trimble certified training robotic surveying · course details: § total station calibrations,...

1
COURSE DETAILS: § Total Station Calibrations, Adjustments, & Parts § Trimble Access Job & Survey Style Settings § Station Setup & Resection Tips & Procedures § Trimble VISION Functions § Point Stakeout § Traversing & Traverse Adjustments § Cover the Various Measurement Methods TRIMBLE CERTIFIED TRAINING Robotic Surveying MAPLE GROVE, MN November 3, 2016 * Please make sure you have received registration confirmation from us BEFORE attending class. Class size is limited & classes fill up fast, so register TODAY ! Or Register on our website, at: www.frontierprecision.com SESSION DETAILS: LOCATION: 10900 73rd Avenue North | Maple Grove, MN 55369 TIME: 8:00 a.m. – 5:00 p.m. [Class starts at 8:15 a.m.] COST: $350.00 / Per Student DURATION: 1 - Day (Lunch is NOT included.) WANT MORE INFORMATION? CONTACT: Jay Haskamp, Applied Geospatial Engineer 2852 7th Street North, St. Cloud, MN 56303 jayh@frontierprecision.com 320.654.6511 or 800.944.8557 [Toll Free] 320.654.6520 [Fax] www.frontierprecision.com This one day session will cover working hands-on with Trimble S Series Robotic Total Stations & Access. Authorized Certified Trainer

Upload: duongthu

Post on 19-Oct-2018

224 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: TRIMBLE CERTIFIED TRAINING Robotic Surveying · COURSE DETAILS: § Total Station Calibrations, Adjustments, & Parts § Trimble Access Job & Survey Style Settings § Station Setup

COURSE DETAILS:

§ Total Station Calibrations, Adjustments, & Parts

§ Trimble Access Job & Survey Style Settings

§ Station Setup & Resection Tips & Procedures

§ Trimble VISION Functions

§ Point Stakeout

§ Traversing & Traverse Adjustments

§ Cover the Various Measurement Methods

TRIMBLE CERTIFIED TRAINING

Robotic SurveyingMAPLE GROVE, MN

November 3, 2016

* Please make sure you have received registration confirmation from us BEFORE attending class.

REGISTRATION CLOSES OCTOBER 24TH!

Class size is limited& classes fill up fast, so

register TODAY !

Or Register on our website, at: www.frontierprecision.com

SESSION DETAILS:LOCATION: 10900 73rd Avenue North | Maple Grove, MN 55369

TIME: 8:00 a.m. – 5:00 p.m. [Class starts at 8:15 a.m.] COST: $350.00 / Per Student

DURATION: 1 - Day (Lunch is NOT included.)

WANT MORE INFORMATION? CONTACT:Jay Haskamp, Applied Geospatial Engineer

2852 7th Street North, St. Cloud, MN [email protected]

320.654.6511 or 800.944.8557 [Toll Free]320.654.6520 [Fax]

www.frontierprecision.com

PRE-REGISTRATION IS REQUIRED!

This one day session will cover working hands-on with Trimble S Series Robotic Total Stations & Access.

Authorized Certified Trainer