trasformatori e soluzioni tecnologiche completamente ......trasformatori monofase e...
TRANSCRIPT
-
Trasformatori e soluzioni tecnologichecompletamente personalizzabiliTransformers and technological customizable solutions
-
20081010-E324945
E324945-2008 October 09
2008 October 10
Issued to: TRASFO PROJECT SRLVIA CHEMELLO 1836075 MONTECCHIO MAGGIORE VI ITALY
Systems, Electrical Insulation - ComponentThis is to certify thatrepresentative samples of Class 155 (F) insulation system designated TPROJECT-155
Have been investigated by Underwriters Laboratories Inc.® inaccordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 1446 - SYSTEMS OF INSULATING MATERIALS - GENERAL, Edition 6
Additional Information: See Addendum for Ratings.
Look for the UL Recognized Component Mark on the product
Issued by: Reviewed by: Matteo Paleari, Engineer Assoc Proj Sander Nieuwenhuijzen, Team Leader Engineer
Underwriters Laboratories Inc. Underwriters Laboratories Inc.
Only those products bearing the UL Recognized Component Mark should beconsidered as being covered by UL's Recognition and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjuction with the required Recognized Marks.The Recognized Component Mark is required when specified in the UL Directory preceeding the recognitions or under “Markings” for the individual recognitions.
20081010-E324945B
E324945-2008 October 10
2008 October 10
Issued to: TRASFO PROJECT SRLVIA CHEMELLO 1836075 MONTECCHIO MAGGIORE VI ITALY
Systems, Electrical Insulation - ComponentThis is to certify thatrepresentative samples of Class 180 (H) insulation system designated TPROJECT-180
Have been investigated by Underwriters Laboratories Inc.® inaccordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 1446 - SYSTEMS OF INSULATING MATERIALS - GENERAL, Edition 6
Additional Information: See Addendum for Ratings.
Look for the UL Recognized Component Mark on the product
Issued by: Reviewed by: Matteo Paleari, Engineer Assoc Proj Sander Nieuwenhuijzen, Team Leader Engineer
Underwriters Laboratories Inc. Underwriters Laboratories Inc.
Only those products bearing the UL Recognized Component Mark should beconsidered as being covered by UL's Recognition and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjuction with the required Recognized Marks.The Recognized Component Mark is required when specified in the UL Directory preceeding the recognitions or under “Markings” for the individual recognitions.
La nostra AZIENDA
L’esecuzione di tutte le fasi produttive è realizzata all’interno del nostro stabilimento: dall’accettazione delle materie prime in magazzino al collaudo finale delle macchine prima della spedizione al cliente; dall’avvolgimento con diversi conduttori (rame e/o alluminio in forma di nastro, piattina, filo…) al montaggio dei trasformatori e reattanze con particolare attenzione ai dettagli costruttivi; dall’impregnazione sottovuoto con resina poliestere alla finitura dei prodotti stessi. Ci avvaliamo di personale qualificato, costantemente aggiornato sulle procedure interne del sistema di qualità, la cui esperienza lavorativa nel settore assicura la produzione di trasformatori e reattanze con elevati standard qualitativi e garantisce affidabilità e durata nel tempo dei componenti, aumentando significativamente la soddisfazione dei nostri clienti.
All production phases take place inside our plant: from the arrival of the raw materials at our warehouse to the final testing before shipping the goods to customers; from the winding of the coils with different conductors (copper and/or aluminum strip, plate, wire, etc.) to the precise assembly of our transformers and reactors; from the vacuum impregnation with polyester resin to the finishing of each manufactured machine.Furthermore, the great working experience of our staff, constantly updated on the internal certified procedures, ensures the production of high-quality transformers and reactors together with the reliability and durability of our components, increasing significantly the satisfaction of our customers.
La nostra PRODUZIONE Our PRODUCTION
Our COMPANYTrasfo Project Srl produce trasformatori e reattanze che vengono utilizzati in ambito eolico, fotovoltaico, elettrico e industriale. L’azienda è nata nel 1999 e vanta dunque un’esperienza pluriennale nella realizzazione di queste macchine.La produzione avviene totalmente in Italia e si concentra nella zona di Vicenza, dove i settori dell’elettromeccanica e dell’elettronica di potenza sono cresciuti negli anni, aumentando la loro eccellenza.I prodotti di Trasfo Project sono realizzati per il mercato italiano e per quello estero, e sono certificati ISO. Le caratteristiche principali dell’azienda sono la presenza di impianti d’avanguardia, la progettazione interna e il collaudo di ogni singolo prodotto. Tutto questo permette a Trasfo Project di realizzare prodotti di alta qualità, anche su misura.L’azienda è situata a Montecchio Maggiore (in provincia di Vicenza) e opera su un’area di circa 7000 mq.
