traumacad web quick start guide - voyant health · 2014-07-31 · voyant health, ltd. 35 efal...
TRANSCRIPT
Voyant Health, Ltd.35 Efal StreetPetach-Tikva, 4951132, Israel
[email protected]@voyanthealth.comwww.voyanthealth.com
International: + 972-3-929-0929US: 866-717-0272Europe: 00-800-9290-9290
2.4
TRAUMACAD WEB
QUICKSTARTGUIDE
2
1. Select Patient Images 2. Select a Procedure
Orientation 4. Calibrate the image
5. Take Measurements6. Insert Templates7. Generate a Report8. Save a Case
Menu BarToolbar
Image Preview
Patient List
THE PLANNING PROCESS
Main ViewLe
ft Pa
nel
WE
B Q
UIC
K S
TAR
T G
UID
E
3
Search Images
Import Images
Use the option to import a folder of DICOM images to your local cache.In the menu, go to File Import Image option to
other image format.Go to File Open Case option to continue working on saved TraumaCad cases.
To begin pre-operative evaluation and planning, select the required patient images.
FINDING PATIENT IMAGES
To display a list of patients from Quentry or your local cache, click the radio button at the top of the main view.To search for a speci�c patient folder or image, enter your criteria in any one of the �lters and click the button.To preview images, click on the desired patient folder and select the images for planning.
WE
B Q
UIC
K S
TAR
T G
UID
E
4
WE
B Q
UIC
K S
TAR
T G
UID
ELOGIN TO QUENTRY
TraumaCad Web is available onQuentry at: www.quentry.com
To access your personal account, log in to TraumaCad web through Quentry with the temporary password provided.
On your �rst login, you will be required to change the password.
Forgot Password?Click to reset your password. A new password will be sent to your email address.
WE
B Q
UIC
K S
TAR
T G
UID
E
5
VIEW CASES SELECT PATIENTS
In the home page, select the View button to access your patient folders.
Choose Recent Patients, My Patients or My CareTeams and select any patient folder you wish to plan in TraumaCad. You can also look for a speci�c patient folder in the search box.
WE
B Q
UIC
K S
TAR
T G
UID
E
6
Select the relevant surgical or analysis procedure to be performed on the patient. Only the relevant templates and measurements for the chosen procedure are displayed in the application.
LAUNCH TRAUMACAD SELECT PROCEDURE
To start planning click on the TraumaCad icon in the study’s toolbar from the patients folders list or from the study viewer.
A window pops up, showing a list of items that can be opened. Select the images you wish to plan and click OK.
WE
B Q
UIC
K S
TAR
T G
UID
E
7
On the left panel, you can navigate between the 4 tabs:
de�ne image orientation and calibrationImageTemplates - insert templates to the image and manipulate themMeasurements - take clinical measurements and evaluationsReport - generate a report and save the case
PLAN YOUR SURGERY WE
B Q
UIC
K S
TAR
T G
UID
E
8
Specifying the orientation and calibration are mandatory steps that must be performed for each image.
orientation by selecting the AP or LAT radio button.2. Specify the side of the body shown in the image as Right or Left.
To use an image for quantitative measurements, the image must be calibrated to the actual bone size using one of three methods. Click one of the buttons below to use the required method:
Automatic - This is the default method, which is automatically selected if a known-size metal ball marker, VoyantMark or KingMark calibration device is detected in the image.
Manual - This method manually calibrates the image, and is useful when a non-standard marker is used. The ruler or circle tool can be used to calibrate the image.
Oversize - This method manually resizes the image by entering the
Click Accept to continue planning.
The calibration status of the image appears in the lower-right corner of the image in the TraumaCad main view.
Calibrate the Image
DEFINE IMAGE ORIENTATION AND CALIBRATION WE
B Q
UIC
K S
TAR
T G
UID
E
9
Select the manufacturer of the implant in the Manufacturer
Type of ImplantA list of implants matching your selection is displayed in the Implants tab.
enter the search text in the Look for text box and click Enter or click .
Select to locate an implant that is notpart of the selected procedure.
Select the implant in the Implants tab by double-clicking it ordragging and dropping it on the image.
The implant appears on the image together with an Implant Properties window. In the Implant Properties window, you can
Click the button to lock the window in place at your preferred location. You can close the window and re-open it by clicking the Implant Properties button located at the top-right corner of the template.
12
3
4
INSERT TEMPLATES WE
B Q
UIC
K S
TAR
T G
UID
E
10
TraumaCad provides a suite of orthopedic tools for measuring the actual anatomy in an image. Tools provide detailed illustrative diagrams describing how to use them, as well as wizards that guide you through the measurement process.
accessible from the Measurements tab and from the toolbar.
easy-to-use wizards. These wizards guide surgeons through the multi-step process of marking anatomical points on the image in order to calculate anatomical measurements.
The wizards provide both self-explanatory illustrative diagrams and textual descriptions of each step to be performed, while walking the surgeon through each step in the sequence.
MEASUREMENT TOOLS WIZARDS WE
B Q
UIC
K S
TAR
T G
UID
E
11
A report consists of the selected images with templates or measurements that were added and textual information describing the patient, the measurements, the surgical procedure to be performed and/or the implant to be used. A report is updated automatically as you begin working on your case.
Show Report - Displays an HTML report
Preview - Previews the image in a JPG format
Print Report - Prints an HTML report
Saves case to Quentry,PACS, a local folder or a memory stick.Saved cases include DICOM images and the HTML report.
Save Case
SAVE A CASE AND GENERATE A REPORT
HTML REPORT
WE
B Q
UIC
K S
TAR
T G
UID
E
12
TRAUMACAD TOOLS
Undo / RedoCancel / Redo the last step
Fit to ScreenFit the imageto full window size
LineDraw a linebetween two points
Draw a linearound a fragment
Free Hand LineDraw a curved lineon the image
Copy ImplantDuplicate a selectedimplant
FlipFlip a selected implantor fragment
RulerMeasure the distancebetween two points
CircleMeasure the diameterof any round object
AngleMeasure an angle
Interline AngleMeasure an anglebetween two lines
DeleteDelete a selected object
MoveMove an object
PanPan around the image
ZoomZoom in or outthe image
Text AnnotationAdd a textual annotationto the image
Window LevelAdjust the brightness/contrast of the image
Search for ImagesSearch for patientimages
New CaseOpen the entire case studies list
Change ProcedureChange the procedureselected for planning
Open CaseOpen a saved case
Save CaseSave a case
Arrow LineIndicate an area for further attention
WE
B Q
UIC
K S
TAR
T G
UID
E
Australian Sponsor:Brainlab Australia Pty. Ltd.205/27 Mars RoadLane Cove WestNSW 2066AustraliaPhone: +61 2 9424 3800Fax: +61 2 9424 [email protected]
CEpartner4UEsdoornlaan 133951 DB MaarnThe NetherlandsPhone: +31.343.442.524Fax: +31.343.442.162
© 2014 Voyant Health, Ltd. All Rights ReservedMK2U00148_C_TC_2.4_Web_QSG_EN