (-40 to 158°F) ambient

Aging <= 1ppm/annum

Radio Modes Simplex and Half duplex

Configuration Configuration via embedded HTTP, HTTPS web interface & or Telnet/SSH/Serial console

Transmitter

Tx Power 0.05 to 10W (+17 to +40dBm) +/- 0.1dB configurable with over-temperature and high VSWR protection

Modulation Configurable narrow band digitally filtered binary CPM, 4, 8 and 16 level FSK

Tx Keyup Time <1ms

Timeout Timer Configurable 0 to 255 seconds

Tx Spurious <= -37dBm

PTT Control Auto (Data) / RTS line on Data Port

Receiver

AFC Tracking Digital receiver frequency tracking

Mute Configurable digital mute

Connections

Serial Com Port 1/2 1 x DB9 female connector providing 2 x RS-232 3-wire serial ports or 1x RS485 serial port (shared connector).

Serial Interface Speeds From 600bps up to 115,200bps

Serial Com Port Flow Control Configurable hardware / software / 3-wire interface

Serial Com Port DCD Control Configurable DCD operation : activated on RF carrier or from user data output

Ethernet Port 2 x RJ45: 10/100 Mbps (auto-MDIX sensing) compliant with IEEE 802.3

Antenna 1 x TNC female bulkhead

Power 2-pin locking, mating connector supplied

USB port Firmware Upgrade, Configuration & Diagnostics logs (Future release)

LED Display Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs and LAN LEDs

Ethernet

Ethernet Protocols Ethernet/IP (including UDP, TCP, DHCP, ARP, ICMP, STP, IGMP, SNTP & TFPT)

Ethernet Repeating Automatic and Self Learning Peer to Peer repeating

Operating Modes Layer-2 Ethernet Bridge mode / Layer-3 IP Router mode

Ethernet Traffic Filtering Configurable: No Filtering / Unicast Traffic & ARP Only / Unicast Traffic Only / List of approved MAC addresses

Compression Automatic Ethernet data compression

Terminal Server Legacy RS-232 serial support via embedded terminal server (UDP/TCP)

DHCP Modes Auto and Manual

SNMP SNMP V1,V2c, RFC 1213-compliant & radio diagnostics parameters (with traps)

Modbus Gateway Configurable MODBUS/TCP to MODBUS/RTU Gateway

Embedded Ping Tester Internal ping test facility

Specifications continue on the next page

Product Data Sheet Trio QR450Specifications

2

Trio QR450

Modem

RF Channel Data Rate # Region Bandwidth (KHz) Speed (Kbps) RF Sens (1x10E-6 BER)

FCC 12.5 8162432

-116-111-105-97

25 16324864

-114-109-103-96

ACMA/ETSI 12.5 8162432

-113-110-107-100

25 14284256

-114-109-103-96

Dynamic Speed Selection QoS/RSSI based Automatic Speed Selection or Fixed speed mode

Operating Modes Base, remote, repeater or store n’ forward

Channelshare+™ Advanced dynamic supervisory collision avoidance system

Backward Compatibility Backward compatible with Trio E-Series radios

Firmware Local and over-the-air flash-based firmware upgradable patches with support for broadcast updates

Security

Encryption* 256-bit AES

HTML Interface Password Protected HTTP and HTTPS configuration and management interface

Console Interface Password protected Telnet, SSH and Serial console interface

Password Protection Password protected configuration sessions

Diagnostics

Diagnostics Overview • NetworkmanagementanddiagnosticWindowsGUIsoftware• Network-wideoperationfromanyremoteterminal• Nonintrusiveprotocol–runssimultaneouslywiththeapplication• Storageofdataerrorandchanneloccupancystatistics• In-builtErrorRatetestingcapabilities• Diagnosticsparametersavailable

• TransmitterPower• ReceivedSignalStrength• DCSupplyVoltage• ReceivedFrequencyError• RadioTemperature• VSWR

Event Log Internal Event Logging facility

General

Operating Temperature Range -40 to +70°C (-40 to 158°F) ambient

Power Supply 13.8Vdc nominal (10-30Vdc)

Transmit Current 1.6A nominal @ 1W, 2.7A nominal @ 5W, 3.7A nominal @ 10W

Receive Current <330mA nominal @ 13.8Vdc

Housing & Dimensions Rugged die-cast, 115 x 34 x 164mm

Mounting Integrated Mounting Holes or DIN Rail mounting (optional)

Weight 0.5kg (1.1lbs.)

