trinity plugs for well completion

7/30/2019 Trinity Plugs for well completion

http://slidepdf.com/reader/full/trinity-plugs-for-well-completion 1/50



www.TRINITYTOOLRENTALS.com

Trinity Tools & Rentals, LLC products and services are subject to Trinity Tools & Rentals’ standard terms and conditions. For more information concerning the full line of Trinity Tools & Rentals

products and services, please contact y our authorized Trinity Tools & Rentals representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Trinity Tools

& Rentals, LLC. ©2008 Trinity Tools & Rentals, LLC. All rights reserved.

MISSION STATEMENT

Trinity Tool Rentals L.L.C. is committed to providing quality products and services that

will meet and exceed the expectations and requirements of our customers.

The management at Trinity Tool Rentals is committed to the continual improvement

of quality service and performance. Quality is the responsibility of every employee

and can only be accomplished by a united effort. Management also commits to

maintaining strong personal relationships with our customers as well as establishing

new relationships.

Trinity Tool Rentals is committed to providing cost effective solutions to all of your

servicing needs. We look forward to doing business with you in the near future.




Trinity Tools & Rentals, LLC products and services are subject to Trinity Tools & Rentals’ standard terms and conditions. For more information concerning the full line of Trinity Tools & Rent

products and services, please contact your authorized Trinity Tools & Rentals representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Trinity T


TABLE OF CONTENTS

I) SETTING TOOLS

A) Model B Mechanical

B) Model T Fury Hydraulic

C) Wireline Setting Tools

II) SERVICE TOOLS

A) Bridge Plugs

•CastIron

•ExtraRange

•PermanentMiniBridgePlug

B) Composite

•StandardPlug •Ball Drop Type

•Flo Back Type

•LongRangeType

C) Retrievable Bridge Plugs

•WR

•QUP

•TWR

D) Cement Retainers

•BallCheck

•SlidingSleeve

•PoppetValve

E)ServicePackers

•THD

•StormPacker

•TensionPacker

III) HYDRAULIC ONE-TRIP SETTING TOOLS

A) TFH (Trinity Full Hydraulic)

B) TT-TFH (Thru Tubing TFH)







For catalog updates, please refer to our online catalog at

www.trinitytoolrentals.com







SETTING TOOLS

Model B Mechanical

Model T Fury Hydraulic

Wireline Setting Tools







Trinity Model “B” Mechanical Setting Tool

for “B” Sleeve Valve Cement Retainers and “B-1” Bridge Plugs

TheTrinityModelBMechanicalSettingToolis designedtorun andset Trinity’sModelB SleeveValve

CementRetainerandModelB-1BridgePlug.Itiseasytooperateandhaslowmaintenance.

This tool incorporates both a stinger seal and built-in snap latch allowing the tool to be latched into the

retainer with set-down weight and released with up-strain and/or right hand rotation. This tool can be run

time after time by simply moving the drive housing into the running position. Disassembly is not required

every time.

The setting tool is available from 4 1/2” through 13 3/8” casing sizes.

This illustration

doesnotreect

all sizes







Trinity Model “B” Mechanical Setting Tool

for “Cast Iron” Sleeve Valve Cement Retainers

TheTrinityModelB MechanicalSetting Toolis designedtorunandsetTrinity’sModelB SleeveValveCementRetainer.Easyto operateandlow

maintenance are evident in the design. The tool incorporates both a stinger seal and built-in snap latch allowing the tool to be latched into the retainer

with set down weight and released with up-strain or right-hand rotation. This tool can be run time after time by simply moving the drive housing (slip nut

on smaller sizes) into place and installing new shear screws. Disassembly is not required between runs on the same location, but is recommended upon

returning to the shop. Tool sizes are available from 4 1/2 to 13 3/8 casing. Fewer moving parts and ease of operation make this tool a good addition

to your line. The Trinity Model B-1 Mechanical Set Bridge Plug can be run with this tool as well by removing items 23 through 27 and replacing item 1

with item 30.

INSTALLATIONOFRETAINERORBRIDGEPLUGONTHEMODELBMECHANICALSETTINGTOOL

1. Place the top cone of the retainer or bridge plug in the vise and tighten.

2. Apply grease to the stinger section of the setting tool.

3. Stabthestingersectionofthesettingtoolintotheretainerorplugusingaquickmotion.Ifnecessaryplaceablockofwoodacrosstheend

of setting tool and strike with a sledge hammer. The stinger needs to go in until the latch threads snap into the retainer threads.

4. (3.593-4.312OD)Placeapipewrenchontheslipnutandturntotheleftscrewingthelatchintotheretainer.

(5.687-12.000OD)Placeapipewrenchonthedrivehousingandturntotheleftscrewingthelatchintotheretainer.

5. Stop when the holes in the latch align with the holes in the body of retainer.

6. Installtorquescrewsfurnishedwiththeretainer.

7. (3.593-4.312OD)Aligntheholesintheslipnutwiththegrooveinthelowermandrel.

(5.687-12.000OD)Aligntheholesinthedrivehousingwiththegrooveinthelowermandrel.

8. Installshearscrewsinsettingtool.9. Place the mechanical slips over the slip nut.

10.(3.593-4.312OD)Withtheslipretainingsleevebuttedagainstthestopring,rotatetheslipretainingsleevedownoverthemechanical

slips. Tighten the set screw in slip retaining sleeve.

(5.375-12.000OD)Withtheadjustersleevebuttedagainstthestopring,rotatetheadjustersleevedownallowingtheslipretaining

sleeveoverthemechanicalslips.Tightenthesetscrewinadjustersleeve.

RUNNINGINSTRUCTIONS

1. The tool should be run at a moderate speed avoiding sudden stops.

2. Avoid right-hand rotation transmitted to the setting tool. As a precaution, after every 10 stands the tubing or drill pipe can be rotated to the

left by hand until torque is felt.

3. At desired setting depth, rotate tubing to the right a minimum of seven turns, releasing the slips onto the cone.

4. Pullintothetubinginonecontinuouspull.Seechartbelowtoviewtherecommendedtension.Itisimportanttocalculatethistension

through tubing stretch. Do not rely on weight indicators.

5. Afterdesiredpullisreached,lockdownthebreakonrigtoallowsettingforcetoreachretainer.Holdthetensionapproximatelyve

minutes,thenslackoffpipeandsetapproximatelyvetotenthousandpoundsweightdowninsuringretainerorplugissecurelyset.

Retainer Size Minimum Tension Maximum Tension3.593-4.312 22,000 lbs. 30,000 lbs.

5.375-6.312 30,000 lbs. 45,000 lbs.

7.125-12.00 35,000 lbs. 48,000 lbs.

TESTOPTIONS

1. Thetubingordrillpipecanbepressuretestedbysimplypullingupvethousandpoundsatthetoolandapplyingpumppressure

to the tubing.

2. Theretainercannowbetestedforseal-offbyapplyingpressuredowntheannulusorbyslackingoffvethousandpoundsweight

on retainer and applying pump pressure down the tubing and pumping into formation

? These tests are performed before the setting tool is released from the retainer

? Ifseal-offhasnotbeenaccomplished,up-strainonthetubingcanagainbeappliedandthetoolscanberetesteduntilseal-offis

accomplished

RELEASINGRETAINER

1. Hold an up-strain of approximately one thousand pounds on the tubing.

2. Applytorquetotherightuntiltorquescrewsaresheared.Eachscrewrequires200-400foot-pounds.3. Continue right-hand rotation for ten turns or until latch is felt releasing

? Afterreleasingfromretainer,thesettingtoolcanberelatchedintotheretainerwiththreetovethousandpoundsset-down

weight.Thisstabilizesattwothousandvehundredpoundswithrepetition.

? The valve will open when the stinger is fully engaged into the retainer and will close with a 2 inch upstroke at the tool. The

stinger will remain sealed in the bore as long as snap-out force is not exceeded.







