tree stump slide - cre8play
TRANSCRIPT
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
A stump and a slide. How can it be this simple and yet so much fun?! Young players reach the top of the stump and slide down a 30” slide. Tree is constructed of durable Glass Fiber Reinforced Concrete (GFRC).
Revised 8/9/19
~ Dimensions and weights are approximate ~ ~ Heights shown from top of surfacing ~
User Group Age: 2-5
Tree Stump Slide1000224
L: 10’-6” x W: 4’-10” x H: 6’-2” 2,150 LBS
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !1 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
30”
10’-6”
4’-10”
Use Zone
Maintain Min 6’Use Zone
Item Description QuantityTree Stump Slide Play Equipment 1Anchor Bolt 1/2” x 3” Mounting Hardware 4-In-ground, 6-Surface mountHardware Kit Assembly Hardware 1
Included Items:
Product: 1000224
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !2 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
Product: 1000224 - In-Ground
1’-0” dia. Footing(See Detail)
Concrete Slab (See Detail)
8’-0”
6’-0”
In-Ground
Top of Surfacing
Concrete Footing(See Detail)
Ground Level
1’-6”
Concrete Slab (See Detail)
Varies
8’-0”
2’-6”3’-6”
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !3 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
Surface Mount
Concrete Slab (See Detail)
Varies
Concrete Slab (See Detail)
12’-0”
6’-0”
Product: 1000224 - Surface Mount
Top of Surfacing
Ground Level
2’-6”2’-8”
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !4 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
NOTES PRIOR TO CONSTRUCTION:
- Use appropriate equipment to lift and move the
play equipment.- Check local codes and requirements prior to
digging or installing any equipment.
WARNINGINSTALLATION OVER A HARD
SURFACE SUCH AS CONCRETE,
ASPHALT, OR PACKED EARTH MAY
RESULT IN SERIOUS INJURY OR DEATH
FROM FALLS.
WARNINGTHE REMOVAL OF HELMETS, HOODS,
DRAWSTRINGS, AND ACCESSORIES
AROUND THE NECK IS RECOMMENDED
TO PREVENT ENTANGLEMENT
AND STRANGULATION.
!
PLAY EQUIPMENT AND/OR
SURFACING MAY BE HOT.
NOTE: Read installation instructions thoroughly before starting installation process.
Step 1: Lay out the area and prepare the site for install. Concrete must be installed over a solid, level base. Check local soil condition and codes. See installation instructions sheet for minimum use zone requirements to ensure proper spacing and adequate surfacing area.
Step 2: Pour a concrete base for the Tree Stump Slide unit. Refer to the typical slab section on the typical footing page in these installation instructions. The concrete should be flush with the ground level. Allow time for the concrete to completely cure before continuing. For the in-ground installation, refer to the typical in-ground footing detail on excavating a hole for the the slide foot buck.
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !5 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
STEP 3 - Locate and place the Tree Stump Slide unit in its final installation location.
Step 5: Position the slide to the Tree Stump Slide unit.
Step 6: Bolt the slide to the Tree Stump Slide unit using hardware kit 8-01 (2 places) and hardware kit 8-02 (4 places).
Hardware Kit 8-01 (2 places)
STEP 4 - Bolt the slides foot buck to the slide following the manufacturer’s instructions and hardware.
Hardware Kit 8-02 (4 places)
Assembly Instructions
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !6 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
HARDWARE KIT 8-01 3/8" X 1 1/4“ BUTTON HEAD, PIN-IN, SS BOLT X23/8" FLAT WASHER, SS X23/8" SPLIT LOCK WASHER, SS X2
HARDWARE KIT 8-02 3/8" X 2 1/2“ BUTTON HEAD, PIN-IN, SS BOLT X43/8" FLAT WASHER, SS X43/8" SPLIT LOCK WASHER, SS X4
Button head bolt, lock washer and flat washer
Button head bolt
Flat washer
Lock washer
Step 7: See the hardware recommendation page and locate your anchor bolts, supplied by Cre8Play. Using the proper standard drill bit size noted in the installation table, drill the concrete to the appropriate hole depth (C).
Step 8: Insert the anchor bolt into the hole and tighten until the bolt is fully seated. Do NOT over tighten the anchor bolts.
Step 9: Refer to the surfacing manufacturer for installation of an approved impact attenuating play surface with a minimum of 6 feet in every direction.
Anchor Bolt Size
ANSI Standard Drill Bit Diameter
Anchor Head (Socket Size)
Diameter
Minimum Embedment
Hole Depth
1/2” x 3” 7/16” 3/4” 2 1/2” 3 1/2”
A B C
Installation Table
Anchor Bolt (Large Diameter Tapcon) Installation: Step 1: Drill Step 2: Anchor
Mounting Detail (Not to Scale)
USE THREAD LOCKING COMPOUND ON ALL THREADED FASTENERS
�
Tree Stump SlideProduct: 1000224
All images and concepts are Copyright © 2016, Cre8Play, LLC-All rights reserved. Cre8Play may change or modify this information as necessary and without notice.
~ All dimensions are approximate ~ User Group Age: 2-5 Last Revised 8/9/19
Page ! of !7 7
5121 Winnetka Ave N • Suite 108 New Hope, MN 55428
612.670.8195 [email protected]
cre8play.com
1’-6” Min.
1’-0”
2’-6”
Varies
2b Stone or Porous Block
Min. 3,500 PSI Concrete
3’-0” 2”
Typical Component Footing Detail Check local soil conditions.
(Not to Scale)
Top of Surfacing
Component
Ground Level
4”2”
2” 10”
Min. 3,500 PSI Concrete
Typical 4” Concrete Slab Section Check local soil conditions.
(Not to Scale)
#3 (3/8”) Dia. Rebar Grid or Sub Glass reinforced Concrete
Concrete Slab & Footing Details