Warranty 3 years on parts and labor

Approvals and Certifications

Europe (ETSI) ETSI EN300113, EN301489, EN60950

FCC FCC PART 15, PART 90

Industry Canada IC RS119, ICES-001

Australia ACMA AS4295-1995 (Data)

Hazardous Locations CSA Class I, Division II, Groups (A,B,C,D) for Hazardous Locations ANSI/UL equivalent)

Product Data Sheet Trio QR450Specifications

3

TBURQR4ab-cccdeef represents the part number matrix

Model Trio Radio QR450

TBURQ Q Data Radios

Code Select: Unit Type

R Simplex/Half Duplex Radio

Code Select: Generic Frequency Band

4 UHF: 400 - 520 MHz Band

Code Select: Sub Band - UHF

L Low Band : 400 to 450MHz

H High Band : 450 to 520MHz

Code Select: Hazardous Area Approvals

H CSA & ATEX Hazardous (Standard)

Code Select: Modulation

E00 ETSI/ACMA Region

F00 FCC Region

Code Select: Encryption (subject to country of use)

E 256-bit AES encryption (standard)

N No encryption

Code Select: Licensed Feature

0L Serial Data Only (Two Serial Ports)

1L Ethernet & Serial (Three Ethernet & two Serial Ports)

Code Select: Power Supply

0 10-30V DC Standard

Example: TBURQR4LH-E00E1L0 specifies: Trio QR450 remote station, 400 to 450MHz, hazardous area approved, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, two Ethernet & two Serial Ports, 10-30V DC power supply

Communications Standards:FCC–FederalCommunicationsCommission(USA)IC–IndustryCanadaETSI–EuropeanTelecommunicationStandardsInstituteACMA–AustralianCommunicationsandMediaAuthority

* Export restrictions may apply. Contact your local representative for more details.

Note: Not all product features are available in every mode of operation.

Note: Some radio models may not be available in your country. Local and regulatory conditions may determine the performance and suitability of the radio in different countries. It is the responsibility of the buyer to ensure the radio model meets the regulatory conditions required. Contact your local Schneider Electric sales office for more details.

6

Product Data Sheet Trio QR450Model Code

Trio Q Data RadiosLicensed UHF | Ethernet and Serial DataQB450

The Trio Q Data Radio is an advanced high speed licensed digital data radio which provides both Ethernet and serial communications for the most complex and demanding applications in Point-to-Point and Point-to-Multipoint (Multiple Address Radio) Telemetry and remote SCADA systems.

Features such as ChannelShare+™, web-based user configuration, together with powerful remote diagnostics and Network Management, make Q Data Radios the complete licensed radio solution that works with all leading host systems and remote equipment.

Combining both Ethernet and serial connectivity, the Trio Q Data Radio are suitable for use with the latest SCADA technology as well as providing a smooth transition from serial-based infrastructure to IP/Ethernet.

1

Trio QB450

Radio

Frequency Range 400-450MHz (L-Band) or 450-520MHz (H-Band)





Aging <= 1ppm/annum

Radio Modes Simplex, Half duplex & Full duplex

Duplexer Optional external duplexer available for single antenna operation


Transmitter



Tx Keyup Time <1ms



PTT Control Auto (Data)

Receiver



Connections






Antenna 2 x N female bulkhead (seperate Tx and Rx ports - full duplex) or optional 1 x N female bulkhead (single Tx/Rx port - half duplex)

Power (Supply voltage options) 10-pin locking, mating connector supplied or optional (10-30Vdc/36-72Vdc) or 100-250Vac IEC socket



Ethernet












Product Data Sheet Trio QB450Specifications

2

Trio QB450

Modem


FCC 12.5 8162432

-116-111-105-97

25 16324864

-114-109-103-96

ACMA/ETSI 12.5 81624 32

-113-110-107-100

25 14284256

-114-109-103-96






Security





Diagnostics




General


Internal Fan Internal automatic thermostatically controlled fan

Power Supply 10-30Vdc (nominal) or optional 36-72Vdc or 100-250Vac power supply

Protection mode Full duplex (not protected) or optional half duplex (protected) hardware variants

Transmit Current** 4A nominal @ 1W, 5.1A nominal @ 5W, 6.1A nominal @ 10W

Receive Current** 1A nominal @ 13.8Vdc

Housing & Dimensions 19” 1 RU rack mount, 483 x 45 x 410mm

Weight 5kg (11lbs.)







Product Data Sheet Trio QB450Specifications

3

TBURQB4ab-cccdeef represents the part number matrix

Model Trio Radio QB450

TBURQ Q Data Radios


B Full Duplex Radio - 19” 1RU

P Half Duplex Protected Radio - 19” 1RU







N No Approval



F00 FCC Region



N No encryption


0L Serial Data Only (Two Serial Ports)



0 Redundant 10 - 30V DC Standard

1 Redundant -48V DC

2 Non-Redundant 110/240V AC

3 Redundant 110/240V AC

Example: TBURQB4LN-E00E1L0 specifies: Trio QB450 base station, 400 to 450MHz, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, three Ethernet & two Serial Ports, redundant 10-30V DC power supply.