Model “T” Fury Hydraulic Setting Tool

DESCRIPTION:

The Trinity Model “T” is a hydraulic setting tool used to set packers, bridge plugs, or cement reatiners.

FEATURES:

•Tubingconveyed

•Canpushtoolstobottomindeepordeviatedwells

•Tubingwillllanddrainautomatically

•Settingpressuremaybeadjustedbyvaryingthenumberofcylinders

•Threecylinders(pistons)standard

•SettingtoolwillcoupletoadapterkitsmadefortheBakerE-4PressureSettingAssembly

OPERATIONALPROCEDURE:

Run the Model “T” Fury 20 Hydraulic Setting Tool and Bridge Plug/Cement Retainer several feet below

thesettingdepth.Note:TheFurycirculationportsarelocatedbelowtheballseat.Theseportswillallow

thetubingtollgoingintheholeorforcirculatingamaximumrateof¼BPMwhilegoinginthehole.Well

uidmustcleanandfreeofdebris(sand)fortheHSTtoworkproperly.Warning:Thesettingsequencewill

begin at 1,253 psi differential pressure in the tubing “at the tool” (see below).

Pick up slowly to setting depth to remove slack from tubing string.

Drop a 5/8” diameter brass ball and slowly pump down until it has seated (monitor pressure increase).

Slowly pressure workstring to establish a 1,253 psi (1,753 psi max) differential pressure inside the tubing

“at the tool” to begin the setting sequence.

Setting pressure will vary depending on which Bridge Plug/Cement Retainer is being set. Maximum

differential pressure to set 50,000# shear stud is 3982 psi at tool.

Inordertoapplythepropersettingforcetothetool,bothhydrostaticandpumppressuremustbeconsidered.

RELEASINGPROCEDURE:

TheModel“T”FurywillreleaseassoonassubjectBridgePlugorCementRetainerisset.

NEVERoverpressurethetoolinattempttoshearoff.Ifunabletoshear,bleedofftubingandapply

overpull to value of shear stud to release the tool.

THRU-TUBING:

For Thru-tubing operations, Trinity Tools is exclusive provider of our

1.406 inch OD hydraulic setting tool.







For catalog updates, please refer to our online catalog at

www.trinitytoolrentals.com







Bridge Plugs

Cast Iron

Extra Range Bridge Plugs

Permanent Miniature Bridge Plugs

Retrievable Bridge Plugs

Composite







Trinity Big Boy Bridge Plug

Wireline Set

DESCRIPTION:

TheTrinityBigBoyBridgePlughasproventobeaproductthatcanbedependedon.Ithasexcellentrunningcharacteristics

and secure sets. The plug can be set on different types of wireline pressure setting tools, hydraulic setting tools or

mechanical setting tools.

TheBigBoyisdesignedforrapiddrill-outwhilemaintainingsufcientstrengthduringtheset.Thisplugsustainshigh

pressures and temperatures.

FEATURES:

•Electricwirelineset

•Drillable

•Castironconstruction

•Onepieceslips-hardenedtodepthofwickeronly

•SetsinanygradecasingincludingP-110

•Form-ttingmetalback-upspreventrubberextrusion

•Fortemporaryorpermanentservice

•Ratchetinglockringholdssettingforce

This

illustrationdoes not

refect all sizes







Trinity Big Boy Bridge Plug

Wireline Set

Also available in 30 in casing







Extra Range Bridge Plug

Wireline Set

This

illustration

does not

refect all sizes

DESCRIPTION:

The ExtraRangeBridge Plug isa specialtyplug for running through restrictions and then setting

securely in larger diameters below. These restrictions such as seating nipples often force tubing to be

pulledbeforewellservicecantakeplace.TheExtraRangeBridgePlugeliminatesthisinmanycases.

Should the plug need to be removed, it is recommended to use a mill. A plug of such a broad setting

range requires it to be made of mild steels and a milling process would be more acceptable.

FEATURES:


•Millable




•Runsthroughrestrictionstosetinlargerdiameters

NO PRESSURE RATING FOR EXTRA RANGE BRIDGE PLUGS

001-1406-000

001-1750-000

001-1906-000

001-2187-000

001-2281-000

001-2500-000

001-2750-000

001-3000-000

PART NO. O.D. MIN. MAX. GO

SETTING RANGE

SPECIFICATIONS

PLUG SETTING TOOL

1.406

1.750

1.906

2.187

2.281

2.500

2.750

3.000

1.610

1.905

2.156

2.375

2.441

2.875

3.187

3.487

1.995

2.441

2.765

3.000

3.343

3.500

3.920

4.154

1 1/2 Shorty

1 11/16 Mutli-Stage

1 11/16 Mutli-Stage

2 1/8 Mutli-Stage

2 1/8 Mutli-Stage

2 1/8 Mutli-Stage

2 1/8 Mutli-Stage

2 1/8 Mutli-Stage







Suggested Drilling Techniques

For Trinity Tools Sleeve Valve Retainers and Bridge Plugs

Thefollowingisageneralguideforthemostsuccessfuldrillouttechnique:

Bit– New,mediumtooth,hardformation.

Rotary speed – 80 R.P.M. normal (120 R.P.M. as required).

Weightonbit– Apply5,000–7,000lbsUntilthetopendofthecenterbodyofretainer

orplugisdrilledaway(3-5inchesfor4-1/2thru7:and5-9inchesfor7-5/8”andlarger

tools). Additional weight can now be applied across the full bit diameter (i.e. 4-1/2 bit

use 9,000-13,500 lbs. of weight).

Drill Collars – Minimum of 8 for 4-1/2 thru 5-1/2 tools – 12 or more for 7” and larger tools.

Spudding the work string and variations in rotary speed and set down weight should be used to aid in breaking up large

metalpartsandpreventingbit“tracking”.Oneormorejunkbasketsshouldbeusedabovethebitwhennormalcirculation

is employed.







Permanent Miniature Bridge Plug

APPLICATION/OPERATION:

Thepermanentminiaturebridgeplugisdesignedtosetincoiledtubingordrillcollars.Itisdesigned

towithstanddifferentialpressuresof10,000psiat350°F.Inhouse,thebridgeplugissuccessfully

pressuretestedat7,500psi.Thebridgeplugisavailableinfoursizes:0.750”,0.875”,1.12”,and1.37”, which can be set on slickline or electric line.

The permanent miniature bridge plug has opposed, case hardened slips located above and below a

threepiecerubberpack-offsystem,manufacturedoutofeitherHSN(HighlySaturatedNitrile)orViton.

The pack-off elements are contained by rocker action metal back-up rings that eliminate extrusion of

the elements at high temperatures and pressures. A ratchet lock ring retains the setting force applied

to the slips and pack-off to maintain a constant sealing pressure.

To assure centered setting of the small diameter plug in coiled tubing and/or drill collars, special

ribbed cones direct the slips to evenly spaced positions against the pipe. Should it be necessary

to remove a permanent bridge plug after setting, a milling process is recommended as the plug is

constructed of mild steel and is not considered drillable.

Theminiaturepermanentbridgeplugshavemanyadvantages:

1.ThesmallO.D.ofthebridgeplugsallowthemtoberunintubingwithsizerestrictionslikecoiled

tubing,andstillformauidtightsealagainstthetubingwall.

2.Inadditiontoelectricline,theplugsalsocanbesetwithapressureactivatedsafetyringhead

orajardownringhead.

3. Depending on the size of the bridge plugs, setting sleeves are available to attach

to the 0.875” setting tool.

AllPermanentMiniatureBridgePlugsarenowavailableinapump-throughcongurationwithacheck

valveratedtoastandardcrackingpressureof25psiandapressureratingto6,000psi.Adjustable

cracking pressures are available on request.