Trasfo Project Srl ha ottenuto la Certificazione UNI EN ISO 9001 per la progettazione, realizzazione e collaudo di reattanze e trasformatori. Dall’ottobre 2010 il nostro sistema di isolamento per la classe F ed H è certificato con il marchio . I componenti sono progettati e realizzati secondo le norme europee EN, IEC, CEI, VDE, CSA-UL, BV, LLOYD’S REGISTER, DNV, R.I.Na. e secondo le specifiche dei singoli clienti.
Trasfo Project Srl has obtained UNI EN ISO 9001 certification for the engineering, manufacturing and testing of reactors and transformers. Since October 2010 the insulation system in H and F class is certified by . The components are designed and manufactured in accordance with international standards: EN, IEC, CEI, VDE, CSA-UL, BV, LLOYD’S REGISTER, DNV, R.I.Na. and according to customer specifications.
Trasfo Project Srl manufactures transformers and reactors for wind power, solar power, electrical and industrial applications. Established in 1999, our company has a long-standing experience in the production of these machines.The manufacturing process takes place totally in Italy near Vicenza, where the electromechanical and electronic power sectors have grown in importance over the years, reaching a high level of excellence.Our ISO-certified products are suitable for the Italian market as well as global markets. Cutting-edge facilities, in-house design and the final testing of each product are the main distinctive features of our company. All this allows Trasfo Project Srl to manufacture custom-made and high-quality transformers and reactors. The headquarters are located in Montecchio Maggiore (in the province of Vicenza), where the production department covers an area of about 7,000 sqm.
La nostra QUALITÀ Our QUALITY
-
La nostra PROGETTAZIONE Our DESIGNIl nostro ufficio tecnico sviluppa la creazione di tutti i progetti dei trasformatori e delle reattanze di nostra produzione, offrendo la migliore soluzione alle necessità tecnico-economiche del cliente per qualsiasi applicazione o per esigenze particolari (raffreddamento ad acqua indiretto o diretto, ventilazione naturale o forzata, perdite e rumorosità non elevate…). In seguito al ricevimento dell’ordine che riprende l’offerta redatta al cliente, i nostri tecnici mediante l’utilizzo di software 2D e 3D, elaborano i disegni di tutti i componenti costruttivi delle macchine prima di procedere alla produzione delle stesse presso il nostro stabilimento.
Our technical office develops all the projects related to the production of each transformer and reactor we manufacture. We offer the best possible solution for the economic and technical requirements of our customers for machines suitable to different applications or special needs (for instance, direct or indirect liquid cooling; natural or forced air; reduced losses and low noise levels, etc.). Once the order based on the offer sent to the customer is received, our technical office, using 2D and/or 3D software, designs all the structural components of every machine before starting their production in our manufacturing plant.