* Export restrictions may apply. Contact your local representative for more details.** In high ambient temperature situations, the internal fans may operate, resulting in additional current consumption of upto 2 Amps.



6

Product Data Sheet Trio QB450Model Code

Trio Q Data RadiosLicensed UHF | Ethernet and Serial DataQH450

1




Trio QH450

Radio






Aging <= 1ppm/annum

Radio Modes Full duplex

Duplexer Optional external duplexer available for single antenna operation


Transmitter


Modulation Configurable narrow band digitally filtered binary GMSK, 4, 8 and 16 level FSK

Tx Keyup Time <1ms




Receiver



Connections (for each Base within the Hot Standby configuration)

Serial Data Port 1 x RS232 DB9 female connector providing 2 x RS-232 3-wire serial ports (shared connector). 300-38,400 bps asynchronous

Serial Data Port Flow Control Configurable hardware / software / 3-wire interface

Serial Data Port DCD Control Configurable DCD operation : activated on RF carrier or from user data output


Antenna 2 x N female bulkhead (seperate Tx and Rx ports - full duplex) or optional 1 x N female bulkhead (single Tx/Rx port - half duplex)

Power (Supply voltage options) 10-pin locking, mating connector supplied or optional (10-30Vdc/36-72Vdc) or 100-250Vac IEC socket



Ethernet





Ethernet Link Monitoring Monitor the Ethernet link between a base unit and up to two remote IP addresses








Product Data Sheet Trio QH450Specifications

2

Trio QH450

Modem


FCC 12.5 8162432

-116-111-105-97

25 16324864

-114-109-103-96

ACMA/ETSI 12.5 81624 32

-113-110-107-100

25 14284256

-114-109-103-96






Security





Hot Standby Controller

Change-over control Manual (forced) / automatic / remote (software driven)

Alarm Monitoring Tx Power Failure / Receiver Failure / Received Signal Frequency Error / Data Corruption / DC Power Supply Fail

Diagnostics




General



Power Supply 10-30Vdc or optional 36-72Vdc or 100-250Vac power supply

Protection mode Full duplex (not protected) or optional half duplex (protected) hardware variants

Housing & Dimensions Hot Standby is configured using 2 x QB450 (19” 1 RU each) plus 1 x Hot Standby Controller (19” 1 RU each) for a total of 19” 3RU’s (424.3 x 132 x 436.5mm )

Weight 15kg (33Ibs) excluding optional duplexer







Product Data Sheet Trio QH450Specifications

3

Model Trio Radio QH450

TBURQ Q Data Radios


H Full Duplex Hot Standby Kit (with controller) - 19 “ 3RUComprised of 2 x QB + Controller







N No Approval



F00 FCC Region



N No encryption




0 10 - 30V DC Standard

1 -48V DC

2 Single 110/240V AC

Code Select: Hot Standby Controller Options

A Common Tx/Rx Antenna

B Duplicated Tx/Rx Antennas

Note: Refer to the next page for further details on the Hot Standby Controller Options.

6

Product Data Sheet Trio QH450Model Code

TBURQH4ab-cccdeef represents the part number matrix

TBURQH4xx-xxxxxxxA • 2 x TBURQB4xx-xxxxxxx • 1 x TBURQHHSC-00A

TBURQH4xx-xxxxxxxB • 2 x TBURQB4xx-xxxxxxx • 1 x TBURQHHSC-00B

QB450

QB450

QB450

QB450

QHHSC Hot Standby Controller Option

A

B

LNA (Low Noise Receiver Amplifier / Splitter) RELAY (Coaxial Transmitter Switch) EXTERNAL DUPLEXER

Kit Con�gurationTx

Rx

QH450 - Hot Standby Controller Kit Configurations

16.69” (424mm)

18.87” (479.3mm)

15” (

381m

m)

5.19

” (13

2mm

)

16.7

” (42

4mm

)

15.9

1” (4

04.3

mm

)

ETH1 ETH2 ETH3COM 1/2

BA Auto

Select

QB450 USB

Factory Default

ETH1 ETH2 ETH3AUX

Pwr

Tx

COM1Rxd

Txd

Com2Rxd

Txd

ErrorNo

Yes

Sync

NoRx

< Green

< Red

QHHSC

15.9

1” (4

04.3

mm

)

16.7

” (42

4.3m

m)

17.18” (436.5mm)