Trinity Tools is pleased to announce the successful design, testing and manufacture of the 0.750”Permanent Miniature Bridge Plug and 0.750” Multi-Stage Setting Tool. A 0.750” setting sleeve is used

on the 0.750” Multistage Setting Tool only.

Permanent Bridge Plug A = Size OD (“) B = Length (“)

0.750” Permanent Bridge Plug 0.750 10.80










Firing Heads

Dependingonthewellborespecicationsandtheparticularslicklineapplication,thesystemisassembledwitheithera

jardownringheadorapressureactivatedsafetyringhead.

Pressure Activated Safety Firing Head

Theoperatorlowersthebridgeplugintothewelltotherequireddepth.Wellborehydrostaticisusedinconjunctionwith

pumppressuretodeterminethecorrectamountofshearpinstobeplacedinthepressureactivatedsafetyringhead.

Whenthecorrectpressureisreached,thepinsshearallowingtheringpintostriketheignitor.Theignitorlightsafuel

cell which starts the release of a slow burning gas. This pressure moves the piston in the setting tool upwards to set th

permanent bridge plug within the coiled tubing. The grippers hold the bridge plug from sliding up and down the well, whi

the compressed elastomers form a sealing plug in the pipe. The shear stud in the bridge plug shears leaving the bridg

plug in the coiled tubing. The bridge plug is nonretrievable.

A) Half a brass pin shears at 1050 psi.*

B) A full brass pin shears at 2100 psi.*

Jar Down Firing Head

Thejardownringheadoperateswithmechanicalforceratherthanpressure.Awirelinetoolstringcompletewithweig

barandspangjarsisattachedtothesettingtool.Theoperatorrunstotherequireddepth,andjarsdownontothering

headshearingthepinandpushingtheringpinbodytostriketheignitor.Theignitorlightsafuelcellandthisstartsth

release of a slow burning gas. This in turn moves the piston in the setting tool upwards to set the permanent bridge plu

within the pipe. The grippers hold the bridge plug from sliding up and down the well, while the compressed elastomer

form a sealing plug in the pipe. The shear stud in the bridge plug shears leaving the bridge plug in the coiled tubing. Th

bridge plug is non-retrievable.

Permanent Miniature Plug Setting Range Wireline Setting SettingBridge Plugs Min Setting Sleeve ForceO.D. Tool(“) (“) (lbs)(“)

HSN Viton Min (“) Max (“)Packing Packing

0.750” PBP-0750-325 PBP-0750-350 0.750 0.875 See Note 0.750 0.750 2000Bridge PBP-0650-325 PBP-0650-350Plug

0.875” PBP-0875-325 PBP-0875-350 0.875 1.000 1.250 0.875 0.875 2000BridgePlug



Note: 0.750 Plugs must be specified on a per job basis in accordance with coil tubing size and wall thickness because of tolerance limits.

Various Elastomers sizes on request

SPECIFICATIONS







PDC Composite

Bridge Plugs

Standard Plug

Ball Drop TypeFlo Back Type

Long Range Type







Trinity PDC Composite Bridge Plug

DESCRIPTION:

The PDC Composite Bridge Plug are used for temporary isolation in multi-stage vertical or horizontal

completion operations. Comprised of proprietary composite material that ensures a low metallic

content, the Composite Bridge Plug can be quickly and easily milled and circulated back to surface.

FEATURES:•Canbesetonwireline,coiledtubing,

or production tubing

•Consistentdrilltimesof30minutesorless

•Canbesetonwireline,coiledtubing,orproduction

tubing using conventional setting tools

•Utilizesconventionalsettingtools

•Canbemilledordrilledwithcoiledtubingorarig

•Millablecastironslips

•Highdifferentialpressurerating

•“TopVenting”Bridgeconguration

allows for upper & lower equalization during drill outs.

•Lowtempandhightempmaterials

conducive to a wide range of environments

•Positivelock-upfeaturetoensure

plugs do not spin while milling

•Patentedprecisionshearingdevice

a Setting is done via a universal

setting sleeve and adapter.

•CustomO.D.plugsareavailable

upon request

OPERATING RANGES

LOW

TEMP

HIGH PSI

MID

TEMP

HIGH PSI

HIGH

TEMP

HIGH PSI

LOW

TEMP/

LOW PSI

PLUG SPECS

O.D.

inch

LENGTH

inch

SETTING

TOOL

CASING SPECS

O.D.

inch

WEIGHT

RANGE

lb/ft

MIN ID

inch

MAX ID

inch

2-3/8 4.7 1.995 1.995 1.750 16.380 Not YetAvailable

Magnum“A-1”,

Baker #5or Owen

Not Yet

Available

2-7/8 6.4-7.9 2.323 2.441 2.150

17.507.7 3.068 3.068 2.825

3-1/2 9.30-10.20 2.922 3.992 2.725

12.95 2.750 2.750 2.500

4 9.50-11.00 3.476 3.548 3.188

23.88

Magnum“A-1”,

Baker #10or Owen

4-1/2

9.50-13.5 3.920 4.090 3.570

15.10-17.10 3.754 3.826 3.440

18.80-20.00 3.640 3.640 3.375

300°F

10K PSI

400°F

10K PSI

250°F

10K PSI

250°F

8K PSIComposite/

HSN

Elastomer

Blue

Composite/

Viton

Elastomer

Blue

YellowComposite/

HSNElastomer

GreenComposite/

HSNElastomer Magnum

“A-1”,Baker #20or Owen

23.80

24.0

32.0

5 11.50-18.00 4.560 3.920

5-1/214.00 5.012 5.012 4.600

15.50-23.00 4.67 4.300

17.00-20.00 6.456 5.950

4.276

4.95

76.538

23.00-32.00 6.094 6.366 5.750

7-5/8 24.00-33.70 6.765 7.025 6.250

8-5/8 36.00-44.00 7.625 7.825 7.250

9-5/8 32.30-47.00 8.681 9.001 8.375

Not Yet

Available







Trinity PDC Composite Bridge Plug Pump Down

OPERATING RANGES

LOW

TEMP

HIGH PSI

MID

TEMP

HIGH PSI

HIGH

TEMP

HIGH PSI

LOW

TEMP/

LOW PSI

PLUG SPECS

O.D.

inch

I.D.

inch

LENGTH

inch

BALL

SIZE

inch

SETTING

TOOL

CASING SPECS

O.D.

inch

WEIGHT

RANGE

lb/ft

MIN ID

inch

MAX ID

inch

3-1/2

7.7 3.068 3.068 2.825

9.30-10.20 0.750 17.50 1.0

Magnum“A-1”,

Baker #5or Owen

Not Yet

Available2.922 2.992 2.725

12.95 2.75 2.75 2.500

4 9.50-11.00 3.476 3.548 3.188

9.50-13.5 3.920 4.090 3.570

1.3604-1/2 15.10-17.10 3.754 3.826 3.440 1.75

Magnum“A-1”,

Baker #10or Owen

250°F

10K PSI

300°F

10K PSI

400°F

10K PSI

250°F

8K PSI

GreenComposite/

HSNElastomer

YellowComposite/

HSN

Elastomer

BlueComposite/

HSN

Elastomer

BlueComposite/

Viton

Elastomer 24.0

1.900

2.125

Magnum“A-1”,

Baker #20or Owen

2.500

18.80-20.00 3.640 3.640 3.375

5 11.50-18.00 4.276 4.560 3.920

5-1/214.00 5.012 5.012 4.600

15.50 -23.00 4.67 4.95 4.300

17.00-20.00 6.456 6.538 5.9507

23.00-32.00 6.094 6.366 5.750

7-5/8 24.00-33.70 6.765 7.025 6.250

Fluid By-

pass port

Elastomer

Wiper

DESCRIPTION:

The PDC Composite Bridge Plug Pump Down Plug is utilized mostly for multi-stage horizontal

completions. Although Composite Plugs can be equipped with Pump Down Wipers, the PDC Composite

Bridge Plug Pump Down Plug enables the wireline, guns, CCL, plug and other BHA’s to be pumped to adesireddepth.Oncethedepthisreached,PDCCompositeBridgePlugPumpDownPlugs

are then set like a conventional bridge plug. Comprised of proprietary composite material and having

a low metallic content, the PDC Composite Bridge Plug Pump Down Plugs can be quickly and easily

milled and circulated back to surface using conventional milling, drilling with a rig and tubing, or with

coiled tubing.