Le nostre sale prove interne dotate di apparecchiature all’avanguardia eseguono i test di routine delle norme IEC su ogni trasformatore e reattanze di nostra produzione. Per test particolari non realizzabili presso la nostra sede ci avvaliamo di laboratori esterni certificati, università o enti internazionali. Attualmente possiamo effettuare le seguenti prove:
Verifica delle dimensioniMisura dei rapporti di trasformazione e controllo polarità dei collegamentiMisura della resistenza negli avvolgimentiMisura delle perdite e della corrente a vuotoMisura delle perdite in corto circuito e della tensione di corto circuitoProva di isolamento a frequenza industrialeProva di isolamento con tensione indottaProva di riscaldamento
All transformers and reactors are checked with routine tests according to IEC international standards in our testing facilities equipped with latest generation equipment. For special tests, we rely directly on external and /or international authorities, such as universities or other organisations.We are able to perform the following tests:
Dimensional checkMeasurement of voltage ratio and vector relationshipMeasurement of winding resistanceMeasurement of no load losses and currentMeasurement of short circuit losses and voltageSeparate source AC withstand voltageInduced AC voltage testTemperature rise test
I nostri COLLAUDI Our TESTS
-
TRASFORMATORI monofase e trifaseSingle-phase and three-phase TRANSFORMERS
Trasformatore monofase integrato 108KVA per UPS
Single-phase integrated transformer 108KVA for UPS System
Autotrasformatore trifase 600KVA
Three-phase autotransformer 600KVA
Trasformatore trifase 710KVA per convertitore a 12 impulsi
Three-phase transformer 710KVA for 12 pulse converter
Trasformatore trifase integrato 2x75KVA per UPS
Three-phase integrated transformer 2x75KVA for UPS system
Trasformatore trifase alto isolamento 200KVA
Three-phase high insulation transformer 200KVA
Trasformatore trifase alto isolamento 40KVA
Three-phase high insulation transformer 40KVA
-
REATTANZE monofase e trifaseSingle-phase and three-phase REACTORS
Reattanza trifase AFE 130μH 1200Arms PWM 2,7KHz
Three-phase AFE reactor 130μH 1200Arms PWM 2,7KHz
Reattanza trifase uscita inverter 3,6KV 620μH 550A PWM 3KHz
Three-phase reactor output inverter 3,6KV 620μH 550A PWM 3KHz
Reattanza monofase lato DC 90μH 220A PWM 12KHz
Single-phase reactor DC side 90μH 220A PWM 12KHz
Reattanza trifase per batteria condensatori 100KVAr 189Hz
Three-phase reactor for capacitors banks batteries 100KVAr 189Hz
Reattanza trifase per batteria condensatori 50KVAr 0.766mH 81.6A
Three-phase reactor for capacitors banks batteries 50KVAR 0.766mH 81.6A
Reattanza monofase 300μH 4200A per filtro DC
Single-phase reactor 300μH 4200A for DC filter
-
REATTANZE E TRASFORMATORI con raffreddamento a liquidoREACTORS AND TRANSFORMERS with liquid cooling
Reattanza trifase AFE 160μH 750Arms PWM 5KHz (AN-WF indiretto)
Three-phase AFE reactor 160μH 750Arms PWM 5KHz (indirect cooling AN-WF)
Trasformatore trifase 139KVA per convertitore 6 impulsi (AN-WF indiretto)
Three-phase transformer 139KVA for 6 pulse converter (indirect cooling AN-WF)
Reattanza interfasica 2x165μH 2x700Adc (AN-WF diretto)
Interphase reactor 2x165μH 2x700Adc (direct cooling AN-WF)
Trasformatore trifase 550KVA per convertitore 6KAdc (AN-WF indiretto)
Three-phase transformer 550KVA for converter 6KAdc (indirect cooling AN-WF)
Reattanza monofase 470μH 1400Adc per filtro DC (AN-WF diretto)
Single-phase reactor 470μH 1400Adc for DC filter (direct cooling AN-WF)
-
Esecuzioni SPECIALISPECIAL executions
Trasformatore trifase 70KVA BT/BT inglobato in resina
Three-phase cast resin transformer 70KVA LV/LV
Autotrasformatore trifase 390KVA con reattanza monofase di carico 230KVA - 420V
Three-phase autotransformer 390KVA with single phase load reactor 230KVA - 420V
Banco di reattanze monofasi in aria lato DC 6KV 10mH 250Adc - 5mH 500Adc
Single-phase air reactors bank DC side 6KV 10mH 250ADC - 5mH 500Adc
Trasformatore trifase 160KVA inglobato in resina IP41
Three-phase cast resin transformer 160KVA IP41
Trasformatore tri-esafase 193/272KVA per convertitore 6 impulsi 40Vdc – 10KAdc
Three-hexaphase transformer 193/272KVA for 6 pulse converter 40Vdc – 10KAdc
-
Punctuality
Competence
Service
Quality
Professionality
Velocity
Trasfo Project SrlVia Chemello, 18 - 36075
Montecchio Maggiore (Vicenza) Italia
Tel. +39 (0) 444 492542 Fax +39 (0) 444 [email protected]
www.trasfoproject.com
VALDAGNO-RECOARO
VALDAGNO-RECOARO
MAGGIOREVia Sudie
ro