Base A

COM 1/2

QB450 USB

Factory Default

ETH1 ETH2 ETH3AUX

Pwr

Tx

COM1Rxd

Txd

Com2Rxd

Txd

ErrorNo

Yes

Sync

NoRx

< Green

< Red

COM 1/2

COM 1/2 ETH1AUXBase B

COM 1/2 ETH1AUX

6

Product Data Sheet Trio QH450Dimensions and Options

© 2

013

Schn

eide

r Ele

ctric

. All

right

s re

serv

ed -

Febr

uary

201

4

Telemetry & Remote SCADA Solutions | www.schneider-electric.com Document Number TBULMxxxxxx-xx

QH450 - Hot Standby Full Duplex Radio - Dimensions

QHHSC - Option Descriptions

Description Antenna Type

A LNA (Rx) & RF Relay (Tx) Fitted

Common Tx/Rx Antenna

B Duplicated Tx/Rx Ports

Duplicated Tx/Rx Antennas

#Note–TheQH450isafullduplexradioplatformandmust be deployed with suitable band pass duplexer or external filters. Internal Duplexers are not available. Suitable duplexers include TBURDUPLXBP4XXCOA. For information regarding external duplexers, contact your local sales office.

Trio Q Data RadiosLicensed UHF | Ethernet and Serial DataQP450




1

Trio QP450

Radio






Aging <= 1ppm/annum

Radio Modes Simplex or Half duplex


Transmitter



Tx Keyup Time <1ms




Receiver



Connections






Antenna Optional: (See diagram at end of datasheet for detailed information) - 2 x N female bulkhead (Refer Option B) - 2 x N female bulkhead (Refer Option D) - 1 x N female bulkhead (Refer Option E)

Power (Supply voltage options) 10-pin locking, mating connector supplied or optional (10-30Vdc/-48Vdc) or 100-250Vac IEC socket



Ethernet












Product Data Sheet Trio QP450Specifications

2

Trio QB450

Modem


FCC 12.5 8162432

-116-111-105-97

25 16324864

-114-109-103-96

ACMA/ETSI 12.5 81624 32

-113-110-107-100

25 14284256

-114-109-103-96



Collision Avoidance Channelshare+™ - Advanced dynamic supervisory collision avoidance systemCarrier Sense - Carrier sense based collision avoidance system



Security





Diagnostics




General



Power Supply 10-30Vdc (nominal) or, for option B hardware, optional -48Vdc or 100-250Vac power supply

Protection mode Half duplex - Automatic or manual changeover between internal modules

Transmit Current** 4A nominal @ 1W, 5.1A nominal @ 5W, 6.1A nominal @ 10W

Receive Current** 1A nominal @ 13.8Vdc

Housing & Dimensions 19” 1 RU rack mount, 483 x 45 x 410mm

Weight 5kg (11lbs.)







Product Data Sheet Trio QP450Specifications

3

TBURQP4ab-cccdeef represents the part number matrix

Model Trio Radio QB450

TBURQ Q Data Radios


P Half Duplex Protected Radio - 19” 1RU







N No Approval



F00 FCC Region



N No encryption




0 10 - 30V DC Standard

1 -48V DC (Option B Only)

3 Dual 110/240V AC (Option B Only)

Code Select: Hot Standby Options

B Duplicated Tx/Rx Ports

D Separate switched Tx & Rx Ports

E Common switched Tx/Rx Port

Example: TPURQB4LN-E00E1L0B specifies: Trio QP450 Redundant half duplex radio, 400 to 450MHz, modulation for ETSI/ACMA regions, 256 bit Encryption enabled, three Ethernet & two Serial Ports, 10-30V DC power supply, Duplicated Tx/Rx Ports.


* Export restrictions may apply. Contact your local representative for more details.** In high ambient temperature situations, the internal fans may operate, resulting in additional current consumption of upto 2 Amps.



6

Product Data Sheet Trio QP450Model Code

Hot Standby Options

B

D

E

RELAY (Coaxial Transmitter Switch)

Tx/Rx

Tx/Rx

QP450

QP450Tx/Rx

Tx

Rx

QP450

QP450 - Hot Standby Half Duplex Options

6

© 2

013

Schn

eide

r Ele

ctric

. All

right

s re

serv

ed -

Febr

uary

201

4

Telemetry & Remote SCADA Solutions | www.schneider-electric.com Document Number TBULMxxxxxx-xx

QP450 - Hot Standby Half Duplex Radio - Dimensions

QP450 Hot Standby Option Descriptions

Description Antenna Type

B Duplicated Tx/Rx Ports Duplicated Tx/Rx Antennas

D Separate Switched Tx & Rx Ports

Separate Tx & Rx Antennas

E Common Switched Tx/Rx Port

Common Tx/Rx Antenna

Product Data Sheet Trio QP450Model Code

trio q data radios - omnicon · the trio q data radios are advanced high speed licensed digital...

Documents