FEATURES:•Canbesetonwireline,coiledtubing,













•Positivelock-upfeaturetoensureplugs do not spin while milling

•Patentedprecisionshearingdevice

a Setting is done via a universal



upon request







Trinity PDC Ball Drop Bridge Plug

DESCRIPTION:

MillE-Z™BallDrop:Aftersetting,thetoolremainsopenforuidowandallows

wireline services to continue until the ball drop isolation procedure has started.

Oncethesurface-droppedballispumpeddownandseatedintotheinnerfunnel

top of the tool, the operator can pressure up against the plug to achieve isolation.

FEATURES:

•Canbesetonwireline,coiledtubing,













•Positivelock-upfeaturetoensure


•Patentedprecisionshearingdevicea Setting is done via a universal



upon request

CASING SPECS PLUG SPECS OPERATING RANGES

O.D.inch

WEIGHTRANGE

lb/ft

MIN IDinch

MAX IDinch

O.D.inch

I.D.inch

LENGTHinch

BALLSIZEinch

SETTINGTOOL

LOW

TEMP/

LOW PSI

LOW

TEMP

HIGH PSI

MID

TEMP

HIGH PSI

HIGH TEMP

HIGH PSI

3-1/2

7.7 3.068 3.068 2.825

0.75 0 17.5 0 1 .0

Magnum


Not Yet

Available

250°F

10K PSI

YellowComposite/

HSNElastomer

300°F

10K PSI

BlueComposite/

HSNElastomer

400°F

10K PSI

BlueComposite/

VitonElastomer

9.30-10.20 2.922 2.992 2.725

12.95 2.75 2.75 2.500

4 9.50 -11.00 3.476 3.548 3.188

1.360

24.0

1.75Magnum

“A-1”,Baker #10

or Owen250°F

8K PSI

GreenComposite/

HSNElastomer

4-1/2

9.50-13.5 3.920 4.090 3.570

15.10-17.10 3.754 3.826 3.440

18.80-20.00 3.640 3.640 3.375

5 11. 50 -18 .0 0 4 .276 4. 56 0 3.9 20

5-1/2

14.00 5.012 5.012 4.600

1.900

2.125Magnum

“A-1”,Baker #20

or Owen

15. 50 -23.0 0 4.67 4.95 4.3 00

7

17.00-20.00 6.456 6.538 5.950

2.50023.00-32.00 6.094 6.366 5.750

7-5/8 24.00-33.70 6.765 7.025 6.250







Trinity PDC Flo Back Bridge Plug

CASING SPECS PLUG SPECS OPERATING RANGES

O.D.

inch

WEIGHT

RANGE

lb/ft

MIN ID

inch

MAX ID

inch

O.D.

inch

I.D.

inch

LENGTH

inch

SETTING

TOOL

LOW

TEMP/

LOW PSI

LOW

TEMP

HIGH PSI

MID

TEMP

HIGH PSI

HIGH TEMP

HIGH PSI

2-7/8 6.4-7.9 2.323 2.441 2.150

0.500 18.38Magnum


Not Yet

Available

250°F

10K PSI

YellowComposite/

HSNElastomer

300°F

10K PSI

BlueComposite/

HSNElastomer

400°F

10K PSI

BlueComposite/

VitonElastomer

3-1/2

7.7 3.068 3.068 2.825

9.30-10.20 2.922 2.992 2.725

12.95 2.75 2.75 2.500

4 9.50 -11.00 3.476 3.548 3.188

0.630

23.88Magnum

“A-1”,Baker #10

or Owen

250°F

8K PSI

Green

Composite/HSN

Elastomer

4-1/2

9.50-13.5 3.920 4.090 3.570

15.10-17.10 3.754 3.826 3.440

18.80-20.00 3.640 3.640 3.375

5 11.50 -18.0 0 4.276 4.560 3.920

5-1/2

14.00 5.012 5.012 4.600

23.80

Magnum“A-1”,

Baker #20or Owen

15.50-23.00 4.670 4.950 4.300

7

17.00-20.00 6.456 6.538 5.950

0.880 24.023.00-32.00 6.094 6.366 5.750

7-5/8 24.00-33.70 6.765 7.025 6.250

8-5/8(219.1)

36.00-44.00 7.625 7.825 7.250

1.25 32.0 Not Yet

Available9-5/8(244.5)

32.30-47.00 8.681 9.001 8.375

Fluid By-

pass port

Elastomer

Wiper

DESCRIPTION:

MillE-Z™Flo-Back:Whenthepressurebelowtheplugisgreaterthanthepressureabove,theone-way

check valve will allow the two zones to commingle. The operator can independently treat or test each

zoneandthenremovetheo-backplug(s)inonetripwithconventionalmillingordrillingtools.

FEATURES:

•Canbesetonwireline,coiledtubing,or production tubing


•Canbesetonwireline,coiledtubing,orproductiontubing using conventional setting tools





•“TopVenting”Bridgecongurationallows for upper & lower equalization during drill outs.


conducive to a wide range of environments •Positivelock-upfeaturetoensure


•Patentedprecisionshearingdevicea Setting is done via a universalsetting sleeve and adapter.

•CustomO.D.plugsareavailableupon request







Trinity PDC Long Range Bridge Plug

DESCRIPTION:

TheLongRange™compositefracplugisMagnum’slatestofferingtoenableoperatorstoisolate

wellbores in challenging applications. Because of the tool’s slim outer diameter and expansive

reach,TheLongRange™canpassthroughdamagedcasing,restrictedinternalcasingdiameters,

or existing casing patches in the well bore. This tool can be set on wireline or coiled tubing.

Comprisedofproprietarycompositematerials,TheLongRange™alsofeaturesdependablecast

iron slips, superior element sealing package, and a rigid core to ensure the plug passes through

the toughest of conditions.

FEATURES:

•Notungstencarbidebuttons!

•Canbedeployedonwirelineorcoiledtubing

•Designedforhorizontalorverticalwells

•Uniquepumpdownelementdesignrequireslessuidandpumppressure

to deploy plug horizontally

•Dependablecastironslipssecurepluginplace

•Settingisdoneviaauniversalsettingsleeveandadapter.

•Positivelock-upfeaturetoensurelockupofmultipleplugsinasinglewellbore

•CustomO.D.availableuponrequest

Casing Specs Plug Specs

Operating

rangesO.D.inch

O.D.inch

lengthinch

Setting

Tool

4 9.50-11.00 3.476 3.548 3.188

0.500 0.280

20.0 1.5

Magnum“A-1”,Baker #10

or Owen

250°F

6K PSI

GreenComposite/

HSNElastomer

4-1/2

9.50-13.5 3.920 4.090 3.570

15.10-17.10 3.754 3.826 3.440

5 11.50-18.00 4.276 4.560 3.920

5-1/2

14.00 5.012 5.012 4.600

21.0 1.5

Magnum“A-1”,Baker

#10, #20or Owen15.50-23.00 4.670 4.95 4.300

Ball

Size

inch

Ball

Drop

min

I.D.

inch

Flow

Back

min

I.D.

inch

max

I.D.

inch

min

I.D.

inch

Weight

Range

lb/ft







Retrievable

Bridge Plugs

WR

QUP

TWR







WR Wireline Set Retrievable Bridge Plug

DESCRIPTION:

TheWRBridgePlugcombinestheadvantagesofwirelinesettingwitheasyandreliableretrieval.Itis

commonly used for zone or well isolation during Fracturing, Acidizing, Cement Squeezing, Testing or

well head repair operations.

ThisBridgePlugisrunandsetonwirelineusingaBakerE-4WirelinePressureSettingAssembly.It

may also be run on tubing or coil tubing using an HST Hydraulic Setting Tool. The WR’s double acting

slips securely anchor the Bridge Plug against pressure differentials from above or below. The three

element pack off design ensures reliable sealing at high pressures and temperatures. The unique

equalizing valve design allows any pressure differential to be equalized before the Retrieving Head

is latched onto the plug. This feature is especially advantageous when retrieving the WR on endless

tubing.

FEATURES AND BENEFITS:

•Highpressureratedplug

•Exclusivetestmandrelallowstestinginnero-ringsoftheequalizingvalve

•Carbidetrimoptionavailableonslipshardcasingandlongeldlife

•Retrievableoncoiltubingorslicklinewithoptionalretrievingsystem

•Integralinternalbypassvalveopensrst,beforeslipsarereleased,toallowequalization

•Elastomeroptionsfordemandingandhostileenvironments.

•Overshotwashestothegageringtoimproveretrievalreliability

•Optionalinnermandrelallowshanginggaugesbelowplug

GENERAL APPLICATIONS:

•Testingandtreatingoperations

•Drillstemandproductiontesting

•Squeezecementing

•Stormpackerapplications







WR Wireline Set Retrievable Bridge Plug

MAXIMUM

WORKING

PRESSURE (PSI)

CASING

O.D. WEIGHT I.D.

GAUGERINGO.D.

RETRIEVINGTOOL

BAKERSETTING

TOOLIN LB/FT IN IN

39.00 6.625

33.70 6.7656.375

29.70 6.87526.40 6.969

7 5/8

24.00 7.025

6.62510-081-0750

-

#20

8,500

8,500

53.50 8.535

47.00 8.681 8.285

43.50 8.755

40.00 8.835

36.00 8.921

9 5/8

32.30 9.001

8.500

10-081 0950

6,000

6,000

CASING

O.D. WEIGHT I.D.

GAUGERINGO.D. TOO

RETRIEVINGL

RBAKESETTING

TOOLIN LB/FT IN

MAXIMUM

WORKING

PRESSURE (PSI) IN13.50 3.920

11.60 4.000

10.50 4.0524 1/2

9.50 4.090

3.800

18.00 4.276

15.00 4.4084.062

13.00 4.4945

11.50 4.560

26.00 4.548

23.00 4.670

4.250

10-081-0450 #10

20.00 4.778

17.00 4.892

4.500

17.00 4.892

15.50 4.9504.641

15.50 4.950

14.00 5.012

5 1/2

13.00 5.044

4.728

10-081-0550

32.00 5.675

28.00 5.7915.560

24.00 5.9216 5/8

20.00 6.049

38.00 5.920

35.00 6.004

5.658

10-081-0650

32.00 6.094

29.00 6.184 5.875

26.00 6.276

23.00 6.3666.023

20.00 6.456

7

17.00 6.5386.230

10-081-0700

#20

10,000

10,000

10,000

10,000

10,000

10,000

10,000

10,000

10,000

10,000

10,000







DESCRIPTION:

APPLICATIONS:

•Snubbing

•WellheadRemoval

•GasLift

•Abandonments

•WaterShutoff

•OffshoreCollisionControl

•ThruTubingPackerHanger

FEATURES:

•SourWellSuppression

•WellboreStimulation

•Pressure&TemperatureRecording

•Pump-SeatingforSlimholeCompletions

•SlicklineorElectricLineService

•H2SCO2 Service

QUP Retrievable Bridge Plug/Packer

The Retrievable Bridge Plug/Packer was designed for well control when nipples are dam-

aged or non-existent. The Retrievable Bridge Plug/Packer features the same patented

ratchet and release mechnaism of the QRTP which, has been used to successfully set andretrieve hundred of plugs.

As the inner mandrel is being drawn up, the steel screws in the slips ramp moves in the

slots in the gripper cage until they bottom out. This in turn pulls the ramp away from the

elastomer anchorage to the tubing wall. The Retrievable Bridge Plug/Packer can hold

pressures of up tp 7500 psi from both directions and still be retreiveable through restric-

tions.AstandardGSToolisrequiredtoreleasethistool.TheRetrievableBridgePlug/

Packer has been designed with small diameters, so it can be set anywhere in the produc-

tion tubing with slickline, e-line and/or coil tubing. Due to extreme downhole tempera-

tures, the elastomers may bond to the production tubing. However, the Retrievable Bridge

Plug/Packercanstillbejarredthroughtheelastomerwithoutbeingcaughtintheslips.







QUP Retrievable Bridge Plug/Packer

The Retrievable Tubing Packer was designed for well control when nipples are damaged or non-existent.

The QUP is an evolution of the Retrievable Tubing Packer (RTP).

Nominal Size

Maximum O.D.

Minimum I.D.

Setting Range

Setting Pressure (PSI)

Maximum Working Pressure (PSI)

Environment

2 3/8”

1.75”

0.650”

1.83” - 2.05”

8,000

*7,500

Standard or H2S

2 7/8”

2.22”

1.00”

2.28” - 2.55”

8,000

*7,500

Standard or H2S

3 1/2”

2.72”

1.312”

2.86” - 3.05”

8,000

*7,500

Standard or H2S

4 1/2”

3.75”

2.19”

3.826” - 4.02”

20,000

*7,500

Standard or H2S

Retrievable Tubing Packer (RTP).

Elastomers are located above the grippers

4 Serrated Gripper System

Bottom Sub with Mechanical Seal

Avalon Top Packer and the RTP straddle system

Released with and Avalon GS Releasing Tool

No centralizer on the prong

Patented Ratchet / Release Mechanism

Set on Electric Line

Ultimate Packer (QUP).

Elastomers are located below the grippers

2 Serrated Gripper / 1 Smooth Gripper

Bottom Sub with Mechanical and O-ring Seal

Two QUPs - straddle system

Released with a standard GS Tool

Centralizer pinned onto the prong body

Patented Ratchet / Release Mechanism

Set on Slickline / Electric Line

Comparison of QRTP and QUP

Specication Guide for QUP

Specication Guide on Elastomers

Advantages of the QUP

The QUP features the same patented ratchetand release mechanism of the QRTP which,

has been used to successfully set and

retrieve hundreds of plugs.

The QUP can hold pressures of up to*7500 psi from both directions and still

be retrievable through restrictions.

The QUP has been designed with smdiameters, so it can be set anywhere

the production tubing with slickline,

e-line and/or coiled tubing.

Due to extreme downhole temperatu

the elastomers may bond to the

production tubing. However, the QU

still be jarred through the elastomer

without being caught up in the slips.

As the inner mandrel is being drawn up, the

steel screws in the slips ramp moves in the

slots in the gripper cage until they bottom

out. This in turn pulls the ramp away from

the elastomers, thereby relaseing the

elastomer anchorage to the tubing wall.

A standard GS Tool is required to

release this tool.

• • •

•••

AUXILIARY

EQUIPMENT

NOTE: * Depending on tubing grade and conditions. Specialty sizes available on request.

•Pressure/Temperature

Recorders

•Kobes Equalizing Assembly

•Debris Catcher

•Choke Bean

•T-Input Valve

MaterialTEMPRATING

USEWITH H2S

USE WITHCO2

DO NOT USE DO NOT USE WITH

325o

F 325o

F YES Petroleum Oils, 10%

H2S, CO2

Brake Fluids

350o

F 350o

F YES Petroleum Oils,Gasoline,Transmission Fluid

Acetone, Hot Water Aminies, H2S over 2%

400o

F 400o

F YES Water<100C, Steam Dilute Alkali, Acids, Alcohols, Aliphatic Hydrocarbons, Aromatic Hydrocarbons,Synthetic Lubricants (Diesters),Petroleum Hydraulic, Fluids,Non-aggresives Lubricating oils

Water>150C,Concentrated Alkali, Aggressive LubricatingOils, Phosphate EstersMethyl Hydroxide

Viton

Fluoroelastomer

Highly Saturated

Nitrile (HSN)

The QUP is availthree different typelastomers. Othespecialty elastommaterials are avaupon request.







TWR Retrievable Bridge Plug

DESCRIPTION:

The TWR Retrievable Bridge Plug is available to set

in tubing sizes 2 3/8, 2 7/8, and 3 ½ inch.

The patented TWR Retrieveable Bridge Plug is usually set on wireline, but may be set with coil tubing

using a hydraulic setting tool. The bridge plug combines retrievability with the advantages of accurate

setting.

Thisbridgeplugisaeldprovenproductusedinfracturingandzoneisolationapplications.

FEATURES, ADVANTAGES AND BENEFITS:

•Maybelubricatedintothewellunderpressure

•Isolatetubingatanydepthforwellheadrepairs,simulatingortemporaryzoneabandonment

•Equalizingsystempriortoreleasing

•Straightpulltorelease

•Doubleactingslipsholdsecurelyagainstpressurefromaboveorbelow

•Maximumworkingpressure7,500psi

•Mayberunandretrievedonwirelineorcoiledtubing

•Notubingproleisrequiredforsetting

•Setinsinglerun

•Retrievedinasinglerun

•Usedasatest,productionorsafetyplugabove

other plugs

Tubing

Size Tool O.D.Max

Setting Range

Min

(in) (in) (in) (in)

2 3/8

2 3/8

2 7/8

3 1/2

1.80

1.85

2.25

2.70

1.90

1.95

2.35

2.95

2.050

2.160

2.500

3.100







Cement

Retainers

CAST IRON

Sleeve Valve

Ball CheckPoppet Valve







Trinity T-1 Sleeve Valve Cement RetainerTubing Set

DESCRIPTION:

The“T-1”SleeveValveCementRetainerisahighqualitytoolforsqueezecementing.Thesleeve

valve is controlled from the surface by simply picking up to close and setting down to open.

This Retainer is set on the tubing string or drill pipe using a mechanical setting tool. The tubing may

be tested before squeeze takes place. The valve is automatically closed when releasing retainer.

Conversion to wireline set is easy and requires minimal parts. The retainer sustains high pressure

and temperature.

FEATURES:

•Tubingset

•Drillable







This

illustration

does not

refect all sizes







Trinity T-1 Sleeve Valve Cement RetainerTubing Set

16

20

65 - 118

94 - 133

005-1412-000

005-1837-000

14.125

18.375

14.576

18.730

15.250

19.124

SPECIFICATIONS







Trinity Model “B” Sleeve Valve Cement RetainerWireline Set

DESCRIPTION:

TheModel“B”SleeveValveCementRetainerisahighqualitytoolforsqueezecementing.The

sleeve valve is controlled from the surface by simply picking up to close and setting down to open.

This Retainer is set on wireline pressure setting tools. This is followed with a tubing seal nipple and

the tubing string can be tested before the squeeze takes place. The valve is automatically closed

when nipple is removed.

Conversion to tubing set is easy and requires minimal parts. The retainer sustains high pressure

and temperatures.

FEATURES:


•Drillable







This

illustration

does not

refect all sizes







Trinity Model “B” Sleeve Valve Cement RetainerWireline Set

2 3/8

2 7/8

3.3 - 5.9

6.4 - 6.5

005-1750-002

005-2187-002

1.750

2.187

1.867

2.280

2.107

2.563

16

20

65 - 118

94-133

005-1412-002

005-1837-002

14.125

18.375

14.576

18.730

15.250

19.124







Trinity Model “A” Ball Check Cement RetainerWireline Set

DESCRIPTION:

TheModel“A”BallCheckCementRetainerscombineoutstandingfeatureswithdesignsimplicity.It

hasacompactdesignandsmallO.D.forfastrunning.TheModel“A”BallCheckCementRetaineris

economical, dependable and unsurpassed by any similar retainer on the market.

There are no springs, latches or sliding valves to complicate the operation. A simple ball-check acts as

aone-wayvalvetopreventbackowofuidsfromtheformationupthewell.

Theinternalsurfaceoftheretainerisnishedtoreceiveasealnippleforcementing.Theball-check

valve is located at the bottom. The retainer sustains high pressure and temperatures.

FEATURES:


•Drillable



•Setsinanygradetubing




This

illustration

does not

refect all sizes







Poppet Valve Cement RetainerTubing Set

DESCRIPTION:

The CR-00 is a premium Cement Retainer

designed to hold pressure from one direction.

FEATURES:

•Costcompetitive.

•Constructedwithdrillablematerials.

•Retainingringstoassistinpreventing

element extrusion.

•10,000psiratedat300º F.

•SetsinP-110casing.

•Springloadedvalveholdsdifferential

pressure from below only.

NOTE:AstabilizerwithaminimumO.D.

oftheretainerO.D.shouldalwaysbe

run on the seal stinger in a vertical well.

A minimum of two stabilizers should be

run in a deviated or directional well.

The second stabilizer at a minimum of

sixfeetabovetherst.

Tubing

Size

T&C

Weight

Plug

O.D.Set

Force Product

No.Max

Setting Range

SPECIFICATIONS

Min

(in) (in)(lbs) (lbs)(in) (in)

2 3/8

2 7/8

3 1/2

4

4.0-5.8

6.4-6.5

5.75-10.3

5.6-14.0

1.750

2.220

2.750

3.140

1.780

2.340

2.867

3.340

2.074

2.525

3.258

3.732

9,000

9,000

9,000

9,000

238CR-00

278CR-00

350CR-00

400CR-00







SERVICE TOOLS

THD Mechanical Service Packer

THD Storm Packer with

J-Disconnect Storm ValveTension Packer








DESCRIPTION:

The THD Mechanical Service Packer is designed for general purpose high pressure service work.

The THD uses keyed internal connections, allowing transmission of high torque through the packer

facilitating rotation of the drill string in high angle holes. The hydraulically operated upper hold-down

buttons anchor the packer with differential pressures from below. The packer has carbide trim buttons

and slips for high strength casing and longer service life.

FEATURES AND BENEFITS:

•Heavy-dutymandrelsupportshighhang-offweights

•Carbidetrimonbuttons,slipsanddragblocksforhardcasingandlongeldlife

•Quarter-turnset,straightpickupunset

•Integralinternalbypassforhighcirculationrates

•Optionalextralongtopandbottomconnectionsforeaseinhandling

•Optionaltooljointconnections

GENERAL APPLICATIONS:

•Testingandtreatingoperations

•Drillstemandproductiontesting

•Squeezecementing

•Stormpackerapplications







4 3.476 3.548 3.286 1.500

4-1/2 3.826 3.754 3.593 1.500

4-1/2 3.920 4.090 3.750 1.875 1.750

4.156 4.276 3.969 1.875 1.750

5

4.276 4.560 4.125 1.875 1.750

4.670 4.778 4.500 2.000 1.750

5-1/2 4.892 5.012 4.625 2.000 1.750

4.892 5.012 4.625 2.375 2.125

5.595 5.791 5.375 2.500 2.125

6-5/8

5.675 5.921 5.500 2.500 2.125

6.004 6.184 5.828 2.500 2.125

7 6.094 6.276 5.890 2.500 2.125

6.276 6.538 6.000 2.500 2.125

6.625 6.765 6.453 2.500 2.125

7-5/8

6.875 7.025 6.688 2.500 2.125

8.535 8.755 8.281 3.984 2.750

8.755 9.001 8.500 3.984 2.750

10.75 9.950 10.192 9.688 4.000 3.750

13 3/8" 12.347 12.715 12.000 4.000 3.750

PACKER

4-1/2" IF

TOOL JTTW613-13-CX48-72

TW613-10-CX32.75-45.54-1/2" IF

TOOL JT

4-1/2" IF

TOOL JTTW613-95-CX

4-1/2" IF

TOOL JTTW613-96-CX

2-7/8" IF

TOOL JTTW613-75-CX

2-7/8" IF

TOOL JTTW613-76-CX

2-7/8" IF

TOOL JT TW613-70-CX

2-7/8" IF

TOOL JTTW613-72-CX

2-7/8" IF

TOOL JTTW613-65-CX

2-7/8" IF

TOOL JTTW613-71-CX

2-7/8" IF

TOOL JTTW613-58-CX

2-7/8" IF

TOOL JTTW613-67-CX

2-3/8" IF

TOOL JT TW613-57-CX

2-3/8" IF

TOOL JTTW613-55-CX

2-3/8" IF

TOOL JTTW613-51-CX

2-3/8" IF

TOOL JTTW613-50-CX

2-3/8" IF

TOOL JTTW613-45-CX

ConnectionsCatalogue

Number

MIN. I.D.

(IN.)

24.0 - 29.7

9-5/8

43.5 - 53.5

32.3 - 43.5

17.0 - 26.0

33.7 - 39.0

29.0 - 35.0

26.0 - 32.0

28.0 - 35.0

24.0 - 32.0

14.0 - 17.0

14.0 - 17.0

11.5 - 18.0

20.0 - 23.0

9.5 - 13.5

18.0 - 20.8

9.5 - 11.0

15.1-16.6

CASING

O.D.

(IN.) Weight, #/ftMIN.

I.D.

MAX.

I.D.

MAX I.D.

(IN.)

MIN. I.D.

(IN.)









OPERATING PROCEDURES

Setting the Packer

Run the packer to setting depth. Run the tool slowly, approximately one stand per minute to 90 seconds, as with any hold

down type packer, to prevent dragging of the hydraulic hold down buttons. The unloader remains open while running in

the hole. At the setting depth, make the last motion upward, then rotate _ turn to the right at the packer, slack off on the

tubing, set down weight on the packer. This sets the slips, closes the unloader and compresses the packing elements.

Set down enough weight to achieve desired pack-off on the packer.

RELEASING PROCEDURE

Pick-up on the tubing at the packer to open the unloader. Allow time for the tubing and casing to equalize. Continued

upward movement of the tubing unsets the slips, relaxes the packing elements, allowing the packer to freely move uphole.

ForAuto-Jaypacker:toolautomaticallyre-jaysthepackerwithupwardmovementofapproximately12”;afterwhichthe

packermayberundownbelowitsinitialsetposition.IfrunningamanualJthepackermustberotatedbacktotheleft_

turn after picking up the packer to engage the Jay. The tool may now be moved and reset or pulled from the well.

After the THD Packer is set, pressure can be applied either above or below the tool. The unloader is held closed by the

compensating piston with pressure from below. This insures that the unloader valve remains closed during testing or

treating operations. Applied tubing pressure will also be applied to the hold down buttons, forcing them against the casing

wall and preventing upward movement of the packer. Pressure applied above the packer will be directed between the

compensating piston and the seal receptacle, also holding the unloader valve closed. This pressure will also force the

holddownbuttonstoretractintotheholddownbody,awayfromthecasingwall.Incaseswherethereisadifferential

pressure in favor of the tubing where trying to release the packer, applied casing pressure will retract the hold down

buttons, and balancing pressure across the unloader valve, making it easier to retrieve the packer.

PRESSURE AFFECTED AREAS

The THD packer is equipped with a compensating piston, the area which must be considered in tubing movement

analyses. The following chart indicates the piston and direction of the force acting on the mandrel due to pressure

differentialatthepacker.Otherfactorssuchastubingmovementduetotemperaturechange,pistoneffect,ballooning

and buckling must be considered separately to determine all the forces acting on the packer.








PRESSURE AFFECTED AREAS GUIDE

4 1.900 .34 DOWN 1.47 DOWN

2.063 .17 UP 2.97 DOWN

2.375 1.26 UP 3.69 DOWN

1.900 1.76 DOWN .58 DOWN

2.063 1.25 DOWN .95 DOWN

2.375 .17 DOWN 1.67 DOWN

2.063 1.76 DOWN 3.26 DOWN

2.375 .67 DOWN 3.98 DOWN

2.875 1.39 UP 5.53 DOWN

2.063 3.33 DOWN .68 DOWN

2.375 2.24 DOWN 1.39 DOWN2.875 .18 DOWN 2.95 DOWN

2.375 3.49 DOWN 3.08 DOWN

2.875 1.43 DOWN 4.64 DOWN

3.500 1.70 UP 6.99 DOWN

2.375 3.49 DOWN 4.52 DOWN

2.875 1.43 DOWN 6.08 DOWN

3.500 1.70 UP 8.45 DOWN

2.875 11.85 DOWN 6.36 DOWN

3.500 8.72 DOWN 8.71 DOWN

4.000 5.77 DOWN 11.57 DOWN

4.500 2.44 DOWN 13.99 DOWN

PKR.

SIZE(IN.)

TUBING

SIZE(IN.)

5-1/2

X

2-3/8"

5-1/2"

X2-7/8"

4-1/2

5

PRESSURE

ABOVE(IN.2)

PRESSURE

BELOW(IN.2)

7

&

7'5/8

6-5/8

X

2-7/8

9-5/8

4-1/2

(3.594)

EXAMPLE: Consider a 5-1/2” packer set on 2-3/8” tubing with the backside loaded and the tubing drycausing a 3,000 PSI differential at the packer. From the guide, pressure from above acts downon the mandrel across .67 in.

2. Multiply the pressure (3,000 PSI) by the area (.67 in.

2) results in

2,010 lb. tension at the packer over tubing weight required to open the unloader.







THD Storm Packer with J-Disconnect Storm Valve

DESCRIPTION:

TrinitytoolsJ-disconnectstormvalveisrunabovetheTHDcompression-setservicepackerorOmegamatic

storm packer to isolate the tubing below the packer for disconnection during a weather emergency or

surface-equipment repair.

The valve has a J overshot running tool, which a quarter turn disconnects. This quick, safe, cost-effective

well closing requires no tubing pulling. The valve can be repeatedly opened and closed, independent of the

disconnection feature, enabling packer-pressure testing before disconnection.

The heavy-duty bearing assembly enables free valve operation with the running string in compression,

easingoperationonoatingrigs.Beforepackerretrieval,thestringcanbereconnectedandthevalve

opened to equalize pressure.

APPLICATIONS:

•Weatheremergencies

•Wellheadrepair


•Theruggedalloy-steelconstructionensuresdependability.

•Theinternal-ush(IF)drillpipetool-jointthreadconnectionsprovideexceptional,eld-proventorsional

strength for rigs.

•Thesimple,eld-provendesigneasesvalveoperationandredressing.

•TheJ-tooldisconnectswithaquarterturnoftherunningstring,providingfast,efcientvalve

placement.

•Thevalvecanbeopenedandclosedrepeatedlywithtwoquickturns,independentofthe

disconnection feature, enabling the packer to be pressure tested before disconnection to ensure its

integrity.

•Theexpandableplugprovidesthrough-boreaccessforcirculationandwirelinedeployments.







THD Storm Packer with J-Disconnect Storm Valve

SPECIFICATIONS:

Size(in) (in) (in) (in)

Maximum OD Minimum IDStandard Thread

Connection

Product

7 5.500 1.500 3-1/2IF PECV1 7800

7-5/8 6.380 1.500 3-1/2IF PECV19400

1.500

9-5/8 8.000

3-1/2IF

PECV24300

2.130 4 - 1 / 2I F

PECV24400

11-3/4 10.250 2.130 4 - 1 / 2I F

PECV29800

13-3/8 11.500 2.130 4 - 1 / 2I F

PECV34000

16 14.000 2.130 4 - 1 / 2I F

PECV40600







Tension Packer

DESCRIPTION:

The T-32 Tension Set Service Packer is a heavy duty, full bore packer designed for Squeeze Cementing,

Acidizing, Testing or Fracturing operations. The use of this packer is especially desirable under conditionswhere the pressure differential is from below and the use of a compression packer is prohibited. The op-

posing slips enable the T-32 to remain packed off during pressure reversals. This Packer uses a depend-

ablethreeelementsystemtoreliablyholdhighpressuresathightemperatures.TheTSUnloaderisrun

inconjunctionwiththeT-32Packertoallowequalizationoftubingandannuluspressures.

ItmakesupdirectlytotheT-32mandreleliminatingextraneousconnections.Consideredthemost

rugged tension set service packer available, it is well suited for repeated and continuous use under the

harshest of conditions.

APPLICATIONS:

•Shallowtestingandtreatingoperations

•General-purposeservicework

•Squeezecementing

•Cased-holeproductiontesting


•Bi-directionalslipsholddifferentialpressure

from above and below

•Simplerigfriendly1/3turnatthetooltoset

and release

•Fullopening •Internalsafetyjoint

•Fieldprovendesign

•RunswithTSUnloaderwhichallowscirculation

ofwelluidsduringrun-in







Tension PackerSPECIFICATIONS:

StandardConnections

IN IN IN Box x Pin

4-1/2 3.92 4.09 3.750-450

3.750

3.610"

4.156 4.276 3.969-500

3.969

53.750"

4.276 4.56 4.125-501

4.1254.000"

4.67 4.778 4.500-551

4.500

5-1/24.485"

4.892 5.012 4.625-550

4.6254.500"

6.004 6.184 5.813-702

5.8135.750"

7 6.094 6.276 5.875-700

5.8755.813"

6.276 6.5386.000

-7016.000

7 3/4 6.560 6.5605.938"

6.625 6.765 6.453-751

6.4467-5/8 6.300"

6.875 7.025 6.688-750

6.6186.525"

8.535 8.755 8.250-951

8.2438.000"

8.755 9.001 8.500-950

8.5008.420"

9.282 9.56 9.000 8.875 9.000

9.660 10.050 9.375 9.250 9.375

10.050 10.192 9.625 9.250 9.375

11 3/4" 10.406 10.682 10.125 10.125 10.125

11 7/8" 10.711 10.711

11 3/4" 10.772 11.084 10.250 10.250 10.250

11.875 12.275 11.625 11.625 11.625

12.347 12.715

13 1/2" 12.340 12.340

13 5/8" 12.375 12.375

81.4

88.2

4-1/2 IF48 - 72

13 3/8"

77 - 102

12.125 12.125 12.125

65 - 80.5

4-1/2 IF71.8this weight casing may use either gauge ring size, 13B is the

preferred size for minimum extrusion gap.

42 - 60

10 3/4"

65.7 - 79.2

4-1/2 IF40.5 - 60.7

32.75 -51

9-5/8

43.5 - 53.5

4-1/2 IF

32.3 - 43.5

33.7 - 39.0

3-1/2 IF

24.0 - 29.7

29.0 - 35.0

3-1/2 IF

26.0 - 32.0

17.0 - 26.0

46.1

20.0 - 23.0

2-3/8 EUE

14.0 - 17.0

9.5 - 13.5 2-3/8 EUE

18.0 - 20.8

2-3/8 EUE

11.5 - 18.0

SpacerRingOD

CASING

GaugeRingOD ElementODO.D.IN

Weight, #/ft MIN.I.D.

MAX.I.D.

16 14.688 15.216 14.250 14.25014.18775 - 109 3-1/2" IF x MS

20 18.730 19.124 18.000 18.00017.87594-133 3-1/2" IF x MS







TFH

(Trinity Full Hydraulic)

DESCRIPTION:

The TFH (Trinity Full Hydraulic) is the most successful and widely used tool of its type in the

industry.Ithasaprovenrecordofperformanceinsomeofthemostdifcultcircumstances

intheGOMP&Amarketsince2009.Itcombinesthepump-through,singletripcapabilityofa

mechanical setting tool with the advantages of being able to work rigless and in the high angle

environments that favor use of a hydraulic setting tool.

APPLICATIONS:

•Shoe Squeeze

•Block Squeeze

•PlugandAbandonmentOperations

•Idealforuseinriglessoperations

•Idealforuseinhorizontaland“highangle”wellbores

•Also available for thru-tubing (CT) operations.


•Hydraulically set cement retainer and squeeze in one trip.

•Hydraulically set bridge plug and dump cement in one trip.

•Ability to circulate up to 1500 psi through tool while running tripping in hole.

Setting sequence begins with 1650 psi at tool.

•Ability to run tool in hole with “ball on seat”.

•Ability to perform casing and/or tubing tests after setting retainer

and prior to beginning squeeze operations.

7 5.375 5.595 - 6.135 10,000 - 32532 - 38

7 5.687 6.004 - 6.538 10,000 - 32517 - 35

7 5/8 6.312 6.625 - 7.263 10,000 - 32520 - 39

8 5/8 7.125 7.511 - 8.248 8,000 - 30024 - 49

9 5/8 8.125 7.511 - 8.248 8,000 - 30029.3 - 53.5

10 3/4 9.000 9.250 - 9.660 5,000 - 30060.7 - 81.0

10 3/4 9.437 9.660 - 10.192 5,000 - 30032.75 - 60.7

13 3/8 11.562 11.663 - 12.464 3,000 - 30077 - 102

13 3/8 12.000 12.175 - 12.715 3,000 - 30048 - 72

CASING

Pressure/Temp RatingO.D. Weight Plug OD Setting Range

SPECIFICATIONS







Thru Tubing TFH

DESCRIPTION:

The TT-TFH is designed to run and fully set either bridge plugs or cement retainers inside 2 3/8 or 2 7/8

inch tubing on coiled tubing then squeeze in one trip.

RuntheTT-TFH/SVCRtoolstringbelowthepredeterminedsettingdepth,pick-uptoremove

slack, drop a ½” diameter brass ball then, pressure the workstring to establish a 1,000-psi differential at

the tool to begin the setting process.

Continue pressuring the workstring to establish a 2,000-psi differential at the tool and hold for 5 minutes.

ThisallowsthecementretainerpackingsystemtoconformtothetubingID.

Continue pressuring the workstring to establish a differential at the tool to shear the cement retainer or

bridge plug disconnect.

Tubing

Size Tool O.D.Max

Setting Range

Min

(in) (in) (in) (in)

2 3/8, 4.0 - 5.9#

2 7/8, 6.4 - 6.5#

1.71

2.160

1.867

2.280

2.0414

2.563



QUALITY STATEMENT

Trinity Tool Rentals L.L.C. rents setting equipment, sells bridge plugs and cement

retainers, service (squeeze) packers, and retrievable bridge plugs for drilling, work

over, plug back, and P&A well services.

Trinity Tool Rentals strives to be an industry leader when it comes to providing quality

products and customer service.

TrinityToolRentalsL.L.C.toolsareinspectedandcompletelyredressedaftereveryjob.

Thisensuresconsistentperformanceandthehighestqualityoneveryjob.

Trinity Tool Rentals L.L.C. can effectively provide service, sales and rentals to all

land,inland,andoffshorelocationsthroughouttheGulfofMexicofromourHouma,

Louisiana location.

Quality, environment and safety are our top priorities at Trinity Tool Rentals L.L.C.

and we have a proven track record that ensures consistent performance with ourequipment, products and service.

trinity plugs for well completion

Documents